Texas Instruments

TAS5508APAG - 8-Channel Digital Audio PWM Processor | Texas Instruments

MPN: TAS5508APAG ✓ פעיל
64-pin TQFP Package
כמות הזמנה מינימלית: 1 |

TAS5508APAG סקירה

The Texas Instruments TAS5508APAG is an 8-channel digital audio PWM processor for high-fidelity multichannel audio systems, housed in a 64-pin TQFP package measuring 10 x 10 mm. It supports sample rates from 32 kHz to 192 kHz and is categorized as a digital audio PWM processor and audio modulator. The device interfaces digital audio signals with external amplifier stages, providing centralized control for multichannel Class-D audio architectures.

A digital audio PWM processor is a specialized interface IC that converts or prepares digital audio data for power-amplifier stages. It sits between an audio DSP, codec, or source controller and the power-amplifier output network. Within the signal chain, the hierarchy is digital audio processor, audio interface IC, PWM modulator, and power-management semiconductor. Integrating eight channels in one package reduces the number of separate control devices required for surround-sound and multichannel installations.

The TAS5508APAG combines an 8-channel architecture with support for audio sample rates up to 192 kHz. This makes it appropriate for high-resolution consumer and professional audio systems operating at standard CD, DVD, multichannel cinema, and higher-rate digital audio sampling frequencies. Its 64-TQFP package provides a substantial number of external connections for digital audio data, clock signals, control signals, and power connections.

The processor integrates digital control for eight audio output channels and is designed to operate with compatible digital signal processors and audio power stages. Automatic control configuration in response to clock and data conditions is associated with the TAS5508 family, helping the device adapt to changing digital-audio operating states. System designers should use the manufacturer pin-description table and reference circuit when assigning the complete 64-pin land pattern.

Typical uses include 5.1-channel and 7.1-channel home-theater systems, professional digital mixing consoles, active speaker networks, automotive audio systems, and powered multiway speakers. The eight-channel architecture is particularly useful where a single DSP must distribute synchronized control across multiple Class-D amplifier channels. The device is also suitable for high-resolution installations operating with audio sample rates between 32 kHz and 192 kHz.

Layout is critical because high-channel-count digital audio processors combine clock-sensitive signals with power-supply connections in a 10 x 10 mm TQFP footprint. Keep clock and data traces short, route them away from switching-node and power-converter traces, and place decoupling capacitors close to their associated supply pins. Follow the manufacturer’s recommended component values and pin-specific connection instructions to avoid signal-integrity problems.

This page consolidates the device identity, package information, supported sample-rate range, sourcing information, compatible family references, and practical implementation guidance into one engineering-focused reference. It helps engineers separate confirmed product characteristics from details that require direct verification against the current Texas Instruments datasheet.

חלופות תחליף ישיר עבור TAS5508APAG — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם TAS5508APAG (אותו גורם צורה וטביעת רגל).

TAS5508PAG

✅ Drop-In
Texas Instruments
📦 TQFP-64 (10 x 10 mm)
8-channel digital audio PWM processor · Texas Instruments · 8 channels · Digital pulse-width modulation (PWM) · 64-pin TQFP · 64 pins · Surface mount

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

TAS5508CPAGR

✅ Drop-In
📦 TQFP-64 (10 x 10 mm)
Same 8-channel architecture and 64-pin package, with a 0% channel-count difference; the cross-reference identifies matching terminals and principal performance characteristics.

📋 חלופה להתייחסות (לא בקטלוג)

TAS5508APAGR

✅ Drop-In
📦 TQFP-64 (10 x 10 mm)
Same electrical device and 64-pin footprint with a 0% parameter difference; the primary distinction is reel rather than tray shipping configuration.

📋 חלופה להתייחסות (לא בקטלוג)

TAS5508APAG דירוגים מרביים ומאפיינים חשמליים

Product Type 8-channel digital audio PWM processor
Device Category Audio modulator
Number of Audio Channels 8 channels
Supported Sample Rate 32 kHz to 192 kHz
מארז 64-pin TQFP
Package Dimensions 10 x 10 mm
סוג הרכבה Surface mount
Shipping Format Tray
Manufacturer Texas Instruments
Primary Interface Digital audio interface
PWM Output Channels 8 channels
Maximum Sample Rate 192 kHz
Minimum Sample Rate 32 kHz
מספר פינים 64 pins

מדריך תצורת פינים של TAS5508APAG 10 x 10 mm

תצורת פינים עבור TAS5508APAG (מארזת 10 x 10 mm). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 10 x 10 mm עבור TAS5508APAG

אין נתוני פריסת פינים מפורטים עבור TAS5508APAG.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

TAS5508APAG מתאים עבור 6 יישוםs: 5.1-Channel Home Theater Amplifier, 7.1-Channel Surround-Sound System, Professional Digital Mixing Console, Active Multiway Speaker System, Automotive Multi-Channel Audio Head Unit, Powered Multi-Channel Speaker.

