STM32F777NIH6 - 216MHz Cortex-M7 MCU, 2MB Flash | STMicroelectronics
料号: STM32F777NIH6 ✓ 量产中STM32F777NIH6 概述
A microcontroller is a programmable semiconductor device that integrates a CPU core, memory, communication interfaces, timers, analog peripherals, and GPIO into one compact component. The STM32F7 family belongs to the hierarchy of Arm Cortex-M microcontrollers, embedded processors, and general-purpose semiconductor control devices. Its Cortex-M7 architecture supports deterministic embedded workloads while providing the memory capacity needed for graphics, networking, storage control, and signal-processing firmware.
Key characteristics include operation at up to 216 MHz, 2 MB of Flash program memory, a 32-bit Arm Cortex-M7 processor, and a 216-ball TFBGA package. The high operating frequency provides additional compute headroom for complex control loops, communications protocol processing, and DSP-oriented algorithms. The package also offers a large pin and ball count for systems requiring extensive external connectivity. Additional memory, I/O voltage, Ethernet, USB, and timer details should be confirmed in the manufacturer documentation before final design release.
The STM32F777NIH6 is associated with the STM32F777xx product family, whose high-performance Cortex-M7 core is intended for demanding embedded applications. Its performance position makes it suitable for industrial control systems, communication equipment, audio processing, data acquisition, and connected products. Designing the firmware with the STM32 development ecosystem can also simplify clock configuration, peripheral initialization, and board bring-up.
Typical applications include industrial gateways, motor-control systems, high-speed communications equipment, audio interfaces, instrumentation, and embedded human-machine interfaces. In each case, the device can consolidate control and connectivity functions while reducing the number of discrete components. A 216 MHz Cortex-M7 core is especially useful when firmware must perform filtering, protocol conversion, data formatting, or supervisory control concurrently with real-time peripheral servicing.
The primary design consideration is the 216-ball BGA assembly. Although the compact 13 mm by 13 mm package saves board area, it requires careful escape routing, thermal design, inspection, and manufacturing control. Confirm the exact pin, ball, power, ground, and exposed-pad assignments in the manufacturer pinout before routing the PCB. Crystal, decoupling, boot, reset, and programming-interface requirements must also follow the device reference configuration.
This product page combines the verified manufacturer identity, package and memory attributes with practical design guidance, application fit, and strict same-footprint replacement analysis. It also distinguishes verified drop-in candidates from related devices that require a different package or qualification review, helping engineers make PCB-impacting decisions with greater clarity.
直接替换替代料: STM32F777NIH6 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: STM32F777NIH6 (相同外形与封装尺寸) ——差异在于 Package.
STM32F779NIH6
✅ 直接替换联系询价
查看数据手册 →STM32F777NIH6 最大额定值与电气特性
| Product Type | High-performance 32-bit ARM Cortex-M7 microcontroller |
| Manufacturer | STMicroelectronics |
| Maximum CPU Frequency | 216 MHz |
| Processor Core | Arm Cortex-M7, 32-bit RISC |
| Flash Memory | 2 MB (2M x 8) |
| 封装 | 216-TFBGA (13 mm x 13 mm) |
| Ball Count | 216 balls |
| 安装类型 | Surface mount |
| Architecture | ARM 32-bit |
| Program Memory Type | Flash |
| Operating Temperature Grade | Industrial |
| 数据总线宽度 | 32-bit |
| Dual-Mode Quad-SPI | Supported |
STM32F777NIH6 216-tfbga (13 mm x 13 mm) 引脚配置指南
STM32F777NIH6(216-tfbga (13 mm x 13 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: STM32F777NIH6.
请参阅 数据手册 以查看完整引脚配置。
典型应用
STM32F777NIH6 适用于 6 应用s: Industrial Communications Gateway, High-Speed Industrial Motor Control, Embedded Audio Processing, Data Acquisition and Instrumentation, Connected Equipment Controller, Human-Machine Interface Controller.
Industrial Communications Gateway
The STM32F777NIH6 fits industrial gateway designs that must combine protocol conversion, local control, and data handling in one device. Its 216 MHz Arm Cortex-M7 core provides substantial headroom for handling communication stacks, filtering messages, and coordinating local I/O without splitting the workload across multiple processors. The 2 MB of Flash supports a larger embedded application than a basic microcontroller while retaining a compact 216-TFBGA footprint. A practical design would use the high-speed serial interfaces and DMA resources for network or storage traffic, then reserve the remaining pins for field-bus connections, status indicators, and service programming. Validate protocol timing, voltage domains, and pin multiplexing against the final board-level requirements before schematic release.
推荐
High-Speed Industrial Motor Control
The STM32F777NIH6 is suited to motor-control platforms where fast computation is needed for current sampling, control-law execution, and system supervision. Its Cortex-M7 core operates at up to 216 MHz, providing useful scheduling headroom for combining control algorithms with communications and safety monitoring. The 2 MB of Flash can hold a complex control application, parameter tables, and field-update logic. In a practical implementation, dedicated timers and DMA channels should handle periodic sampling and transfers so that timing-critical loops are not burdened by unrelated firmware tasks. Board designers must confirm the exact timer instances, analog inputs, motor-driver interface, and voltage requirements in the manufacturer documentation. Thermal planning should also include the power dissipation of the surrounding drive stage and the heat generated by the assembled BGA device.
