TAS5508APAG - 8-Channel Digital Audio PWM Processor | Texas Instruments
料号: TAS5508APAG ✓ 量产中TAS5508APAG 概述
A digital audio PWM processor is a specialized interface IC that converts or prepares digital audio data for power-amplifier stages. It sits between an audio DSP, codec, or source controller and the power-amplifier output network. Within the signal chain, the hierarchy is digital audio processor, audio interface IC, PWM modulator, and power-management semiconductor. Integrating eight channels in one package reduces the number of separate control devices required for surround-sound and multichannel installations.
The TAS5508APAG combines an 8-channel architecture with support for audio sample rates up to 192 kHz. This makes it appropriate for high-resolution consumer and professional audio systems operating at standard CD, DVD, multichannel cinema, and higher-rate digital audio sampling frequencies. Its 64-TQFP package provides a substantial number of external connections for digital audio data, clock signals, control signals, and power connections.
The processor integrates digital control for eight audio output channels and is designed to operate with compatible digital signal processors and audio power stages. Automatic control configuration in response to clock and data conditions is associated with the TAS5508 family, helping the device adapt to changing digital-audio operating states. System designers should use the manufacturer pin-description table and reference circuit when assigning the complete 64-pin land pattern.
Typical uses include 5.1-channel and 7.1-channel home-theater systems, professional digital mixing consoles, active speaker networks, automotive audio systems, and powered multiway speakers. The eight-channel architecture is particularly useful where a single DSP must distribute synchronized control across multiple Class-D amplifier channels. The device is also suitable for high-resolution installations operating with audio sample rates between 32 kHz and 192 kHz.
Layout is critical because high-channel-count digital audio processors combine clock-sensitive signals with power-supply connections in a 10 x 10 mm TQFP footprint. Keep clock and data traces short, route them away from switching-node and power-converter traces, and place decoupling capacitors close to their associated supply pins. Follow the manufacturer’s recommended component values and pin-specific connection instructions to avoid signal-integrity problems.
This page consolidates the device identity, package information, supported sample-rate range, sourcing information, compatible family references, and practical implementation guidance into one engineering-focused reference. It helps engineers separate confirmed product characteristics from details that require direct verification against the current Texas Instruments datasheet.
直接替换替代料: TAS5508APAG ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
TAS5508PAG
✅ 直接替换联系询价
查看数据手册 →TAS5508CPAGR
✅ 直接替换📋 参考替代料(不在目录中)
TAS5508APAGR
✅ 直接替换📋 参考替代料(不在目录中)
TAS5508APAG 最大额定值与电气特性
| Product Type | 8-channel digital audio PWM processor |
| Device Category | Audio modulator |
| Number of Audio Channels | 8 channels |
| Supported Sample Rate | 32 kHz to 192 kHz |
| 封装 | 64-pin TQFP |
| Package Dimensions | 10 x 10 mm |
| 安装类型 | Surface mount |
| Shipping Format | Tray |
| Manufacturer | Texas Instruments |
| Primary Interface | Digital audio interface |
| PWM Output Channels | 8 channels |
| Maximum Sample Rate | 192 kHz |
| Minimum Sample Rate | 32 kHz |
| 引脚数量 | 64 pins |
TAS5508APAG 10 x 10 mm 引脚配置指南
TAS5508APAG(10 x 10 mm 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: TAS5508APAG.
请参阅 数据手册 以查看完整引脚配置。
典型应用
TAS5508APAG 适用于 6 应用s: 5.1-Channel Home Theater Amplifier, 7.1-Channel Surround-Sound System, Professional Digital Mixing Console, Active Multiway Speaker System, Automotive Multi-Channel Audio Head Unit, Powered Multi-Channel Speaker.
5.1-Channel Home Theater Amplifier
The TAS5508APAG fits a 5.1-channel home-theater system because one device can coordinate eight digital audio PWM channels while the architecture supports sample rates from 32 kHz to 192 kHz. A system DSP can provide synchronized channel data and timing, while the processor manages the interface toward compatible Class-D amplifier stages. The 64-pin TQFP package centralizes control connections and reduces the number of separate channel-controller devices. Designers should allocate clock and data routing away from switching power stages, verify all 64 pin functions against the manufacturer pin table, and confirm that the selected amplifier topology accepts the processor’s control signals.
推荐
7.1-Channel Surround-Sound System
The TAS5508APAG is appropriate for a 7.1-channel surround-sound amplifier because its 8-channel digital audio PWM organization can cover the seven primary channels plus an additional control channel in a coordinated design. Support for sample rates up to 192 kHz accommodates high-resolution source formats when the complete DSP-to-amplifier chain is configured for those rates. Using one processor package reduces channel-control wiring and keeps digital routing centralized. Timing margins, data-line loading, and ground-return paths must be evaluated carefully in systems with eight active channels, particularly when amplifier switching nodes are located near the audio processor.
推荐
Professional Digital Mixing Console
A professional digital mixing console can use the TAS5508APAG to translate multichannel digital audio control into signals for powered output stages. The processor’s 8-channel organization fits mixer designs with several monitor, zone, or effect-amplifier channels, while its 32-192 kHz range supports multiple professional source formats. The upstream DSP should supply stable clocking and unambiguous channel data, and the implementation must preserve timing integrity across every routed channel. Short clock routes, solid ground-plane continuity, and isolated power-supply return paths are especially important in a large console where switching converters and long signal interconnects coexist.
