TLE8458GV33XUMA2 - 3.3V LIN Transceiver | Infineon | Automotive
MPN: TLE8458GV33XUMA2 ✓ Hoạt độngTLE8458GV33XUMA2 Tóm tắt
A LIN transceiver is an interface integrated circuit that connects a low-speed serial bus to a microcontroller or other logic device. LIN, or Local Interconnect Network, is used for distributed automotive functions such as door modules, seat controls, climate-control components, lighting modules, and body-electronics nodes. The TLE8458GV33XUMA2 belongs to the broader interface-IC and automotive-transceiver hierarchy, combining a bus transceiver, a low-dropout voltage regulator, and wake-up control within one device.
The TLE8458GV33XUMA2 provides a 10.4 kBd LIN data rate, a 3.3 V regulated output, and up to 50 mA of regulator output current. Infineon specifies the family as pin-compatible with stand-alone LIN transceivers such as the TLE7259-2GE and TLE7259-3GE, which can simplify transitions from a discrete transceiver-plus-regulator architecture to a combined solution. The combination also reduces typical application quiescent current to 8 uA while retaining LIN-bus and local-signal wake-up capability.
Automotive qualification is a major feature of this device family. The manufacturer identifies the TLE8458Gx as AEC-qualified and designed to operate in vehicle environments. Its LIN interface handles communication with automotive nodes, while the integrated regulator supplies a local 3.3 V rail to a host microcontroller. This division of responsibilities allows the host processor to communicate over LIN without implementing the physical bus interface separately.
Typical applications include automotive body controllers, door and seat modules, climate-control units, lighting controllers, sensor nodes, and LIN-to-CAN gateway electronics. The integrated regulator is particularly useful when a node needs both a LIN physical interface and a stable local 3.3 V supply. Designers should still verify the complete power distribution, bus topology, wake-up behavior, and load requirements for each vehicle platform.
Use the manufacturer datasheet and pin description when assigning PCB nets, especially for exposed-pad connection, LIN bus protection, and decoupling. Keep the LIN interface layout and regulator return paths compact, and confirm the selected power-management components against the device's stated operating and automotive qualification requirements before production release.
This page consolidates the known device specifications, package information, application guidance, replacement considerations, and design checks for engineers evaluating the TLE8458GV33XUMA2. It also distinguishes confirmed drop-in options from related devices that require different voltage, package, or sourcing decisions.
Bộ thay thế dễ dàng lắp đặt cho TLE8458GV33XUMA2 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
TLE8458GV33
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TLE8458GV33XUMA2 Thông số kỹ thuật
| Product Type | LIN bus transceiver with integrated voltage regulator |
| LIN Bus Data Rate | 10.4 kBd |
| Regulated Output Voltage | 3.3 V |
| Regulator Output Current | 50 mA |
| Typical Application Quiescent Current | 8 uA |
| Hộp | PG-DSO-8-16 |
| Số lượng chân | 8 pins |
| Kiểu lắp đặt | Surface mount |
| Wake-Up Functions | LIN bus signal and local wake-up signal |
| Pin Compatibility Reference | Compatible with TLE7259-2GE and TLE7259-3GE stand-alone LIN transceivers |
| Automotive Qualification | AEC qualified |
| Transceiver Direction | Transmitter and receiver |
Hướng dẫn cấu hình chân TLE8458GV33XUMA2 pg-dso-8-16
Cấu hình chân cho TLE8458GV33XUMA2 (pg-dso-8-16 gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho TLE8458GV33XUMA2.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TLE8458GV33XUMA2 phù hợp cho 6 Áp dụngs: Automotive Door Control Module, Automotive Climate-Control Module, Vehicle Lighting Controller, Automotive Sensor Node, Seat and Window Control Node, LIN-to-CAN Gateway Electronics.
Automotive Door Control Module
The TLE8458GV33XUMA2 fits a door module that must communicate over LIN while powering a local controller from a 3.3 V rail. Its 10.4 kBd LIN interface supports the bus rate used by automotive body systems, while the integrated regulator can provide up to 50 mA for a microcontroller and low-power peripherals. Using one device for the bus interface and regulator reduces component count compared with a separated architecture. The 8 uA typical application quiescent current is also valuable for parked vehicles. Final implementation must follow the manufacturer's reference behavior and local transient-protection requirements.
Được đề xuất
Automotive Climate-Control Module
A climate-control node can use the TLE8458GV33XUMA2 to connect its controller to a LIN sub-bus and generate a local 3.3 V supply. The 10.4 kBd bus capability is appropriate for distributed body electronics, while 50 mA of regulator output supports a modest control load. Combining the transceiver and regulator is especially helpful where PCB area is constrained. The design should still provide appropriate LIN bus protection and verify thermal behavior during repeated actuator activity and electrical transients.
