T2081NXE8PTB - QorIQ T2 4-Core 1.533GHz PowerPC MPU | NXP
料号： T2081NXE8PTB ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $268.5 | $2,685.00 |
| 100 | $245 | $24,500.00 |
| 500 | $220 | $110,000.00 |
| 1,000 | $198 | $198,000.00 |
T2081NXE8PTB 概述
A microprocessor (MPU) is the central processing unit of an embedded computing system that integrates CPU cores, caches, memory controllers, and peripheral interfaces on a single die. The QorIQ T2 family sits in NXP's communications-processor hierarchy above the QorIQ T1 (T1040/T1024) and below the QorIQ T4 (T4240), targeting mid-range wired and wireless infrastructure, control-plane processing, and data-path offload applications where multi-core scalability and packet processing throughput matter.
Key features include four PowerPC e6500 dual-threaded cores (up to 8 threads), 32 KB I-cache and 32 KB D-cache per core with 256 KB shared backside L2, hardware virtualization (hypervisor) support, 64-bit DDR3/3L controller with ECC at 1.87 GT/s, two 10 GbE (XFI/KR) ports, eight 1 GbE MACs, three PCIe Gen 2 controllers, two SATA 2.0 ports, two USB 2.0 controllers, and integrated security (SEC) engines with hardware-accelerated crypto.
The T2081NXE8PTB is the smaller-footprint (25x25 mm FCPBGA) variant of the T2080 and is pin-compatible with the quad-core T1042, giving designers an upgrade path from T1042 designs to higher core count without board rework. The SoC is fabricated in 28 nm process technology, balancing performance per watt for thermally constrained networking line cards.
Typical applications include enterprise and SMB routers, LTE/small-cell base stations, network-attached storage (NAS), industrial control gateways, and secure VPN/UTM appliances. The dual 10 GbE and eight 1 GbE ports support line-rate packet inspection and forwarding, while DDR3L at 1.87 GT/s sustains deep packet buffer and routing table lookups.
When laying out the PCB, allocate a minimum 4-layer stack-up with continuous ground planes under the FCPBGA, follow NXP's layout guide for SerDes reference clock routing (impedance-controlled, length-matched differential pairs), and provide sufficient bulk decoupling near the core and memory rails to handle 1.533 GHz load transients during packet bursts.
This page synthesizes distributor pricing, drop-in alternatives drawn from the NXP QorIQ T2 family, and practical design notes not collected in a single manufacturer document, helping engineers choose between T2081, T2080, T1042, and competing 64-bit MPUs more efficiently.
直接替换替代料： T2081NXE8PTB ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： T2081NXE8PTB （相同外形与封装尺寸） ——差异在于 Mounting Type, Operating Temperature, Package, Process Technology, Core Processor.
快速对比工具——选择替代料号进行并排对比：
T2081NSE8PTB
✅ 直接替换✓ 有现货
$171 / 个
查看数据手册 →T2080NXE8PTB
✅ 直接替换✓ 有现货
$305 / 个
查看数据手册 →T1042NXE7PQA
✅ 直接替换📋 参考替代料（不在目录中）
T1024NSE7PQA
✅ 直接替换📋 参考替代料（不在目录中）
T2081NXN8PTB
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
T2081NXE8PTB 最大额定值与电气特性
| Core Processor | PowerPC e6500 |
| Number of Cores | 4 |
| Core Architecture | 64-bit |
| Operating Frequency | 1.533 GHz |
| Series | QorIQ T2 |
| Co-Processor/DSP | None (SEC engine for crypto) |
| RAM Controllers | DDR3, DDR3L with ECC |
| Memory Interface Speed | 1.87 GT/s |
| Ethernet | 8x 1 Gbps + 2x 10 Gbps (XFI/KR) |
| PCIe Controllers | 3x PCIe Gen 2 |
| SATA | 2x SATA 2.0 |
| USB | 2x USB 2.0 |
| 封装 | 896-FCPBGA (25x25 mm) |
| Process Technology | 28 nm |
| 工作温度 | 0C to +105C (extended: -40C to +105C) |
| 安装类型 | Surface Mount (FCPBGA) |
| Security Engine | SEC with hardware crypto |
| Hardware Virtualization | Yes (e6500 hypervisor) |
| RoHS 状态 | Compliant |
T2081NXE8PTB 896-fcpbga (25x25 mm) 引脚配置指南
T2081NXE8PTB（896-fcpbga (25x25 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： T2081NXE8PTB.
请参阅 数据手册 以查看完整引脚配置。
典型应用
T2081NXE8PTB 适用于 6 应用s: Enterprise and SMB Routers, LTE and Small-Cell Base Stations, Network-Attached Storage (NAS) Controllers, VPN and UTM Security Appliances, Industrial Control Gateways, Wireless LAN and 5G NR Controllers.
Enterprise and SMB Routers
The T2081NXE8PTB's dual 10 Gigabit Ethernet controllers plus eight 1 GbE MACs deliver line-rate routing throughput for enterprise and SMB branch routers. Its four e6500 cores handle the control plane (OSPF/BGP, routing-table updates, management plane) while hardware virtualization isolates data-plane forwarding, IPsec tunnels, and QoS classification. With DDR3L at 1.87 GT/s and 64-bit ECC, the SoC sustains deep routing-table lookups and buffer memory for WAN aggregation. Unlike a discrete multi-chip router design, the T2081NXE8PTB consolidates CPU, switching fabric, crypto (SEC engine), and SerDes on a single die, reducing BOM and power.
推荐
LTE and Small-Cell Base Stations
The T2081NXE8PTB's four e6500 cores running at 1.533 GHz deliver the throughput needed for Layer 2/Layer 3 processing in LTE eNodeB and small-cell base stations. Hardware virtualization enables simultaneous operation of real-time baseband L1 control, OAM/SON management plane, and the EPC S1/X2 interfaces without software interference. The SEC engine accelerates IPsec and Kasumi/Snow3G crypto for backhaul encryption, while dual 10 GbE ports aggregate fronthaul and backhaul traffic. DDR3L with ECC at 1.87 GT/s supports the deep cell, UE-context, and HARQ buffer tables required by 3GPP stacks.
推荐
Network-Attached Storage (NAS) Controllers
The T2081NXE8PTB's combination of dual 10 GbE, dual SATA 2.0, and three PCIe Gen 2 controllers makes it ideal for NAS controllers serving SMB and mid-market storage workloads. The four e6500 cores handle RAID parity, NFS/SMB protocol processing, and storage tiering concurrently, while hardware virtualization isolates tenant volumes in multi-tenant storage clouds. The DDR3L controller at 1.87 GT/s caches active dataset pages and metadata, accelerating random-read workloads. Compared with discrete CPU+SAS architectures, the T2081NXE8PTB integrates the entire controller on one die, lowering idle power and BOM cost.
推荐
VPN and UTM Security Appliances
The T2081NXE8PTB's SEC engine with hardware-accelerated IPsec, SSL/TLS, and Kasumi/Snow3G/AES makes it a strong choice for VPN concentrators and Unified Threat Management appliances. The four e6500 cores run the data-plane packet inspection (deep packet inspection, antivirus, intrusion prevention) while the SEC engine accelerates crypto at line rate. With dual 10 GbE plus eight 1 GbE ports, the SoC supports WAN aggregation and DMZ segmentation in a single appliance. Hardware virtualization allows isolation of customer VPN tunnels, security scan planes, and management interfaces in one chassis.
推荐
Industrial Control Gateways
The T2081NXE8PTB's combination of multi-Gigabit Ethernet, PCIe for industrial I/O cards, and hardware virtualization is well-suited for IEC 62443 industrial control gateways. The four e6500 cores handle real-time industrial protocols (EtherCAT, PROFINET, Modbus/TCP) while running a separate virtualized Linux instance for analytics. The SEC engine provides IPsec for OT/IT tunnel isolation. With operating temperature from 0C to +105C and 28 nm process technology, the SoC is reliable for factory-floor cabinets where ambient temperatures routinely exceed commercial specs. Compared with ARM SoCs, the e6500 cores deliver higher single-thread determinism.
推荐
Wireless LAN and 5G NR Controllers
The T2081NXE8PTB's dual 10 GbE ports, three PCIe Gen 2 controllers (for 5G NR PHY/SDR cards), and SEC engine make it a strong fit for 5G NR small-cell gNB-DU controllers and high-end WLAN gateways. The four e6500 cores process MAC/PHY coordination, RLC/PDCP protocols, and F1/Xn interface traffic simultaneously with hardware virtualization isolating CU and DU planes. The DDR3L controller at 1.87 GT/s buffers HARQ retransmissions and PDU segmentation context. Unlike fixed-function SoCs, the T2081NXE8PTB runs full Linux/SON orchestration stacks natively on the same die.
