TDA7560H - 4x45W Quad BCD Power Amplifier | STMicroelectronics
料号： TDA7560H ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $8.5 | $8.50 |
| 10 | $7.65 | $76.50 |
| 100 | $6.8 | $680.00 |
| 500 | $6.12 | $3,060.00 |
| 1,000 | $5.44 | $5,440.00 |
TDA7560H 概述
A power amplifier is an electronic device that increases the amplitude of an audio signal to drive speakers. In automotive audio systems, power amplifiers are essential for delivering sufficient volume and clarity. The TDA7560H belongs to the class of analog audio power amplifiers, specifically the BCD technology family, which integrates bipolar, CMOS, and DMOS transistors on a single chip. This technology enables high output power, low distortion, and efficient thermal management.
Key features of the TDA7560H include a maximum output power of 45W per channel (at 14.4V, 4Ω, 10% THD), a signal-to-noise ratio of 90dB, and a wide supply voltage range of 8V to 18V. It also offers a standby and mute function for power management, and a full set of protection features including DC offset detection, overvoltage, undervoltage, short-circuit, and thermal shutdown. The device is designed for high reliability in automotive environments, with an operating temperature range of -40°C to +105°C.
The TDA7560H uses a BCD process that combines the best of bipolar (high precision), CMOS (low power), and DMOS (high voltage/current) technologies. This architecture allows for efficient power delivery with low quiescent current and minimal distortion. The amplifier's output stage is configured as a complementary push-pull pair, providing high current capability and low crossover distortion. The device also includes a diagnostic pin for fault detection, which is crucial for automotive safety systems.
Typical applications for the TDA7560H include car radio head units, external automotive amplifiers, and other in-vehicle audio systems. Its high output power and flexible configuration make it suitable for driving multiple speakers, including subwoofers and full-range speakers. The device is also used in marine and off-road vehicle audio systems where robust performance is required.
When designing with the TDA7560H, it is important to ensure adequate heat sinking, as the device can dissipate significant power at high output levels. The exposed metal tab should be connected to a large copper area on the PCB to improve thermal performance. Additionally, proper decoupling capacitors should be placed close to the supply pins to minimize voltage ripple and ensure stable operation.
直接替换替代料： TDA7560H ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： TDA7560H （相同外形与封装尺寸） ——差异在于 Package, Output Power, Supply Voltage Range, Protection Features, Standby Current.
快速对比工具——选择替代料号进行并排对比：
TDA7563A
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
TDA7560H 最大额定值与电气特性
| Output Power (4x45W) | 45W per channel at 14.4V, 4Ω, 10% THD |
| Output Power (3x45W+2x68W) | 45W x3 + 68W x2 at 14.4V, 4Ω, 10% THD |
| Output Power (2x45W+2x68W) | 45W x2 + 68W x2 at 14.4V, 4Ω, 10% THD |
| Supply Voltage Range | 8V to 18V |
| Signal-to-Noise Ratio | 90dB |
| Total Harmonic Distortion | 0.02% at 1kHz, 1W, 4Ω |
| 静态电流 | 120mA |
| Standby Current | 1uA |
| 工作温度范围 | -40°C to +105°C |
| 封装 | Flexiwatt27 (H) |
| 安装类型 | Surface Mount |
| Number of Channels | 4 |
| 输出配置 | Quad BCD power amplifier |
| Protection Features | DC offset, overvoltage, undervoltage, short-circuit, thermal shutdown |
| RoHS 状态 | Compliant |
TDA7560H 引脚配置
| 引脚 1 | OUT1 — Output channel 1 |
| 引脚 2 | GND — Ground |
| 引脚 3 | OUT2 — Output channel 2 |
| 引脚 4 | VS — Supply voltage |
| 引脚 5 | OUT3 — Output channel 3 |
| 引脚 6 | GND — Ground |
| 引脚 7 | OUT4 — Output channel 4 |
| 引脚 8 | STBY — Standby control |
| 引脚 9 | MUTE — Mute control |
| 引脚 10 | IN1 — Input channel 1 |
| 引脚 11 | IN2 — Input channel 2 |
| 引脚 12 | IN3 — Input channel 3 |
| 引脚 13 | IN4 — Input channel 4 |
| 引脚 14 | DIAG — Diagnostic output |
典型应用
TDA7560H 适用于 6 应用s: Car Radio Head Units, External Automotive Amplifiers, Marine Audio Systems, Off-Road Vehicle Audio, Home Theater Systems, Powered Speakers.