Được đề xuất
Vehicle Lighting Controller
The TLE8458GV33XUMA2 is suitable for a distributed lighting controller that accepts commands over LIN and operates from a regulated 3.3 V local rail. Its integrated regulator supports up to 50 mA, making it useful for a controller and logic rather than high-current LED drive. The transceiver's 10.4 kBd rate matches standard LIN node communication, and the 8 uA typical quiescent current helps limit standing consumption. LED drivers, switching power stages, and protection elements must be designed separately around their own voltage and thermal requirements.
Được đề xuất
Automotive Sensor Node
A LIN-connected sensor node can use the TLE8458GV33XUMA2 to provide both the physical bus interface and a regulated 3.3 V supply. The 50 mA regulator capability is appropriate for a sensor hub, microcontroller, and associated digital circuitry, while the 10.4 kBd interface handles command and diagnostic traffic. Wake-up support permits operation from a LIN bus signal or a local wake-up signal, useful in low-duty-cycle vehicle systems. Designers should verify the sensor's load current and wake-up timing against the complete electrical specification.
Được đề xuất
Seat and Window Control Node
The TLE8458GV33XUMA2 fits compact seat, window, or switch modules that use LIN for distributed control. A single IC provides the 10.4 kBd physical interface and a 3.3 V regulator output of up to 50 mA for local controller logic. This can simplify a module where actuator power and low-voltage control power are separated. The integrated architecture also supports low quiescent current for vehicles that spend extended periods parked. Final pin assignment and exposed-pad handling must follow the manufacturer package drawing.
Được đề xuất
LIN-to-CAN Gateway Electronics
The TLE8458GV33XUMA2 can supply the LIN-side physical interface and local 3.3 V rail in a gateway or body-network interface module. Its 10.4 kBd LIN capability is appropriate for the LIN side, while the regulator's 50 mA limit suits local interface logic rather than a complete processor platform. Wake-up from bus or local signals supports responsive network management. A gateway still requires its own CAN or higher-speed interface, processor, and power-tree design, so this device should be assigned only the LIN-side functions.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TLE8458GV33XUMA2 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TLE8458GV33 |
|---|---|---|
| Package | PG-DSO-8-16 | PG-DSO-8-16 |
| Brand | Infineon Technologies | Infineon Technologies |
| Product Type | LIN transceiver with integrated voltage regulator | LIN transceiver with integrated voltage regulator |
| LIN Data Rate | 10.4 kBd | 10.4 kBd |
| Regulated Output Voltage | 3.3 V | 3.3 V |
| Regulator Output Current | 50 mA | 50 mA |
| Typical Application Quiescent Current | 8 uA | 8 uA |
| Wake-Up Capability | LIN bus and local wake-up signal | LIN bus and local wake-up signal |
| Automotive Qualification | AEC qualified | AEC qualified |
| Ordering Code | TLE8458GV33XUMA2 | Family designation; exact suffix must be confirmed |
Bảo phân biệt quan trọng
- Combines the LIN physical interface and local regulator (vsTLE7259-2GE)
- Lower typical application quiescent current (vsTLE7259-3GE)
- Local 3.3 V rail for automotive controller logic (vsTLE8458G)
Ghi chú thiết kế
Assign the PCB footprint from the complete manufacturer package drawing rather than from the DSO-8-16 name alone. Confirm the exposed-pad geometry, thermal-via pattern, lead dimensions, and solder-mask requirements for the selected ordering code. Route the LIN bus and regulator return paths without long stubs, and place the prescribed input, output, and bus capacitors close to their associated pins.
Treat the integrated 3.3 V regulator as capable of supplying up to 50 mA, then design the local power tree for the actual controller, wake-up, and peripheral load. Include regulator headroom for startup, line transients, and temperature-dependent limits. Do not infer that the LIN bus voltage and the regulated 3.3 V output have the same operating range; verify each rail independently in the electrical-characteristics table.
Do not substitute the TLE8458G 5 V family option for the 3.3 V TLE8458GV33XUMA2 without redesigning the host-supply rail. Also verify wake-up polarity, timeout behavior, bus fault handling, and exposed-pad connection for every board revision. A shared family designation alone is not sufficient evidence that an exact ordering code is interchangeable.
Keep the LIN bus route physically separated from sensitive analog and high-speed digital paths where practical, and implement the manufacturer's recommended external protection network. Provide a low-impedance ground reference and short regulator connections to reduce coupling into the communication interface. Validate conducted and radiated emissions in the complete vehicle module because board enclosure, harness geometry, and neighboring power stages affect the final result.
Thông tin tuân thủ
Infineon identifies the TLE8458Gx family as AEC qualified. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement is present in the referenced technical information.