最后一次采购通知: TJA1050T/VM 即将停产。最后下单日期: 联系我们. 查看可用的替代料号 →
NXP Semiconductors

TJA1050T/VM - 1 Mbaud High-Speed CAN Transceiver | NXP

料号: TJA1050T/VM ✗ 停产
4.75 V to 5.25 V Vdss 8-pin SOIC Package
最小起订量: 1 |

TJA1050T/VM 概述

NXP TJA1050T/VM is a high-speed CAN bus transceiver with differential transmit and receive capability, support for signals up to 1 Mbaud, and operation from a 4.75 V to 5.25 V supply in an 8-pin SOIC package. It provides the physical-layer interface between a CAN protocol controller and a two-wire CAN network.

A CAN transceiver, also called a CAN physical-layer interface, converts logic-level signals from a CAN controller into differential bus signals and converts received bus levels back into controller-compatible receive data. In the signal-chain hierarchy, the TJA1050 belongs to the CAN transceiver class, within interface ICs and broader semiconductor communications components. It supports the classic high-speed CAN physical layer used in automotive, industrial, and embedded control networks.

The principal device characteristics are a maximum signaling rate of 1 Mbaud, a 4.75 V to 5.25 V operating supply range, differential CANH and CANL bus connections, and an 8-pin SOIC package. The interface also includes a receive output, a transmit-data input, a silent-mode control input, and a VREF output for external bus-receiver biasing. These functions allow a CAN controller and physical bus to share a compact, application-specific interface.

In operation, the transmitter drives the CANH and CANL conductors differentially, while the receiver detects the dominant and recessive states presented on the bus. The silent-mode input can inhibit the transmitter when the controller is not actively participating in communication. The VREF pin provides a reference voltage for an optional split termination network, while CANH and CANL require the termination strategy appropriate for the complete CAN topology.

Typical applications include automotive body and powertrain control modules, industrial automation equipment, elevator controllers, building-control systems, robotics, and embedded CAN gateways. The TJA1050T/VM is especially suitable for legacy high-speed CAN systems requiring a conventional 5 V transceiver rather than a 3.3 V or CAN FD interface.

PCB implementation requires careful attention to the CAN bus pair, termination, grounding, and decoupling. Place the supply capacitor close to VCC, route CANH and CANL as a closely coupled differential pair, avoid discontinuities between transceiver and bus connector, and follow the termination guidance in the NXP TJA1050 datasheet for the selected topology.

This product page consolidates the TJA1050T/VM operating identity, lifecycle information, same-package alternatives, pin assignment, and practical interface-design guidance. It is intended to support legacy-product maintenance and informed migration planning while distinguishing genuine drop-in options from newer CAN transceivers that require different logic levels or pin assignments.

直接替换替代料: TJA1050T/VM ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

TJA1050T/H/V,118

✅ 直接替换
📦 SOIC-8 (8-SO)
Same TJA1050 family and SOIC-8 footprint; ordering-temperature and qualification coding differ by up to the suffix-defined limit

📋 参考替代料(不在目录中)

TJA1050T/CM,118

✅ 直接替换
📦 SOIC-8 (8-SO)
Same TJA1050 interface and SOIC-8 footprint; CM ordering code has a different suffix-defined temperature or qualification range

📋 参考替代料(不在目录中)

TJA1057T,118

✅ 直接替换
📦 SOIC-8 (8-SO)
Same 8-pin high-speed CAN class and 1 Mbaud application class, but TXD timeout and bus-fault behavior differ between generations

📋 参考替代料(不在目录中)

TJA1021T/3

✅ 直接替换
📦 SOIC-8 (8-SO)
Same 8-pin legacy high-speed CAN footprint and 1 Mbaud class, while silent-mode and fault-handling characteristics differ

📋 参考替代料(不在目录中)

