STMicroelectronics

STM32F205VGT7 - 120MHz Cortex-M3 MCU | STMicroelectronics

料号: STM32F205VGT7 ✓ 量产中
100-LQFP (14 x 14 mm) Package 120 MHz Speed 1 MB (1M x 8) Memory
最小起订量: 1 |

STM32F205VGT7 概述

The STMicroelectronics STM32F205VGT7 is a 32-bit Arm Cortex-M3 microcontroller operating at up to 120 MHz, with 1 MB of Flash memory and a 100-pin LQFP package measuring 14 x 14 mm. It belongs to the STM32F2 high-performance microcontroller family and provides 150 DMIPS while supporting 1.25 DMIPS/MHz. The device also includes the ART Accelerator for zero-wait-state Flash execution and an MPU for protected memory access.

A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, data memory, peripherals, and interface controllers on one device. The STM32F2 architecture sits within the broader hierarchy of Arm Cortex-M microcontroller -> 32-bit RISC processor -> embedded processing semiconductor. Its combination of real-time processing capability, extensive connectivity interfaces, and deterministic peripheral access makes it suitable for industrial controls, communications equipment, audio systems, and connected embedded products.

The STM32F205VGT7 offers 1 MB of Flash organized as 1M x 8 and operates with an Arm Cortex-M3 CPU at up to 120 MHz. Its ART Accelerator allows zero-wait-state execution from Flash, while the MPU supports isolated memory regions for operating-system and firmware protection. The 100-LQFP package provides 100 external pins for power, ground, clock, reset, programming, and peripheral connectivity. The exact operating voltage, SRAM capacity, peripheral list, and electrical limits should be confirmed in the manufacturer datasheet before design release.

The STM32F20x family architecture combines high-performance Flash execution with extensive serial connectivity. The dedicated MPU and high CPU throughput support more responsive control loops than general-purpose microcontrollers while retaining the software ecosystem associated with Arm Cortex-M3 devices. The manufacturer's family documentation identifies full compatibility throughout the STM32 family as an architectural design goal, which simplifies peripheral-driver reuse across related devices when their electrical and feature conditions are matched.

Typical uses include industrial automation controllers, networked embedded gateways, USB-connected control equipment, audio processing modules, and motor-control or sensor-hub products. For a new design, engineers should assess the available communication peripherals, memory requirements, package routing density, clock-tree configuration, and development-tool support before fixing the MCU in the PCB layout. The STM32F205VGT7 is also a practical candidate for legacy-platform maintenance because its 1 MB Flash capacity and 100-pin LQFP footprint provide a defined upgrade path without moving to a smaller package.

PCB implementation requires careful decoupling around every supply pin, short and symmetrical clock routes, a controlled reset network, and programming access that remains usable after assembly. Because the LQFP-100 footprint has fine-pitch leads, inspect solder bridges, pad alignment, and thermal copper on assembled prototypes. Firmware production programming should include proper option-byte configuration, boot-mode verification, and boundary scanning where required by the manufacturing process.

This product record combines the manufacturer's family and device information with distributor catalog details, exact-package alternatives, parameter comparisons, and practical design guidance. It supports faster engineering decisions by separating verified headline specifications from parameters that still require confirmation in the manufacturer datasheet.

直接替换替代料: STM32F205VGT7 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: STM32F205VGT7 (相同外形与封装尺寸) ——差异在于 Package, Flash Memory, RoHS Status, Camera Interface, Communication Interfaces.

STMicroelectronics
Package: 100-LQFP (14x14 mm)
RoHS Status: Compliant
Camera Interface: Yes (8/10/12/14-bit)
对比 STM32F205VGT7 →
STMicroelectronics
Package: LQFP100 (14x14 mm)
Flash Memory: 1 MB
RoHS Status: Compliant
对比 STM32F205VGT7 →
STMicroelectronics
Package: 100-pin LQFP (14 x 14 mm)
Camera Interface: Camera interface
对比 STM32F205VGT7 →

STM32F205VGT6

✅ 直接替换 ⚠️ 规格未核验
STMicroelectronics
📦 100-LQFP (14 x 14 mm)
ARM Cortex-M3 32-bit RISC · 120 MHz · 150 DMIPs · 1 MB (1M x 8) · 132 KB · 82 · 100-LQFP (14x14 mm) · 1.8 V to 3.6 V