推荐
Active Multiway Speaker System
The TAS5508APAG can coordinate multiple amplifier channels in an active multiway speaker, especially where each driver requires synchronized digital control. Its eight-channel capacity allows a compact control section to manage several low-, mid-, and high-frequency amplifier paths from a common audio processor. The supported 32-192 kHz range provides flexibility for high-resolution playback sources and digital crossover processing. In a compact enclosure, thermal design and electromagnetic separation become important; keep switching-node copper away from clock traces, provide local supply bypassing, and verify the complete amplifier interface because PWM control and analog driver requirements differ.
推荐
Automotive Multi-Channel Audio Head Unit
The TAS5508APAG is suitable for a multichannel automotive head unit when the electrical, timing, and qualification requirements are met. Eight processed channels can support speaker groups, seat-level zones, and surround effects in a vehicle audio architecture, while the 32-192 kHz range supports multiple digital source rates. The processor reduces the number of separate digital audio controllers needed for those channels. Automotive implementation requires careful EMI planning, robust supply design, and qualification review; start with the manufacturer application information and confirm automotive-specific operating limits before releasing a production design.
推荐
Powered Multi-Channel Speaker
The TAS5508APAG is well suited to powered speaker designs that need several digitally controlled amplifier outputs without distributing control across many discrete channels. A system controller can send synchronized digital audio data to the processor, which coordinates the eight-channel PWM interface at rates from 32 kHz to 192 kHz. This architecture supports compact powered speakers for home cinema, conference rooms, hospitality audio, and distributed installation systems. Because the TQFP device handles sensitive clock and data connections, the layout should minimize trace length, maintain continuous ground planes, and isolate the digital section from the amplifier power-conversion stage.
推荐
推荐产品汇总
工程参考数据: TAS5508APAG ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | TAS5508PAG | TAS5508CPAGR | TAS5508APAGR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | TQFP-64 (10 x 10 mm) | TQFP-64 (10 x 10 mm) | TQFP-64 (10 x 10 mm) | TQFP-64 (10 x 10 mm) |
| Product Type | 8-channel digital audio PWM processor | 8-channel digital audio PWM processor | 8-channel digital pulse-width modulator | 8-channel digital audio PWM processor |
| Audio Channel Count | 8 channels | 8 channels | 8 channels | 8 channels |
| Supported Sample Rate | 32 kHz to 192 kHz | 32 kHz to 192 kHz | 32 kHz to 192 kHz | 32 kHz to 192 kHz |
| Pin Count | 64 pins | 64 pins | 64 pins | 64 pins |
| Shipping Configuration | Tray | Tray | Tape and reel | Tape and reel |
| Device Revision | A | Non-A designation | C | A |
| Cross-Reference Status | Original device | Same-family alternative | Identified as a complete replacement | Same-device reel shipping configuration |
关键差异点
- Eight-channel integration in one package (对比 TAS5504PAGR)
- Confirmed same-family replacement path (对比 TAS5508CPAGR)
- No channel-count penalty against the non-A family device (对比 TAS5508PAG)
设计说明
Treat clock and digital audio data as high-speed signals even though the TAS5508APAG is not an RF device. Route these nets from the source DSP to the assigned TQFP pins with short traces, continuous reference planes, and no unnecessary stubs. Keep switching-node and high-current amplifier-supply paths physically separated from the digital section, particularly on a densely populated Class-D amplifier board.
Use separate, short supply and ground connections according to the manufacturer application circuit, with local high-frequency decoupling placed directly beside the relevant pins. A multichannel Class-D system can introduce substantial switching current even though the audio processor itself is not the power stage. Verify supply ripple, transient response, and return-current paths under full eight-channel operation rather than relying on a lightly loaded bench condition.
Do not substitute a family member solely because it has the same 64-pin TQFP footprint. Compare pin names, power requirements, clock polarity, supported sample rates, register maps, and reset behavior across the exact revision being replaced. The TAS5508CPAGR is described as a complete replacement, but production equivalence still requires review of the relevant manufacturer datasheets and any firmware configuration changes.
Confirm that the upstream DSP, audio interface, clock source, and power-amplifier stages support a common sample-rate and timing configuration across the 32-192 kHz operating range. Check clock jitter, data setup and hold margins, channel synchronization, and reset sequencing using the manufacturer timing diagrams. Simulation with realistic layer transitions and loading is recommended before a high-channel-count board is released.
Keep the 64-pin TQFP surrounded by an uninterrupted ground region and avoid placing thermally isolated audio traces beneath it. Although the processor is not a power MOSFET, system heat is often generated by adjacent Class-D output stages. Evaluate junction temperature using the actual board copper, enclosure airflow, nearby heat sources, and the package thermal data in the manufacturer documentation instead of assuming standard test-board cooling.
合规信息
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are stated in the product information. Confirm these attributes using the manufacturer’s current compliance documentation and the exact orderable suffix.