TJA1050T/VM 规格参数

Product Type High-speed CAN transceiver
Maximum Data Rate 1 Mbaud
Supply Voltage Range 4.75 V to 5.25 V
引脚数 8 pins
封装 8-pin SOIC
安装类型 Surface mount
CAN Interface Differential CANH and CANL
Transmitter Input TXD logic input
Receiver Output RXD logic output
Silent-Mode Control S input
Reference Output VREF output
RoHS 状态 Unknown
REACH Status Unknown
AEC-Q100 Qualification Unknown

TJA1050T/VM 引脚配置

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
引脚 1 TXD — Transmit data input from the CAN controller
引脚 2 GND — Ground connection
引脚 3 S — Silent-mode input used to control transmitter operation
引脚 4 RXD — Receive data output to the CAN controller
引脚 5 VREF — Reference voltage output for the applicable termination arrangement
引脚 6 CANH — CAN high-side bus connection
引脚 7 CANL — CAN low-side bus connection
引脚 8 VCC — Positive supply connection

典型应用

TJA1050T/VM 适用于 6 应用s: Automotive Body Control Modules, Industrial Automation Equipment, Elevator and Building Control, Robotics and Embedded Control, CAN Bus Test and Measurement Equipment, Legacy Equipment Maintenance.

🚗

Automotive Body Control Modules

The TJA1050T/VM provides the physical layer between a CAN controller and vehicle body networks, with differential CANH and CANL signaling up to 1 Mbaud. Its 8-pin SOIC format supports compact control-module layouts, while TXD, RXD, and S provide the basic controller interface and transmitter-inhibit control. The 4.75 V to 5.25 V operating range suits established 5 V automotive electronics. For an existing module, the legacy footprint can simplify repair and stock-continuity work. The PCB must preserve the bus pair, provide suitable termination, and decouple VCC close to the device.

🏭

Industrial Automation Equipment

The TJA1050T/VM suits industrial controllers, motor-control modules, remote I/O, and production equipment that use classic high-speed CAN. Its differential CAN interface reduces susceptibility to common-mode industrial noise, while the 1 Mbaud capability supports demanding control traffic. The interface uses TXD and RXD to connect to a protocol controller and provides S for silent operation during controller resets or maintenance. The small 8-pin SOIC package fits densely populated control boards. Layout should keep CANH and CANL tightly coupled, route them away from switching nodes, and follow the bus termination guidance in the NXP datasheet.

🏢

Elevator and Building Control

The TJA1050T/VM can connect elevator controllers, door systems, and building-management nodes using a two-wire CAN bus. Its differential transmitter and receiver support communication between distributed nodes over distances typical of industrial building networks. The 1 Mbaud rate provides ample bandwidth for status, commands, and diagnostic traffic, while the compact SOIC-8 package simplifies retrofitting legacy controller boards. RXD and TXD connect to the CAN controller, S can inhibit transmission, and VREF supports the applicable split-termination arrangement. Existing installations benefit from same-package maintenance options, subject to electrical and lifecycle verification.

🤖

Robotics and Embedded Control

The TJA1050T/VM is suitable for robot controllers, actuator hubs, sensor gateways, and embedded systems that retain a 5 V classic CAN interface. A 1 Mbaud physical layer allows controllers and distributed I/O to exchange real-time commands and diagnostics without introducing CAN FD hardware. The 8-pin SOIC footprint can be assembled into an existing controller layout without a package conversion. Designers should account for the transceiver's 5 V operating range and verify controller logic levels, bus termination, grounding, and fault behavior. The CANH and CANL tracks should behave as a controlled differential pair from the transceiver to the bus connector.

🔧

CAN Bus Test and Measurement Equipment

The TJA1050T/VM can form the bus-facing section of a diagnostic adapter, protocol analyzer, or CAN interface card. Its 1 Mbaud capability covers classic high-speed CAN test traffic, and the differentiated receiver provides the physical-layer signal required by a controller or monitoring logic. The compact package allows multiple channels to be placed on an instrument board, while S offers a way to silence the transmitter when required by the test system. Accurate measurements depend on careful reference-ground design, low-noise supply decoupling, controlled bus-pair geometry, and termination appropriate to the analyzer connection.

