TJA1054T/N1M - 125 kBd Fault-Tolerant CAN Transceiver | NXP
料号: TJA1054T/N1M ✓ 量产中TJA1054T/N1M 概述
A CAN transceiver is an interface IC that converts logic-level signals between a host CAN controller and the differential CANH and CANL bus conductors. The TJA1054T/N1M belongs to the broader hierarchy of CAN interface ICs, network interface semiconductors, and connectivity semiconductors. Its bus-side interface handles dominant and recessive states, while the logic-side interface connects with the protocol controller through transmit, receive, enable, and related control signals.
According to the NXP TJA1054 data sheet, the TJA1054T is pin and downwards compatible with the PCA82C252T and TJA1053T. This compatibility supports replacement of those devices with the TJA1054T while retaining all functions. The improvement identified by NXP includes very low electromagnetic emission because of good matching between the CANL and CANH outputs. The fault-tolerant design also supports local wake-up detection through the WAKE pin and can assert the INH output to activate an external supply regulator.
The TJA1054T is primarily intended for low-speed applications up to 125 kBd in passenger vehicles and comparable embedded CAN networks. Typical uses include body-control modules, automotive comfort systems, door modules, seat controllers, lighting controllers, sensor interfaces, industrial automation equipment, and low-speed vehicle networks. Its interface role isolates the protocol controller from the physical bus while providing bus-side drive, receive, fault tolerance, and wake-up support.
When placing the device in a design, follow the manufacturer data sheet for the exact pin assignments, termination configuration, supply decoupling, bus polarity handling, and exposed fault conditions. The CANH and CANL traces should be routed as a differential pair, with the bus termination kept physically close to the connected nodes. The 14-pin SOIC footprint permits conventional PCB assembly, but the circuit must still be reviewed against the NXP application guidance for EMC performance and fault recovery.
This page combines the TJA1054T family identity, package information, compatibility information, replacement candidates, and practical selection considerations for engineers evaluating the TJA1054T/N1M. It distinguishes the base device from the N1M ordering suffix and directs detailed engineering decisions to the manufacturer data sheet, where the complete electrical limits, timing characteristics, pin descriptions, and test conditions are defined.
直接替换替代料: TJA1054T/N1M ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: TJA1054T/N1M (相同外形与封装尺寸) ——差异在于 Package, Product Type.
TJA1054T/VM,518
✅ 直接替换📋 参考替代料(不在目录中)
TJA1053T/N1
✅ 直接替换联系询价
查看数据手册 →PCA82C252T
✅ 直接替换📋 参考替代料(不在目录中)
TJA1054T/N1M 规格参数
| Product Type | Fault-tolerant CAN transceiver |
| Protocol | Controller Area Network (CAN) |
| Maximum Intended Data Rate | 125 kBd |
| Target Application | Low-speed passenger-car CAN networks |
| 封装 | 14-pin SOIC |
| 安装类型 | Surface mount |
| CAN Interface Type | 1/1 transceiver half |
| Local Wake-Up Support | Yes, through the WAKE pin |
| External Regulator Activation | INH output can activate an external supply voltage regulator |
| Compatibility | Pin and downwards compatible with PCA82C252T and TJA1053T |
| Electromagnetic Emission | Very low EME due to good CANL and CANH output matching |
TJA1054T/N1M 14-pin soic 引脚配置指南
TJA1054T/N1M(14-pin soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: TJA1054T/N1M.
请参阅 数据手册 以查看完整引脚配置。
典型应用
TJA1054T/N1M 适用于 6 应用s: Automotive Body Control Module, Door and Seat Control Module, Vehicle Lighting Controller, Industrial Automation Sensor Interface, Low-Speed CAN Gateway, Wake-Controlled Automotive Sensor Node.
Automotive Body Control Module
The TJA1054T/N1M fits low-speed body-control networks because it provides a fault-tolerant CAN interface for operation up to 125 kBd in a 14-pin SOIC package. Its good matching between CANH and CANL outputs supports very low electromagnetic emission, which is valuable when the module shares a wiring harness with lighting, comfort, and other vehicle systems. The local WAKE input and INH regulator-control output also support low-power body modules that must wake and activate an external supply. PCB implementation should follow the NXP data sheet for termination, decoupling, routing, and fault-recovery behavior.
推荐
Door and Seat Control Module
A TJA1054T/N1M is appropriate for distributed door, seat, and comfort-control nodes where low-speed CAN communication must coexist with potentially noisy automotive wiring. The transceiver operates up to 125 kBd and uses a fault-tolerant bus interface, while its very low electromagnetic emission reduces coupling into nearby sensitive electronics. In a typical module, a CAN controller drives the logic-side interface, the TJA1054T communicates through the differential CANH and CANL conductors, and the WAKE/INH path supports local activation of the module's supply.