推荐
Embedded Audio Processing
STM32F777NIH6 can serve as the processing engine in embedded audio products that combine signal processing, control, and communications. The 216 MHz Cortex-M7 architecture is better matched to filters, mixing, decoding, and dynamic-control workloads than a basic control microcontroller, while 2 MB of Flash provides room for substantial firmware. An audio design can use serial audio peripherals and DMA to move samples while the CPU performs decoding or real-time filtering, with GPIO handling control buttons and status indicators. The engineer should verify the required audio interface, supported sample rates, clocking arrangement, and external codec electrical requirements. Firmware architecture must prevent streaming or communication activity from disrupting audio timing, so task priorities and DMA placement should be tested under worst-case system load.
推荐
Data Acquisition and Instrumentation
The STM32F777NIH6 is appropriate for measurement instruments that must collect samples, execute control algorithms, and present or transmit results. Its 216 MHz Cortex-M7 core supports concurrent filtering, calibration, communications, and supervisory functions, while 2 MB of Flash accommodates application code and parameter tables. In a typical design, DMA can transfer sampled data from peripherals into memory without excessive CPU overhead, leaving processing cycles available for conversion and filtering. The design should define analog signal conditioning, reference accuracy, input bandwidth, and isolation outside the MCU, then align those requirements with the device's analog and digital specifications. Use the manufacturer pin description to route the required analog inputs and communication pins correctly, and validate clock jitter, acquisition timing, and buffer behavior across the complete operating-temperature range.
推荐
Connected Equipment Controller
STM32F777NIH6 fits connected industrial and commercial equipment that combines a real-time control function with network communication and secure device management. The Cortex-M7 core can execute control algorithms while managing protocol processing, local storage access, and user-interface updates. Its 2 MB of Flash provides adequate space for a layered firmware image, diagnostics, and configuration data, although RAM requirements should be checked separately before final memory budgeting. A practical implementation can use DMA and serial peripherals for efficient data movement, while boot and service pins support programming and recovery. Firmware partitioning should isolate safety-critical control functions from network services, and the security configuration should follow the manufacturer's current guidance. PCB planning must also account for BGA escape routing, clock-supply cleanliness, and interface protection at externally accessible connectors.
推荐
Human-Machine Interface Controller
The STM32F777NIH6 can act as the central controller in an embedded human-machine interface, combining display updates, input handling, communications, and equipment control. A 216 MHz Cortex-M7 core provides enough performance to refresh a graphical interface while maintaining real-time control tasks, and 2 MB of Flash supports graphics resources, localization data, and application logic. External displays can be connected through the appropriate serial or parallel interfaces once their timing and pin requirements are confirmed against the device documentation. DMA can reduce display and touch-controller transfer overhead, allowing the main loop to prioritize machine-control functions. The system designer should budget external memory if interface framebuffers exceed internal RAM, define display timing margins, and isolate noisy motor or relay drive circuits from sensitive display and communication lines. Prototype testing should cover update latency and simultaneous control-operation behavior.
推荐
推荐产品汇总
工程参考数据: STM32F777NIH6 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | STM32F779NIH6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 216-TFBGA (13 x 13 mm) | 216-TFBGA (13 x 13 mm) |
| Processor Core | Arm Cortex-M7, 32-bit RISC | Arm Cortex-M7, 32-bit RISC |
| Maximum CPU Frequency | 216 MHz | 216 MHz |
关键差异点
- High-performance Cortex-M7 processing in a compact 216-ball package (对比 STM32F779NIH6)
- Large 2 MB embedded program-memory capacity (对比 STM32F779NIH6)
- Single-package integration for high-pin-count embedded systems (对比 STM32F779NIH6)
设计说明
Route the 216-TFBGA as a fine-pitch BGA rather than adapting an older LQFP layout. Use the manufacturer package drawing for ball coordinates, pad geometry, and power or ground ball assignments. Short escape routes should be used for clocks, high-speed serial signals, and decoupling connections. Confirm the board stack-up, impedance targets, via-in-pad policy, and assembly process before releasing the PCB because these choices affect both signal integrity and manufacturing yield.
Plan a complete power tree around the device's documented supply rails and pin groups. Place bulk and local decoupling capacitance at the appropriate supply balls, maintain short return paths, and keep switching-node copper away from sensitive clock and communication inputs. The 216 MHz Cortex-M7 core can create meaningful switching activity, so power-distribution design should be evaluated with realistic processor and peripheral loading rather than a static current estimate alone.
Estimate the assembled board temperature using the MCU dissipation, the thermal resistance of the selected BGA PCB stack-up, and the enclosure's heat-transfer conditions. Where the manufacturer provides thermal guidance, follow the recommended exposed-pad and copper arrangement. Avoid using the 13 mm package dimension as proof of adequate cooling; thermal performance depends on the full board, neighboring heat sources, airflow, and the selected package construction.
Do not treat a related STM32F7 order code as automatically interchangeable. Before substituting a candidate, compare the complete ball map, power pins, debug interface, clocks, analog functions, communications peripherals, memory configuration, and package drawing. Firmware configuration may also require different clock trees or peripheral instances. A footprint match is necessary but does not by itself prove electrical, timing, or software compatibility.
合规信息
The verified product information identifies the part as an industrial-grade microcontroller but does not state the requested environmental or material-compliance statuses.