🔧

Legacy Equipment Maintenance

The TJA1050T/VM is especially useful for repairing or extending equipment whose original CAN controller expects a 5 V, 8-pin high-speed transceiver. The established SOIC-8 footprint can facilitate a maintenance replacement after the original component becomes difficult to procure. Because the NXP product page marks the TJA1050 family as end of life, engineers should verify stock, lifecycle risk, and any suffix-specific temperature or qualification requirements. A replacement should not be selected solely by package shape: TXD, RXD, S, VREF, supply voltage, bus thresholds, and fault behavior must match the original circuit.

推荐产品汇总

TJA1050T/H/V,118 Same-family TJA1050 ordering variant 用于: Automotive Body Control Modules, Elevator and Building Control, CAN Bus Test and Measurement Equipment, Legacy Equipment Maintenance TJA1057T,118 Related legacy high-speed CAN transceiver 用于: Automotive Body Control Modules, Elevator and Building Control, CAN Bus Test and Measurement Equipment TJA1021T/3 Related 8-pin legacy CAN transceiver 用于: Industrial Automation Equipment, Robotics and Embedded Control, Legacy Equipment Maintenance TJA1050T/CM,118 Same-family TJA1050 ordering variant 用于: Industrial Automation Equipment, Robotics and Embedded Control, Legacy Equipment Maintenance
What is the TJA1050T/VM and what is its maximum data rate?
The TJA1050T/VM is an 8-pin high-speed CAN transceiver from NXP that supports signaling rates up to 1 Mbaud. It interfaces a CAN protocol controller with a two-wire differential bus. According to the NXP TJA1050 product information and manufacturer datasheet, the device is intended for automotive and industrial CAN networks operating from a 4.75 V to 5.25 V supply.
What is the operating voltage of TJA1050T/VM?
The TJA1050T/VM operates from 4.75 V to 5.25 V. This 5 V interface supports classic high-speed CAN physical-layer designs that use a compatible CAN controller. The NXP TJA1050 product page and manufacturer datasheet identify the device as a high-speed CAN transceiver for automotive and industrial two-wire CAN networks.
Where can I download the TJA1050T/VM datasheet PDF?
The official TJA1050T/VM datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/TJA1050.pdf. The document covers the TJA1050 family and provides the electrical characteristics, application information, pin description, and operating recommendations for the 8-pin CAN transceiver. Use the ordering-information section to confirm the TJA1050T/VM suffix.
Where is the TJA1050T/VM pinout located?
The TJA1050T/VM pinout appears in the pin-description section of the NXP TJA1050 manufacturer datasheet. The 8-pin SOIC interface assigns TXD to pin 1, GND to pin 2, S to pin 3, RXD to pin 4, VREF to pin 5, CANH to pin 6, CANL to pin 7, and VCC to pin 8. The page diagram uses the same counter-clockwise numbering convention as the SOIC package.
What can replace TJA1050T/VM as a pin-compatible part?
TJA1050T/VM can be replaced by compatible TJA1050-family ordering variants and by carefully verified legacy 8-pin CAN transceivers such as TJA1057T,118 when their electrical limits and pin functions match the original design. The NXP TJA1050 and TJA1057 manufacturer documentation should be compared against the original schematic before substitution. Newer CAN FD or 3.3 V transceivers are not automatically drop-in replacements.
Is TJA1050T/VM the same as TJA1057T,118?
The TJA1050T/VM and TJA1057T,118 are closely related legacy high-speed CAN transceiver options in an 8-pin SOIC package, but they are not identical in every operating characteristic. The NXP manufacturer datasheets should be checked for receiver thresholds, bus fault behavior, TXD timeout behavior, and operating-temperature limits. Choose TJA1057 only when its published characteristics satisfy the existing board and CAN network requirements.
TJA1050T/VM vs TJA1021T/3 — which is better for an existing CAN board?
The TJA1021T/3 is generally considered when a newer legacy high-speed CAN transceiver offers improved bus-fault behavior or silent-mode control, but an existing PCB must be checked pin by pin. The TJA1050T/VM has TXD, GND, S, RXD, VREF, CANH, CANL, and VCC assignments in its 8-pin SOIC package. The TJA1021T/3 should be used only after its manufacturer pin description and electrical limits confirm compatibility.
