TJA1054T/N1M - 125 kBd Fault-Tolerant CAN Transceiver | NXP
MPN: TJA1054T/N1M ✓ 啟用中TJA1054T/N1M 概覽
A CAN transceiver is an interface IC that converts logic-level signals between a host CAN controller and the differential CANH and CANL bus conductors. The TJA1054T/N1M belongs to the broader hierarchy of CAN interface ICs, network interface semiconductors, and connectivity semiconductors. Its bus-side interface handles dominant and recessive states, while the logic-side interface connects with the protocol controller through transmit, receive, enable, and related control signals.
According to the NXP TJA1054 data sheet, the TJA1054T is pin and downwards compatible with the PCA82C252T and TJA1053T. This compatibility supports replacement of those devices with the TJA1054T while retaining all functions. The improvement identified by NXP includes very low electromagnetic emission because of good matching between the CANL and CANH outputs. The fault-tolerant design also supports local wake-up detection through the WAKE pin and can assert the INH output to activate an external supply regulator.
The TJA1054T is primarily intended for low-speed applications up to 125 kBd in passenger vehicles and comparable embedded CAN networks. Typical uses include body-control modules, automotive comfort systems, door modules, seat controllers, lighting controllers, sensor interfaces, industrial automation equipment, and low-speed vehicle networks. Its interface role isolates the protocol controller from the physical bus while providing bus-side drive, receive, fault tolerance, and wake-up support.
When placing the device in a design, follow the manufacturer data sheet for the exact pin assignments, termination configuration, supply decoupling, bus polarity handling, and exposed fault conditions. The CANH and CANL traces should be routed as a differential pair, with the bus termination kept physically close to the connected nodes. The 14-pin SOIC footprint permits conventional PCB assembly, but the circuit must still be reviewed against the NXP application guidance for EMC performance and fault recovery.
This page combines the TJA1054T family identity, package information, compatibility information, replacement candidates, and practical selection considerations for engineers evaluating the TJA1054T/N1M. It distinguishes the base device from the N1M ordering suffix and directs detailed engineering decisions to the manufacturer data sheet, where the complete electrical limits, timing characteristics, pin descriptions, and test conditions are defined.
直接替換替代品,適用於 TJA1054T/N1M — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: TJA1054T/N1M (相同外形與佔位) — 差異在於 Package, Product Type.
TJA1054T/VM,518
✅ 直接替換📋 參考替代品(不在目錄中)
TJA1053T/N1
✅ 直接替換聯絡詢價
查看資料表 →PCA82C252T
✅ 直接替換📋 參考替代品(不在目錄中)
TJA1054T/N1M 規格
| Product Type | Fault-tolerant CAN transceiver |
| Protocol | Controller Area Network (CAN) |
| Maximum Intended Data Rate | 125 kBd |
| Target Application | Low-speed passenger-car CAN networks |
| 封裝 | 14-pin SOIC |
| 安裝類型 | Surface mount |
| CAN Interface Type | 1/1 transceiver half |
| Local Wake-Up Support | Yes, through the WAKE pin |
| External Regulator Activation | INH output can activate an external supply voltage regulator |
| Compatibility | Pin and downwards compatible with PCA82C252T and TJA1053T |
| Electromagnetic Emission | Very low EME due to good CANL and CANH output matching |
TJA1054T/N1M 14-pin soic 腳位配置指南
TJA1054T/N1M(14-pin soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: TJA1054T/N1M.
請參閱 資料表 以查看完整腳位配置。
典型應用
TJA1054T/N1M 適用於 6 應用s: Automotive Body Control Module, Door and Seat Control Module, Vehicle Lighting Controller, Industrial Automation Sensor Interface, Low-Speed CAN Gateway, Wake-Controlled Automotive Sensor Node.
Automotive Body Control Module
The TJA1054T/N1M fits low-speed body-control networks because it provides a fault-tolerant CAN interface for operation up to 125 kBd in a 14-pin SOIC package. Its good matching between CANH and CANL outputs supports very low electromagnetic emission, which is valuable when the module shares a wiring harness with lighting, comfort, and other vehicle systems. The local WAKE input and INH regulator-control output also support low-power body modules that must wake and activate an external supply. PCB implementation should follow the NXP data sheet for termination, decoupling, routing, and fault-recovery behavior.
推薦
Door and Seat Control Module
A TJA1054T/N1M is appropriate for distributed door, seat, and comfort-control nodes where low-speed CAN communication must coexist with potentially noisy automotive wiring. The transceiver operates up to 125 kBd and uses a fault-tolerant bus interface, while its very low electromagnetic emission reduces coupling into nearby sensitive electronics. In a typical module, a CAN controller drives the logic-side interface, the TJA1054T communicates through the differential CANH and CANL conductors, and the WAKE/INH path supports local activation of the module's supply.
