TLP7930(D4-TP1 - 5000 Vrms Isolated Delta-Sigma Modulator
料号： TLP7930(D4-TP1 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $1.682 | $1.68 |
| 10 | $1.55 | $15.50 |
| 100 | $1.35 | $135.00 |
| 500 | $1.18 | $590.00 |
| 1,000 | $1.05 | $1,050.00 |
TLP7930(D4-TP1 概述
An isolated delta-sigma modulator is an isolation component that transfers a measured analog quantity across an electrically isolated boundary using optical coupling and digital modulation. Its output is not a conventional parallel ADC result; instead, the modulator produces a one-bit stream whose density represents the input voltage. The receiving system reconstructs or filters that stream digitally. This architecture places signal conditioning and noise rejection close to the isolated sensing circuit while avoiding a direct conductive path between the measured domain and the control domain.
The TLP7930 family uses a second-order sigma-delta modulation technique and a 1-bit output, according to the verified Toshiba-related datasheet descriptions. The listed isolation rating is 5000 Vrms. The product pages classify it as an isolation amplifier or optically isolated delta-sigma modulator and identify a digital output. The exact input range, bandwidth, supply limits, propagation timing, and pin-level electrical limits were not included in the provided verified data, so those values remain marked as data needed rather than being inferred.
The component is useful in inverter control, motor phase-current monitoring, isolated voltage measurement, power-factor conversion, and other systems where a high-side or floating-domain signal must reach a controller without sharing ground. The optical barrier supports galvanic separation, while the digital output can be processed by an MCU, DSP, FPGA, or dedicated sigma-delta input stage. Designers should verify the complete datasheet, recommended external components, filter requirements, timing budget, and isolation-rated PCB layout before production release.
Typical implementation places the TLP7930 between a scaled sensor or shunt signal and a digital controller. The analog input is filtered according to the device guidance, while the isolated one-bit output is routed to the controller or an external digital filter. This page combines verified manufacturer and distributor facts with clearly identified missing-data markers rather than presenting unverified electrical claims as specifications.
直接替换替代料： TLP7930(D4-TP1 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
快速对比工具——选择替代料号进行并排对比：
TLP7930(D4-TP1,F
✅ 直接替换📋 参考替代料（不在目录中）
TLP7930
✅ 直接替换📋 参考替代料（不在目录中）
TLP7930F
✅ 直接替换📋 参考替代料（不在目录中）
[DATA_NEEDED: verified cross-brand drop-in replacement]
✅ 直接替换📋 参考替代料（不在目录中）
[DATA_NEEDED: additional verified Toshiba drop-in equivalent]
✅ 直接替换📋 参考替代料（不在目录中）
TLP7930(D4-TP1 最大额定值与电气特性
| Product Type | Optically isolated delta-sigma modulator |
| Isolation Amplifier Output | Digital 1-bit output stream |
| Modulator Architecture | Second-order sigma-delta modulator |
| Isolation Voltage | 5000 Vrms |
| Isolation Technology | Optical coupling |
| Input Signal | Analog voltage signal |
| Manufacturer Classification | Isolation Amplifiers and Isolated Delta-Sigma Modulators |
| Package Description | DIP8 gull-wing surface-mount package |
| 引脚数量 | 8 pins |
| Termination/Packaging | Tape and reel |
| Approved Standard Marking | VDE approved, according to verified distributor listing |
| Lead-Free Marking | Pb-F marking reported by distributor listing |
TLP7930(D4-TP1 dip8 gull-wing surface-mount package 引脚配置指南
TLP7930(D4-TP1（dip8 gull-wing surface-mount package 封装）的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据： TLP7930(D4-TP1.
请参阅 数据手册 以查看完整引脚配置。
典型应用
TLP7930(D4-TP1 适用于 6 应用s: Motor Phase-Current Sensing, Inverter Current Sensing, Isolated Voltage Sensing, Power-Conversion Feedback, Industrial Current Monitoring, Isolated Sensor Interface.
Motor Phase-Current Sensing
The Toshiba TLP7930(D4-TP1 is well suited to motor phase-current monitoring because the verified Toshiba product page identifies motor phase-current sensing as an application. Its 1-bit second-order sigma-delta output transfers the analog sensing signal across an optical isolation barrier at a listed 5000 Vrms. Place the device where the shunt or current-sensor output must remain electrically separated from the controller ground, then filter the digital stream in the MCU or DSP. Verify the input range, bandwidth, timing, and external-filter requirements from the complete manufacturer datasheet before production.