推荐
推荐产品汇总
工程参考数据： T2081NXE8PTB ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | T2081NSE8PTB | T2080NXE8PTB | T1042NXE7PQA | T1024NSE7PQA | T2081NXN8PTB |
|---|---|---|---|---|---|---|
| Package | 896-FCPBGA (25x25 mm) | 896-FCPBGA (25x25 mm) - same | 896-FCPBGA (25x25 mm) - same | 896-FCPBGA (25x25 mm) - same | 896-FCPBGA (25x25 mm) - same | 896-FCPBGA (25x25 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Number of Cores | 4 (e6500) | 4 (e6500) | 4 (e6500) | 4 (e5500) | 2 (e5500) | 4 (e6500) |
| Core Architecture | 64-bit PowerPC e6500 | 64-bit PowerPC e6500 | 64-bit PowerPC e6500 | 64-bit PowerPC e5500 | 64-bit PowerPC e5500 | 64-bit PowerPC e6500 |
| Operating Frequency | 1.533 GHz | 1.533 GHz | 1.8 GHz | 1.4 GHz | 1.4 GHz | 1.5 GHz |
| DDR3/3L Speed | 1.87 GT/s | 1.87 GT/s | 1.87 GT/s | 1.6 GT/s | 1.6 GT/s | 1.87 GT/s |
| 10 Gigabit Ethernet | 2x 10 GbE (XFI/KR) | 2x 10 GbE | 2x 10 GbE | 1x 10 GbE | None (1 GbE only) | 2x 10 GbE |
| Hardware Virtualization | Yes (e6500 hypervisor) | Yes | Yes | Limited (e5500) | Limited (e5500) | Yes |
关键差异点
- Quad-core 1.533 GHz e6500 with hardware virtualization （对比 T1042NXE7PQA)
- Dual 10 Gigabit Ethernet vs single on T1042 （对比 T1042NXE7PQA)
- DDR3/3L at 1.87 GT/s vs 1.6 GT/s on T1024 （对比 T1024NSE7PQA)
- Same 896-FCPBGA pinout as T1042, simpler upgrade path （对比 T2080NXE8PTB)
设计说明
The T2081NXE8PTB's 896-ball FCPBGA at 0.8 mm pitch requires a minimum 4-layer PCB stack-up with continuous ground and power planes under the BGA footprint. Use laser-drilled microvias (8 mil pad / 4 mil drill) for breakout and follow NXP's recommended via-in-pad construction for the inner rows. Estimated: a single 896-ball BGA at 0.8 mm pitch on 1 oz copper inner layers with 0.2 mm dielectric typically yields ~0.6 mOhm via resistance per ball - small but cumulative at high-current switching.
SerDes lane routing for the 10 GbE XFI/KR interfaces requires impedance-controlled differential pairs (100 ohm differential, 90 ohm common-mode) with length matching to within 5 mils on a given lane. Reference-clock traces must be length-matched to within 50 mils of the data pair, and kept clear of noisy power rails. Place AC-coupling capacitors at the SoC side of each transmit pair, not at the PHY side. NXP's QorIQ SerDes layout guide provides lane-by-lane PCB stack-up recommendations - violating these typically causes 10 GbE link-up failure or bit-error-rate degradation under load.
At full load (4 cores @ 1.533 GHz, dual 10 GbE active, SEC engine running) the T2081NXE8PTB's typical power dissipation is ~14-18 W. The 25x25 mm FCPBGA has a theta_JC of ~0.4 C/W and a theta_JA of ~14 C/W with proper thermal via array under the lid. Estimated: 18 W at theta_JA 14 C/W gives a 252C junction rise above ambient; an aluminum heatsink (1 C/W) drops this to ~70C rise, well within the 105C operating limit. A thermal via array of 0.3 mm holes on a 0.8 mm grid under the die pad is mandatory.
The T2081NXE8PTB requires multiple voltage rails (VDD_CORE at ~1.0 V, VDD_DDR at 1.5 V/1.35 V for DDR3/DDR3L, SerDes analog 1.0 V and 1.35 V, I/O at 1.8/2.5/3.3 V). Each rail needs its own bulk decoupling (220 uF polymer + 22 uF ceramic) within 5 mm of the BGA. Inrush during cold-boot can spike to 30 A on VDD_CORE - design the DC-DC converter with sufficient output capacitance and soft-start to limit inrush below the SoC's maximum di/dt spec.
A common mistake is treating T2081 and T1042 firmware as interchangeable. Although both fit the 896-FCPBGA, the boot ROM, RCW (Reset Configuration Word) pin assignments, and DDR3L training sequences differ between e6500 and e5500 cores. Migrating from T1042 to T2081 requires re-validating RCW straps and re-flashing U-Boot for the new SoC. Another pitfall is omitting the DDR3 Vref training - the T2081NXE8PTB must complete write/read leveling before any traffic; failing to budget time for this in the bootloader typically causes kernel panic on first boot.
合规信息
RoHS and REACH compliance per NXP product page. AEC-Q100 not applicable - this is a communications processor, not an automotive-grade part. Halogen-free per NXP product brief.
