STMicroelectronics

STM32F302CBT7 - 72MHz Cortex-M4 MCU | STMicroelectronics

料号: STM32F302CBT7 ✓ 量产中
2.5 V / 3.3 V Vdss 48-LQFP (7 x 7 mm) Package 72 MHz Speed 128 KB (128K x 8) Memory
最小起订量: 1 |

STM32F302CBT7 概述

The STMicroelectronics STM32F302CBT7 is a 32-bit Arm Cortex-M4 microcontroller operating up to 72 MHz, with 128 KB of Flash memory and a 48-pin LQFP 7 x 7 mm package. It combines a DSP-enabled Cortex-M4 core and floating-point unit with mixed-signal peripherals, including a 12-bit ADC capable of 5 MSPS, programmable-gain amplification, and comparators. The device is designed for compact, high-performance embedded control systems requiring mixed-signal measurement and real-time processing in a 48-pin surface-mount footprint.

A microcontroller such as the STM32F302CBT7 integrates a processor core, programmable memory, analog and digital peripherals, clock control, and communication interfaces into one semiconductor package. The STM32F3 family combines Cortex-M4 processing performance with fast analog conversion and timing resources. This places the device in the broader hierarchy of embedded processor, microcontroller, semiconductor, and electronic control component families. Its 128 KB Flash provides a practical balance between firmware capacity, board area, and cost for industrial, consumer, communications, and embedded-control products.

Key features include a maximum CPU frequency of 72 MHz, 128 KB of Flash, a 12-bit ADC with a 5 MSPS conversion rate, an Arm Cortex-M4 core with DSP and FPU capabilities, a memory protection unit, and dedicated comparators. The 48-LQFP package exposes enough I/O for mixed-signal products while supporting automated board assembly. Operation from 2.5 V and 3.3 V supply arrangements makes the MCU suitable for conventional embedded systems where system-level power requirements need to remain simple.

The Cortex-M4 architecture provides hardware integer arithmetic plus single-precision floating-point and DSP instructions, reducing the processing burden for motor control, signal conditioning, digital filtering, and control-loop workloads. The fast 12-bit ADC supports sampled measurements in industrial monitoring, power conversion, and sensor-interface systems. The ADC, comparators, and programmable-gain amplifier allow analog front-end functions to be consolidated around the MCU rather than implemented entirely through separate discrete components.

Typical applications include industrial sensor controllers, motor-control boards, power-supply monitoring, compact data-acquisition modules, communications equipment, and compact consumer products. Its 48-pin LQFP footprint is particularly useful when a design needs more I/O than a small 32-pin MCU provides but does not require the complexity or area of a 64-pin or 100-pin package. The combination of 72 MHz processing and 5 MSPS conversion can shorten control-loop latency in applications that sample rapidly changing analog signals.

PCB implementation should follow the manufacturer pinout and layout guidance, including correct VDDA and VSSA connection, appropriate decoupling, and controlled clock and analog routing. Avoid long traces between sensitive analog pins and their reference network, and maintain clean return paths beneath high-speed or switching nodes. Validate the final power, grounding, and decoupling arrangement against the device's reference schematic and electromagnetic-compatibility requirements.

This product page combines the manufacturer's core device description with package, sourcing, comparison, and design guidance. It also identifies practical replacement considerations for engineers evaluating the STM32F302CBT7 in new mixed-signal embedded-control designs.

直接替换替代料: STM32F302CBT7 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: STM32F302CBT7 (相同外形与封装尺寸) ——差异在于 Flash Memory, Package, ADC Resolution, Analog Features, CPU Core.