When should I choose TJA1050T/VM over TJA1051T/3?
Choose TJA1050T/VM when maintaining a legacy design requires its established 8-pin pinout, 5 V supply arrangement, and classic high-speed CAN behavior. TJA1051T/3 belongs to a newer transceiver generation and may use different pin functions or electrical characteristics, so it is not a universal drop-in choice. Check the NXP datasheets and compare TXD, RXD, VIO, supply, bus, and control pins before migration.
What are the key specifications of TJA1050T/VM that engineers should know?
The TJA1050T/VM combines a maximum CAN signaling rate of 1 Mbaud, a 4.75 V to 5.25 V supply range, differential CANH and CANL bus pins, and an 8-pin SOIC package. It also provides TXD, RXD, silent-mode, and VREF functions. According to the NXP product page and manufacturer datasheet, it is a high-speed CAN physical-layer interface for automotive and industrial networks.
Where can I buy TJA1050T/VM and what is the current lead time?
Use the Request a Quote form on this page to request current TJA1050T/VM availability, lead time, and order handling. NXP identifies the TJA1050 family as end of life, so supply status can vary with remaining inventory and regional logistics. The form allows the requested quantity, package suffix, and delivery requirements to be confirmed before an order is placed.
Is TJA1050T/VM currently in stock?
Current TJA1050T/VM stock should be confirmed through the Request a Quote form on this page. The NXP product page identifies the TJA1050 family as end of life, making remaining inventory and lifecycle risk important considerations for maintenance purchases. Submit the exact TJA1050T/VM suffix and required quantity so availability can be matched to the requested configuration.
What is the price of TJA1050T/VM?
Current TJA1050T/VM pricing is handled through the Request a Quote form on this page. Because the device is an end-of-life component, quantity, package suffix, and remaining-market availability can materially affect the quotation. The form provides the appropriate route for obtaining a current offer without relying on an outdated catalog price.
How should VREF be used in a TJA1050T/VM CAN circuit?
VREF provides a reference voltage for the optional split termination arrangement used with some CAN receiver implementations. Its connection should follow the termination circuit shown in the NXP TJA1050 manufacturer datasheet rather than an improvised bias network. If the board does not use VREF, consult the datasheet instructions for that configuration before leaving the pin unconnected.
What PCB layout practices are important for TJA1050T/VM?
Route CANH and CANL as a short, continuous differential pair with symmetric geometry and controlled spacing from interference sources. Place the VCC decoupling capacitor close to the transceiver, provide a low-impedance ground connection, and avoid copper planes or high-current paths beneath the bus pair where they can disturb the differential impedance. Follow the NXP application guidance for termination and grounding.
Is TJA1050T/VM suitable for new automotive and industrial designs?
The TJA1050T/VM is suitable only when an existing design specifically requires its legacy interface, supply voltage, and pin behavior. NXP identifies the TJA1050 family as end of life, so new designs should evaluate a supported high-speed CAN transceiver and verify logic compatibility, EMC behavior, lifecycle status, and package pinout. For an existing production board, a qualified same-footprint replacement can reduce redesign work.

工程参考数据: TJA1050T/VM ——对比、设计指导和合规信息。

选型指南

Choose the TJA1050T/VM for maintaining an existing 5 V classic high-speed CAN design whose schematic and PCB use the established TXD, RXD, S, VREF, CANH, CANL, VCC, and GND arrangement. Prefer TJA1050T/H/V,118 or TJA1050T/CM,118 when their suffix-specific temperature and qualification ranges satisfy the equipment, because they remain within the TJA1050 family and simplify continuity planning. Consider TJA1057T,118 when its TXD timeout, fault behavior, and electrical limits are acceptable and the objective is a different NXP legacy generation. Consider TJA1021T/3 only after checking every pin and operating characteristic. For new designs, evaluate a currently supported CAN transceiver rather than starting a platform around an end-of-life component.

