STMicroelectronics

STM32F303VBT6 - 72MHz Cortex-M4 MCU | STMicroelectronics

料号: STM32F303VBT6 ✓ 量产中
100-pin LQFP Package 72 MHz Speed 128 KB Memory
最小起订量: 1 |

STM32F303VBT6 概述

The STMicroelectronics STM32F303VBT6 is a 32-bit mixed-signal microcontroller based on the Arm Cortex-M4 core, operating at 72 MHz with 128 KB of Flash memory and DSP and floating-point unit support in a 100-pin LQFP 14 x 14 mm package. It combines a high-performance processor core with a 12-bit ADC capable of 5 MSPS, programmable gain amplification, comparators, MPU, and CCM resources.

A mixed-signal microcontroller is a semiconductor device that combines a digital processor and analog or mixed-signal functions in one package. The STM32F3 family belongs to the broader hierarchy of microcontroller, embedded processor, digital controller, and semiconductor product categories. This integration allows a compact embedded design to acquire and process analog measurements while executing control, communication, and monitoring software without requiring several separate devices.

The STM32F303VBT6 provides 128 KB of Flash and a 72 MHz CPU with DSP instructions and an FPU. Its 12-bit ADC operates at up to 5 MSPS and includes PGA and comparator resources, making it suitable for fast signal acquisition and control-loop work. The MPU supports controlled memory access for system protection, while the CCM provides fast on-chip memory for performance-sensitive code or data.

The 72 MHz Arm Cortex-M4 architecture combines deterministic interrupt-driven operation with single-precision floating-point acceleration and DSP instructions. These capabilities improve computational throughput for motor-control calculations, digital filtering, waveform analysis, and other mixed-signal workloads. The 100-pin LQFP package also provides a substantial pin count for external memory, communications, analog inputs, timers, and debug functions.

Typical applications include industrial motor controllers, digital power converters, sensor instrumentation, data acquisition systems, medical monitoring equipment, and compact industrial controls. The fast ADC supports applications that sample rapidly changing analog signals, while the Cortex-M4 FPU and DSP capabilities are valuable in filtering, control, and signal-processing algorithms.

When designing around this controller, assign analog and communications pins according to the manufacturer pin-description table, place decoupling capacitors close to the supply pins, and keep high-current or switching nodes away from sensitive analog inputs. Firmware and board bring-up should also verify clock, reset, bootloader, and debug behavior before production programming.

This page combines manufacturer specifications, sourcing guidance, application-oriented design guidance, and a package-level comparison framework. The technical details help engineers identify whether the STM32F303VBT6 matches the required memory capacity, processing speed, analog performance, package footprint, and embedded-control feature set.

直接替换替代料: STM32F303VBT6 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: STM32F303VBT6 (相同外形与封装尺寸) ——差异在于 ADC Resolution, Package, Product Type.

STMicroelectronics
ADC Resolution: 16-bit sigma-delta and 12-bit SAR
Package: 100-lead LQFP
Product Type: 32-bit ARM Cortex-M4 mixed-signal microcontroller
对比 STM32F303VBT6 →

该产品暂无直接替换替代料。

请求替代料

STM32F303VBT6 最大额定值与电气特性

Product Type 32-bit mixed-signal microcontroller
CPU Core Arm Cortex-M4
Maximum CPU Frequency 72 MHz
Flash Memory 128 KB
Flash Organization 128K x 8 bits
DSP Support Yes
Floating-Point Unit Yes
Memory Protection Unit Yes
Core Coupled Memory Yes
ADC Resolution 12 bits
Maximum ADC Sampling Rate 5 MSPS
Programmable Gain Amplifier Yes
Comparators Yes
封装 100-pin LQFP
Package Body Size 14 x 14 mm
安装类型 Surface mount

STM32F303VBT6 14 x 14 mm 引脚配置指南

STM32F303VBT6(14 x 14 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

STM32F303VBT6 的 14 x 14 mm 封装引脚图

暂无详细引脚数据: STM32F303VBT6.

请参阅 数据手册 以查看完整引脚配置。

典型应用

STM32F303VBT6 适用于 6 应用s: Industrial Motor Control, Digital Power Conversion, Data Acquisition Systems, Precision Sensor Instrumentation, Medical Monitoring Equipment, Communications and Gateway Equipment.

