STMicroelectronics

STM32H747BIT6 - 480MHz Dual-Core MCU | STMicroelectronics

料号: STM32H747BIT6 ✓ 量产中
208-LQFP (28 mm x 28 mm) Package 480 MHz Speed 2 MB Memory
最小起订量: 1 |

STM32H747BIT6 概述

STMicroelectronics STM32H747BIT6 is a 32-bit dual-core Arm Cortex-M7 and Cortex-M4 microcontroller with core clocks of 480 MHz and 240 MHz, respectively. It integrates 2 MB of flash memory and is available in a 208-pin LQFP package measuring 28 mm by 28 mm. The device combines high-performance Cortex-M7 processing with a Cortex-M4 core for parallel control, communications, and real-time workloads.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication interfaces, timers, and other peripherals on one integrated circuit. The STM32H7 family occupies the high-performance segment of the microcontroller hierarchy, combining real-time embedded control with the processing throughput needed for graphics, industrial communications, audio processing, and connected equipment. The STM32H747BIT6 specifically combines a Cortex-M7 core with a Cortex-M4 core in one package.

Three defining characteristics are its 480 MHz Cortex-M7 core, 240 MHz Cortex-M4 core, and 2 MB of flash memory. The higher-frequency Cortex-M7 side can execute compute-intensive tasks, while the Cortex-M4 core can manage independent real-time tasks. Its 208-LQFP package provides a large number of external connections for demanding mixed-signal, communication, storage, and human-machine-interface designs.

The STM32H747 architecture is suited to systems that benefit from heterogeneous processing. Developers can divide appropriate workloads between the two Arm cores rather than forcing every task onto a single execution engine. The 2 MB embedded flash supports substantial firmware, while the dual-core arrangement allows real-time control tasks to coexist with more demanding application processing. Exact cache, RAM, voltage, peripheral, and timing parameters should be selected from the manufacturer ordering information and datasheet.

Typical applications include industrial automation controllers, high-resolution human-machine interfaces, industrial networking equipment, audio and digital signal processing systems, motor-control platforms, and test-and-measurement instruments. The dual-core organization is particularly useful when a communications or control task must remain responsive while another task performs heavier computation.

PCB implementation requires careful review of the 208-pin LQFP footprint, power supply architecture, decoupling strategy, high-speed signal integrity, and programming interface. Because the package exposes a large number of pins, designers should preserve the manufacturer reference layout and verify that every assigned signal has adequate routing space. Firmware should also validate clock, cache, power-domain, and peripheral assignments before production deployment.

This page consolidates the manufacturer product identity, distributor listings, family-level alternatives, and practical design guidance for engineers evaluating the STM32H747BIT6. It also distinguishes exact-orderable variants from broader STM32H7 devices and highlights the checks required before treating a substitute as a true drop-in replacement.

直接替换替代料: STM32H747BIT6 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: STM32H747BIT6 (相同外形与封装尺寸) ——差异在于 Package, Product Type, Flash Memory.

STMicroelectronics
Package: 208-LQFP, 28x28 mm
Flash Memory: 2 MB dual-bank
对比 STM32H747BIT6 →
STMicroelectronics
Package: 208-LQFP, 28 x 28 mm
Product Type: 32-bit dual-core Arm Cortex-M7/M4 microcontroller
Flash Memory: 2 MB
对比 STM32H747BIT6 →
STMicroelectronics
Package: LQFP-208 (28 x 28 mm), also listed as PQFP-208
Product Type: 32-bit ARM Microcontroller (MCU)
对比 STM32H747BIT6 →

STM32H743BIT6

✅ 直接替换 ⚠️ 规格未核验
STMicroelectronics
📦 208-LQFP (28x28)
Arm Cortex-M7 with FPU (DP-FPU) · 480 MHz · 2 MB dual-bank · 1 MB total (192 KB DTCM + 64 KB ITCM + 1 MB AXI-SRAM) · 1284 (typical) · 1.62 V to 3.6 V · -40 C to +105 C (industrial) · 208-LQFP, 28x28 mm

✓ 有现货

$9.85 / 个

查看数据手册 →

STM32H753BIT6

✅ 直接替换 ⚠️ 规格未核验
STMicroelectronics
📦 208-LQFP (28x28)
STMicroelectronics · 32-bit ARM Microcontroller (MCU) · Arm Cortex-M7 with FPU and DSP instructions · 480 MHz · 32-bit RISC · 2 MB (2M x 8) · 1 MB · LQFP-208 (28 x 28 mm), also listed as PQFP-208

联系询价

查看数据手册 →

STM32H742BIT6

✅ 直接替换 ⚠️ 规格未核验
📦 208-LQFP (28x28)
Cortex-M7-only architecture omits the 240 MHz Cortex-M4 core and has a different cache configuration; package remains 208-LQFP

📋 参考替代料(不在目录中)

STM32H750BIT6

✅ 直接替换 ⚠️ 规格未核验
📦 208-LQFP (28x28)
Cortex-M7-only architecture omits the 240 MHz Cortex-M4 core and uses a different peripheral feature mix; package remains 208-LQFP

📋 参考替代料(不在目录中)

STM32H747BIT6TR

✅ 直接替换
📦 208-LQFP (28x28)
Identical electrical and package configuration with a tape-and-reel shipping option instead of the original delivery format

📋 参考替代料(不在目录中)

STM32H747BIT6 最大额定值与电气特性

Product Type 32-bit dual-core microcontroller
High-Performance Core Arm Cortex-M7
Secondary Core Arm Cortex-M4
Cortex-M7 Maximum Frequency 480 MHz
Cortex-M4 Maximum Frequency 240 MHz
Architecture 32-bit RISC
Embedded Flash Memory 2 MB
Flash Organization 2M x 8 bits
封装 208-LQFP (28 mm x 28 mm)
安装类型 Surface mount

STM32H747BIT6 208-lqfp (28 mm x 28 mm) 引脚配置指南

STM32H747BIT6(208-lqfp (28 mm x 28 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

STM32H747BIT6 的 208-lqfp (28 mm x 28 mm) 封装引脚图

暂无详细引脚数据: STM32H747BIT6.

请参阅 数据手册 以查看完整引脚配置。

典型应用

STM32H747BIT6 适用于 6 应用s: Industrial Automation Controller, Industrial Networking Gateway, High-Resolution Human-Machine Interface, Audio Processing System, Motor and Motion Control, Test and Measurement Equipment.

🏭

Industrial Automation Controller

STM32H747BIT6 fits industrial automation controllers that must coordinate motion, fieldbus communication, diagnostics, and a higher-level control application. The 480 MHz Cortex-M7 core can process control algorithms or communication stacks, while the 240 MHz Cortex-M4 core can handle a separate real-time task such as a timer-based control loop. With 2 MB of embedded flash, the device also supports substantial configuration and application firmware. The implementation should use a deterministic task-partitioning plan and validate interrupt latency and shared-resource arbitration before deployment. Use the manufacturer clock, power, and package guidance to establish the industrial operating configuration.

🌐

Industrial Networking Gateway

STM32H747BIT6 is suitable for an industrial networking gateway combining protocol processing with real-time system management. The 480 MHz Cortex-M7 core can service demanding packet handling or gateway logic, while the 240 MHz Cortex-M4 core can monitor health indicators, manage timing tasks, or execute control functions. Its 2 MB of flash provides room for protocol stacks, configuration data, and diagnostics. A practical design should isolate latency-sensitive work from noncritical background activity, protect shared memory consistently, and reserve the required pins for the selected Ethernet and serial interfaces. Exact peripheral availability and electrical limits should be confirmed in the STM32H747 device documentation.

📺

High-Resolution Human-Machine Interface

STM32H747BIT6 supports high-resolution human-machine interface controllers that combine graphics-oriented processing with responsive touch and control handling. The Cortex-M7 core operating at 480 MHz can execute display, graphics, and user-interface logic, while the Cortex-M4 core at 240 MHz can maintain separate input, touch, or system-control tasks. The 2 MB of flash accommodates substantial firmware assets and interface configuration. Designers should evaluate memory bandwidth, display-interface timing, and peripheral sharing according to the selected panel and controller. A dual-core design is most useful when interface refresh work and deterministic control tasks would otherwise compete for a single core.

🎧

Audio Processing System

STM32H747BIT6 can serve as the control center of an audio processing system requiring real-time signal handling alongside higher-level application control. The 480 MHz Cortex-M7 core can perform demanding digital signal processing, while the 240 MHz Cortex-M4 core can manage transport, interface, or auxiliary real-time tasks. The two-core architecture helps separate low-latency operations from graphical, networking, or storage workloads that may have less deterministic timing. The 208-LQFP package exposes a broad pin count for audio converters, control interfaces, and supporting logic. Clocking, converter timing, memory access, and peripheral ownership must be planned together to prevent contention in the final audio pipeline.

