SY87724LHY - 3.3V 2.7GHz AnyRate MUX/DEMUX | Microchip
料号: SY87724LHY ✗ 停产SY87724LHY 概述
An AnyRate multiplexer/demultiplexer is a high-speed interface IC that redistributes serial data across parallel-width channels while allowing the data rate to be adapted according to system requirements. In the interface hierarchy, the SY87724LHY belongs to the MUX/DEMUX class of interface ICs and ultimately functions as a semiconductor signal-routing device. Its protocol-transparent architecture separates traffic-management functions from the lower-level data format, simplifying integration into network equipment.
The principal operating characteristics are a 3.3 V supply, operation up to 2.7 GHz, support for 4-, 5-, 8-, and 10-bit bus widths, and a programmable or 10-bit parallel control interface. Differential clock inputs and differential serial data paths are important for systems operating at multi-gigabit line rates. Synchronous frame-boundary indication gives the surrounding framer logic a defined timing reference for identifying frame boundaries.
The SY87724LHY is designed for protocol-transparent MUX/DEMUX operation, allowing it to combine or separate serial lanes without becoming dependent on one specific packet format. The availability of several supported bus widths makes it useful where equipment must accommodate different aggregation levels. Programmable operation provides additional flexibility when system traffic rates or board configurations differ, while the 10-bit parallel interface supports direct connection to compatible framer and line-card control logic.
Typical applications include telecommunications line cards, network switches, routers, serial backplane equipment, and high-speed test systems. In these systems, the device can aggregate several narrow serial channels into a wider internal bus or distribute a wide channel into narrower external links. Synchronous frame-boundary information supports equipment that must maintain deterministic framing relationships across multiplexed or demultiplexed data paths.
PCB design should prioritize controlled-impedance routing for differential clock and data nets, with symmetrical geometry and continuous reference planes. The 80-pin TQFP also requires careful thermal and power distribution because high-speed interface ICs can combine substantial switching activity with a 3.3 V supply. Decoupling should be placed directly at supply pins, while exposed-pad or thermal requirements must follow the package drawing in the manufacturer documentation.
This page consolidates the device function, operating limits, package information, comparison points, and practical interface-design guidance. It also distinguishes the exact SY87724LHY ordering code from related family documentation and highlights where additional electrical or pin-level information is needed before schematic release.
直接替换替代料: SY87724LHY ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: SY87724LHY (相同外形与封装尺寸) ——差异在于 Control Interface, Package, Product Type.
SY87724LHI
✅ 直接替换联系询价
查看数据手册 →SY87724LHY 规格参数
| Product Type | 3.3 V AnyRate serial-data multiplexer/demultiplexer |
| 电源电压 | 3.3 V |
| Maximum Operating Frequency | 2.7 GHz |
| Supported Bus Widths | 4-bit, 5-bit, 8-bit, and 10-bit |
| MUX/DEMUX Operation | Protocol-transparent |
| Control Interface | Programmable or 10-bit parallel |
| Clock Input | Differential |
| Serial Data Inputs | Differential |
| Serial Data Outputs | Differential |
| Frame Boundary Indication | Synchronous |
| Control Method | Controlled by framer logic |
| 封装 | TQFP-80 |
| Package Pin Count | 80 pins |
| RoHS Compliance | unknown |
SY87724LHY 80 pins 引脚配置指南
SY87724LHY(80 pins 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: SY87724LHY.
请参阅 数据手册 以查看完整引脚配置。
典型应用
SY87724LHY 适用于 6 应用s: Telecommunications Line Cards, Router Backplane Interfaces, Network Switching Equipment, High-Speed Test Equipment, Serial Backplane Equipment, Framer and Serial Interface Modules.
Telecommunications Line Cards
The SY87724LHY fits telecommunications line cards that must aggregate or distribute high-speed serial data without embedding a single fixed protocol into the interface device. Its 3.3 V operation and capability up to 2.7 GHz align with high-speed line-card signal paths, while the 4-, 5-, 8-, and 10-bit bus options permit different channel organizations. Differential clock and data inputs help preserve signal integrity on controlled-impedance routes. In a line-card design, the device can place narrow external channels onto a wider internal path or separate a wider internal stream into narrower framer channels. Programmable or 10-bit parallel control and synchronous frame-boundary indication simplify coordination with surrounding framer logic.
推荐
Router Backplane Interfaces
The SY87724LHY is a candidate for router backplane interfaces requiring protocol-transparent conversion between parallel internal widths and differential serial channels. Its support for 4-, 5-, 8-, and 10-bit buses allows a common interface family to serve different routing-engine connections, while operation up to 2.7 GHz supports high-speed traffic paths. The designer can use the programmable or 10-bit parallel interface to connect the device to framer logic. Differential clock and serial-data connections are appropriate for carefully controlled backplane routing. The principal design consideration is maintaining adequate impedance continuity, return-path continuity, and isolation between adjacent high-speed lanes while accounting for the complete line-rate budget.