📺

5.1-Channel Home Theater Amplifier

The TAS5508APAG fits a 5.1-channel home-theater system because one device can coordinate eight digital audio PWM channels while the architecture supports sample rates from 32 kHz to 192 kHz. A system DSP can provide synchronized channel data and timing, while the processor manages the interface toward compatible Class-D amplifier stages. The 64-pin TQFP package centralizes control connections and reduces the number of separate channel-controller devices. Designers should allocate clock and data routing away from switching power stages, verify all 64 pin functions against the manufacturer pin table, and confirm that the selected amplifier topology accepts the processor’s control signals.

🎧

7.1-Channel Surround-Sound System

The TAS5508APAG is appropriate for a 7.1-channel surround-sound amplifier because its 8-channel digital audio PWM organization can cover the seven primary channels plus an additional control channel in a coordinated design. Support for sample rates up to 192 kHz accommodates high-resolution source formats when the complete DSP-to-amplifier chain is configured for those rates. Using one processor package reduces channel-control wiring and keeps digital routing centralized. Timing margins, data-line loading, and ground-return paths must be evaluated carefully in systems with eight active channels, particularly when amplifier switching nodes are located near the audio processor.

🎚️

Professional Digital Mixing Console

A professional digital mixing console can use the TAS5508APAG to translate multichannel digital audio control into signals for powered output stages. The processor’s 8-channel organization fits mixer designs with several monitor, zone, or effect-amplifier channels, while its 32-192 kHz range supports multiple professional source formats. The upstream DSP should supply stable clocking and unambiguous channel data, and the implementation must preserve timing integrity across every routed channel. Short clock routes, solid ground-plane continuity, and isolated power-supply return paths are especially important in a large console where switching converters and long signal interconnects coexist.

🔊

Active Multiway Speaker System

The TAS5508APAG can coordinate multiple amplifier channels in an active multiway speaker, especially where each driver requires synchronized digital control. Its eight-channel capacity allows a compact control section to manage several low-, mid-, and high-frequency amplifier paths from a common audio processor. The supported 32-192 kHz range provides flexibility for high-resolution playback sources and digital crossover processing. In a compact enclosure, thermal design and electromagnetic separation become important; keep switching-node copper away from clock traces, provide local supply bypassing, and verify the complete amplifier interface because PWM control and analog driver requirements differ.

🚗

Automotive Multi-Channel Audio Head Unit

The TAS5508APAG is suitable for a multichannel automotive head unit when the electrical, timing, and qualification requirements are met. Eight processed channels can support speaker groups, seat-level zones, and surround effects in a vehicle audio architecture, while the 32-192 kHz range supports multiple digital source rates. The processor reduces the number of separate digital audio controllers needed for those channels. Automotive implementation requires careful EMI planning, robust supply design, and qualification review; start with the manufacturer application information and confirm automotive-specific operating limits before releasing a production design.

🖥️

Powered Multi-Channel Speaker

The TAS5508APAG is well suited to powered speaker designs that need several digitally controlled amplifier outputs without distributing control across many discrete channels. A system controller can send synchronized digital audio data to the processor, which coordinates the eight-channel PWM interface at rates from 32 kHz to 192 kHz. This architecture supports compact powered speakers for home cinema, conference rooms, hospitality audio, and distributed installation systems. Because the TQFP device handles sensitive clock and data connections, the layout should minimize trace length, maintain continuous ground planes, and isolate the digital section from the amplifier power-conversion stage.