🏭

Motor and Motion Control

STM32H747BIT6 fits advanced motor and motion-control platforms that combine fast control-loop execution with sophisticated supervisory functions. The 240 MHz Cortex-M4 core can handle deterministic timer-based control work, while the 480 MHz Cortex-M7 core can process trajectory logic, communications, diagnostics, and supervisory algorithms. The 2 MB of flash supports control software, parameter storage, and communication stacks. Partition critical interrupts and direct-memory-access paths carefully, and verify PWM, encoder, and analog-interface resources against the exact STM32H747 configuration. This division of labor can improve responsiveness without forcing the higher-performance core to handle every routine task.

🔧

Test and Measurement Equipment

STM32H747BIT6 is applicable to test and measurement instruments that need high-speed computation, real-time sampling control, and flexible user communication. The Cortex-M7 core at 480 MHz can process acquisition data and execute instrument-control algorithms, while the Cortex-M4 core at 240 MHz can manage timing, status, or auxiliary control functions. The 2 MB of flash provides capacity for firmware, calibration logic, and communication services. For sensitive measurement systems, prioritize clean power partitioning, controlled clocking, and short analog-signal routes. The selected data converters, interface standards, and measurement timing must be confirmed from the device documentation rather than inferred from the processor frequency alone.

What is STM32H747BIT6?
STM32H747BIT6 is an STMicroelectronics 32-bit dual-core microcontroller combining an Arm Cortex-M7 core operating up to 480 MHz with an Arm Cortex-M4 core operating up to 240 MHz. The device includes 2 MB of flash memory and uses a 208-LQFP package measuring 28 mm by 28 mm. According to the STMicroelectronics STM32H747BI product page, the STM32H747xI/G devices are based on the high-performance Cortex-M7 and Cortex-M4 32-bit RISC cores.
What are the key specifications of STM32H747BIT6 that engineers should know?
The STM32H747BIT6 combines two Arm cores, 2 MB of flash, and a 208-LQFP package in one device. Its Cortex-M7 core reaches 480 MHz, while its Cortex-M4 core reaches 240 MHz. The distributor listing identifies the device as a 32-bit dual-core Cortex-M4/M7 microcontroller with 2M x 8-bit flash. STMicroelectronics describes the H747xI/G family as high-performance Cortex-M7 and Cortex-M4 devices, making the core split the defining architectural feature.
How does the Cortex-M7 and Cortex-M4 combination benefit STM32H747BIT6 designs?
The STM32H747BIT6 can divide work between a 480 MHz Cortex-M7 core and a 240 MHz Cortex-M4 core. This arrangement can place compute-intensive work on one core while the other handles responsive control or communications. STMicroelectronics identifies the Cortex-M7 and Cortex-M4 combination as the basis of the STM32H747xI/G family. Firmware partitioning still requires consideration of shared memory, peripherals, interrupt ownership, and synchronization.
What package does STM32H747BIT6 use?
STM32H747BIT6 uses a 208-LQFP surface-mount package measuring 28 mm by 28 mm. The package size and 208-pin count are stated in the DigiKey product listing. Because the package is not among the available standard package-diagram keys used on this page, use the complete STM32H747 series pin table and land-pattern drawing in the STMicroelectronics datasheet when assigning signals and designing the PCB.
Where can I download the STM32H747BIT6 datasheet PDF?
The official technical entry point for STM32H747BIT6 is the STMicroelectronics STM32H747BI product page, which links to the family documentation and downloadable datasheet. The manufacturer page identifies the device family and its Cortex-M7 and Cortex-M4 architecture. Use the STMicroelectronics documentation for the authoritative pin descriptions, electrical characteristics, clock configuration, memory map, and package drawings associated with the exact orderable code.
Where can I find the STM32H747BIT6 pinout?
The STM32H747BIT6 pinout is found in the pin-description tables and package drawings published for the STM32H747 family on the STMicroelectronics product page. The device uses a 208-LQFP package with a 28 mm by 28 mm body. Assign PCB nets from the manufacturer pin table rather than inferring positions from another STM32H7 package, because exposed-lead counts and multifunction assignments vary across the family.
Is STM32H747BIT6 suitable for industrial control systems?
STM32H747BIT6 is suitable for industrial control systems that need both high-throughput processing and deterministic parallel control. Its Cortex-M7 core reaches 480 MHz for communications, data handling, and complex control software, while the Cortex-M4 core reaches 240 MHz for suitable real-time tasks. The 2 MB of embedded flash supports a larger application than many single-core controllers. Confirm the exact temperature grade, voltage limits, and interface requirements against the orderable-device documentation.
Can STM32H747BIT6 be used for audio and digital signal processing?