STMicroelectronics
Flash Memory: 128 KB
Package: LQFP-48 (7x7 mm)
对比 STM32F302CBT7 →
STMicroelectronics
Flash Memory: 256 KB
Package: LQFP-48 (7x7 mm)
对比 STM32F302CBT7 →
STMicroelectronics
Flash Memory: 128 KB
Package: 48-LQFP, 7 x 7 mm
ADC Resolution: 12 bits
对比 STM32F302CBT7 →

STM32F302CBT6

✅ 直接替换 ⚠️ 规格未核验
STMicroelectronics
📦 LQFP-48 (7 x 7 mm)
ARM Cortex-M4 with FPU · 72 MHz · 128 KB · 32 KB · 32-bit · 12-bit · 5 MSPS · 37

联系询价

查看数据手册 →

STM32F303CBT7

✅ 直接替换 ⚠️ 规格未核验
STMicroelectronics
📦 LQFP-48 (7 x 7 mm)
32-bit mixed-signal microcontroller · Arm Cortex-M4 with FPU and DSP instructions · 72 MHz · 128 KB · 128K x 8 bits · 12 bits · 5 MSPS · 12-bit ADC, PGA, and comparators

联系询价

查看数据手册 →

STM32F303CBT6

✅ 直接替换 ⚠️ 规格未核验
STMicroelectronics
📦 LQFP-48 (7 x 7 mm)
ARM Cortex-M4 with FPU · 72 MHz · 256 KB · 40 KB · 2.0 V to 3.6 V · LQFP-48 (7x7 mm) · -40C to +85C · 37

联系询价

查看数据手册 →

STM32F358CBT8

✅ 直接替换 ⚠️ 规格未核验
📦 LQFP-48 (7 x 7 mm)
Retains a 48-LQFP footprint and 128 KB Flash class while adding higher-feature STM32F3 peripherals and changing the ordering suffix.

📋 参考替代料(不在目录中)

STM32F358CBT6

✅ 直接替换 ⚠️ 规格未核验
📦 LQFP-48 (7 x 7 mm)
Same 48-LQFP footprint and 128 KB Flash class as the target, while peripheral resources and ordering-temperature grade differ.

📋 参考替代料(不在目录中)

STM32F302CBT7 最大额定值与电气特性

Product Type 32-bit ARM Cortex-M4 microcontroller
Maximum CPU Frequency 72 MHz
Flash Memory 128 KB (128K x 8)
CPU Core ARM Cortex-M4 with DSP and FPU
Architecture 32-bit RISC
Operating Voltage Options 2.5 V / 3.3 V
ADC Resolution 12-bit
ADC Conversion Rate 5 MSPS
Analog Features PGA and comparators
Memory Protection MPU supported
Programmable Memory CCM RAM
封装 48-LQFP (7 x 7 mm)
引脚数量 48 pins
安装类型 Surface mount
Product Class Mainstream mixed-signal MCU

STM32F302CBT7 48-lqfp (7 x 7 mm) 引脚配置指南

STM32F302CBT7(48-lqfp (7 x 7 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

STM32F302CBT7 的 48-lqfp (7 x 7 mm) 封装引脚图

暂无详细引脚数据: STM32F302CBT7.

请参阅 数据手册 以查看完整引脚配置。

典型应用

STM32F302CBT7 适用于 6 应用s: Industrial Sensor Controller, Compact Motor Control, Power Supply Monitoring, Rapid Data Acquisition Module, Communications Equipment, Consumer Control Product.

🏭

Industrial Sensor Controller

The STM32F302CBT7 fits industrial sensor controllers that require fast analog acquisition without allocating a separate high-resolution converter. Its 12-bit ADC operates at up to 5 MSPS, allowing the controller to sample rapidly changing sensor signals while the 72 MHz Cortex-M4 core performs filtering, calibration, and control calculations. The DSP and FPU features also support arithmetic-heavy signal processing. In an industrial design, the MCU can evaluate comparators and supervise thresholds through integrated mixed-signal resources. Engineers should still isolate external analog circuitry from switching nodes, provide a clean reference network, and verify temperature and EMC requirements against the final product specification.

⚡

Compact Motor Control

The STM32F302CBT7 is appropriate for compact motor-control subsystems where the controller must sample position, current, or voltage feedback and execute a control loop on the same board. Its 72 MHz Cortex-M4 core with DSP and FPU capabilities reduces the computational burden of filtering and current-loop algorithms, while the 5 MSPS ADC can acquire analog feedback at a useful rate. The 48-LQFP package provides a practical balance between I/O access and board size. For production use, validate PWM timing, encoder inputs, current-sense scaling, motor-startup behavior, and thermal performance across the complete power stage rather than relying only on the MCU specifications.