与替代料对比

参数 本产品 TJA1050T/H/V,118 TJA1050T/CM,118 TJA1057T,118 TJA1021T/3
Package SOIC-8 (8-SO) SOIC-8 (8-SO) - same SOIC-8 (8-SO) - same SOIC-8 (8-SO) - same SOIC-8 (8-SO) - same
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Product Type High-speed CAN transceiver High-speed CAN transceiver High-speed CAN transceiver High-speed CAN transceiver High-speed CAN transceiver
Maximum Data Rate 1 Mbaud 1 Mbaud 1 Mbaud 1 Mbaud 1 Mbaud
Number of Pins 8 pins 8 pins 8 pins 8 pins 8 pins
CAN Interface Differential CANH/CANL Differential CANH/CANL Differential CANH/CANL Differential CANH/CANL Differential CANH/CANL

关键差异点

  • Maintains the established TJA1050 controller and transceiver interface (对比 TJA1021T/3)
  • Provides a direct same-family path for TJA1050 maintenance designs (对比 TJA1057T,118)
  • Supports classic 1 Mbaud CAN without a CAN FD interface change (对比 TJA1057T,118)

设计说明

Route CANH and CANL as a continuous differential pair from pins 6 and 7 to the bus connector or termination point. Keep the pair closely coupled, minimize stubs, avoid routing across plane splits, and keep it away from switching regulators, relays, and high-current edges. Place the VCC decoupling capacitor close to pin 8 with a short ground return to pin 2. These layout controls protect differential signaling and reduce radiated emissions.

Do not treat a shared SOIC-8 footprint as sufficient proof of replacement compatibility. Confirm TXD, RXD, S, VREF, VCC, and GND assignments against the candidate datasheet, then compare logic thresholds, receiver hysteresis, bus-fault handling, TXD timeout behavior, and temperature range. Newer CAN FD devices may use different pin functions or logic rails and therefore require schematic or PCB changes rather than a drop-in substitution.

CAN bus nodes should use the termination arrangement specified by NXP for the complete network topology. Avoid placing long branches between a transceiver and the principal bus pair, because excessive stub length can increase reflections and emissions. Connect the transceiver ground to the system reference plane through a low-impedance path, and review the bus split location when VREF is used. Validate final radiated and conducted emissions on the completed assembly rather than relying only on schematic compliance.

Check the controller's TXD and RXD levels against the TJA1050T/VM input and output thresholds before using the device in a mixed-voltage design. The transceiver operates from 4.75 V to 5.25 V, but the digital interface must also meet the device's logic specifications. Provide local supply decoupling and minimize voltage drops between VCC and GND so controller and bus-interface devices see the same stable rail during bus activity.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The NXP product information identifies the TJA1050 family as end of life, but the accessible product information does not state the requested compliance results. Suffix-specific qualification must be confirmed from NXP documentation before automotive use.

相关搜索

tja1050t datasheet tja1050t cm 118 datasheet tja1050t cm 118 nxp tja1050t schematic TJA1050T/VM datasheet pdf TJA1050T/VM pinout TJA1050T/VM equivalent TJA1050T/VM replacement TJA1050T/VM vs TJA1057T,118 TJA1050T/VM application circuit NXP TJA1050T/VM TJA1050T/VM price

相关元器件 & 术语

NXP Semiconductors TJA1050T/VM TJA1050T/H/V,118 TJA1050T/CM,118 TJA1057T,118 TJA1021T/3 CAN transceiver Controller Area Network CAN protocol controller physical-layer interface high-speed CAN differential signaling CANH CANL TXD RXD VREF silent mode 1 Mbaud SOIC-8 SOIC package surface mount SMD interface IC semiconductor
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情