Car Radio Head Units
The TDA7560H is widely used in car radio head units to drive four speakers with up to 45W per channel. Its high output power and low distortion ensure clear audio reproduction even at high volumes. The device's flexible configuration allows it to drive a subwoofer in addition to full-range speakers, providing a complete audio solution. The wide supply voltage range (8V to 18V) accommodates automotive electrical system variations, and the protection features safeguard the amplifier against faults such as short circuits and overvoltage.
推荐
External Automotive Amplifiers
In external automotive amplifiers, the TDA7560H is used to boost audio signals from head units to drive aftermarket speakers. Its high output power (45W per channel) and low THD (0.02%) make it ideal for high-fidelity sound systems. The device's BCD technology ensures efficient power conversion and minimal heat generation, which is critical in confined spaces. The standby and mute functions allow for power management, reducing battery drain when the amplifier is not in use. The diagnostic pin provides fault detection, enabling system-level monitoring.
推荐
Marine Audio Systems
The TDA7560H is suitable for marine audio systems due to its robust protection features and wide operating temperature range (-40°C to +105°C). It can drive multiple speakers in boats and yachts, providing high-quality audio in harsh environments. The device's short-circuit and thermal shutdown protections prevent damage from moisture-induced faults. The Flexiwatt27 (H) package with exposed metal tab allows for efficient heat dissipation, which is essential in enclosed marine compartments.
推荐
Off-Road Vehicle Audio
Off-road vehicles require audio systems that can withstand vibration, temperature extremes, and voltage fluctuations. The TDA7560H's wide supply voltage range and protection features make it ideal for such applications. It can deliver up to 45W per channel, ensuring clear audio even with engine noise. The device's low quiescent current (120mA) helps conserve battery power, which is critical in off-road situations where charging may be limited.
推荐
Home Theater Systems
Although designed for automotive use, the TDA7560H can be used in home theater systems to drive multiple speakers. Its high output power and low distortion make it suitable for surround sound applications. The device's flexible configuration allows it to drive a center channel and subwoofer in addition to front and rear speakers. The wide supply voltage range enables operation from various power supplies, and the protection features ensure reliable operation in consumer electronics.
推荐
Powered Speakers
The TDA7560H is used in powered speakers to amplify audio signals from a preamplifier. Its high output power and low THD ensure accurate sound reproduction. The device's BCD technology provides efficient power conversion, reducing heat generation and improving reliability. The standby and mute functions allow for power management, and the diagnostic pin enables fault detection. The Flexiwatt27 (H) package is suitable for compact speaker designs.
推荐
推荐产品汇总
工程参考数据： TDA7560H ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | TDA7560 | TDA7563A | TDA7850 | TDA7388 |
|---|---|---|---|---|---|
| Package | Flexiwatt27 (H) | Flexiwatt25 | Flexiwatt27 (H) | Flexiwatt27 (H) | Flexiwatt27 (H) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Output Power (4Ω, 14.4V, 10% THD) | 45W x4 | 45W x4 | 45W x4 | 50W x4 | 40W x4 |
| Supply Voltage Range | 8V to 18V | 8V to 18V | 8V to 18V | 8V to 18V | 8V to 18V |
| Signal-to-Noise Ratio | 90dB | 90dB | 90dB | 90dB | 90dB |
| Total Harmonic Distortion | 0.02% | 0.02% | 0.02% | 0.02% | 0.02% |
| Quiescent Current | 120mA | 120mA | 120mA | 120mA | 120mA |
| Protection Features | DC offset, overvoltage, undervoltage, short-circuit, thermal shutdown | Same | Same | Same | Same |
关键差异点
- Higher output power than TDA7388 （对比 TDA7388)
- Same package as TDA7850 but lower power （对比 TDA7850)
- Flexiwatt27 (H) package with exposed tab （对比 TDA7560)
设计说明
The TDA7560H can dissipate significant power at high output levels. For example, at 45W per channel into 4Ω, the power dissipation can exceed 20W. The exposed metal tab must be connected to a large copper area on the PCB, and a heat sink with a thermal resistance of less than 5°C/W is recommended for continuous operation. Ensure adequate airflow in the enclosure to prevent thermal shutdown.
Place decoupling capacitors (100nF ceramic and 1000uF electrolytic) close to the VS pin to minimize voltage ripple and ensure stable operation. The ground pins should be connected to a solid ground plane to reduce noise and improve thermal performance. Keep input signal traces short and shielded to avoid interference.
Do not operate the TDA7560H without a load connected to the outputs, as this can cause oscillation and damage the device. Ensure the standby and mute pins are properly controlled to avoid pop noise during power-up and power-down. The diagnostic pin should be monitored by the microcontroller to detect faults such as short circuits or overvoltage.
合规信息
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified as it is not a digital IC.
