STM32F302CBT7 - 72MHz Cortex-M4 MCU | STMicroelectronics
부품 번호: STM32F302CBT7 ✓ 활성STM32F302CBT7 개요
A microcontroller such as the STM32F302CBT7 integrates a processor core, programmable memory, analog and digital peripherals, clock control, and communication interfaces into one semiconductor package. The STM32F3 family combines Cortex-M4 processing performance with fast analog conversion and timing resources. This places the device in the broader hierarchy of embedded processor, microcontroller, semiconductor, and electronic control component families. Its 128 KB Flash provides a practical balance between firmware capacity, board area, and cost for industrial, consumer, communications, and embedded-control products.
Key features include a maximum CPU frequency of 72 MHz, 128 KB of Flash, a 12-bit ADC with a 5 MSPS conversion rate, an Arm Cortex-M4 core with DSP and FPU capabilities, a memory protection unit, and dedicated comparators. The 48-LQFP package exposes enough I/O for mixed-signal products while supporting automated board assembly. Operation from 2.5 V and 3.3 V supply arrangements makes the MCU suitable for conventional embedded systems where system-level power requirements need to remain simple.
The Cortex-M4 architecture provides hardware integer arithmetic plus single-precision floating-point and DSP instructions, reducing the processing burden for motor control, signal conditioning, digital filtering, and control-loop workloads. The fast 12-bit ADC supports sampled measurements in industrial monitoring, power conversion, and sensor-interface systems. The ADC, comparators, and programmable-gain amplifier allow analog front-end functions to be consolidated around the MCU rather than implemented entirely through separate discrete components.
Typical applications include industrial sensor controllers, motor-control boards, power-supply monitoring, compact data-acquisition modules, communications equipment, and compact consumer products. Its 48-pin LQFP footprint is particularly useful when a design needs more I/O than a small 32-pin MCU provides but does not require the complexity or area of a 64-pin or 100-pin package. The combination of 72 MHz processing and 5 MSPS conversion can shorten control-loop latency in applications that sample rapidly changing analog signals.
PCB implementation should follow the manufacturer pinout and layout guidance, including correct VDDA and VSSA connection, appropriate decoupling, and controlled clock and analog routing. Avoid long traces between sensitive analog pins and their reference network, and maintain clean return paths beneath high-speed or switching nodes. Validate the final power, grounding, and decoupling arrangement against the device's reference schematic and electromagnetic-compatibility requirements.
This product page combines the manufacturer's core device description with package, sourcing, comparison, and design guidance. It also identifies practical replacement considerations for engineers evaluating the STM32F302CBT7 in new mixed-signal embedded-control designs.
드롭인 대체품: STM32F302CBT7 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32F302CBT7 (동일 폼 팩터 및 풋프린트) — 차이점: Flash Memory, Package, ADC Resolution, Analog Features, CPU Core.
STM32F302CBT6
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →STM32F303CBT7
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →STM32F303CBT6
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →STM32F358CBT8
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32F358CBT6
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32F302CBT7 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Maximum CPU Frequency | 72 MHz |
| Flash Memory | 128 KB (128K x 8) |
| CPU Core | ARM Cortex-M4 with DSP and FPU |
| Architecture | 32-bit RISC |
| Operating Voltage Options | 2.5 V / 3.3 V |
| ADC Resolution | 12-bit |
| ADC Conversion Rate | 5 MSPS |
| Analog Features | PGA and comparators |
| Memory Protection | MPU supported |
| Programmable Memory | CCM RAM |
| 패키지 | 48-LQFP (7 x 7 mm) |
| 핀 수 | 48 pins |
| 실장 유형 | Surface mount |
| Product Class | Mainstream mixed-signal MCU |
STM32F302CBT7 48-lqfp (7 x 7 mm) 핀 구성 가이드
STM32F302CBT7(48-lqfp (7 x 7 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32F302CBT7.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32F302CBT7 적합 용도: 6 애플리케이션s: Industrial Sensor Controller, Compact Motor Control, Power Supply Monitoring, Rapid Data Acquisition Module, Communications Equipment, Consumer Control Product.
Industrial Sensor Controller
The STM32F302CBT7 fits industrial sensor controllers that require fast analog acquisition without allocating a separate high-resolution converter. Its 12-bit ADC operates at up to 5 MSPS, allowing the controller to sample rapidly changing sensor signals while the 72 MHz Cortex-M4 core performs filtering, calibration, and control calculations. The DSP and FPU features also support arithmetic-heavy signal processing. In an industrial design, the MCU can evaluate comparators and supervise thresholds through integrated mixed-signal resources. Engineers should still isolate external analog circuitry from switching nodes, provide a clean reference network, and verify temperature and EMC requirements against the final product specification.
추천
Compact Motor Control
The STM32F302CBT7 is appropriate for compact motor-control subsystems where the controller must sample position, current, or voltage feedback and execute a control loop on the same board. Its 72 MHz Cortex-M4 core with DSP and FPU capabilities reduces the computational burden of filtering and current-loop algorithms, while the 5 MSPS ADC can acquire analog feedback at a useful rate. The 48-LQFP package provides a practical balance between I/O access and board size. For production use, validate PWM timing, encoder inputs, current-sense scaling, motor-startup behavior, and thermal performance across the complete power stage rather than relying only on the MCU specifications.