推荐
Vehicle Lighting Controller
The TJA1054T/N1M can connect a lighting controller to a 125 kBd CAN network where fault tolerance and low bus emission are important design goals. Good CANL and CANH output matching helps reduce radiated emissions in an environment containing digital switching, relays, and long harness runs. The 14-pin SOIC package simplifies surface-mount assembly, while WAKE detection and the INH output can support coordinated activation of an external regulator. Engineers should preserve the recommended bus topology and validate EMC behavior in the completed vehicle electrical environment.
推荐
Industrial Automation Sensor Interface
The TJA1054T/N1M can serve as the physical-layer interface in a low-speed industrial CAN sensor node operating up to 125 kBd. Fault-tolerant CAN behavior is useful when sensors are connected through extended wiring where opens, shorts, or other bus faults may occur. Its low electromagnetic emission helps limit coupling into sensitive measurement circuitry, and the 14-pin SOIC package supports compact controller boards. The WAKE and INH functions allow a node to request activation of its local regulator, although the industrial system's isolation and grounding strategy must be reviewed independently.
推荐
Low-Speed CAN Gateway
A TJA1054T/N1M is suitable for a low-speed CAN gateway that connects a protocol controller to a physical vehicle or industrial bus. The 125 kBd operating target matches legacy CAN systems where reliable fault handling matters more than high throughput. The transceiver's very low EME, enabled by good matching between the CANH and CANL outputs, reduces system-level interference. Its SOIC-14 footprint allows the gateway to retain conventional surface-mount layout practices, while the local wake-up path can coordinate power-up of a downstream regulator through INH.
推荐
Wake-Controlled Automotive Sensor Node
The TJA1054T/N1M supports a wake-controlled sensor node by combining a fault-tolerant CAN interface with dedicated wake and regulator-control functions. A local request on the WAKE pin is recognized by the transceiver, and INH can be used to activate an external supply-voltage regulator, allowing the node to wake without keeping every subsystem permanently powered. The 125 kBd CAN interface remains appropriate for low-speed body and chassis-related networks. Firmware and hardware must validate the wake timing, reset state, and regulator sequencing defined by the manufacturer data sheet.
推荐
推荐产品汇总
工程参考数据: TJA1054T/N1M ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | TJA1054T/VM,518 | TJA1053T | PCA82C252T |
|---|---|---|---|---|
| Package | SOIC-14 | SOIC-14 | SOIC-14 | SOIC-14 |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Product Type | Fault-tolerant CAN transceiver | Fault-tolerant CAN transceiver | CAN transceiver | CAN transceiver |
| Downwards Compatibility | Replaces PCA82C252T and TJA1053T with retention of all functions | Same TJA1054T functional device | Predecessor replaced by TJA1054T | Predecessor replaced by TJA1054T |
关键差异点
- Lower electromagnetic emission through improved bus-output matching (对比 TJA1053T)
- Direct replacement path for the PCA82C252T (对比 PCA82C252T)
- Integrated system wake and regulator activation (对比 TJA1053T)
设计说明
Route CANH and CANL as a closely coupled differential pair on the PCB, following the NXP TJA1054 data-sheet layout guidance. Keep the transceiver away from switching nodes and high-current return paths, and place its decoupling capacitors close to the relevant supply and ground pins. Use the manufacturer-recommended CAN termination arrangement at appropriate bus nodes rather than adding unnecessary termination on every device, since excessive termination loads the bus and can impair communication.
Preserve the pin and downwards compatibility of the TJA1054T when laying out a board intended to accept PCA82C252T or TJA1053T alternatives. Verify every connection on the 14-pin SOIC footprint against the official pin-description table, including TXD, RXD, enable, WAKE, INH, CANH, CANL, supply, and ground. Do not infer pin functions from the ordering suffix because the suffix primarily identifies the delivery and grade configuration.
Take advantage of the TJA1054T's very low electromagnetic emission by maintaining symmetric CANH and CANL output matching and avoiding unnecessary stubs or long test pads. The low EME is especially valuable in compact vehicle modules where the CAN wiring shares an environment with relays, LED drivers, and other switched loads. Nevertheless, validate radiated and conducted emissions at the finished product level because PCB layout, harness geometry, termination, and cable resonances also determine system EMC performance.
Use the WAKE and INH functions as a coordinated low-power activation scheme rather than treating INH as an unrestricted power switch. The data sheet specifies detection of a local wake-up through a rising or falling edge followed by a level exceeding the maximum specified wake time. Validate wake thresholds, reset behavior, regulator sequencing, and bus state during startup so that the transceiver does not prevent the downstream controller or external regulator from reaching a stable operating condition.
Do not select the TJA1054T for a design requiring CAN FD or data rates above the stated 125 kBd low-speed application target. Also avoid treating the TJA1053T or PCA82C252T compatibility statements as permission to ignore operating-condition differences. Review the complete data sheets for supply limits, bus-fault behavior, timing, temperature range, and qualification requirements. The confirmed downwards compatibility provides a strong migration path, but production approval still requires application-level validation.
合规信息
The TJA1054T is an automotive-oriented low-speed CAN transceiver, but specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status were not established by the available product information and must be confirmed using the manufacturer ordering information or declaration.