🏭

Industrial Motor Control

The STM32F303VBT6 fits industrial motor-control systems that require fast control-loop execution and analog feedback. Its 72 MHz Arm Cortex-M4 core provides DSP instructions and a single-precision FPU for current-loop and transformation calculations, while the 12-bit ADC supports sampling rates up to 5 MSPS. The PGA and comparators can assist with current-sense or protection conditioning. A 100-pin LQFP provides numerous timer and communications pins for encoders, position sensors, gate drivers, and supervisory signals. Designers should allocate pins from the manufacturer pin table, isolate switching traces from analog inputs, and validate control timing against the selected motor-control architecture.

⚡

Digital Power Conversion

The STM32F303VBT6 is appropriate for digital power converters where the controller must execute feedback algorithms while monitoring analog signals. The 72 MHz Cortex-M4 core supports fast PI-loop processing and DSP-accelerated calculations, and its FPU reduces the computational burden of floating-point control functions. The 5 MSPS 12-bit ADC can sample feedback signals, while the PGA and comparators support input conditioning and fast threshold detection. The 100-pin package offers ample connectivity for switching-control signals, current sensing, voltage references, communications, and fault handling. Layout should keep analog inputs away from high-dV/dt power stages and follow the manufacturer’s decoupling and grounding guidance.

🖥️

Data Acquisition Systems

The STM32F303VBT6 supports compact data-acquisition equipment that must digitize analog waveforms and perform local processing. Its 12-bit ADC supports sampling at up to 5 MSPS, enabling acquisition of higher-bandwidth signals than a slow low-resolution system while the Cortex-M4 core handles buffering, filtering, calibration, and data formatting. DSP instructions and the FPU are valuable for real-time transforms, measurement algorithms, and digital filtering. The 100-pin LQFP exposes interfaces for sensors, external memory, communication, and synchronization. Engineers should define the analog bandwidth, ADC settling requirements, reference strategy, and acquisition timing before component selection.

🧩

Precision Sensor Instrumentation

The STM32F303VBT6 suits industrial and laboratory instruments that combine sensor conditioning, measurement, and local control. Its PGA can support analog front-end gain selection, its comparators can implement threshold events, and the 5 MSPS ADC supports rapid measurement sequences. At 72 MHz, the Cortex-M4 FPU and DSP capabilities allow sensor data to be filtered and compensated without offloading every operation to an external processor. The 100-pin package provides flexible support for analog inputs, displays, communications, and digital sensors. The final design should evaluate noise, reference accuracy, analog settling, calibration, and the relationship between sampling rate and signal bandwidth.

💊

Medical Monitoring Equipment

The STM32F303VBT6 can support medical monitoring and diagnostic equipment that combine sensor acquisition with an embedded user interface or communications subsystem. The fast 12-bit ADC handles analog front-end outputs, while the 72 MHz Cortex-M4 core with FPU supports filtering, trend analysis, and control functions. The PGA and comparators are useful for conditioning and threshold detection in low-level sensor systems. Its 100-pin package allows integration of displays, isolated communications, status indicators, and safety inputs without immediately moving to a larger device. Medical designs still require application-specific risk analysis, electrical-safety review, validation of analog performance, and confirmation that every selected variant satisfies the intended quality requirements.

🌐

Communications and Gateway Equipment

The STM32F303VBT6 fits compact communications gateways that need local analog supervision alongside protocol processing and control. Its Cortex-M4 core provides a 72 MHz execution platform with DSP and floating-point support, while the 12-bit ADC, PGA, and comparators can monitor supply rails, analog sensors, or external thresholds. The 100-pin package offers a broad pin budget for serial links, status control, and user interfaces. Engineers can use it as a supervisory controller around higher-functioning network processors or as the central MCU in a smaller edge device. Design work should verify the required communications peripherals, protocol timing, memory budget, clock configuration, and firmware update strategy.

