Infineon

TLE8458GV33XUMA2 - 3.3V LIN Transceiver | Infineon | Automotive

料号: TLE8458GV33XUMA2 ✓ 量产中
3.3 V Vdss 50 mA Id PG-DSO-8-16 Package
最小起订量: 1 |

TLE8458GV33XUMA2 概述

Infineon Technologies TLE8458GV33XUMA2 is an automotive LIN bus transceiver with an integrated 3.3 V voltage regulator, operating at up to 10.4 kBd in a PG-DSO-8-16 package. The device combines a LIN physical-layer transceiver, a local 3.3 V regulator capable of supplying 50 mA, and low-power wake-up functionality in one package. Its integration allows a LIN-connected microcontroller design to use fewer discrete components while preserving compatibility with established automotive LIN networks.

A LIN transceiver is an interface integrated circuit that connects a low-speed serial bus to a microcontroller or other logic device. LIN, or Local Interconnect Network, is used for distributed automotive functions such as door modules, seat controls, climate-control components, lighting modules, and body-electronics nodes. The TLE8458GV33XUMA2 belongs to the broader interface-IC and automotive-transceiver hierarchy, combining a bus transceiver, a low-dropout voltage regulator, and wake-up control within one device.

The TLE8458GV33XUMA2 provides a 10.4 kBd LIN data rate, a 3.3 V regulated output, and up to 50 mA of regulator output current. Infineon specifies the family as pin-compatible with stand-alone LIN transceivers such as the TLE7259-2GE and TLE7259-3GE, which can simplify transitions from a discrete transceiver-plus-regulator architecture to a combined solution. The combination also reduces typical application quiescent current to 8 uA while retaining LIN-bus and local-signal wake-up capability.

Automotive qualification is a major feature of this device family. The manufacturer identifies the TLE8458Gx as AEC-qualified and designed to operate in vehicle environments. Its LIN interface handles communication with automotive nodes, while the integrated regulator supplies a local 3.3 V rail to a host microcontroller. This division of responsibilities allows the host processor to communicate over LIN without implementing the physical bus interface separately.

Typical applications include automotive body controllers, door and seat modules, climate-control units, lighting controllers, sensor nodes, and LIN-to-CAN gateway electronics. The integrated regulator is particularly useful when a node needs both a LIN physical interface and a stable local 3.3 V supply. Designers should still verify the complete power distribution, bus topology, wake-up behavior, and load requirements for each vehicle platform.

Use the manufacturer datasheet and pin description when assigning PCB nets, especially for exposed-pad connection, LIN bus protection, and decoupling. Keep the LIN interface layout and regulator return paths compact, and confirm the selected power-management components against the device's stated operating and automotive qualification requirements before production release.

This page consolidates the known device specifications, package information, application guidance, replacement considerations, and design checks for engineers evaluating the TLE8458GV33XUMA2. It also distinguishes confirmed drop-in options from related devices that require different voltage, package, or sourcing decisions.

直接替换替代料: TLE8458GV33XUMA2 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

TLE8458GV33

✅ 直接替换
📦 PG-DSO-8-16
Same 3.3 V LIN-transceiver and integrated-regulator family; ordering-code and packaging suffix differ from TLE8458GV33XUMA2.

📋 参考替代料(不在目录中)

TLE8458GV33XUMA2 规格参数

Product Type LIN bus transceiver with integrated voltage regulator
LIN Bus Data Rate 10.4 kBd
Regulated Output Voltage 3.3 V
Regulator Output Current 50 mA
Typical Application Quiescent Current 8 uA
封装 PG-DSO-8-16
引脚数 8 pins
安装类型 Surface mount
Wake-Up Functions LIN bus signal and local wake-up signal
Pin Compatibility Reference Compatible with TLE7259-2GE and TLE7259-3GE stand-alone LIN transceivers
Automotive Qualification AEC qualified
Transceiver Direction Transmitter and receiver

TLE8458GV33XUMA2 pg-dso-8-16 引脚配置指南

TLE8458GV33XUMA2(pg-dso-8-16 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

TLE8458GV33XUMA2 的 pg-dso-8-16 封装引脚图

暂无详细引脚数据: TLE8458GV33XUMA2.

请参阅 数据手册 以查看完整引脚配置。

典型应用

TLE8458GV33XUMA2 适用于 6 应用s: Automotive Door Control Module, Automotive Climate-Control Module, Vehicle Lighting Controller, Automotive Sensor Node, Seat and Window Control Node, LIN-to-CAN Gateway Electronics.