추천
Power Supply Monitoring
The STM32F302CBT7 can supervise a compact power-conversion or power-supply module by combining analog measurement, threshold comparison, and control processing in one microcontroller. The 12-bit 5 MSPS ADC is suitable for monitoring converter feedback and operating signals, while the PGA and comparators support conditioning and protection functions. Its 128 KB Flash provides room for supervisory logic, fault logging, and communication routines, and the Cortex-M4 FPU can assist with filtering calculations. The controller should maintain separate analog and digital return paths, use the manufacturer guidance for VDDA and VSSA connection, and include startup and fault-response tests for the complete power system.
추천
Rapid Data Acquisition Module
The STM32F302CBT7 supports compact data-acquisition modules that need to capture analog waveforms while performing real-time digital processing. The 5 MSPS 12-bit ADC establishes a high sampling rate, while the 72 MHz Cortex-M4 core can execute filtering, scaling, peak detection, and data-packet preparation. The 128 KB Flash supports firmware and calibration tables, and the 48-LQFP package leaves room for external interface components. A high-quality acquisition design should control source impedance, select suitable sampling and anti-alias networks, and account for ADC settling and reference accuracy. Firmware must also distinguish input bandwidth from the ADC's sampling rate and avoid assuming that every sampled point has full accuracy.
추천
Communications Equipment
The STM32F302CBT7 can serve as the embedded control processor in compact communications equipment where protocol handling, monitoring, and analog measurements are required on one board. Its Cortex-M4 core provides sufficient throughput for packet processing and control logic, while the 128 KB Flash provides space for protocol stacks and configuration. The available comparator and fast ADC resources can support signal monitoring or threshold functions around the communications channel. Package selection must be checked against the required serial interfaces and pin multiplexing, and the board should isolate communications traces from sensitive analog paths. Firmware timing, clock-tree configuration, and peripheral pin remapping should be validated with the complete system requirements.
추천
Consumer Control Product
The STM32F302CBT7 is suitable for compact consumer products that combine touch, analog sensing, and embedded control in a 48-pin surface-mount package. The integrated 12-bit ADC, PGA, and comparators can reduce the number of external signal-conditioning components, while the Cortex-M4 DSP and FPU capabilities support responsive product logic. At 72 MHz, the device can combine user-interface updates with control and communication tasks without requiring a separate processor. The LQFP 7 x 7 mm outline can simplify assembly compared with larger fine-pitch packages. Before production, verify the exact pin multiplexing, ADC noise performance, EMC emissions, and consumer-product environmental requirements, because the mixed-signal performance still depends on careful component selection and layout.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32F302CBT7 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32F302CBT6 | STM32F303CBT7 | STM32F303CBT6 | STM32F358CBT8 | STM32F358CBT6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) |
| Maximum CPU Frequency | 72 MHz | 72 MHz | 72 MHz | 72 MHz | 72 MHz | 72 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| Processor Core | Arm Cortex-M4 with DSP and FPU | Arm Cortex-M4 with DSP and FPU | Arm Cortex-M4 with DSP and FPU | Arm Cortex-M4 with DSP and FPU | Arm Cortex-M4 with DSP and FPU | Arm Cortex-M4 with DSP and FPU |
| ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
| ADC Conversion Rate | 5 MSPS | 5 MSPS | 5 MSPS | 5 MSPS | 5 MSPS | 5 MSPS |
| Operating Voltage Options | 2.5 V / 3.3 V | 2.5 V / 3.3 V | 2.5 V / 3.3 V | 2.5 V / 3.3 V | 2.5 V / 3.3 V | 2.5 V / 3.3 V |
| Special Mixed-Signal Features | PGA and comparators | PGA and comparators | PGA and comparators | PGA and comparators | PGA and comparators | PGA and comparators |
| Memory Protection and CCM | MPU and CCM supported | MPU and CCM supported | MPU and CCM supported | MPU and CCM supported | MPU and CCM supported | MPU and CCM supported |
주요 차별점
- Combines 72 MHz processing with fast mixed-signal conversion (vs STM32F303CBT7)
- Maintains the same compact 48-LQFP footprint (vs STM32F358CBT8)
- Offers a direct same-package ordering-family path (vs STM32F302CBT6)
설계 노트
Assign the PCB footprint directly from the STM32F302CB package drawing and pin-description table. The device uses a 48-LQFP 7 x 7 mm package, so land length, width, pitch, and solder-mask expansion must match the manufacturer drawing rather than a generic 48-pin LQFP footprint. Check pin-1 orientation against the PCB silkscreen and assembly drawing, and confirm the ordering code specifies the tray variant STM32F302CBT7.
Keep VDDA, VSSA, reference, and analog-input routing away from switching-node paths and high-current return currents. Place decoupling components close to their associated supply pins, use a low-impedance analog ground strategy, and avoid routing sensitive analog signals beneath digital clocks or communication interfaces. For the 12-bit 5 MSPS ADC, minimize source impedance and follow the acquisition, sampling, and reference recommendations in the manufacturer documentation.
Do not treat the 5 MSPS ADC specification as guaranteed full-resolution accuracy at every sampling rate. Source impedance, acquisition time, reference voltage, clock stability, and analog-network design affect conversion accuracy. Use the ADC characterization and application guidance in the datasheet, calibrate the analog front end where required, and include tests for overrange, saturation, and out-of-range input behavior.
Although the LQFP package provides a substantial exposed copper area for heat spreading, final thermal performance depends on the PCB copper, board size, airflow, and adjacent heat sources. Estimate worst-case junction temperature using the manufacturer thermal data and the actual board implementation rather than relying on package dimensions alone. Verify operation across the required ambient range and during maximum CPU and analog-conversion activity.
규정 준수 정보
The manufacturer product description confirms active lifecycle status and the main device characteristics but does not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations.