Texas Instruments

THS5661IPW - 12-Bit 100-MSPS CommsDAC | Texas Instruments

料号: THS5661IPW ✓ 量产中
TSSOP (PDSO28) Package
最小起订量: 1 |

THS5661IPW 概述

The Texas Instruments THS5661IPW is a 12-bit, 100-MSPS single-channel digital-to-analog converter in a 28-pin TSSOP package. It is a CommsDAC-family converter designed for parallel digital input and high-speed analog output generation. The device provides a 0.035 µs settling time and an industrial temperature grade, making it suitable for communications, instrumentation, and signal-generation systems requiring a compact, high-speed DAC.

A digital-to-analog converter, or DAC, is a semiconductor that translates a digital code into a proportional analog voltage or current. Within the broader ADC/DAC hierarchy, the THS5661IPW belongs to the Communications DAC family. Its 12-bit resolution provides 4096 digital codes, while its 100-MSPS update rate supports rapidly changing output waveforms when paired with a suitable clock and reconstruction network.

The main performance characteristics are its 12-bit resolution, 100-MSPS maximum update rate, single-converter architecture, 0.035 µs settling time, parallel word input, and 28-pin TSSOP construction. These features make the part appropriate for communication signal generation, waveform synthesis, test benches, digital control systems, and embedded analog-output interfaces. The small TSSOP outline also supports compact board layouts where maintaining adequate trace and thermal geometry remains important.

The THS5661IPW uses parallel digital data input rather than a serial interface, so system designers must account for routing multiple data bits, clock timing, and input setup or hold requirements around the converter. Its analog output requires a suitable output network for the target impedance and frequency. The datasheet establishes the device as a single-function converter with a 0.035 µs settling time, supporting designs in which output accuracy must recover rapidly after a digital input change.

Typical applications include communications test equipment, digital waveform generation, industrial monitoring and control, embedded signal synthesis, and laboratory instrumentation. In each case, the 100-MSPS update rate permits new output values to be generated at high frequency, while the 12-bit code width balances output resolution against interface complexity. Parallel routing should be kept short and properly terminated to preserve data integrity at the highest supported rates.

A critical layout consideration is keeping the parallel data, clock, analog output, supply, and decoupling connections short. Place power-supply bypass capacitors close to their associated pins and maintain a continuous ground reference around the device. Review the manufacturer's pin-description table and recommended application circuit before assigning tracks or selecting the external reconstruction and output-impedance network.

This page consolidates the exact THS5661IPW identification, package information, update rate, resolution, and settling time into an engineering-focused selection guide. It also distinguishes the verified THS5661A family relationship from a true drop-in replacement and provides practical sourcing, layout, and application guidance for high-speed DAC designs.

直接替换替代料: THS5661IPW ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

THS5661AIPW

✅ 直接替换
📦 28-pin TSSOP (PDSO28)
Maximum update rate is 125 MSPS versus 100 MSPS, a 25% increase; the manufacturer states that the family uses identical interface options, package size, and pinout.

📋 参考替代料(不在目录中)

THS5661IPW 最大额定值与电气特性

Converter Type 12-bit digital-to-analog converter
分辨率 12 bits
Number of Channels 1 channel
Maximum Update Rate 100 MSPS
Settling Time 0.035 µs
接口类型 Parallel word input
Product Family CommsDAC
Number of Terminals 28 terminals
Package Code TSSOP (PDSO28)
Package Shape Gull wing
Temperature Grade Industrial

THS5661IPW gull wing 引脚配置指南

THS5661IPW(gull wing 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

THS5661IPW 的 gull wing 封装引脚图

暂无详细引脚数据: THS5661IPW.

请参阅 数据手册 以查看完整引脚配置。

典型应用

THS5661IPW 适用于 6 应用s: Communications Signal Generation, Digital Waveform Synthesis, Industrial Monitoring and Control, Test and Measurement Instrumentation, Embedded Signal Synthesis, Digital Control Interfaces.

🌐

Communications Signal Generation

The THS5661IPW fits communications signal-generation blocks that require a new analog output value at up to 100 MSPS. Its 12-bit resolution provides 4,096 code levels, while the stated 0.035 µs settling time supports rapid analog transitions after each digital update. Place the parallel data and update clock close to the device, then use the manufacturer reference network and output-impedance guidance to develop the communications waveform. The principal design check is that the external reconstruction and output stages preserve the intended bandwidth without adding excessive distortion.

🔧

Digital Waveform Synthesis

The THS5661IPW can convert parallel digital waveform samples into an analog test or control signal at rates up to 100 MSPS. Its 12-bit code width supports a 4,096-level command and waveform representation, while the 0.035 µs settling time allows the output to recover rapidly after a new code is applied. Place the DAC beside the digital source, keep clock and data routes short, and account for the external reconstruction network. Confirm output range and bandwidth against the specific signal shape rather than assuming that sample rate alone defines waveform fidelity.

🏭

Industrial Monitoring and Control

The THS5661IPW is suitable for industrial control systems that convert a digitally calculated command into an analog test, excitation, or adjustment signal. Its 100-MSPS update rate provides substantially more timing margin than a slow control DAC, while 12-bit resolution defines 4,096 available code levels. The industrial temperature grade supports use in demanding equipment. Design the analog path to match the required load impedance and signal amplitude, and use short supply and ground connections so switching and control circuitry do not degrade the command signal.

📺

Test and Measurement Instrumentation

The THS5661IPW can serve as the output stage of a bench or embedded test instrument that produces programmable analog waveforms from parallel digital samples. At up to 100 MSPS, it accommodates fast test sequences, and its 0.035 µs settling time supports repeated code changes. Route the parallel bus and clock with matched timing discipline, terminate outputs according to the manufacturer recommendations, and verify the complete output path with the intended instrument. The converter should be paired with a suitable output amplifier when the test load requires greater current or voltage range.

🧩

Embedded Signal Synthesis

The THS5661IPW can convert algorithmically generated parallel samples into an analog excitation for embedded control and signal-processing systems. Its 12-bit resolution offers a practical balance between code granularity and bus width, while the 100-MSPS rate supports rapidly varying outputs. Keep the data source and converter on the same digital clock domain, minimize trace skew, and follow the datasheet grounding and decoupling layout. Check the external output network for the intended sensor, actuator, or analog-processing input before finalizing component values.

🔧

Digital Control Interfaces

The THS5661IPW is useful when a digital controller must generate a proportional analog command for an external plant or interface. The 12-bit code provides 4,096 discrete levels, and the 100-MSPS capability allows rapid command updates for control-loop experiments. Keep the digital interface clean, provide local supply bypassing, and establish a low-impedance return path for the analog output. Before deployment, verify the converter's exact output range and reference requirements against the controlled subsystem so the generated command remains within safe operating limits.

推荐产品汇总

THS5661IPW Texas Instruments 用于: Communications Signal Generation, Digital Waveform Synthesis, Industrial Monitoring and Control, Test and Measurement Instrumentation, Embedded Signal Synthesis, Digital Control Interfaces THS5661AIPW Related 12-bit, 125-MSPS CommsDAC family member 用于: Communications Signal Generation, Digital Waveform Synthesis, Industrial Monitoring and Control, Test and Measurement Instrumentation, Embedded Signal Synthesis, Digital Control Interfaces
What is the THS5661IPW?
The THS5661IPW is a single-channel, 12-bit digital-to-analog converter from Texas Instruments that supports update rates up to 100 MSPS. According to the manufacturer datasheet, it uses a parallel word input and provides a 0.035 µs settling time. The converter is housed in a 28-terminal gull-wing TSSOP package designated PDSO28, and its industrial temperature grade supports communications and industrial signal-generation equipment.
What is the resolution and update rate of THS5661IPW?
The THS5661IPW provides 12-bit resolution and operates at up to 100 MSPS. A 12-bit converter divides the output range into 4,096 digital codes, while the 100-MSPS rate permits a new output value to be requested every 10 ns. According to the manufacturer datasheet, its stated 0.035 µs settling time supports high-speed output updates where the analog signal must settle rapidly after each digital transition.
What interface does THS5661IPW use?
The THS5661IPW uses a parallel word input interface rather than a serial DAC interface. This arrangement presents the digital code across multiple data pins and requires coordinated routing of the input word and update clock. According to the manufacturer datasheet, the device is a single-function converter with a 0.035 µs settling time. PCB layout should minimize data-trace skew and keep the clock and data paths away from sensitive analog output routing.
Where can I download the THS5661IPW datasheet PDF?
The THS5661IPW datasheet PDF can be accessed through the linked Texas Instruments document index, which identifies the part as a 12-bit, 100-MSPS CommsDAC digital-to-analog converter. Use the manufacturer pin-description table and application circuit when planning the PCB. The exact pin names, supply limits, timing values, and output electrical characteristics should be taken from the manufacturer datasheet rather than inferred from the distributor summary.
Where is the THS5661IPW pinout?
The THS5661IPW pinout is documented in the manufacturer datasheet for the 28-terminal PDSO28 gull-wing package. Its publicly identified package has 28 terminals, but individual signal names are not present in the product listing used for this page. Consult the datasheet pin-description table and package drawing before assigning every track. Pay particular attention to data, clock, supply, ground, and analog-output connections.
Where can I buy THS5661IPW online?
You can request a quote for THS5661IPW through the Request a Quote form on this XAIPART page. The part is identified as a Texas Instruments 12-bit, 100-MSPS CommsDAC in a 28-pin TSSOP package. For an assembly-ready design, provide the required quantity, date code preference, and delivery destination with the request so procurement can confirm allocation and lead time.
What is the price of THS5661IPW?
The THS5661IPW is offered through the Request a Quote form on this page, where the current commercial terms can be confirmed for the required quantity and delivery schedule. Pricing for this Texas Instruments converter can change with availability, volume, and date-code requirements. The product is a 12-bit, 100-MSPS single-channel DAC in a 28-pin TSSOP package, so the MPN should be stated exactly when requesting an allocation.
What is the lead time for THS5661IPW?
Current lead time for THS5661IPW should be confirmed through the Request a Quote form on this page. The listing identifies the component as a 12-bit, 100-MSPS CommsDAC with a 0.035 µs settling time in an industrial-grade 28-pin TSSOP package. Include your required quantity, production schedule, and acceptable date-code policy when requesting the quotation so the supply commitment reflects the actual build plan.
Is THS5661IPW in stock?
Stock and allocation for THS5661IPW should be confirmed through the Request a Quote form on this page. The component is a Texas Instruments 12-bit, 100-MSPS single-channel digital-to-analog converter in a 28-terminal TSSOP package. A stock response is most useful when it includes the requested quantity, date-code tolerance, and delivery destination rather than only indicating that a quantity is present.
THS5661IPW vs THS5661AIPW - which is better for a 100 MSPS design?
Choose THS5661IPW when the design specifically targets its 100-MSPS update rate, while considering THS5661AIPW when the related family supports up to 125 MSPS. Texas Instruments describes the CommsDAC family as sharing interface options, package, and pinout, but the listed THS5661A also supports 3 V to 5.5 V supplies. Confirm every electrical limit and timing value in the selected datasheet before treating it as a substitution.
What is the difference between THS5661IPW and THS5661AIPW?
THS5661IPW is identified as a 12-bit, 100-MSPS CommsDAC, whereas THS5661AIPW is identified as the newer 12-bit, 125-MSPS member of the same family. Texas Instruments states that the CommsDAC family offers identical interface options, package size, and pinout across its supported resolutions. The update-rate increase is 25%, but analog performance, supply conditions, timing, and lifecycle details still require direct comparison before release.
When should I choose THS5661IPW over THS5661AIPW?
Choose THS5661IPW when its specified 100-MSPS rate satisfies the signal path and the design is qualified around the original THS5661 device. Consider THS5661AIPW when the 125-MSPS capability provides useful timing margin or matches a preferred family revision. Because both devices are described as sharing the CommsDAC interface and pinout, confirm supply range, settling behavior, accuracy, and lifecycle status in the corresponding manufacturer documentation.
Is THS5661IPW suitable for communications signal generation?
Yes, THS5661IPW is appropriate for communications signal generation because it is a CommsDAC with 12-bit resolution, a 100-MSPS update rate, and a 0.035 µs settling time. Its parallel input supports direct connection to suitable digital logic. Clock distribution, data timing, output reconstruction, and output impedance must still be engineered to preserve the required signal bandwidth and waveform accuracy.
What can replace THS5661IPW?
THS5661AIPW is the closest documented family candidate because Texas Instruments states that CommsDAC devices offer identical interface options, package dimensions, and pinout. It supports up to 125 MSPS versus the THS5661IPW's 100 MSPS. A substitution should still pass a full review of supply voltage, clock timing, output range, settling behavior, accuracy, and board-level constraints before being approved as a drop-in replacement.
What are the key specifications of THS5661IPW that engineers should know?
The key THS5661IPW specifications are 12-bit resolution, one DAC channel, a maximum update rate of 100 MSPS, a 0.035 µs settling time, and a parallel word input. The device uses a 28-terminal gull-wing TSSOP package designated PDSO28 and is offered in an industrial temperature grade. These specifications make it particularly relevant to communications waveform generation, test equipment, and embedded high-speed analog-output systems.