🚗

Automotive Door Control Module

The TLE8458GV33XUMA2 fits a door module that must communicate over LIN while powering a local controller from a 3.3 V rail. Its 10.4 kBd LIN interface supports the bus rate used by automotive body systems, while the integrated regulator can provide up to 50 mA for a microcontroller and low-power peripherals. Using one device for the bus interface and regulator reduces component count compared with a separated architecture. The 8 uA typical application quiescent current is also valuable for parked vehicles. Final implementation must follow the manufacturer's reference behavior and local transient-protection requirements.

🏭

Automotive Climate-Control Module

A climate-control node can use the TLE8458GV33XUMA2 to connect its controller to a LIN sub-bus and generate a local 3.3 V supply. The 10.4 kBd bus capability is appropriate for distributed body electronics, while 50 mA of regulator output supports a modest control load. Combining the transceiver and regulator is especially helpful where PCB area is constrained. The design should still provide appropriate LIN bus protection and verify thermal behavior during repeated actuator activity and electrical transients.

💡

Vehicle Lighting Controller

The TLE8458GV33XUMA2 is suitable for a distributed lighting controller that accepts commands over LIN and operates from a regulated 3.3 V local rail. Its integrated regulator supports up to 50 mA, making it useful for a controller and logic rather than high-current LED drive. The transceiver's 10.4 kBd rate matches standard LIN node communication, and the 8 uA typical quiescent current helps limit standing consumption. LED drivers, switching power stages, and protection elements must be designed separately around their own voltage and thermal requirements.

🧩

Automotive Sensor Node

A LIN-connected sensor node can use the TLE8458GV33XUMA2 to provide both the physical bus interface and a regulated 3.3 V supply. The 50 mA regulator capability is appropriate for a sensor hub, microcontroller, and associated digital circuitry, while the 10.4 kBd interface handles command and diagnostic traffic. Wake-up support permits operation from a LIN bus signal or a local wake-up signal, useful in low-duty-cycle vehicle systems. Designers should verify the sensor's load current and wake-up timing against the complete electrical specification.

🚗

Seat and Window Control Node

The TLE8458GV33XUMA2 fits compact seat, window, or switch modules that use LIN for distributed control. A single IC provides the 10.4 kBd physical interface and a 3.3 V regulator output of up to 50 mA for local controller logic. This can simplify a module where actuator power and low-voltage control power are separated. The integrated architecture also supports low quiescent current for vehicles that spend extended periods parked. Final pin assignment and exposed-pad handling must follow the manufacturer package drawing.

🌐

LIN-to-CAN Gateway Electronics

The TLE8458GV33XUMA2 can supply the LIN-side physical interface and local 3.3 V rail in a gateway or body-network interface module. Its 10.4 kBd LIN capability is appropriate for the LIN side, while the regulator's 50 mA limit suits local interface logic rather than a complete processor platform. Wake-up from bus or local signals supports responsive network management. A gateway still requires its own CAN or higher-speed interface, processor, and power-tree design, so this device should be assigned only the LIN-side functions.

推荐产品汇总

TLE8458GV33XUMA2 Infineon 用于: Automotive Door Control Module, Automotive Climate-Control Module, Vehicle Lighting Controller, Automotive Sensor Node, Seat and Window Control Node, LIN-to-CAN Gateway Electronics TLE7259-2GE Pin-compatible stand-alone LIN transceiver reference 用于: Automotive Door Control Module, Vehicle Lighting Controller, Seat and Window Control Node TLE7259-3GE Related stand-alone LIN transceiver family 用于: Automotive Climate-Control Module, Automotive Sensor Node, LIN-to-CAN Gateway Electronics
What is the TLE8458GV33XUMA2?
The TLE8458GV33XUMA2 is an Infineon Technologies automotive LIN bus transceiver with an integrated 3.3 V voltage regulator. It supports LIN communication at 10.4 kBd and provides up to 50 mA from the local regulator. According to the Infineon TLE8458GV33 product page, the device also includes LIN-bus and local-signal wake-up functions and is housed in an eight-pin PG-DSO-8-16 package.
What are the key specifications of TLE8458GV33XUMA2 that engineers should know?
The principal TLE8458GV33XUMA2 specifications are a 10.4 kBd LIN data rate, a 3.3 V integrated regulator output, up to 50 mA of regulator current, and 8 uA typical application quiescent current. The device combines a LIN transmitter and receiver with a local 3.3 V supply in an eight-pin PG-DSO-8-16 package. Infineon also identifies the family as AEC-qualified and wake-up capable.
Where to download the TLE8458GV33XUMA2 datasheet PDF?
The TLE8458GV33XUMA2 datasheet PDF is available through the linked manufacturer documentation and the listed document mirror. The document describes the LIN transceiver, integrated 3.3 V regulator, wake-up behavior, electrical limits, and package information. Engineers should use the complete manufacturer datasheet for final pin assignments, timing limits, decoupling values, and automotive qualification details before releasing a production PCB.
Where can I find the TLE8458GV33XUMA2 pinout?
The TLE8458GV33XUMA2 pin assignments are defined in the manufacturer's pin-description table for the PG-DSO-8-16 package. The package contains eight external leads in addition to its exposed-pad construction indicated by the DSO-8-16 designation. Use the datasheet table and package drawing when assigning LIN, supply, ground, wake-up, and regulator-output nets; a complete pin table is not reproduced on this page.
Is the TLE8458GV33XUMA2 suitable for automotive body electronics?
The TLE8458GV33XUMA2 is suitable for automotive body-electronics applications because it is an AEC-qualified LIN transceiver with an integrated 3.3 V regulator. Its 10.4 kBd LIN rate and 50 mA regulator capability support distributed vehicle nodes. Final qualification still depends on the complete module, operating-temperature requirements, transient environment, protection network, and the vehicle platform's test specification.
What can replace the TLE8458GV33XUMA2?
The closest confirmed same-function replacement is the Infineon TLE8458GV33 family designation, which represents the same 3.3 V LIN-transceiver-with-regulator configuration in a different ordering-code form. Compatibility must still be checked against the complete ordering code, package marking, exposed-pad layout, firmware expectations, and qualification documentation. No additional cross-brand drop-in replacement has been established from the available technical information.
Is TLE8458GV33XUMA2 the same as TLE8458GV33?
The TLE8458GV33XUMA2 is an orderable member of the TLE8458GV33 device family and is identified by the Infineon product page as a 3.3 V LIN transceiver with integrated regulator. The shortened TLE8458GV33 designation refers to the family rather than necessarily specifying the exact packaging and ordering suffix. Confirm the full ordering code, reel configuration, and pin-compatible package variant before treating it as an exact replacement.
When should I choose TLE8458GV33XUMA2 over a discrete LIN transceiver and regulator?
Choose the TLE8458GV33XUMA2 when a module needs both a 10.4 kBd LIN physical interface and a local 3.3 V regulator up to 50 mA. Integrating both functions can reduce board area and typical application quiescent current to 8 uA while retaining wake-up operation. A discrete solution may be preferable when independent regulator scaling, unusual voltage levels, or revised bus timing is required.
What is the difference between TLE8458GV33XUMA2 and TLE8458G?
The TLE8458GV33XUMA2 provides a 3.3 V integrated regulator output, while the TLE8458G family designation is associated with a 5 V regulator option. Although both belong to the TLE8458Gx LIN-transceiver family and share a similar automotive integration concept, changing the regulator output can alter the host-microcontroller supply and board power tree. They should not be treated as drop-in equivalents without a complete schematic review.
Where to buy TLE8458GV33XUMA2 online?
Use the Request a Quote form on this page to request TLE8458GV33XUMA2 availability, current lead time, and order handling. The form is the appropriate route for obtaining a quotation without relying on potentially stale pricing. Before ordering, specify the exact TLE8458GV33XUMA2 ordering code and required reel or tray packaging so the manufacturer part and delivery format remain unambiguous.
What is the price of TLE8458GV33XUMA2?
Current TLE8458GV33XUMA2 pricing is obtained through the Request a Quote form on this page. The form allows quantity, target date, and delivery requirements to be reviewed without publishing a price that may quickly become outdated. Submit the exact ordering code and package preference with the request so the quotation corresponds to the intended eight-pin PG-DSO-8-16 device.
What is the lead time for TLE8458GV33XUMA2?
The current lead time for TLE8458GV33XUMA2 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, exact packaging format, production scheduling, and component availability. State the required delivery date and annual usage in the request so procurement can respond with an actionable schedule rather than a generic availability estimate.
Is TLE8458GV33XUMA2 in stock?
TLE8458GV33XUMA2 availability is handled through the Request a Quote form on this page. Request the required quantity, packaging format, target date, and shipment destination to obtain the current status. Because automotive inventory and lead time can change by order configuration, a request tied to a specific production schedule is more reliable than a general stock statement.
What is the best cross-brand equivalent for TLE8458GV33XUMA2?
No cross-brand drop-in equivalent has been established for the TLE8458GV33XUMA2 with the available technical information. A valid replacement would need to match the PG-DSO-8-16 footprint, 3.3 V integrated regulator, 50 mA output capability, 10.4 kBd LIN interface, wake-up behavior, and automotive qualification. Until those functions are independently verified, treat cross-brand candidates as new-design equivalents rather than drop-in replacements.
How much current can the TLE8458GV33XUMA2 regulator supply?
The integrated regulator in the TLE8458GV33XUMA2 can supply up to 50 mA. This makes it suitable for powering a local 3.3 V microcontroller rail and associated low-power circuitry in a LIN node. The 50 mA value is the regulator capability, not permission to exceed the complete device's thermal, supply, or pin limits; consult the datasheet limits and account for startup and line-transient requirements.

工程参考数据: TLE8458GV33XUMA2 ——对比、设计指导和合规信息。

选型指南

Choose the TLE8458GV33XUMA2 for a compact automotive LIN node that needs a 10.4 kBd transceiver, a 3.3 V local supply, and wake-up operation in one device. Its integrated 50 mA regulator is particularly useful for microcontroller and logic loads, while the stated 8 uA typical application quiescent current supports low-power vehicle systems. The TLE8458GV33 family designation is the closest confirmed alternative when the exact ordering and packaging suffix can be reconciled. Do not select the TLE8458G family for a board designed around a 3.3 V host supply unless the regulator output is intentionally changed. A stand-alone LIN transceiver may be preferable when the local regulator has different current, voltage, sequencing, or thermal requirements. No cross-brand drop-in alternative is recommended without independent verification of the footprint, regulator output, timing, wake-up behavior, and automotive qualification.

与替代料对比

参数 本产品 TLE8458GV33
Package PG-DSO-8-16 PG-DSO-8-16
Brand Infineon Technologies Infineon Technologies
Product Type LIN transceiver with integrated voltage regulator LIN transceiver with integrated voltage regulator
LIN Data Rate 10.4 kBd 10.4 kBd
Regulated Output Voltage 3.3 V 3.3 V
Regulator Output Current 50 mA 50 mA
Typical Application Quiescent Current 8 uA 8 uA
Wake-Up Capability LIN bus and local wake-up signal LIN bus and local wake-up signal
Automotive Qualification AEC qualified AEC qualified
Ordering Code TLE8458GV33XUMA2 Family designation; exact suffix must be confirmed

关键差异点

  • Combines the LIN physical interface and local regulator (对比 TLE7259-2GE)
  • Lower typical application quiescent current (对比 TLE7259-3GE)
  • Local 3.3 V rail for automotive controller logic (对比 TLE8458G)

设计说明

Assign the PCB footprint from the complete manufacturer package drawing rather than from the DSO-8-16 name alone. Confirm the exposed-pad geometry, thermal-via pattern, lead dimensions, and solder-mask requirements for the selected ordering code. Route the LIN bus and regulator return paths without long stubs, and place the prescribed input, output, and bus capacitors close to their associated pins.

Treat the integrated 3.3 V regulator as capable of supplying up to 50 mA, then design the local power tree for the actual controller, wake-up, and peripheral load. Include regulator headroom for startup, line transients, and temperature-dependent limits. Do not infer that the LIN bus voltage and the regulated 3.3 V output have the same operating range; verify each rail independently in the electrical-characteristics table.

Do not substitute the TLE8458G 5 V family option for the 3.3 V TLE8458GV33XUMA2 without redesigning the host-supply rail. Also verify wake-up polarity, timeout behavior, bus fault handling, and exposed-pad connection for every board revision. A shared family designation alone is not sufficient evidence that an exact ordering code is interchangeable.

Keep the LIN bus route physically separated from sensitive analog and high-speed digital paths where practical, and implement the manufacturer's recommended external protection network. Provide a low-impedance ground reference and short regulator connections to reduce coupling into the communication interface. Validate conducted and radiated emissions in the complete vehicle module because board enclosure, harness geometry, and neighboring power stages affect the final result.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Infineon identifies the TLE8458Gx family as AEC qualified. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement is present in the referenced technical information.

相关搜索

TLE8458GV33XUMA2 datasheet TLE8458GV33XUMA2 pinout TLE8458GV33XUMA2 datasheet pdf TLE8458GV33XUMA2 equivalent TLE8458GV33XUMA2 replacement TLE8458GV33XUMA2 cross reference TLE8458GV33XUMA2 footprint TLE8458GV33XUMA2 price TLE8458GV33XUMA2 stock Infineon TLE8458GV33XUMA2 TLE8458GV33XUMA2 automotive LIN TLE8458GV33XUMA2 vs TLE7259-2GE TLE8458GV33 3.3V LIN transceiver TLE8458GV33 PG-DSO-8-16

相关元器件 & 术语

Infineon Technologies TLE8458GV33XUMA2 TLE8458GV33 TLE8458G TLE7259-2GE TLE7259-3GE LIN transceiver Local Interconnect Network LIN bus automotive interface IC integrated voltage regulator low-dropout voltage regulator LDO 3.3 V regulator 10.4 kBd 50 mA 8 uA quiescent current wake-up PG-DSO-8-16 DSO package surface mount SMD AEC qualified automotive body electronics power management IC
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情