推薦
Vehicle Lighting Controller
The TJA1054T/N1M can connect a lighting controller to a 125 kBd CAN network where fault tolerance and low bus emission are important design goals. Good CANL and CANH output matching helps reduce radiated emissions in an environment containing digital switching, relays, and long harness runs. The 14-pin SOIC package simplifies surface-mount assembly, while WAKE detection and the INH output can support coordinated activation of an external regulator. Engineers should preserve the recommended bus topology and validate EMC behavior in the completed vehicle electrical environment.
推薦
Industrial Automation Sensor Interface
The TJA1054T/N1M can serve as the physical-layer interface in a low-speed industrial CAN sensor node operating up to 125 kBd. Fault-tolerant CAN behavior is useful when sensors are connected through extended wiring where opens, shorts, or other bus faults may occur. Its low electromagnetic emission helps limit coupling into sensitive measurement circuitry, and the 14-pin SOIC package supports compact controller boards. The WAKE and INH functions allow a node to request activation of its local regulator, although the industrial system's isolation and grounding strategy must be reviewed independently.
推薦
Low-Speed CAN Gateway
A TJA1054T/N1M is suitable for a low-speed CAN gateway that connects a protocol controller to a physical vehicle or industrial bus. The 125 kBd operating target matches legacy CAN systems where reliable fault handling matters more than high throughput. The transceiver's very low EME, enabled by good matching between the CANH and CANL outputs, reduces system-level interference. Its SOIC-14 footprint allows the gateway to retain conventional surface-mount layout practices, while the local wake-up path can coordinate power-up of a downstream regulator through INH.
推薦
Wake-Controlled Automotive Sensor Node
The TJA1054T/N1M supports a wake-controlled sensor node by combining a fault-tolerant CAN interface with dedicated wake and regulator-control functions. A local request on the WAKE pin is recognized by the transceiver, and INH can be used to activate an external supply-voltage regulator, allowing the node to wake without keeping every subsystem permanently powered. The 125 kBd CAN interface remains appropriate for low-speed body and chassis-related networks. Firmware and hardware must validate the wake timing, reset state, and regulator sequencing defined by the manufacturer data sheet.
推薦
推薦產品摘要
工程參考資料,適用於 TJA1054T/N1M — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TJA1054T/VM,518 | TJA1053T | PCA82C252T |
|---|---|---|---|---|
| Package | SOIC-14 | SOIC-14 | SOIC-14 | SOIC-14 |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Product Type | Fault-tolerant CAN transceiver | Fault-tolerant CAN transceiver | CAN transceiver | CAN transceiver |
| Downwards Compatibility | Replaces PCA82C252T and TJA1053T with retention of all functions | Same TJA1054T functional device | Predecessor replaced by TJA1054T | Predecessor replaced by TJA1054T |
主要差異化特點
- Lower electromagnetic emission through improved bus-output matching (對比TJA1053T)
- Direct replacement path for the PCA82C252T (對比PCA82C252T)
- Integrated system wake and regulator activation (對比TJA1053T)
設計說明
Route CANH and CANL as a closely coupled differential pair on the PCB, following the NXP TJA1054 data-sheet layout guidance. Keep the transceiver away from switching nodes and high-current return paths, and place its decoupling capacitors close to the relevant supply and ground pins. Use the manufacturer-recommended CAN termination arrangement at appropriate bus nodes rather than adding unnecessary termination on every device, since excessive termination loads the bus and can impair communication.
Preserve the pin and downwards compatibility of the TJA1054T when laying out a board intended to accept PCA82C252T or TJA1053T alternatives. Verify every connection on the 14-pin SOIC footprint against the official pin-description table, including TXD, RXD, enable, WAKE, INH, CANH, CANL, supply, and ground. Do not infer pin functions from the ordering suffix because the suffix primarily identifies the delivery and grade configuration.
Take advantage of the TJA1054T's very low electromagnetic emission by maintaining symmetric CANH and CANL output matching and avoiding unnecessary stubs or long test pads. The low EME is especially valuable in compact vehicle modules where the CAN wiring shares an environment with relays, LED drivers, and other switched loads. Nevertheless, validate radiated and conducted emissions at the finished product level because PCB layout, harness geometry, termination, and cable resonances also determine system EMC performance.
Use the WAKE and INH functions as a coordinated low-power activation scheme rather than treating INH as an unrestricted power switch. The data sheet specifies detection of a local wake-up through a rising or falling edge followed by a level exceeding the maximum specified wake time. Validate wake thresholds, reset behavior, regulator sequencing, and bus state during startup so that the transceiver does not prevent the downstream controller or external regulator from reaching a stable operating condition.
Do not select the TJA1054T for a design requiring CAN FD or data rates above the stated 125 kBd low-speed application target. Also avoid treating the TJA1053T or PCA82C252T compatibility statements as permission to ignore operating-condition differences. Review the complete data sheets for supply limits, bus-fault behavior, timing, temperature range, and qualification requirements. The confirmed downwards compatibility provides a strong migration path, but production approval still requires application-level validation.
合規資訊
The TJA1054T is an automotive-oriented low-speed CAN transceiver, but specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status were not established by the available product information and must be confirmed using the manufacturer ordering information or declaration.