推荐
Inverter Current Sensing
Use the TLP7930(D4-TP1 when an inverter measurement node must be isolated from the low-voltage control system. The verified listing describes the device as an isolation amplifier and isolated delta-sigma modulator with a digital output, while the Toshiba page identifies inverter current sensing. Its optically coupled signal path supports a floating measurement domain, and the one-bit stream can be decimated digitally after capture. The design should budget for input filtering, isolation clearances, controller timing, and any output reconstruction filter specified by Toshiba.
推荐
Isolated Voltage Sensing
The TLP7930(D4-TP1 can support isolated voltage sensing when the measured voltage must be transferred across a high-side or floating barrier. Its analog input is converted into a 1-bit second-order sigma-delta stream, allowing the receiving controller to perform digital filtering rather than directly measuring a high-voltage node. The verified data does not provide the input range or recommended scaling network, so those values must come from the Toshiba datasheet. Confirm that the divider, input filtering, isolation layout, and controller acquisition bandwidth satisfy the final accuracy and safety requirements.
推荐
Power-Conversion Feedback
The optically isolated sigma-delta architecture of the TLP7930(D4-TP1 is applicable to power-conversion feedback loops where switching nodes and control circuitry require galvanic separation. The verified product classification places it among isolation amplifiers and isolated delta-sigma modulators, and the listed 5000 Vrms rating supports high-side sensing use cases. Use the digital output as a feedback representation and filter it in the controller, while observing the manufacturer’s recommended input and output implementation. The tradeoff is added digital reconstruction and timing work compared with using a direct analog isolation path.
推荐
Industrial Current Monitoring
The TLP7930(D4-TP1 can be used in industrial equipment that measures current across a high-side bus, motor winding, or isolated sensor domain. The device’s optical coupling keeps the measured signal separated from the controller, while the 1-bit stream provides a digital interface suitable for embedded processing. The verified sources support the isolation and motor/inverter sensing use cases but do not provide CMRR, input impedance, or temperature limits. Engineers should validate those parameters against the datasheet, test the complete isolation path, and maintain the required creepage and clearance around the barrier.
推荐
Isolated Sensor Interface
TLP7930(D4-TP1 is appropriate when an analog sensor located on a floating power domain must communicate with a digital controller. The second-order sigma-delta modulator converts the sensor voltage into a one-bit stream across optical coupling, and the receiving processor can perform averaging, noise shaping, or decimation. This can simplify the controller-side acquisition path while preserving isolation. The supplied data does not identify the sensor input topology or recommended external components, so the sensor gain, anti-alias filtering, grounding, and calibration strategy must be derived from the official datasheet and application requirements.
推荐
推荐产品汇总
工程参考数据： TLP7930(D4-TP1 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | TLP7930(D4-TP1,F | TLP7930 | TLP7930F |
|---|---|---|---|---|
| Brand | Toshiba | Toshiba | Toshiba | Toshiba |
| Package | DIP8 gull-wing SMD | DIP8 gull-wing SMD | DIP8 gull-wing SMD | DIP8 gull-wing SMD |
| Product Type | Optically isolated delta-sigma modulator | Optically isolated delta-sigma modulator | Isolation amplifier and isolated delta-sigma modulator | TLP7930 family isolation modulator |
关键差异点
- Documented isolated sigma-delta measurement function （对比 Generic isolation amplifier)
- High listed isolation rating （对比 Lower-rated isolated signal devices)
- Application-specific positioning （对比 Unspecified isolated sensors)
设计说明
Treat the 1-bit output as a timing-sensitive digital stream rather than a conventional logic-level ADC result. Route the output with controlled impedance, keep it away from high-current switching paths, and provide a clean digital return on the receiving side. The verified data does not specify the output rate or logic thresholds, so use the Toshiba timing and recommended filtering information before assigning the stream to a microcontroller peripheral.
Preserve the isolation barrier geometry and follow the manufacturer’s recommended land pattern, creepage, clearance, and copper keepout rules. Place input filtering and any input protection close to the analog pins, and keep the isolation-side return current path compact. Do not place high-voltage switching copper beneath or across the barrier unless the package and safety guidance explicitly permit it.
Do not substitute the TLP7930(D4-TP1,F or TLP7930F naming variants without checking the exact suffix, temperature grade, package marking, and ordering information. The supplied search results establish family-level identity but do not provide a complete cross-reference table for every suffix. Confirm input range, supply rails, timing, isolation test conditions, and environmental ratings from the current Toshiba datasheet before releasing a BOM change.
合规信息
The verified Toshiba document note says to contact Toshiba sales for environmental information such as RoHS compatibility. A distributor listing reports a Pb-F marking, but this does not by itself establish full RoHS, REACH, halogen-free, or conflict-minerals status.
