STM32L031G6U6 - 32MHz Cortex-M0+ MCU, 32KB Flash | STMicroelectronics
料号: STM32L031G6U6 ✓ 量产中STM32L031G6U6 概述
A microcontroller is a programmable semiconductor device that integrates a CPU core, memory, and peripherals into one package. The Cortex-M0+ processor belongs to the Arm Cortex-M family and is designed for cost-sensitive embedded systems. In the power-management hierarchy, the STM32L031G6U6 is a battery-friendly embedded controller that can execute firmware while limiting standby and active-mode energy consumption.
Key specifications include a 32-bit Arm Cortex-M0+ core operating at 32 MHz, 32 KB of Flash for program storage, 8 KB of SRAM for working data, and 1 KB of EEPROM for nonvolatile parameter retention. The device also provides an extended I/O and peripheral set for low-power sensing, communication, control, and embedded accessory applications. Its 28-UFQFPN 4 x 4 mm package supports compact PCB designs where board area is constrained.
The STM32L031G6 family combines a straightforward Cortex-M0+ architecture with ultra-low-power operating modes. This makes it suitable for products that spend most of their service life in low-energy states, including portable sensors, compact industrial controls, compact accessories, and connected embedded nodes. Firmware can remain in low-power states between measurements or user interactions, reducing the energy burden associated with continuously powered systems.
Typical uses include battery-powered sensor nodes, compact industrial monitoring devices, low-power accessory controllers, home-automation endpoints, portable measurement instruments, and small motor or actuator control boards. The 32 MHz core provides adequate responsiveness for event-driven control, protocol handling, and moderate peripheral workloads without requiring a higher-performance Cortex-M processor.
When laying out a circuit, follow the manufacturer’s UFQFPN land pattern and pin-definition tables exactly. Keep power and decoupling connections short, provide the required clock and reset arrangements, and verify the exposed-pad connection and thermal strategy. Firmware migration between STM32L0 devices should also be checked against memory size, peripheral availability, and package pin assignment.
This product page combines the manufacturer’s core specifications, package details, source links, application guidance, and qualified replacement analysis to support faster component selection, schematic review, and sourcing decisions.
直接替换替代料: STM32L031G6U6 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: STM32L031G6U6 (相同外形与封装尺寸) ——差异在于 Maximum CPU Frequency, Package, Product Type, Flash Organization.
STM32F042G6U6
✅ 直接替换联系询价
查看数据手册 →STM32L031G6U6 最大额定值与电气特性
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M0+ |
| CPU Architecture | 32-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 KB |
| Flash Organization | 32K x 8 |
| SRAM | 8 KB |
| EEPROM | 1 KB |
| 封装 | 28-pin UFQFPN, 4 x 4 mm |
| 安装类型 | Surface mount |
| 工作温度范围 | -40 °C to +85 °C |
| Product Series | STM32L0 access line |
STM32L031G6U6 28-pin ufqfpn, 4 x 4 mm 引脚配置指南
STM32L031G6U6(28-pin ufqfpn, 4 x 4 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: STM32L031G6U6.
请参阅 数据手册 以查看完整引脚配置。
典型应用
STM32L031G6U6 适用于 6 应用s: Battery-Powered Sensor Node, Compact Industrial Monitoring Controller, Low-Power Home Automation Endpoint, Portable Measurement Instrument, Compact Accessory Controller, Smart Lighting Control Module.
Battery-Powered Sensor Node
The STM32L031G6U6 fits compact battery-powered sensing products because its 32 MHz Cortex-M0+ core provides enough processing capability for event-driven measurement, filtering, and local control while the device can use the low-power modes of the STM32L0 family. Its 32 KB of Flash accommodates a compact firmware image, while 8 KB of RAM supports protocol state and sensor buffering. The 28-UFQFPN 4 x 4 mm package also reduces board area compared with larger leaded or QFP controllers. Design the duty cycle around periodic wake-up operation and use the manufacturer’s low-power modes to reduce energy consumption between samples.
推荐
Compact Industrial Monitoring Controller
The STM32L031G6U6 is appropriate for small industrial monitoring modules that combine local sensing, status reporting, and simple control functions. Its 32-bit Arm Cortex-M0+ core runs at up to 32 MHz, giving adequate performance for peripheral management and event-driven logic without the complexity of a higher-tier processor. The 32 KB Flash, 8 KB RAM, and 1 KB EEPROM support embedded firmware, working buffers, and persistent configuration. The 4 x 4 mm UFQFPN package preserves PCB area, although designers should preserve the exposed-pad land and thermal copper path specified by the manufacturer.