推荐
Network Switching Equipment
The SY87724LHY can support network switching equipment that needs flexible serial-channel aggregation beside packet-processing logic. Its AnyRate architecture operates up to 2.7 GHz and supports multiple bus widths, making it suitable for paths that combine or separate channels according to port configuration. Because operation is protocol-transparent, the switching datapath can retain control of frame interpretation while the interface IC handles lane routing. Differential clock and data paths suit controlled-impedance printed-circuit routing, and synchronous frame-boundary indication provides a timing reference to the external framer logic. Before implementation, engineers should verify channel mapping, reset behavior, control timing, and whether the selected operating mode fits the switch architecture.
推荐
High-Speed Test Equipment
The SY87724LHY is suitable for high-speed test and measurement systems that need to route serial test traffic among parallel acquisition, pattern-generation, or switching subsystems. Its operation up to 2.7 GHz and protocol-transparent MUX/DEMUX behavior allow the test architecture to change data-path organization without embedding protocol-specific handling in the routing device. The 4-, 5-, 8-, and 10-bit widths provide useful flexibility for instrumentation with different internal lane counts. Differential clock and serial paths support controlled-impedance test boards, while programmable or 10-bit parallel control permits coordination with external test logic. The implementation must include accurate lane mapping, calibration, timing-margin analysis, and controlled clock distribution to preserve deterministic measurements.
推荐
Serial Backplane Equipment
The SY87724LHY can be used in serial backplane equipment to distribute high-speed channels between cards or between a controller and I/O modules. Operation up to 2.7 GHz supports demanding serial links, and the available 4-, 5-, 8-, and 10-bit organizations allow the physical routing layer to match board architecture. Differential clock and serial-data paths are particularly relevant to compact backplanes where crosstalk and impedance variation can limit performance. The device should be driven by framer logic through its programmable or 10-bit parallel interface, with synchronization established before traffic is enabled. Layout review should include insertion-loss budgets, layer transitions, connector effects, and return-path continuity across the complete backplane rather than only within the IC footprint.
推荐
Framer and Serial Interface Modules
The SY87724LHY fits framer and serial-interface modules that need to translate among external differential channels and wider internal bus structures. Its protocol-transparent operation up to 2.7 GHz keeps frame interpretation in the framer logic, while 4-, 5-, 8-, and 10-bit widths support several internal lane arrangements. Synchronous frame-boundary indication gives the module a defined indication for handling alignment, and differential clock inputs support coherent routing across the board. In implementation, power and ground distribution must remain stable around the TQFP-80 device because simultaneous switching at high line rates can create local supply disturbance. Decoupling placement, controlled-impedance geometry, and verification of all 80 package connections are essential before fabrication.
推荐
工程参考数据: SY87724LHY ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | SY87724LHI |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | TQFP-80 | TQFP-80 |
| Product Type | AnyRate MUX/DEMUX | AnyRate MUX/DEMUX |
| Supply Voltage | 3.3 V | 3.3 V |
| Maximum Operating Frequency | 2.7 GHz | 2.7 GHz |
| Supported Bus Widths | 4-bit, 5-bit, 8-bit, and 10-bit | 4-bit, 5-bit, 8-bit, and 10-bit |
| Interface Arrangement | Differential clock and serial-data paths | Differential clock and serial-data paths |
| Control Interface | Programmable or 10-bit parallel | Programmable or 10-bit parallel |
| Frame Boundary Indication | Synchronous | Synchronous |
关键差异点
- Wide range of supported aggregation widths (对比 SY87724LHI)
- High-speed protocol-transparent data routing (对比 SY87724LHI)
- Direct integration with framer control logic (对比 SY87724LHI)
设计说明
Route differential clock and serial-data nets with matched geometry, a continuous reference plane, and the impedance required by the complete interface specification. Avoid changing layer or width abruptly near the TQFP-80 pads. Include receiver and driver characteristics, connector or package transitions, and loss-budget assumptions when validating the 2.7 GHz operating capability.
Place local 3.3 V decoupling immediately across the relevant supply and ground pins rather than relying on a remote bulk capacitor. Keep the 3.3 V distribution path wide enough for the expected switching current and provide a low-impedance ground return. Review every one of the 80 package connections against the package drawing and pin-description table before releasing the PCB netlist.
Do not treat the SY87724LHY and SY87724LHI ordering codes as interchangeable solely because both are associated with the 80-pin AnyRate family. Confirm the ordering-code temperature grade, pin assignments, electrical limits, and package dimensions in the manufacturer documentation. Also verify that the selected channel mode and bus width satisfy the system's rate, framing, and control requirements.
Synchronous frame-boundary indication depends on clean clock distribution and deterministic control timing. Keep the control interface and clock source away from noisy switching regions, maintain short return paths, and inspect the complete device pin assignment rather than inferring functions from bus width alone. Signal-integrity and power-integrity simulations should include realistic package and connector models.
合规信息
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is established for the exact SY87724LHY ordering code. Confirm compliance with the manufacturer or the authorized supply channel before environmental qualification.