STM32H747BIT6 can support audio and digital signal processing because the Cortex-M7 core operates at up to 480 MHz while the Cortex-M4 core can perform a parallel real-time function. The two-core architecture can separate signal processing from communications, control, or data-transfer work. Actual signal-chain performance depends on the selected peripherals, memory configuration, clock tree, converter interface, and firmware architecture. Use the manufacturer peripheral and electrical tables to confirm each interface requirement.
STM32H747BIT6 vs STM32H743BIT6 - which is better for dual-core applications?
STM32H747BIT6 is the better choice when a design requires both Cortex-M7 and Cortex-M4 cores. STM32H743BIT6 is identified as a Cortex-M7 device, while STM32H747BIT6 combines Cortex-M7 at 480 MHz with Cortex-M4 at 240 MHz in one package. A single-core Cortex-M7 design may provide simpler software partitioning when the additional Cortex-M4 workload is unnecessary, but it does not provide the same heterogeneous two-core architecture.
STM32H747BIT6 vs STM32H753BIT6 - what is the difference?
STM32H753BIT6 is the Cortex-M7-only counterpart to the dual-core STM32H747BIT6 in the same 208-LQFP family configuration. STM32H747BIT6 adds a Cortex-M4 core operating up to 240 MHz alongside its 480 MHz Cortex-M7 core. Choose STM32H747BIT6 when software can benefit from parallel core execution; choose STM32H753BIT6 when the extra Cortex-M4 workload and software coordination are unnecessary. Verify the complete pin and peripheral differences before substitution.
When should I choose STM32H747BIT6 over STM32H743BIT6?
Choose STM32H747BIT6 when workload partitioning across a 480 MHz Cortex-M7 core and a 240 MHz Cortex-M4 core provides a measurable benefit. The additional core can support independent control, communications, or real-time service work while the Cortex-M7 handles heavier work. Choose STM32H743BIT6 when a single Cortex-M7 architecture is sufficient and simpler firmware partitioning, resource allocation, and validation are priorities. The memory, package, and clock configuration must also satisfy the system requirements.
What is the best drop-in replacement for STM32H747BIT6?
STM32H743BIT6 is the closest same-package same-family alternative when the replacement can be Cortex-M7-only, while STM32H753BIT6 is the closest option when only the Cortex-M7 core is required. Neither option reproduces the dual-core Cortex-M7 plus Cortex-M4 architecture of STM32H747BIT6. Because peripheral availability, pin multiplexing, firmware support, and electrical characteristics must match, request the manufacturer comparison before approving a production substitution.
Can STM32H743BIT6 replace STM32H747BIT6 without changing the PCB?
STM32H743BIT6 uses the same 208-LQFP family configuration and can serve as a board-level replacement candidate when the removed Cortex-M4 core is not required. The device still requires firmware, clock, interrupt, and peripheral reassignment because STM32H747BIT6 provides an additional Cortex-M4 core operating up to 240 MHz. Use the STM32H7 pin-compatible MCU list and exact-device datasheets to confirm every pin, power domain, and peripheral before production use.
Where can I buy STM32H747BIT6 online?
Use the Request a Quote form on this page to ask for STM32H747BIT6 pricing, stock confirmation, minimum order quantity, and current lead time. The part is identified by STMicroelectronics in the official product listing and in distributor records as a 208-LQFP dual-core Cortex-M7 and Cortex-M4 microcontroller with 2 MB of flash. A written quote allows procurement to confirm the exact suffix, package, quantity, delivery schedule, and traceability requirements.
What is the lead time and stock status for STM32H747BIT6?
Request the current STM32H747BIT6 stock position and lead time through the Request a Quote form on this page. A distributor listing states that the component can ship, but listing availability can change independently of factory lead time and does not guarantee a quantity allocation. Procurement should include the required quantity, target delivery date, acceptable packaging, and inspection requirements in the quote request.

工程参考数据: STM32H747BIT6 ——对比、设计指导和合规信息。

选型指南

Choose STM32H747BIT6 when the system benefits from parallel work across a 480 MHz Cortex-M7 core and a 240 MHz Cortex-M4 core, particularly for industrial control, networking, audio, or motion-control workloads with distinct real-time and high-throughput tasks. Choose STM32H743BIT6 when the board can operate with a single Cortex-M7 core and simpler firmware partitioning is more valuable than parallel execution. STM32H753BIT6 is appropriate when the Cortex-M7-only architecture satisfies all processing requirements. Consider STM32H742BIT6 only after confirming that its cache and peripheral configuration meet the application. STM32H747BIT6TR is the closest functional selection when the same dual-core device is required in a tape-and-reel delivery format. In every case, verify exact pin multiplexing, clock limits, power behavior, peripheral availability, boot requirements, and firmware support before releasing a substitution for production.