推荐
Low-Power Home Automation Endpoint
The STM32L031G6U6 can serve as the controller for a compact home-automation endpoint that measures environmental conditions or reacts to user inputs. Its Cortex-M0+ architecture handles timers, serial communication, and basic control logic, while the STM32L0 family’s low-power focus supports designs that remain idle for extended periods. The 32 KB Flash and 8 KB RAM are suitable for protocol handlers and small application state machines. A production board should use the exact manufacturer pin assignments because communication, wake, and debug functions must remain available while unused pins and the exposed pad are handled correctly.
推荐
Portable Measurement Instrument
The STM32L031G6U6 suits portable instruments in which measurement control, display updates, and user interaction must coexist with a compact footprint. The 32 MHz Cortex-M0+ core can execute acquisition sequencing, calibration logic, and UI updates, while 8 KB of RAM provides space for buffers and 32 KB of Flash supports application firmware. Its small 28-pin UFQFPN package is valuable in handheld products where board area and energy use are constrained. Designers should verify the required analog, timer, and communication resources in the STM32L031G6 datasheet before assigning functions to pins.
推荐
Compact Accessory Controller
The STM32L031G6U6 is effective in compact accessories requiring a small embedded controller, such as configurable control modules, compact interface units, and low-energy peripheral controllers. Its 32-bit Cortex-M0+ architecture provides deterministic control execution at up to 32 MHz, while the 32 KB Flash and 8 KB RAM cover typical protocol and state-management workloads. The 28-pin UFQFPN package enables dense layouts but demands careful land-pattern execution and exposed-pad handling. Firmware should use the manufacturer’s startup and low-power guidance to avoid adding idle current through peripherals or I/O states.
推荐
Smart Lighting Control Module
The STM32L031G6U6 can implement a compact smart-lighting controller that coordinates user inputs, schedules, status feedback, and communication traffic. The 32 MHz Cortex-M0+ core is sufficient for real-time switching logic and peripheral servicing, while the 8 KB RAM and 32 KB Flash support lightweight control firmware and local configuration. Its small UFQFPN footprint is useful in integrated lighting products where space is restricted. The controller should be evaluated for the required timing accuracy, output-driver interface, standby behavior, and automotive qualification needs of the finished product rather than for MCU performance alone.
推荐
推荐产品汇总
工程参考数据: STM32L031G6U6 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | STM32F042G6U6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 28-UFQFPN (4x4) | 28-UFQFPN (4x4) |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 48 MHz |
| Flash Memory | 32 KB | 32 KB |
| RAM | 8 KB | 8 KB |
| EEPROM | 1 KB | 1 KB |
| Product Series | STM32L0 access line | STM32F0 |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C |
| Low-Power Focus | Ultra-low-power STM32L0 access line | STM32F0 general-purpose family |
| Pin Count | 28 pins | 28 pins |
| Price Tier | Request a quote | Request a quote |
关键差异点
- Lower maximum clock frequency supports a more conservative processing target (对比 STM32F042G6U6)
- Specialized ultra-low-power product positioning (对比 STM32F042G6U6)
- Matches the established STM32L031G6 family memory architecture (对比 STM32F042G6U6)
设计说明
Use the exact STM32L031G6U6 UFQFPN land pattern, including its exposed thermal pad, rather than a generic 28-pin QFN footprint. Confirm pad dimensions, pin numbering, solder-mask clearance, and paste stencil design against the manufacturer package drawing. The target uses a compact 4 x 4 mm package, so routing escape from inner rows and thermal-via placement require particular care.
Place the required local bypass capacitance directly beside the device power pins and keep the return-current path continuous through the exposed-pad land. Avoid routing sensitive signals beneath the MCU’s switching supply and high-current output paths. Select external components for the voltage range, startup behavior, and low-power current budget of the completed design after checking the family datasheet.
Do not treat the 28-UFQFPN package match between STM32L031G6U6 and STM32F042G6U6 as proof of complete interchangeability. Check every used GPIO, alternate function, timer channel, communication peripheral, clock pin, debug pin, and exposed-pad connection. Firmware, startup code, interrupt vectors, and low-power settings may also require revision when changing device families.
Keep clock, debug-programming, and communication routes short and away from noisy switching nodes. If the board supports external communication or sensor signals, route them over a continuous ground reference and follow the manufacturer’s recommended input filtering. Confirm that unused pins are left in states that do not increase leakage or prevent the intended low-power state.
合规信息
The operating temperature range is -40 °C to +85 °C. RoHS, REACH, halogen-free, lead-free, and conflict-minerals status require confirmation for the exact orderable device.