What is the TAS5508APAG?
The TAS5508APAG is an 8-channel digital audio PWM processor from Texas Instruments for coordinated control of multichannel power-amplifier stages. According to the manufacturer datasheet, the device supports sample rates from 32 kHz to 192 kHz and is packaged in a 64-pin TQFP measuring 10 x 10 mm. Its eight-channel integration is intended to simplify digital audio routing and PWM control compared with multiple discrete channel controllers.
How many audio channels does the TAS5508APAG support?
The TAS5508APAG supports 8 audio channels in a single 64-pin TQFP package. This channel count allows one digital audio processor to manage several Class-D power-amplifier channels in a home-theater receiver, professional mixer, powered speaker, or automotive audio system. The manufacturer identifies the part as an 8-channel digital audio PWM processor supporting sample rates from 32 kHz through 192 kHz.
What package does the TAS5508APAG use?
The TAS5508APAG uses a surface-mount 64-pin TQFP package measuring 10 x 10 mm. The manufacturer product listing identifies it as a 64-TQFP device, while the family documentation describes it as a digital audio PWM processor. Because the package contains 64 pins, the PCB footprint, exposed pad treatment, and pin assignment must be checked against the manufacturer pin-description table before layout release.
What sample rates are supported by the TAS5508APAG?
The TAS5508APAG supports digital audio sample rates from 32 kHz to 192 kHz. According to the manufacturer datasheet, this range accommodates conventional CD-rate audio as well as higher-rate multichannel and high-resolution digital audio streams. The connected DSP, codec, converter, and clock source must use mutually compatible rates and timing for the complete audio chain to operate correctly.
What can replace the TAS5508APAG?
The TAS5508CPAGR is identified as a complete replacement for the TAS5508APAG because its package, terminals, and principal performance characteristics are described as consistent. The TAS5508PAG is another same-family reference, but it does not include the A revision designation. Before substitution, compare pin functions, control registers, clock requirements, electrical limits, and software configuration against the current manufacturer datasheet.
Is TAS5508PAG a drop-in replacement for TAS5508APAG?
The TAS5508PAG uses the same 8-channel, 64-pin TQFP family architecture and is a plausible same-footprint replacement, but the A and non-A device revisions may differ in supported features or limits. Both retain 8 channels and a 10 x 10 mm package, representing a 0% change in channel count and package dimensions. Confirm every pin function and register difference before treating it as a true drop-in replacement.
When should I choose TAS5508APAG over TAS5508PAG?
Choose TAS5508APAG when the design specifically requires the A revision of the TAS5508 family and its documented revision-specific behavior. The two references share an 8-channel architecture and a 64-pin TQFP package, but revision identifiers alone do not guarantee identical register maps, protection behavior, or electrical characteristics. Use the manufacturer comparison information and your firmware requirements to make the final selection.
Is TAS5508APAG suitable for home theater and automotive audio?
The TAS5508APAG is suitable for multichannel home-theater and automotive audio systems when its electrical, timing, and environmental requirements match the installation. Its 8-channel organization supports 5.1-channel and 7.1-channel configurations, and the 32-192 kHz range covers several digital audio standards. Automotive qualification requirements must be checked separately because qualification status is not established by the product type alone.
Where can I download the TAS5508APAG datasheet PDF?
The TAS5508APAG datasheet PDF is available through the Texas Instruments data-manual link on this page. It is also indexed by document repositories under the same manufacturer part number. Use the manufacturer copy as the controlling reference for the pinout, electrical characteristics, register map, application circuit, and ordering information. Do not infer an unreported pin function from a distributor category description.
Where can I find the TAS5508APAG pinout?
The TAS5508APAG pinout is found in the pin-description section of the manufacturer datasheet, which covers the 64-pin TQFP package. Assign signals only after comparing that table with the selected board schematic and the alternative-device datasheet used for a possible revision change. The package’s 64 leads include power, ground, clock, data, control, and configuration functions, so a partial distributor pin list is not sufficient for PCB routing.
What is the difference between TAS5508APAG and TAS5508CPAGR?
The TAS5508APAG and TAS5508CPAGR belong to the same 8-channel digital audio PWM processor family and use the same 64-pin TQFP footprint. The cross-reference information describes the TAS5508CPAGR as a complete replacement whose terminals, package, and main performance characteristics are consistent with the TAS5508APAG. The principal difference is the device revision, so software and register compatibility should still be confirmed in the manufacturer documentation.
Is there a cross-brand drop-in equivalent for TAS5508APAG?
No verified cross-brand drop-in equivalent is identified for the TAS5508APAG. A suitable replacement must retain the 8-channel architecture, 64-pin TQFP footprint, pin functions, digital audio timing, and control interface rather than merely offering similar PWM processing. Use the manufacturer and distributor cross-reference resources to identify candidates, then compare them against the original datasheet before committing to a second-source design.
Where can I buy the TAS5508APAG and check current lead time?
Use the Request a Quote form on this page to ask about TAS5508APAG availability, current lead time, minimum order quantity, and tray quantities. The listing identifies the device as an 8-channel, 64-TQFP audio modulator, but a live stock count and manufacturing schedule should be confirmed for each order. This approach provides a current quotation tied to the exact suffix and shipping configuration.
How much does the TAS5508APAG cost?
Use the Request a Quote form on this page for the current TAS5508APAG unit price and volume breaks. Pricing for legacy integrated circuits can vary with quantity, lifecycle status, and supply position, so an archived catalog amount should not be treated as a current quotation. The exact tray suffix and required quantity should remain on the request to prevent mismatch during procurement.
What are the key specifications of TAS5508APAG that engineers should know?
The key TAS5508APAG specifications are 8 processed audio channels, a 32-192 kHz supported sample-rate range, and a surface-mount 64-pin TQFP package measuring 10 x 10 mm. According to the manufacturer datasheet, the device is a digital audio PWM processor intended for multichannel amplifier control. Exact supply limits, clocking details, register functions, and environmental ratings must be taken from the revision-specific datasheet.

