T2081NXE8PTB - QorIQ T2 4-Core 1.533GHz PowerPC MPU | NXP
部品番号: T2081NXE8PTB ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $268.5 | $2,685.00 |
| 100 | $245 | $24,500.00 |
| 500 | $220 | $110,000.00 |
| 1,000 | $198 | $198,000.00 |
T2081NXE8PTB 概要
A microprocessor (MPU) is the central processing unit of an embedded computing system that integrates CPU cores, caches, memory controllers, and peripheral interfaces on a single die. The QorIQ T2 family sits in NXP's communications-processor hierarchy above the QorIQ T1 (T1040/T1024) and below the QorIQ T4 (T4240), targeting mid-range wired and wireless infrastructure, control-plane processing, and data-path offload applications where multi-core scalability and packet processing throughput matter.
Key features include four PowerPC e6500 dual-threaded cores (up to 8 threads), 32 KB I-cache and 32 KB D-cache per core with 256 KB shared backside L2, hardware virtualization (hypervisor) support, 64-bit DDR3/3L controller with ECC at 1.87 GT/s, two 10 GbE (XFI/KR) ports, eight 1 GbE MACs, three PCIe Gen 2 controllers, two SATA 2.0 ports, two USB 2.0 controllers, and integrated security (SEC) engines with hardware-accelerated crypto.
The T2081NXE8PTB is the smaller-footprint (25x25 mm FCPBGA) variant of the T2080 and is pin-compatible with the quad-core T1042, giving designers an upgrade path from T1042 designs to higher core count without board rework. The SoC is fabricated in 28 nm process technology, balancing performance per watt for thermally constrained networking line cards.
Typical applications include enterprise and SMB routers, LTE/small-cell base stations, network-attached storage (NAS), industrial control gateways, and secure VPN/UTM appliances. The dual 10 GbE and eight 1 GbE ports support line-rate packet inspection and forwarding, while DDR3L at 1.87 GT/s sustains deep packet buffer and routing table lookups.
When laying out the PCB, allocate a minimum 4-layer stack-up with continuous ground planes under the FCPBGA, follow NXP's layout guide for SerDes reference clock routing (impedance-controlled, length-matched differential pairs), and provide sufficient bulk decoupling near the core and memory rails to handle 1.533 GHz load transients during packet bursts.
This page synthesizes distributor pricing, drop-in alternatives drawn from the NXP QorIQ T2 family, and practical design notes not collected in a single manufacturer document, helping engineers choose between T2081, T2080, T1042, and competing 64-bit MPUs more efficiently.
ドロップイン代替品: T2081NXE8PTB — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: T2081NXE8PTB （同一形状・フットプリント） — 相違点: Mounting Type, Operating Temperature, Package, Process Technology, Core Processor.
クイック比較ツール — 並列比較する代替部品を選択:
T2081NSE8PTB
✅ ドロップイン✓ 在庫あり
$171 / 個
データシートを見る →T2080NXE8PTB
✅ ドロップイン✓ 在庫あり
$305 / 個
データシートを見る →T1042NXE7PQA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
T1024NSE7PQA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
T2081NXN8PTB
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
T2081NXE8PTB 最大定格＆電気的特性
| Core Processor | PowerPC e6500 |
| Number of Cores | 4 |
| Core Architecture | 64-bit |
| Operating Frequency | 1.533 GHz |
| Series | QorIQ T2 |
| Co-Processor/DSP | None (SEC engine for crypto) |
| RAM Controllers | DDR3, DDR3L with ECC |
| Memory Interface Speed | 1.87 GT/s |
| Ethernet | 8x 1 Gbps + 2x 10 Gbps (XFI/KR) |
| PCIe Controllers | 3x PCIe Gen 2 |
| SATA | 2x SATA 2.0 |
| USB | 2x USB 2.0 |
| パッケージ | 896-FCPBGA (25x25 mm) |
| Process Technology | 28 nm |
| 動作温度 | 0C to +105C (extended: -40C to +105C) |
| 実装タイプ | Surface Mount (FCPBGA) |
| Security Engine | SEC with hardware crypto |
| Hardware Virtualization | Yes (e6500 hypervisor) |
| RoHS ステータス | Compliant |
T2081NXE8PTB 896-fcpbga (25x25 mm) ピン配置ガイド
T2081NXE8PTB (896-fcpbga (25x25 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: T2081NXE8PTB.
詳細は データシート をご参照ください。
主な用途
T2081NXE8PTB の用途: 6 件s: Enterprise and SMB Routers, LTE and Small-Cell Base Stations, Network-Attached Storage (NAS) Controllers, VPN and UTM Security Appliances, Industrial Control Gateways, Wireless LAN and 5G NR Controllers.
Enterprise and SMB Routers
The T2081NXE8PTB's dual 10 Gigabit Ethernet controllers plus eight 1 GbE MACs deliver line-rate routing throughput for enterprise and SMB branch routers. Its four e6500 cores handle the control plane (OSPF/BGP, routing-table updates, management plane) while hardware virtualization isolates data-plane forwarding, IPsec tunnels, and QoS classification. With DDR3L at 1.87 GT/s and 64-bit ECC, the SoC sustains deep routing-table lookups and buffer memory for WAN aggregation. Unlike a discrete multi-chip router design, the T2081NXE8PTB consolidates CPU, switching fabric, crypto (SEC engine), and SerDes on a single die, reducing BOM and power.
おすすめ
LTE and Small-Cell Base Stations
The T2081NXE8PTB's four e6500 cores running at 1.533 GHz deliver the throughput needed for Layer 2/Layer 3 processing in LTE eNodeB and small-cell base stations. Hardware virtualization enables simultaneous operation of real-time baseband L1 control, OAM/SON management plane, and the EPC S1/X2 interfaces without software interference. The SEC engine accelerates IPsec and Kasumi/Snow3G crypto for backhaul encryption, while dual 10 GbE ports aggregate fronthaul and backhaul traffic. DDR3L with ECC at 1.87 GT/s supports the deep cell, UE-context, and HARQ buffer tables required by 3GPP stacks.
おすすめ
Network-Attached Storage (NAS) Controllers
The T2081NXE8PTB's combination of dual 10 GbE, dual SATA 2.0, and three PCIe Gen 2 controllers makes it ideal for NAS controllers serving SMB and mid-market storage workloads. The four e6500 cores handle RAID parity, NFS/SMB protocol processing, and storage tiering concurrently, while hardware virtualization isolates tenant volumes in multi-tenant storage clouds. The DDR3L controller at 1.87 GT/s caches active dataset pages and metadata, accelerating random-read workloads. Compared with discrete CPU+SAS architectures, the T2081NXE8PTB integrates the entire controller on one die, lowering idle power and BOM cost.
おすすめ
VPN and UTM Security Appliances
The T2081NXE8PTB's SEC engine with hardware-accelerated IPsec, SSL/TLS, and Kasumi/Snow3G/AES makes it a strong choice for VPN concentrators and Unified Threat Management appliances. The four e6500 cores run the data-plane packet inspection (deep packet inspection, antivirus, intrusion prevention) while the SEC engine accelerates crypto at line rate. With dual 10 GbE plus eight 1 GbE ports, the SoC supports WAN aggregation and DMZ segmentation in a single appliance. Hardware virtualization allows isolation of customer VPN tunnels, security scan planes, and management interfaces in one chassis.
おすすめ
Industrial Control Gateways
The T2081NXE8PTB's combination of multi-Gigabit Ethernet, PCIe for industrial I/O cards, and hardware virtualization is well-suited for IEC 62443 industrial control gateways. The four e6500 cores handle real-time industrial protocols (EtherCAT, PROFINET, Modbus/TCP) while running a separate virtualized Linux instance for analytics. The SEC engine provides IPsec for OT/IT tunnel isolation. With operating temperature from 0C to +105C and 28 nm process technology, the SoC is reliable for factory-floor cabinets where ambient temperatures routinely exceed commercial specs. Compared with ARM SoCs, the e6500 cores deliver higher single-thread determinism.
おすすめ
Wireless LAN and 5G NR Controllers
The T2081NXE8PTB's dual 10 GbE ports, three PCIe Gen 2 controllers (for 5G NR PHY/SDR cards), and SEC engine make it a strong fit for 5G NR small-cell gNB-DU controllers and high-end WLAN gateways. The four e6500 cores process MAC/PHY coordination, RLC/PDCP protocols, and F1/Xn interface traffic simultaneously with hardware virtualization isolating CU and DU planes. The DDR3L controller at 1.87 GT/s buffers HARQ retransmissions and PDU segmentation context. Unlike fixed-function SoCs, the T2081NXE8PTB runs full Linux/SON orchestration stacks natively on the same die.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: T2081NXE8PTB — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | T2081NSE8PTB | T2080NXE8PTB | T1042NXE7PQA | T1024NSE7PQA | T2081NXN8PTB |
|---|---|---|---|---|---|---|
| Package | 896-FCPBGA (25x25 mm) | 896-FCPBGA (25x25 mm) - same | 896-FCPBGA (25x25 mm) - same | 896-FCPBGA (25x25 mm) - same | 896-FCPBGA (25x25 mm) - same | 896-FCPBGA (25x25 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Number of Cores | 4 (e6500) | 4 (e6500) | 4 (e6500) | 4 (e5500) | 2 (e5500) | 4 (e6500) |
| Core Architecture | 64-bit PowerPC e6500 | 64-bit PowerPC e6500 | 64-bit PowerPC e6500 | 64-bit PowerPC e5500 | 64-bit PowerPC e5500 | 64-bit PowerPC e6500 |
| Operating Frequency | 1.533 GHz | 1.533 GHz | 1.8 GHz | 1.4 GHz | 1.4 GHz | 1.5 GHz |
| DDR3/3L Speed | 1.87 GT/s | 1.87 GT/s | 1.87 GT/s | 1.6 GT/s | 1.6 GT/s | 1.87 GT/s |
| 10 Gigabit Ethernet | 2x 10 GbE (XFI/KR) | 2x 10 GbE | 2x 10 GbE | 1x 10 GbE | None (1 GbE only) | 2x 10 GbE |
| Hardware Virtualization | Yes (e6500 hypervisor) | Yes | Yes | Limited (e5500) | Limited (e5500) | Yes |
主な差別化要因
- Quad-core 1.533 GHz e6500 with hardware virtualization （vs T1042NXE7PQA)
- Dual 10 Gigabit Ethernet vs single on T1042 （vs T1042NXE7PQA)
- DDR3/3L at 1.87 GT/s vs 1.6 GT/s on T1024 （vs T1024NSE7PQA)
- Same 896-FCPBGA pinout as T1042, simpler upgrade path （vs T2080NXE8PTB)
設計ノート
The T2081NXE8PTB's 896-ball FCPBGA at 0.8 mm pitch requires a minimum 4-layer PCB stack-up with continuous ground and power planes under the BGA footprint. Use laser-drilled microvias (8 mil pad / 4 mil drill) for breakout and follow NXP's recommended via-in-pad construction for the inner rows. Estimated: a single 896-ball BGA at 0.8 mm pitch on 1 oz copper inner layers with 0.2 mm dielectric typically yields ~0.6 mOhm via resistance per ball - small but cumulative at high-current switching.
SerDes lane routing for the 10 GbE XFI/KR interfaces requires impedance-controlled differential pairs (100 ohm differential, 90 ohm common-mode) with length matching to within 5 mils on a given lane. Reference-clock traces must be length-matched to within 50 mils of the data pair, and kept clear of noisy power rails. Place AC-coupling capacitors at the SoC side of each transmit pair, not at the PHY side. NXP's QorIQ SerDes layout guide provides lane-by-lane PCB stack-up recommendations - violating these typically causes 10 GbE link-up failure or bit-error-rate degradation under load.
At full load (4 cores @ 1.533 GHz, dual 10 GbE active, SEC engine running) the T2081NXE8PTB's typical power dissipation is ~14-18 W. The 25x25 mm FCPBGA has a theta_JC of ~0.4 C/W and a theta_JA of ~14 C/W with proper thermal via array under the lid. Estimated: 18 W at theta_JA 14 C/W gives a 252C junction rise above ambient; an aluminum heatsink (1 C/W) drops this to ~70C rise, well within the 105C operating limit. A thermal via array of 0.3 mm holes on a 0.8 mm grid under the die pad is mandatory.
The T2081NXE8PTB requires multiple voltage rails (VDD_CORE at ~1.0 V, VDD_DDR at 1.5 V/1.35 V for DDR3/DDR3L, SerDes analog 1.0 V and 1.35 V, I/O at 1.8/2.5/3.3 V). Each rail needs its own bulk decoupling (220 uF polymer + 22 uF ceramic) within 5 mm of the BGA. Inrush during cold-boot can spike to 30 A on VDD_CORE - design the DC-DC converter with sufficient output capacitance and soft-start to limit inrush below the SoC's maximum di/dt spec.
A common mistake is treating T2081 and T1042 firmware as interchangeable. Although both fit the 896-FCPBGA, the boot ROM, RCW (Reset Configuration Word) pin assignments, and DDR3L training sequences differ between e6500 and e5500 cores. Migrating from T1042 to T2081 requires re-validating RCW straps and re-flashing U-Boot for the new SoC. Another pitfall is omitting the DDR3 Vref training - the T2081NXE8PTB must complete write/read leveling before any traffic; failing to budget time for this in the bootloader typically causes kernel panic on first boot.
コンプライアンス情報
RoHS and REACH compliance per NXP product page. AEC-Q100 not applicable - this is a communications processor, not an automotive-grade part. Halogen-free per NXP product brief.