联系询价

查看数据手册 →

STM32F207VGT6

✅ 直接替换 ⚠️ 规格未核验
STMicroelectronics
📦 100-LQFP (14 x 14 mm)
ARM Cortex-M3 · 120 MHz · 1 MB · 128 KB · 1.8 V to 3.6 V · LQFP100 (14x14 mm) · -40C to +85C · 82

✓ 有现货

$6.8182 / 个

查看数据手册 →

STM32F207VGT7

✅ 直接替换 ⚠️ 规格未核验
STMicroelectronics
📦 100-LQFP (14 x 14 mm)
32-bit ARM Cortex-M3 microcontroller · Arm Cortex-M3 32-bit RISC core · 120 MHz · 1 MB (1M x 8) · 128 KB plus 4 KB · 100-pin LQFP (14 x 14 mm) · USB OTG high-speed and full-speed · Ethernet MAC

联系询价

查看数据手册 →

STM32F205VGT7 最大额定值与电气特性

Product Type 32-bit Arm Cortex-M3 microcontroller
Maximum CPU Frequency 120 MHz
Flash Memory 1 MB (1M x 8)
封装 100-LQFP (14 x 14 mm)
Core Architecture Arm Cortex-M3
Instruction Set 32-bit RISC
Peak Performance 150 DMIPS
Performance per Frequency 1.25 DMIPS/MHz
Benchmark Dhrystone 2.1
Flash Execution Feature ART Accelerator with 0-wait-state execution
Memory Protection Unit MPU
安装类型 Surface mount
Packaging Tray
生命周期状态 Active
RoHS 状态 ROHS3 compliant

STM32F205VGT7 100-lqfp (14 x 14 mm) 引脚配置指南

STM32F205VGT7(100-lqfp (14 x 14 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

STM32F205VGT7 的 100-lqfp (14 x 14 mm) 封装引脚图

暂无详细引脚数据: STM32F205VGT7.

请参阅 数据手册 以查看完整引脚配置。

典型应用

STM32F205VGT7 适用于 6 应用s: Industrial Automation Controller, USB-Connected Embedded Control Unit, Connected Sensor Gateway, Audio Processing Module, Motor Control and Automation, Embedded Data Acquisition System.

🏭

Industrial Automation Controller

The STM32F205VGT7 fits industrial automation controllers that combine deterministic control loops with multiple communication interfaces. Its 120 MHz Arm Cortex-M3 core provides up to 150 DMIPS, while 1 MB of Flash supports control firmware, parameter storage, diagnostics, and industrial protocol stacks. The 100-LQFP package exposes more pins than compact 48-pin alternatives, allowing dedicated signals for digital I/O, communications, timers, and external interfaces. Engineers should use the manufacturer pin-definition table to assign every supply and peripheral connection, and should confirm the operating-temperature grade required by the deployed equipment.

🖥️

USB-Connected Embedded Control Unit

The STM32F205VGT7 is suitable for USB-connected control equipment requiring more memory and processing performance than a small general-purpose MCU. The 1 MB Flash configuration provides room for USB firmware, control logic, configuration data, and update code, while the Cortex-M3 core executes at up to 120 MHz with the ART Accelerator supporting zero-wait-state Flash operation. The 100-LQFP footprint offers sufficient pin access for USB routing, status indicators, sensing inputs, and actuator outputs. Validate USB signal routing, power requirements, impedance, and connector placement against the manufacturer hardware guidance.

🌐

Connected Sensor Gateway

The STM32F205VGT7 can serve as the processing center of a connected sensor gateway that must aggregate measurements and manage multiple serial links. Its 120 MHz Cortex-M3 core and 1 MB Flash balance real-time peripheral handling against a larger embedded firmware footprint. The 100-LQFP package makes it practical to expose several communication interfaces and digital sensor inputs without moving to a very large BGA design. For deployed gateways, check the exact peripheral set, operating voltage, temperature grade, and clock requirements before releasing the PCB, and provide stable local decoupling at each supply pin.

🎧

Audio Processing Module

The STM32F205VGT7 is appropriate for audio modules where real-time sampling control, communications, configuration, and system monitoring must share one microcontroller. The 120 MHz Cortex-M3 core offers 150 DMIPS for control-oriented processing, and the 1 MB Flash capacity can hold DSP routines, protocol handlers, and update logic. Its 100-pin package provides a practical pin budget for audio interfaces, control signals, and debug access. Clocking, converter interfaces, DMA channels, and required audio performance should be checked against the device documentation, while sensitive analog and digital sections should be partitioned to reduce interference.

🔧

Motor Control and Automation

The STM32F205VGT7 suits motor-control and industrial automation subsystems that require high-speed control computation alongside general-purpose connectivity. The 120 MHz Cortex-M3 core and ART Accelerator support responsive execution from Flash, and the 100-LQFP package offers ample pins for timer outputs, encoder inputs, control signals, and communications. The device should be selected only after confirming the required timer architecture, PWM resolution, analog channels, operating voltage, and thermal environment in the manufacturer datasheet. Keep switching-node and sensing paths separated from sensitive control traces to reduce electrical noise.

📡

Embedded Data Acquisition System

The STM32F205VGT7 supports embedded data-acquisition systems that coordinate sensors, buffering, timestamps, and communication tasks. Its 120 MHz Cortex-M3 core provides enough performance for concurrent control and communication routines, while 1 MB of Flash provides capacity for acquisition software and field-update code. The 100-LQFP package allows analog, digital, timing, and serial functions to be distributed logically across the board. Designers should verify the selected ADC characteristics, DMA behavior, input count, and sampling requirements in the manufacturer datasheet and keep high-current switching circuitry away from precision measurement inputs.

推荐产品汇总

STM32F205VGT7 STMicroelectronics 用于: Industrial Automation Controller, USB-Connected Embedded Control Unit, Connected Sensor Gateway, Audio Processing Module, Motor Control and Automation, Embedded Data Acquisition System STM32F205VGT7TR Tape-and-reel ordering form for automated assembly 用于: Industrial Automation Controller, USB-Connected Embedded Control Unit, Connected Sensor Gateway, Audio Processing Module, Motor Control and Automation, Embedded Data Acquisition System
What is the operating frequency of the STM32F205VGT7?
The STM32F205VGT7 operates at up to 120 MHz using its Arm Cortex-M3 core. According to the STMicroelectronics STM32F205xx and STM32F207xx datasheet, the device can deliver 150 DMIPS at 1.25 DMIPS/MHz, and its ART Accelerator permits zero-wait-state execution from Flash memory. This combination supports computationally responsive real-time control while retaining the familiar Arm Cortex-M3 software model and peripheral ecosystem.
How much Flash memory does the STM32F205VGT7 contain?
The STM32F205VGT7 contains 1 MB of Flash memory organized as 1M x 8. The DigiKey technical listing identifies this capacity, while the STMicroelectronics datasheet covers the STM32F205xx and STM32F207xx memory architecture. The 1 MB program-memory capacity is useful for bootloader code, communication stacks, logging functions, and application firmware, but the final memory budget should include code and data retention requirements.
What package and pin count does the STM32F205VGT7 use?
The STM32F205VGT7 uses a 100-LQFP package measuring 14 x 14 mm. The package designation and dimensions are identified in the STMicroelectronics device listing and distributor technical records. A 100-pin LQFP provides a greater peripheral-pin budget than smaller 48-pin or 64-pin devices, but requires tighter clearances during PCB layout and assembly. Use the manufacturer pin-description table when assigning every power, ground, clock, and signal connection.
Where can I download the STM32F205VGT7 datasheet PDF?
The official STM32F205VGT7 datasheet PDF is available from the STMicroelectronics product link in the technical documents section of this page. It is titled for the STM32F205xx and STM32F207xx device lines and describes the Arm Cortex-M3 core, memory architecture, electrical characteristics, package information, and peripheral behavior. Start with the pin-definition, clock, power-supply, and maximum-rating sections before finalizing the hardware design.
Where can I find the STM32F205VGT7 pinout?
The STM32F205VGT7 pinout is contained in the manufacturer datasheet for the 100-LQFP package. Use the package drawing and pin-description table together because the exposed 100-lead footprint includes multiple supply and ground pins that must be connected according to the recommended layout. Assign the PCB nets from that table rather than relying on visual package orientation alone, and verify programming, reset, boot, and debug pins during schematic review.
Where can I buy the STM32F205VGT7 online?
The STM32F205VGT7 can be requested through the Request a Quote form on this page, where the exact MPN and required quantity can be included. The device is an active 100-LQFP STM32F2 microcontroller with 1 MB of Flash and a 120 MHz Cortex-M3 core. Before ordering, confirm the unopened-tray packaging requirement, delivery timing, and the quantity needed for production and prototype builds.
What is the current price of the STM32F205VGT7?
The current commercial price for the STM32F205VGT7 should be obtained through the Request a Quote form on this page rather than from a static price table. A quoted order must identify the exact STM32F205VGT7 MPN, tray packaging, and quantity so that supply can be matched to the requested configuration. This approach also allows lead time and quantity requirements to be reviewed together before a purchase order is issued.
What is the lead time for the STM32F205VGT7?
The latest catalog record for STM32F205VGT7 states a lead time of 19 weeks, so procurement should not assume immediate replenishment. The device is listed as active and supplied in tray packaging. Submit the required quantity through the Request a Quote form on this page to obtain current scheduling information, because manufacturing availability and lead time can change independently of a product's active lifecycle designation.
Is the STM32F205VGT7 currently in stock?
The STM32F205VGT7 is an active catalog part, but current stock should be confirmed through the Request a Quote form on this page. A recent catalog record listed 33 units with a minimum order quantity of 1, while the product is packaged as a tray. Because inventory can change quickly, request the quantity and date needed rather than relying on the historical stock count when planning a production release.
What can replace the STM32F205VGT7?
The closest same-family choices are STM32F205VGT6, STM32F207VGT6, and STM32F207VGT7 when their electrical ratings, memory configuration, and firmware requirements are compatible. These candidates use the same 100-LQFP form factor, but firmware, peripheral, and qualification differences still require review. Cross-manufacturer replacements are not automatically interchangeable, so verify pin assignment, clock limits, memory, tooling, and peripheral behavior before substituting any part.
Can STM32F207VGT6 replace STM32F205VGT7?
STM32F207VGT6 can be considered for a 100-LQFP hardware substitution because it belongs to the related STM32F205xx and STM32F207xx family and retains the 120 MHz Cortex-M3 and 1 MB Flash class of device. It is not a blind software-compatible replacement: the STM32F207 family adds connectivity features, and the exact peripheral configuration and pin usage must be checked. Review the manufacturer datasheet and validate the modified firmware before production use.
STM32F205VGT7 vs STM32F207VGT6 - which is better for industrial control?
STM32F205VGT7 is preferable when a design only needs the established STM32F205 feature set, while STM32F207VGT6 is preferable when its additional connectivity is required in the same 100-LQFP class. Both use the high-performance Cortex-M3 architecture at up to 120 MHz and provide 1 MB-class Flash configurations. The decisive factors are the required USB, Ethernet, camera, or memory interfaces, supported firmware drivers, and qualification of the selected ordering code.
When should I choose STM32F205VGT7 instead of STM32F205VGT6?
Choose STM32F205VGT7 when the temperature grade and ordering code required by the product specification are the correct fit for the deployment environment. The two devices share the STM32F205VG identity, 1 MB Flash capacity, 120 MHz Cortex-M3 core, and 100-LQFP footprint, so their electrical differences are primarily associated with the ordering and grade suffix. Confirm the manufacturer temperature-grade table before deciding between them.
Is the STM32F205VGT7 suitable for USB and networked embedded products?
The STM32F205VGT7 is suitable for many USB-connected and networked embedded products because it combines a 120 MHz Cortex-M3 core, 1 MB of Flash, and the extensive connectivity resources of the STM32F2 family. The exact USB, Ethernet, and other interface configurations must be confirmed for the selected device variant in the manufacturer datasheet. Firmware development also requires the appropriate ST peripheral libraries, startup files, and debug configuration.
What are the key specifications of STM32F205VGT7 that engineers should know?
The STM32F205VGT7 combines an Arm Cortex-M3 core operating up to 120 MHz, 1 MB of Flash, 150 DMIPS performance, an MPU, and ART Accelerator zero-wait-state Flash execution in a 100-LQFP 14 x 14 mm package. Its active lifecycle status and ROHS3-compliant catalog entry make it suitable for industrial controls, connected equipment, audio modules, and embedded gateways. The 100-pin package offers ample I/O access but requires careful fine-pitch PCB layout.

工程参考数据: STM32F205VGT7 ——对比、设计指导和合规信息。

选型指南

Choose STM32F205VGT7 for a 100-LQFP design requiring the established STM32F205 feature set, 120 MHz Cortex-M3 performance, 1 MB Flash, and the specified ordering-code temperature grade. STM32F205VGT6 is the closest same-family option and is appropriate when its ordering-code grade satisfies the product specification and firmware expectations. Consider STM32F207VGT6 or STM32F207VGT7 when the additional STM32F207 connectivity resources reduce external circuitry, but review pin multiplexing, peripherals, interrupts, clocks, and driver support before substitution. None of the listed alternatives should be treated as automatically interchangeable solely because they use the same 100-LQFP footprint. Validate startup code, peripheral configuration, temperature grade, and production programming in the final design.

与替代料对比

参数 本产品 STM32F205VGT6 STM32F207VGT6 STM32F207VGT7
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 100-LQFP (14 x 14 mm) 100-LQFP (14 x 14 mm) - same 100-LQFP (14 x 14 mm) - same 100-LQFP (14 x 14 mm) - same
CPU Core Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3
Maximum CPU Frequency 120 MHz 120 MHz 120 MHz 120 MHz
Flash Memory 1 MB (1M x 8) 1 MB (1M x 8) 1 MB (1M x 8) 1 MB (1M x 8)
Peak Performance 150 DMIPS 150 DMIPS 150 DMIPS 150 DMIPS
Memory Protection Unit Present Present Present Present
Connectivity Positioning STM32F205 family connectivity set STM32F205 family connectivity set STM32F207 family with additional connectivity resources STM32F207 family with additional connectivity resources

关键差异点

  • Established STM32F205 configuration with 1 MB Flash and 120 MHz operation (对比 STM32F207VGT6)
  • Direct ordering-code fit for designs specifying STM32F205VGT7 (对比 STM32F205VGT6)
  • Same-package path for adding STM32F207 connectivity (对比 STM32F207VGT7)

设计说明

Route the 120 MHz clock system as a short, continuous path from the oscillator or clock source to the MCU, keeping it away from switching-node and high-current return paths. Place the manufacturer's prescribed decoupling capacitors close to the corresponding supply pins, with the smallest capacitors nearest the package and a larger bulk capacitor near the power entry point. Review the complete pin-definition table because all 100 LQFP leads must be assigned, including every supply and ground connection.

Design the supply network around the voltage and current limits stated in the manufacturer datasheet, including startup current, peripheral load, and the voltage needed for the selected 120 MHz operating mode. Provide a defined reset sequence and verify the reset and boot pins during power cycling. Do not infer the operating-voltage range from the MCU name; confirm the exact electrical constraints for STM32F205VGT7 before selecting regulators, capacitors, and power-source tolerances.

Use the manufacturer 100-LQFP footprint and pin table without visual inference. Check pad dimensions, pin numbering direction, solder-mask and paste design, and courtyard clearances against the package drawing. After assembly, inspect the 0.5 mm pitch leads for bridges and incomplete wetting. The QFP perimeter also restricts escape routing, so plan fanout and layer transitions early rather than relying on later modifications.

A package-compatible replacement is not automatically a firmware-compatible replacement. Before substituting STM32F205VGT6, STM32F207VGT6, or STM32F207VGT7, compare peripheral availability, interrupt behavior, clock-tree limits, pin multiplexing, memory organization, startup code, and the device identifier used by firmware. Also check the ordering-code temperature grade. Revalidate timing and communications after any substitution rather than treating the shared 100-LQFP footprint as sufficient evidence of equivalence.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The catalog record identifies the STM32F205VGT7 as ROHS3 compliant. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status are not established by the available product records.

数据核验日期: 2026-11-19 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

STM32F205VGT7 datasheet STM32F205VGT7 specifications STM32F205VGT7 pinout STM32F205VGT7 datasheet pdf STM32F205VGT7 100-LQFP STM32F205VGT7 120MHz STM32F205VGT7 1MB flash STM32F205VGT7 equivalent STM32F205VGT7 replacement STM32F205VGT7 vs STM32F207VGT6 STM32F205VGT7 price STM32F205VGT7 stock STMicroelectronics STM32F205VGT7 STM32F205VG application circuit

相关元器件 & 术语

STMicroelectronics STM32F205VGT7 STM32F205VGT6 STM32F207VGT6 STM32F207VGT7 STM32F2 Arm Cortex-M3 microcontroller 32-bit RISC processor embedded processing semiconductor ART Accelerator MPU 150 DMIPS 1 MB Flash 100-LQFP LQFP package family surface mount SMD industrial automation USB connected sensor gateway audio processing motor control RoHS Dhrystone 2.1
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情