What are the key specifications of STM32F303VBT6 that engineers should know?
The STM32F303VBT6 is a 72 MHz Arm Cortex-M4 mixed-signal microcontroller with 128 KB of Flash, DSP instructions, an FPU, a 12-bit 5 MSPS ADC, PGA, comparators, MPU, and CCM support. It is packaged in a 100-pin 14 x 14 mm LQFP. STMicroelectronics lists the STM32F303VB family as Active Mainstream, making it appropriate for new mixed-signal embedded designs.
What is the operating frequency of the STM32F303VBT6?
The STM32F303VBT6 operates at a maximum CPU frequency of 72 MHz using its Arm Cortex-M4 core. This processing rate supports responsive interrupt handling, digital filtering, motor-control algorithms, and general embedded logic. According to the STMicroelectronics STM32F303VB product page, the device also provides DSP instructions and a floating-point unit for signal-processing workloads.
How much Flash memory does the STM32F303VBT6 contain?
The STM32F303VBT6 contains 128 KB of Flash memory organized as 128K x 8 bits. The manufacturer product page identifies 128 Kbytes of Flash for the STM32F303VB family, and the distributor listing describes the same 128K x 8 organization. Check the linked datasheet for boot, option-byte, and application-code space requirements before finalizing firmware capacity.
Where can I download the STM32F303VBT6 datasheet PDF?
The official STM32F303VB product page at st.com provides the manufacturer datasheet and related documentation for the STM32F303VBT6. The STM32F303 documentation page also organizes datasheets, reference manuals, application notes, and programming resources. Use the manufacturer links for the most authoritative revision and verify that the selected document covers the VB device and 100-pin package.
Where can I find the STM32F303VBT6 pinout?
The STM32F303VBT6 pinout is documented in the pin-description section of the manufacturer datasheet for the 100-pin LQFP package. Use that table when assigning power, ground, reset, clock, debug, analog, timer, and communications signals to PCB tracks. The 14 x 14 mm package drawing should be cross-checked against the selected schematic symbol and footprint.
Is the STM32F303VBT6 suitable for motor-control and digital power applications?
The STM32F303VBT6 is suitable for motor-control and digital power applications because its Cortex-M4 core operates at 72 MHz with DSP instructions and an FPU, while its 12-bit ADC samples at up to 5 MSPS. The PGA and comparators support signal conditioning and fast control decisions. Exact timer channels, current-sense interfaces, and protection functions must be confirmed in the datasheet.
STM32F303VBT6 vs STM32F303CBT6 — which is better for a new design?
The STM32F303VBT6 is the better match when a design requires the 100-pin LQFP footprint and 128 KB of Flash, while STM32F303CBT6 is associated with the smaller 48-pin package. Both use the STM32F3 mixed-signal MCU concept, but pin count, available peripherals, board area, and memory requirements differ. Package dimensions and pin availability must be checked before treating either device as interchangeable.
When should I choose the STM32F303VBT6 over another STM32F3 microcontroller?
Choose the STM32F303VBT6 when the design benefits from a 72 MHz Cortex-M4 core, 128 KB of Flash, the FPU and DSP capabilities, and 100 pins in a 14 x 14 mm LQFP package. It is especially attractive for mixed-signal industrial equipment requiring a fast ADC, PGA, comparators, and moderate logic connectivity. Select a different member when pin count, memory, or peripheral requirements differ.
What is the best drop-in replacement for STM32F303VBT6?
No verified drop-in replacement is established for the STM32F303VBT6 in the available cross-reference information. A valid replacement must match the 100-pin LQFP footprint, pin functions, electrical limits, memory requirements, clock architecture, and firmware expectations. STM32F303 family members can differ in Flash, SRAM, pins, and peripherals, so a package match alone is not sufficient.
Can another STM32F3 replace STM32F303VBT6 without PCB changes?
A candidate can replace the STM32F303VBT6 without PCB changes only after confirming exact package dimensions, pin assignments, supply requirements, peripheral mapping, and boot behavior. No cross-manufacturer pin-compatible replacement is confirmed here, and several STM32F3 variants use different package sizes or memory capacities. Treat any proposed substitution as a design-review item rather than an automatic drop-in.
What can replace the STM32F303VBT6?
The safest replacement path is to begin with another qualified STM32F303 member that offers the same 100-pin LQFP footprint and satisfies the original memory and peripheral requirements. The available data does not confirm a fully interchangeable part. Before replacing the device, compare the complete pin tables, electrical characteristics, clock tree, ADC characteristics, timers, and firmware initialization requirements.
Is STM32F303VBT6 the same as STM32F303VBT6TR?
STM32F303VBT6 and STM32F303VBT6TR refer to the same STM32F303VB device configuration, with the additional suffix identifying a tape-and-reel order form rather than a different core, memory size, or functional variant. Production BOMs should still follow the manufacturer ordering-information table to confirm package, temperature range, and delivery format for the intended assembly process.
Where can I buy STM32F303VBT6 online?
Use the Request a Quote form on this page to request STM32F303VBT6 availability, lead time, and a current quotation. The manufacturer product page also provides Order Direct and Sample and Buy options for the STM32F303VB family. Quote requests help confirm the exact package suffix, delivery format, quantity, and current lifecycle status before an order is placed.
What is the price of STM32F303VBT6?
The current unit price and quantity pricing for STM32F303VBT6 should be requested through the Request a Quote form on this page. Marketplace listings and distributor pages can change frequently and may use different package, quantity, or delivery assumptions. A quotation provides a current commercial basis for the exact MPN and intended order quantity.
What is the lead time and stock status for STM32F303VBT6?
Current stock and lead time for STM32F303VBT6 should be confirmed through the Request a Quote form on this page. STMicroelectronics identifies the STM32F303VB family as Active Mainstream, but that lifecycle statement does not by itself guarantee inventory for every package suffix or quantity. Request a quotation with the required quantity, date code, and delivery location.

工程参考数据: STM32F303VBT6 ——对比、设计指导和合规信息。

选型指南

Choose the STM32F303VBT6 for mixed-signal embedded designs that need a 72 MHz Cortex-M4 core, 128 KB of Flash, DSP and FPU support, and a fast 12-bit ADC with PGA and comparators. Its 100-pin LQFP package is useful when the board requires numerous analog, timer, communications, and control signals without moving to a very large package. It is a strong fit for motor control, digital power conversion, sensor instrumentation, data acquisition, and compact medical monitoring systems. Do not select it solely by family name when the application is constrained by SRAM, ADC accuracy, specific timer functions, communication peripherals, or low-power requirements. Any proposed alternative must match the footprint and electrical limits, and its firmware must be validated against the original design.

与替代料对比

参数 本产品
Package 100-pin LQFP, 14 x 14 mm
Brand STMicroelectronics
CPU Core Arm Cortex-M4
Maximum CPU Frequency 72 MHz
Flash Memory 128 KB
DSP Support Yes
Floating-Point Unit Yes
ADC Resolution and Maximum Rate 12 bits, 5 MSPS
Mixed-Signal Resources PGA and comparators
Lifecycle Status Active Mainstream

关键差异点

  • High-speed mixed-signal processing in one device (对比 A lower-pin STM32F3 device)
  • Substantial package connectivity (对比 STM32F303CBT6)
  • Digital signal-processing and floating-point support (对比 A Cortex-M0-class general-purpose MCU)

设计说明

Follow the manufacturer layout recommendations for supply pins, analog inputs, and exposed routing requirements. Place every supply decoupling capacitor directly beside its associated power pin, keep the analog ground and digital ground strategy consistent with the reference design, and route high-current outputs away from ADC and comparator inputs. The 14 x 14 mm LQFP footprint is relatively compact, so pad escape planning should begin before the schematic is frozen.

Treat the 12-bit ADC as a mixed-signal system rather than as a standalone converter. A 5 MSPS capability does not by itself guarantee useful bandwidth above the required signal range; analog front-end settling, source impedance, sampling-capacitor charging, reference noise, and channel multiplexing time must all be evaluated. Use the datasheet acquisition guidance and add filtering or a dedicated buffer when the sensor output cannot charge the ADC input network quickly enough.

Reserve all required power and ground pins according to the manufacturer pin table, and check the selected voltage ranges, total current demand, and regulator tolerance before releasing the layout. Do not infer power specifications from the CPU clock or package size. Validate startup sequencing, reset behavior, clock transitions, and brownout conditions in hardware, especially when external analog circuitry depends on a stable supply.

A 100-pin package match does not establish that another MCU is a drop-in replacement. Flash capacity, SRAM, timer channels, analog pin assignments, clock pins, bootloader behavior, and development-tool support can all affect a conversion. For an STM32F303VBT6 replacement, compare the complete datasheet pin and electrical tables and then recompile and retest firmware rather than relying on the family name alone.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer product page identifies the STM32F303VB family as Active Mainstream, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact STM32F303VBT6 order code.

数据核验日期: 2026-11-15 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

STM32F303VBT6 datasheet STM32F303VBT6 specifications STM32F303VBT6 pinout STM32F303VBT6 datasheet pdf STM32F303VBT6 footprint STM32F303VBT6 replacement STM32F303VBT6 equivalent STM32F303VBT6 price STM32F303VBT6 stock STMicroelectronics STM32F303VBT6 STM32F303VBT6 motor control STM32F303VBT6 ADC application

相关元器件 & 术语

STMicroelectronics STM32F303VBT6 STM32F303VB Arm Cortex-M4 mixed-signal microcontroller microcontroller embedded processor digital controller semiconductor DSP instructions floating-point unit FPU 12-bit ADC 5 MSPS programmable gain amplifier PGA comparators memory protection unit MPU core coupled memory CCM 128 KB Flash 72 MHz 100-pin LQFP LQFP-100
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情