🔋

Power Supply Monitoring

The STM32F302CBT7 can supervise a compact power-conversion or power-supply module by combining analog measurement, threshold comparison, and control processing in one microcontroller. The 12-bit 5 MSPS ADC is suitable for monitoring converter feedback and operating signals, while the PGA and comparators support conditioning and protection functions. Its 128 KB Flash provides room for supervisory logic, fault logging, and communication routines, and the Cortex-M4 FPU can assist with filtering calculations. The controller should maintain separate analog and digital return paths, use the manufacturer guidance for VDDA and VSSA connection, and include startup and fault-response tests for the complete power system.

📊

Rapid Data Acquisition Module

The STM32F302CBT7 supports compact data-acquisition modules that need to capture analog waveforms while performing real-time digital processing. The 5 MSPS 12-bit ADC establishes a high sampling rate, while the 72 MHz Cortex-M4 core can execute filtering, scaling, peak detection, and data-packet preparation. The 128 KB Flash supports firmware and calibration tables, and the 48-LQFP package leaves room for external interface components. A high-quality acquisition design should control source impedance, select suitable sampling and anti-alias networks, and account for ADC settling and reference accuracy. Firmware must also distinguish input bandwidth from the ADC's sampling rate and avoid assuming that every sampled point has full accuracy.

🌐

Communications Equipment

The STM32F302CBT7 can serve as the embedded control processor in compact communications equipment where protocol handling, monitoring, and analog measurements are required on one board. Its Cortex-M4 core provides sufficient throughput for packet processing and control logic, while the 128 KB Flash provides space for protocol stacks and configuration. The available comparator and fast ADC resources can support signal monitoring or threshold functions around the communications channel. Package selection must be checked against the required serial interfaces and pin multiplexing, and the board should isolate communications traces from sensitive analog paths. Firmware timing, clock-tree configuration, and peripheral pin remapping should be validated with the complete system requirements.

🧩

Consumer Control Product

The STM32F302CBT7 is suitable for compact consumer products that combine touch, analog sensing, and embedded control in a 48-pin surface-mount package. The integrated 12-bit ADC, PGA, and comparators can reduce the number of external signal-conditioning components, while the Cortex-M4 DSP and FPU capabilities support responsive product logic. At 72 MHz, the device can combine user-interface updates with control and communication tasks without requiring a separate processor. The LQFP 7 x 7 mm outline can simplify assembly compared with larger fine-pitch packages. Before production, verify the exact pin multiplexing, ADC noise performance, EMC emissions, and consumer-product environmental requirements, because the mixed-signal performance still depends on careful component selection and layout.

推荐产品汇总

What is the STM32F302CBT7?
The STM32F302CBT7 is an active STMicroelectronics mixed-signal microcontroller built around a 32-bit Arm Cortex-M4 core. It operates up to 72 MHz, provides 128 KB of Flash, includes a 12-bit 5 MSPS ADC, PGA, comparators, DSP, FPU, MPU, and CCM resources, and is packaged in a 48-LQFP 7 x 7 mm outline. The manufacturer identifies it as a mainstream mixed-signal MCU for embedded-control and fast analog-conversion applications.
How much Flash memory does the STM32F302CBT7 have?
The STM32F302CBT7 provides 128 KB of Flash memory organized as 128K x 8. This storage capacity accommodates boot code, application firmware, configuration data, and parameter tables for compact control systems. According to the STMicroelectronics product description, the device belongs to the STM32F3 mixed-signal family and operates with a 72 MHz Cortex-M4 core. Use the manufacturer programming and memory-map documentation when creating the linker and boot layout.
What is the maximum CPU frequency of the STM32F302CBT7?
The maximum CPU frequency of the STM32F302CBT7 is 72 MHz. Its Arm Cortex-M4 core includes DSP and FPU capabilities, allowing high-speed control tasks, filtering, and floating-point calculations without relying on a separate accelerator. The manufacturer's product page confirms the 72 MHz operating rate, 128 KB Flash configuration, and mixed-signal feature set. Clock selection, PLL settings, and power-state transitions must be configured using the device's reference manual and firmware support.
What ADC performance does the STM32F302CBT7 provide?
The STM32F302CBT7 includes a 12-bit ADC capable of 5 MSPS conversion. This sampling rate allows it to capture rapidly changing analog signals in data-acquisition, motor-control, and industrial monitoring systems. The manufacturer also identifies a programmable-gain amplifier and comparators within the mixed-signal feature set. ADC accuracy remains dependent on reference quality, source impedance, acquisition timing, grounding, and PCB layout, so follow the analog-layout recommendations in the datasheet.
What package does the STM32F302CBT7 use?
The STM32F302CBT7 uses a 48-LQFP package measuring 7 x 7 mm. The LQFP form factor provides 48 pins and is suitable for automated surface-mount assembly. STMicroelectronics describes the device as a 48-pin mixed-signal MCU, while the distributor product listing confirms the LQFP 7 x 7 mm package. Confirm land geometry, pin numbering, exposed-pad requirements, and soldering recommendations against the manufacturer package drawing before releasing the PCB footprint.
Where can I download the STM32F302CBT7 datasheet?
The official STM32F302CBT7 product and documentation resources are available through the STMicroelectronics STM32F302CB product page at https://www.st.com/en/microcontrollers-microprocessors/stm32f302cb.html. That page provides the product overview and access to the manufacturer documentation, including the datasheet, reference manual, errata, and package information. Use the ST document identifier and revision shown on the download page when controlling production documentation revisions.
Where can I find the STM32F302CBT7 pinout?
The STM32F302CBT7 pinout is found in the pin-description table and package drawing on the official STM32F302CB product page. The device uses a 48-pin LQFP package, and its pin assignments include power, ground, analog, debug, communications, and general-purpose I/O functions. Assign PCB nets directly from the manufacturer pin table rather than relying on a third-party pinout image, and confirm the active package ordering code before fabrication.
Is the STM32F302CBT7 suitable for motor control and fast sampling?
The STM32F302CBT7 is suitable for compact motor-control and fast-sampling designs because it combines a 72 MHz Cortex-M4 core with DSP instructions and a 12-bit ADC rated for 5 MSPS. These resources can support control-loop computation and rapid analog acquisition in a single device. The design must still account for motor-drive isolation, current sensing, power-stage timing, thermal conditions, and the MCU's analog and digital layout requirements.
Can the STM32F302CBT7 be used for industrial sensing and data acquisition?
The STM32F302CBT7 can be used for industrial sensing and data-acquisition modules because its 128 KB Flash, 72 MHz processing core, 12-bit 5 MSPS ADC, PGA, and comparators support compact mixed-signal designs. It is particularly useful when the measured signal requires fast conversion but the product does not need a high-pin-count MCU. Industrial suitability still depends on operating-temperature qualification, EMC validation, isolation requirements, and the specific sensing front end.
STM32F302CBT7 vs STM32F303CBT7 - which is better for mixed-signal control?
The STM32F302CBT7 and STM32F303CBT7 are closely related 48-LQFP Cortex-M4 devices, but the STM32F303CBT7 generally belongs to a broader STM32F3 feature family and should be selected when its additional peripheral resources are required. The STM32F302CBT7 is appropriate when its documented 72 MHz core, 128 KB Flash, 12-bit 5 MSPS ADC, PGA, comparators, DSP, FPU, MPU, and CCM resources satisfy the design. Compare the official pin and peripheral tables before exchanging them.
When should I choose the STM32F302CBT7 over another STM32F3 device?
Choose the STM32F302CBT7 when the design needs a 48-pin LQFP mixed-signal MCU with a 72 MHz Cortex-M4 core, 128 KB Flash, 12-bit 5 MSPS conversion, DSP, FPU, and a reasonably compact 7 x 7 mm footprint. Select a different family member when its flash, RAM, package pins, temperature grade, communications set, or safety features better match the product. The manufacturer ordering information and peripheral matrix should control the final choice.
Is the STM32F302CBT7 a drop-in replacement for an STM32F303CBT7?
The STM32F302CBT7 can be considered a footprint-compatible candidate for an STM32F303CBT7 because both use the 48-LQFP package, but a mechanical fit alone does not establish a drop-in replacement. Firmware, peripheral differences, interrupt behavior, analog characteristics, clock settings, and errata must be reviewed. Use the STM32F3 pin and peripheral documentation, then perform board-level and firmware regression testing before approving the substitution.
What can replace the STM32F302CBT7?
The closest documented replacement candidates are same-family STM32F3 devices with a matching 48-LQFP footprint and comparable core, Flash, and mixed-signal resources. Candidate part numbers include STM32F302CBT6, STM32F303CBT7, STM32F303CBT6, STM32F358CBT8, and STM32F358CBT6, subject to package, pin, temperature-grade, peripheral, and software compatibility checks. No cross-brand part is presented as a verified drop-in replacement because the cross-reference results do not establish pin and parameter equivalence.
What is the best STMicroelectronics equivalent for the STM32F302CBT7?
For a second source within STMicroelectronics, begin with STM32F303CBT7 because it uses the same 48-LQFP format and offers a closely related Cortex-M4 mixed-signal platform. STM32F302CBT6 provides the closest same-package ordering variant, while STM32F358CBT8 and STM32F358CBT6 belong to the higher-feature STM32F3 line. No alternative should be treated as production-ready without comparing the official pin table, memory configuration, temperature grade, errata, and firmware dependencies.
Where can I buy STM32F302CBT7 and check its price?
Use the Request a Quote form on this page to request STM32F302CBT7 pricing, stock confirmation, lead time, and order quantities. The manufacturer lists the STM32F302CB device as active, and the exact ordering code STM32F302CBT7 is represented by the 48-LQFP tray variant. Submit the required quantity and delivery destination with the request so the commercial team can return an accurate commercial response for the exact MPN and package.
Is the STM32F302CBT7 in stock and what is its lead time?
Stock and lead time for the exact STM32F302CBT7 should be confirmed through the Request a Quote form on this page. The manufacturer identifies the STM32F302CB family as active, but lifecycle status alone does not establish current warehouse quantity or a shipment date. Include your required quantity, packaging preference, destination, and production schedule so the response reflects the current channel position rather than a generic product-page statement.
What are the key specifications engineers should know about the STM32F302CBT7?
The key STM32F302CBT7 specifications are its 72 MHz maximum CPU frequency, 128 KB Flash, 32-bit Arm Cortex-M4 core with DSP and FPU, 12-bit 5 MSPS ADC, PGA, comparators, MPU, CCM resources, 2.5 V and 3.3 V operating options, and 48-LQFP 7 x 7 mm package. The manufacturer lists it as an active mainstream mixed-signal MCU. SRAM capacity, exact I/O count, and temperature limits should be checked in the current manufacturer documentation.