工程参考数据: THS5661IPW ——对比、设计指导和合规信息。

选型指南

Choose THS5661IPW when the design is qualified around a 12-bit, 100-MSPS CommsDAC with a 0.035 µs settling time and a parallel word input. Consider THS5661AIPW when the additional update-rate margin is useful or when the associated family revision has been validated for the supply, reference, timing, and output requirements. The documented family relationship makes it the closest candidate for footprint reuse, but its 125-MSPS rate is 25% above the target's 100-MSPS specification. For a new design, compare both devices across settling behavior, output range, accuracy, power, and lifecycle rather than assuming that identical pinout guarantees identical performance. For an existing THS5661IPW board, preserve the original device unless a complete electrical review and board-level qualification approve the family alternative.

与替代料对比

参数 本产品 THS5661AIPW
Brand Texas Instruments Texas Instruments
Package 28-pin TSSOP (PDSO28) 28-pin TSSOP (PDSO28) - same package and pinout family
Resolution 12 bits 12 bits
Maximum Update Rate 100 MSPS 125 MSPS
Interface Parallel word input Parallel word input
Product Family CommsDAC CommsDAC

关键差异点

  • Matches the original 100-MSPS design target (对比 THS5661AIPW)
  • Uses a compact 28-terminal TSSOP interface (对比 THS5661AIPW)
  • Provides 12-bit command granularity (对比 THS5661AIPW)

设计说明

Route the parallel data inputs and update clock as a compact, matched digital interface. Maintain consistent trace geometry where practical to reduce data skew, especially when the converter is operated near its 100-MSPS update-rate limit. Keep the clock away from the analog output and sensitive reference paths, and place decoupling components close to their associated supply pins. Follow the manufacturer pin-description table and recommended application circuit when assigning every connection.

Treat the digital interface, reference, and analog output as three coupled signal paths. Use a low-impedance ground plane, provide local bypass capacitance, and keep the reconstruction network and output-routing geometry compact. Because the converter uses parallel word input, setup timing, hold timing, and clock quality must be evaluated at the device pins. Review the exact output amplitude, reference requirements, and permitted load in the manufacturer datasheet before finalizing the external network.

Do not approve THS5661AIPW as a substitution solely because the CommsDAC family shares a package and pinout. Its listed maximum update rate is 125 MSPS rather than 100 MSPS, and its stated 3 V to 5.5 V supply range must satisfy the original design. Compare timing, output range, settling behavior, accuracy, reference voltage, and lifecycle status from the corresponding manufacturer documents before releasing the alternative into production.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were included in the product information for THS5661IPW. AEC-Q100 is not applicable because this is a communications DAC rather than an automotive-qualified device.

数据核验日期: 2026-11-20 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

THS5661IPW THS5661IPW datasheet THS5661IPW datasheet pdf THS5661IPW pinout THS5661IPW specifications THS5661IPW 100 MSPS DAC THS5661IPW TSSOP-28 THS5661IPW equivalent THS5661IPW replacement THS5661IPW vs THS5661AIPW THS5661IPW price THS5661IPW stock Texas Instruments THS5661IPW THS5661IPW application circuit THS5661IPW communications signal generator

相关元器件 & 术语

Texas Instruments THS5661IPW THS5661AIPW CommsDAC digital-to-analog converter DAC ADC/DAC semiconductor 12-bit resolution 100 MSPS 125 MSPS 0.035 µs settling time parallel word input 28-pin TSSOP PDSO28 TSSOP package family surface mount industrial temperature grade communications signal generation waveform synthesis test and measurement instrumentation industrial control digital signal processing parallel data bus analog output
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情