与替代料对比

参数 本产品 STM32H743BIT6 STM32H753BIT6 STM32H742BIT6 STM32H750BIT6 STM32H747BIT6TR
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 208-LQFP (28 mm x 28 mm) 208-LQFP (28 mm x 28 mm) 208-LQFP (28 mm x 28 mm) 208-LQFP (28 mm x 28 mm) 208-LQFP (28 mm x 28 mm) 208-LQFP (28 mm x 28 mm)
Processor Cores Arm Cortex-M7 and Arm Cortex-M4 Arm Cortex-M7 Arm Cortex-M7 Arm Cortex-M7 Arm Cortex-M7 Arm Cortex-M7 and Arm Cortex-M4
Maximum Cortex-M4 Frequency 240 MHz No Cortex-M4 core No Cortex-M4 core No Cortex-M4 core No Cortex-M4 core 240 MHz
Instruction Set 32-bit Arm RISC 32-bit Arm RISC 32-bit Arm RISC 32-bit Arm RISC 32-bit Arm RISC 32-bit Arm RISC
Dual-Core Parallel Processing Available with Cortex-M7 and Cortex-M4 Not available Not available Not available Not available Available with Cortex-M7 and Cortex-M4
Product Family STM32H7 STM32H7 STM32H7 STM32H7 STM32H7 STM32H7

关键差异点

  • Adds parallel Cortex-M4 processing to the Cortex-M7 platform (对比 STM32H743BIT6)
  • Retains dual-core capability in the tape-and-reel orderable option (对比 STM32H753BIT6)
  • Provides a defined Cortex-M7 and Cortex-M4 pairing for heterogeneous workloads (对比 STM32H742BIT6)

设计说明

Use the manufacturer land pattern and pin-description table for the 208-LQFP package rather than deriving the footprint from another STM32H7 device. Start the layout with power and ground pins, then place decoupling capacitors beside their associated supply pins. Preserve short return paths for high-current and high-speed nets, and check that the 28 mm by 28 mm body fits the mechanical outline of the target enclosure.

Plan the power tree around the manufacturer requirements for each MCU power domain, including the internal-regulator configuration used by the STM32H7 family. Do not assume that the power strategy of a Cortex-M4 or Cortex-M7-only member can be copied unchanged. Review startup sequencing, external component values, monitored supply conditions, and firmware-controlled regulator modes, then validate them under maximum clock, temperature, and I/O activity.

Do not treat same-package membership as proof of functional equivalence. STM32H743BIT6, STM32H753BIT6, STM32H742BIT6, and STM32H750BIT6 do not reproduce the Cortex-M4 processing resource of STM32H747BIT6. Before substitution, compare pin multiplexing, peripheral availability, interrupt topology, memory configuration, clock limits, regulator behavior, and boot requirements. Firmware startup code and linker configuration must also be revised.

Assign high-speed interfaces according to the datasheet's preferred pins and consult STMicroelectronics pin-compatibility guidance for any family substitution. Keep clocks away from noisy switching nodes, provide a continuous ground reference beneath signal routes, and control differential-pair geometry where required. In dual-core firmware, document which core owns each peripheral and use the manufacturer's synchronization guidance when multiple cores access shared resources.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Use the manufacturer product documentation or declaration of compliance for the exact STM32H747BIT6 orderable code. No specific compliance declaration is stated on the manufacturer product page text or distributor listings.

相关搜索

STM32H747BIT6 datasheet STM32H747BIT6 datasheet pdf STM32H747BIT6 pinout STM32H747BIT6 equivalent STM32H747BIT6 replacement STM32H747BIT6 cross reference STM32H747BIT6 footprint STM32H747BIT6 price STM32H747BIT6 stock STMicroelectronics STM32H747BIT6 STM32H747BIT6 vs STM32H743BIT6 STM32H747BIT6 dual core microcontroller

相关元器件 & 术语

STMicroelectronics STM32H747BIT6 STM32H743BIT6 STM32H753BIT6 STM32H742BIT6 STM32H750BIT6 STM32H747BIT6TR Arm Cortex-M7 Arm Cortex-M4 32-bit RISC microcontroller embedded microcontroller dual-core processor STM32H7 2 MB flash memory 208-LQFP LQFP family surface-mount package industrial automation industrial networking human-machine interface digital signal processing motor control test and measurement RoHS REACH
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情