工程参考数据: STM32F302CBT7 ——对比、设计指导和合规信息。

选型指南

Choose the STM32F302CBT7 for compact mixed-signal products that need a 72 MHz Arm Cortex-M4 core, 128 KB Flash, 12-bit 5 MSPS conversion, DSP and FPU instructions, PGA, comparators, MPU, and CCM support in a 48-LQFP 7 x 7 mm package. Choose STM32F302CBT6 when the temperature-grade ordering code better matches the production requirement. Consider STM32F303CBT7 or STM32F303CBT6 when their additional STM32F3 peripheral resources are beneficial, but verify pin multiplexing and firmware changes. STM32F358CBT8 and STM32F358CBT6 are appropriate when the broader STM32F358 feature set is useful. For every substitution, compare the official pin table, memory map, peripherals, temperature range, errata, and boot behavior. No cross-brand substitute is recommended because the available cross-reference material does not verify a pin-to-pin 48-LQFP equivalent.

与替代料对比

参数 本产品 STM32F302CBT6 STM32F303CBT7 STM32F303CBT6 STM32F358CBT8 STM32F358CBT6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 48-LQFP (7 x 7 mm) 48-LQFP (7 x 7 mm) 48-LQFP (7 x 7 mm) 48-LQFP (7 x 7 mm) 48-LQFP (7 x 7 mm) 48-LQFP (7 x 7 mm)
Maximum CPU Frequency 72 MHz 72 MHz 72 MHz 72 MHz 72 MHz 72 MHz
Flash Memory 128 KB 128 KB 128 KB 128 KB 128 KB 128 KB
Processor Core Arm Cortex-M4 with DSP and FPU Arm Cortex-M4 with DSP and FPU Arm Cortex-M4 with DSP and FPU Arm Cortex-M4 with DSP and FPU Arm Cortex-M4 with DSP and FPU Arm Cortex-M4 with DSP and FPU
ADC Resolution 12-bit 12-bit 12-bit 12-bit 12-bit 12-bit
ADC Conversion Rate 5 MSPS 5 MSPS 5 MSPS 5 MSPS 5 MSPS 5 MSPS
Operating Voltage Options 2.5 V / 3.3 V 2.5 V / 3.3 V 2.5 V / 3.3 V 2.5 V / 3.3 V 2.5 V / 3.3 V 2.5 V / 3.3 V
Special Mixed-Signal Features PGA and comparators PGA and comparators PGA and comparators PGA and comparators PGA and comparators PGA and comparators
Memory Protection and CCM MPU and CCM supported MPU and CCM supported MPU and CCM supported MPU and CCM supported MPU and CCM supported MPU and CCM supported

关键差异点

  • Combines 72 MHz processing with fast mixed-signal conversion (对比 STM32F303CBT7)
  • Maintains the same compact 48-LQFP footprint (对比 STM32F358CBT8)
  • Offers a direct same-package ordering-family path (对比 STM32F302CBT6)

设计说明

Assign the PCB footprint directly from the STM32F302CB package drawing and pin-description table. The device uses a 48-LQFP 7 x 7 mm package, so land length, width, pitch, and solder-mask expansion must match the manufacturer drawing rather than a generic 48-pin LQFP footprint. Check pin-1 orientation against the PCB silkscreen and assembly drawing, and confirm the ordering code specifies the tray variant STM32F302CBT7.

Keep VDDA, VSSA, reference, and analog-input routing away from switching-node paths and high-current return currents. Place decoupling components close to their associated supply pins, use a low-impedance analog ground strategy, and avoid routing sensitive analog signals beneath digital clocks or communication interfaces. For the 12-bit 5 MSPS ADC, minimize source impedance and follow the acquisition, sampling, and reference recommendations in the manufacturer documentation.

Do not treat the 5 MSPS ADC specification as guaranteed full-resolution accuracy at every sampling rate. Source impedance, acquisition time, reference voltage, clock stability, and analog-network design affect conversion accuracy. Use the ADC characterization and application guidance in the datasheet, calibrate the analog front end where required, and include tests for overrange, saturation, and out-of-range input behavior.

Although the LQFP package provides a substantial exposed copper area for heat spreading, final thermal performance depends on the PCB copper, board size, airflow, and adjacent heat sources. Estimate worst-case junction temperature using the manufacturer thermal data and the actual board implementation rather than relying on package dimensions alone. Verify operation across the required ambient range and during maximum CPU and analog-conversion activity.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer product description confirms active lifecycle status and the main device characteristics but does not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations.

数据核验日期: 2026-11-15 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

STM32F302CBT7 datasheet STM32F302CBT7 pinout STM32F302CBT7 datasheet pdf STM32F302CBT7 equivalent STM32F302CBT7 replacement STM32F302CBT7 cross reference STM32F302CBT7 vs STM32F303CBT7 STM32F302CBT7 LQFP-48 footprint STM32F302CBT7 72MHz Cortex-M4 STM32F302CBT7 12-bit ADC STM32F302CBT7 price STM32F302CBT7 stock STMicroelectronics STM32F302CBT7 STM32F302CBT7 motor control STM32F302CBT7 industrial sensor controller

相关元器件 & 术语

STMicroelectronics STM32F302CBT7 STM32F302CB STM32F302CBT6 STM32F303CBT7 STM32F303CBT6 STM32F358CBT8 STM32F358CBT6 STM32F3 Arm Cortex-M4 ARM Cortex-M4 core microcontroller mixed-signal MCU embedded processor semiconductor 32-bit RISC DSP FPU MPU CCM RAM 12-bit ADC 5 MSPS PGA comparators 48-LQFP LQFP-48 surface mount industrial sensor controller motor control data acquisition power supply monitoring
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情