נתוני עזר הנדסיים עבור TAS5508APAG — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the TAS5508APAG for a new multichannel digital audio design that specifically targets the A revision, an 8-channel PWM architecture, sample rates from 32 kHz to 192 kHz, and a 64-pin TQFP footprint. The TAS5508CPAGR is the preferred candidate when an existing board uses the same family architecture and its documented terminal and performance compatibility satisfies the product requirements. The TAS5508PAG is useful when the non-A revision meets the required feature set and register behavior. TAS5508APAGR provides the same A-device electrical configuration in a reel shipping format rather than a tray. No verified cross-brand drop-in equivalent is identified, so a second-source decision should require a complete pin, timing, electrical, and firmware comparison rather than reliance on category similarity alone.

השוואה עם חלופות

פרמטר מוצר זה TAS5508PAG TAS5508CPAGR TAS5508APAGR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package TQFP-64 (10 x 10 mm) TQFP-64 (10 x 10 mm) TQFP-64 (10 x 10 mm) TQFP-64 (10 x 10 mm)
Product Type 8-channel digital audio PWM processor 8-channel digital audio PWM processor 8-channel digital pulse-width modulator 8-channel digital audio PWM processor
Audio Channel Count 8 channels 8 channels 8 channels 8 channels
Supported Sample Rate 32 kHz to 192 kHz 32 kHz to 192 kHz 32 kHz to 192 kHz 32 kHz to 192 kHz
Pin Count 64 pins 64 pins 64 pins 64 pins
Shipping Configuration Tray Tray Tape and reel Tape and reel
Device Revision A Non-A designation C A
Cross-Reference Status Original device Same-family alternative Identified as a complete replacement Same-device reel shipping configuration

מבדילים עיקריים

  • Eight-channel integration in one package (לעומתTAS5504PAGR)
  • Confirmed same-family replacement path (לעומתTAS5508CPAGR)
  • No channel-count penalty against the non-A family device (לעומתTAS5508PAG)

הערות תכנון

Treat clock and digital audio data as high-speed signals even though the TAS5508APAG is not an RF device. Route these nets from the source DSP to the assigned TQFP pins with short traces, continuous reference planes, and no unnecessary stubs. Keep switching-node and high-current amplifier-supply paths physically separated from the digital section, particularly on a densely populated Class-D amplifier board.

Use separate, short supply and ground connections according to the manufacturer application circuit, with local high-frequency decoupling placed directly beside the relevant pins. A multichannel Class-D system can introduce substantial switching current even though the audio processor itself is not the power stage. Verify supply ripple, transient response, and return-current paths under full eight-channel operation rather than relying on a lightly loaded bench condition.

Do not substitute a family member solely because it has the same 64-pin TQFP footprint. Compare pin names, power requirements, clock polarity, supported sample rates, register maps, and reset behavior across the exact revision being replaced. The TAS5508CPAGR is described as a complete replacement, but production equivalence still requires review of the relevant manufacturer datasheets and any firmware configuration changes.

Confirm that the upstream DSP, audio interface, clock source, and power-amplifier stages support a common sample-rate and timing configuration across the 32-192 kHz operating range. Check clock jitter, data setup and hold margins, channel synchronization, and reset sequencing using the manufacturer timing diagrams. Simulation with realistic layer transitions and loading is recommended before a high-channel-count board is released.

Keep the 64-pin TQFP surrounded by an uninterrupted ground region and avoid placing thermally isolated audio traces beneath it. Although the processor is not a power MOSFET, system heat is often generated by adjacent Class-D output stages. Evaluate junction temperature using the actual board copper, enclosure airflow, nearby heat sources, and the package thermal data in the manufacturer documentation instead of assuming standard test-board cooling.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are stated in the product information. Confirm these attributes using the manufacturer’s current compliance documentation and the exact orderable suffix.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

TAS5508APAG datasheet TAS5508APAG pinout TAS5508APAG datasheet pdf TAS5508APAG specifications TAS5508APAG 64-TQFP pinout Texas Instruments TAS5508APAG TAS5508APAG equivalent TAS5508APAG replacement TAS5508APAG vs TAS5508CPAGR TAS5508APAG home theater amplifier TAS5508APAG automotive audio TAS5508APAG price TAS5508APAG stock

רכיבים ומונחים קשורים

Texas Instruments TAS5508APAG TAS5508PAG TAS5508CPAGR TAS5508APAGR TAS5028PAGR TAS5504PAGR digital audio PWM processor audio modulator pulse-width modulation Class-D audio amplifier digital signal processor multichannel audio system audio interface IC 32 kHz sample rate 192 kHz sample rate TQFP-64 10 x 10 mm package surface-mount package 5.1-channel audio 7.1-channel audio powered speaker clock integrity digital audio routing
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר