Texas Instruments

TLV2455CN - 220 kHz Quad Rail-to-Rail Op Amp | Texas Instruments

料号: TLV2455CN ✓ 量产中
23 uA typical per amplifier Id 16-pin PDIP Package
最小起订量: 1 |

TLV2455CN 概述

The Texas Instruments TLV2455CN is a four-circuit, general-purpose operational amplifier with rail-to-rail input and output capability, a 220 kHz gain-bandwidth product, and 23 uA typical quiescent current, housed in a 16-pin PDIP package. The device includes a shutdown function and is intended for low-power applications requiring four amplifiers in one package. Its low operating current makes the TLV2455CN useful in portable instrumentation, sensor interfaces, audio signal paths, and general-purpose analog signal conditioning where supply efficiency and compactness are important.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The rail-to-rail input stage accepts signals close to the positive and negative supply rails, while the rail-to-rail output stage can swing close to those limits under suitable load conditions. Within the broader hierarchy, an operational amplifier is a linear amplifier and analog IC used for buffering, amplification, filtering, comparisons, feedback control, and signal conditioning.

The TLV2455CN provides four rail-to-rail amplifiers, 220 kHz gain-bandwidth product, and approximately 23 uA typical quiescent current. These characteristics make it appropriate for general-purpose low-power designs that do not require the bandwidth of a high-speed amplifier. A shutdown function allows the circuit to reduce power consumption when the analog section is inactive. Its PDIP package also supports conventional through-hole assembly, prototyping, and manual inspection.

Each amplifier is designed for conventional closed-loop operation using external feedback components. The combination of low quiescent current and rail-to-rail signal handling allows the device to operate close to its supply limits, reducing the required headroom in portable systems. Configuration resistors and compensation networks should be selected for the intended closed-loop gain because the bandwidth available for stable operation depends on that gain.

Typical uses include low-frequency sensor conditioning, microphone preamplification, current-to-voltage conversion, active filtering, and four-channel buffering. The four independent channels can also implement common analog functions such as two differential amplifiers, two comparators with suitable output saturation limits, or instrumentation-style signal conditioning. The shutdown pin is useful when battery life is more important than maintaining an active analog state.

For PCB design, keep input, feedback, output, and decoupling paths short, and place the power-supply bypass capacitor close to the device. Check input and output swing limits against the actual load and supply voltage. Because each channel is independent, unused amplifiers should be configured in a stable state rather than left with floating inputs.

This product data combines the manufacturer-family characteristics, package information, sourcing metadata, and engineering design guidance to support amplifier selection, PCB implementation, and replacement planning for the TLV2455CN.

直接替换替代料: TLV2455CN ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: TLV2455CN (相同外形与封装尺寸) ——差异在于 Amplifier Type.

Texas Instruments
Amplifier Type: General-purpose operational amplifier
对比 TLV2455CN →

TLV2455IN

✅ 直接替换
Texas Instruments
📦 16-pin PDIP
4 channels · General-purpose operational amplifier · 6 V · 220 kHz · 23 µA typical · 20 µV typical · Rail-to-rail · Rail-to-rail

联系询价

查看数据手册 →

TLV2455CN 最大额定值与电气特性

Amplifier Type Quad general-purpose operational amplifier
Number of Circuits 4 circuits
Rail-to-Rail Input Rail-to-rail
Rail-to-Rail Output Rail-to-rail
Gain-Bandwidth Product 220 kHz
静态电流 23 uA typical per amplifier
Shutdown Function Yes
Package Type 16-pin PDIP
安装方式 Through-hole
Product Category General-purpose amplifier
Number of Inputs 8 input pins for 4 differential amplifiers
输出数量 4 output pins

TLV2455CN 引脚配置

DIP-16 Package Pinout Diagram DIP-16 16-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 DIP-16
引脚 1 OUTA — Output of amplifier A
引脚 2 -INA — Inverting input of amplifier A
引脚 3 +INA — Non-inverting input of amplifier A
引脚 4 V- — Negative supply connection
引脚 5 +INB — Non-inverting input of amplifier B
引脚 6 -INB — Inverting input of amplifier B
引脚 7 OUTB — Output of amplifier B
引脚 8 OUTC — Output of amplifier C
引脚 9 -INC — Inverting input of amplifier C
引脚 10 +INC — Non-inverting input of amplifier C
引脚 11 V+ — Positive supply connection
引脚 12 +IND — Non-inverting input of amplifier D
引脚 13 -IND — Inverting input of amplifier D
引脚 14 OUTD — Output of amplifier D
引脚 15 SHDN — Shutdown control input
引脚 16 NC — Not connected

典型应用

TLV2455CN 适用于 6 应用s: Battery-Powered Sensor Conditioning, Portable Audio Signal Conditioning, Industrial Current-to-Voltage Conversion, Active Filtering and Signal Shaping, Medical Monitoring Interfaces, Automotive Low-Power Control Circuits.

🧩

Battery-Powered Sensor Conditioning

The TLV2455CN suits low-power sensor interfaces because each of its four amplifiers has approximately 23 uA typical quiescent current and accepts inputs that approach the supply rails. Place the active channels close to the sensor and use the shutdown control to disable the amplifier section when measurements are not required. Rail-to-rail input operation preserves signal range in compact systems, while the 220 kHz gain-bandwidth product supports low-frequency sensor signals rather than wideband waveform processing.

🎧

Portable Audio Signal Conditioning

The TLV2455CN can provide low-frequency microphone preamplification, buffering, and gain stages in portable audio equipment. Its rail-to-rail output capability is useful when the available headroom is limited, and the 220 kHz gain-bandwidth product is appropriate for many voice-band and control-signal paths. Four channels allow shared functions such as input amplification, active filtering, output buffering, and a second gain stage within one 16-pin PDIP package.

🏭

Industrial Current-to-Voltage Conversion

The TLV2455CN is well suited to current-to-voltage conversion in industrial instrumentation when the sensor output is small and the measurement bandwidth is limited to the low-frequency range. Its rail-to-rail input stage accommodates transduccer signals near the ends of the supply range, while approximately 23 uA typical quiescent current per channel helps limit power demand. The shutdown pin can deactivate the conversion path between measurement cycles.

📡

Active Filtering and Signal Shaping

The four TLV2455CN channels can implement cascaded active filters, gain stages, and buffers for low-frequency analog signals. A 220 kHz gain-bandwidth product gives design margin above many control, sensor, and audio-band applications, although closed-loop gain and stability requirements must be checked for each topology. Rail-to-rail output operation helps preserve dynamic range, and the shutdown function can reduce consumption when the filter is inactive.

💊

Medical Monitoring Interfaces

The TLV2455CN can support low-frequency front-end stages in medical monitoring equipment, including sensor buffering, gain amplification, and active filtering. Its rail-to-rail input capability is useful for compact systems where the measured signal may occupy much of the available supply range. The approximately 23 uA typical quiescent current supports power-constrained designs, while the shutdown function permits the analog front end to remain inactive between acquisition intervals.

🚗

Automotive Low-Power Control Circuits

The TLV2455CN can be evaluated for low-speed automotive control, actuator-driver, and sensor-interface blocks where four low-power amplifier channels are advantageous. Its 220 kHz gain-bandwidth product fits many control-loop and conditioning tasks, and the shutdown control can reduce demand during inactive periods. Automotive qualification is not established by the commercial suffix, so environmental, temperature, lifetime, and AEC-Q100 requirements must be verified before use in a safety-relevant vehicle design.

What is the TLV2455CN?
The TLV2455CN is a four-circuit, general-purpose operational amplifier with rail-to-rail input and output capability. According to the manufacturer datasheet, it combines a 220 kHz gain-bandwidth product with approximately 23 uA typical quiescent current in a 16-pin PDIP package. It is designed for low-power signal conditioning, buffering, filtering, and portable analog applications.
What are the key specifications of TLV2455CN that engineers should know?
The TLV2455CN integrates four rail-to-rail operational amplifiers in a 16-pin PDIP package. Its principal specifications include a 220 kHz gain-bandwidth product, approximately 23 uA typical quiescent current, and an integrated shutdown function. These values position it as a low-power, general-purpose amplifier for low-frequency signal-conditioning tasks rather than high-speed instrumentation.
What is the gain-bandwidth product of TLV2455CN?
The TLV2455CN has a 220 kHz gain-bandwidth product. According to the Texas Instruments datasheet, this parameter determines the approximate closed-loop bandwidth available when operating at a gain of one. Higher closed-loop gains reduce the usable bandwidth, so applications requiring high gain should account for that reduction during frequency-response planning.
Does TLV2455CN support rail-to-rail input and output?
Yes, the TLV2455CN supports rail-to-rail input and output operation. This allows input signals to approach the supply rails and permits output voltage to swing toward the rails under suitable loading conditions. The usable swing range still depends on supply voltage, load current, output configuration, and the voltage limits required by the connected circuit.
How much current does the TLV2455CN consume?
The TLV2455CN consumes approximately 23 uA typical quiescent current per amplifier in its specified operating condition. Because the package contains four amplifiers, a design that operates all channels can consume substantially more total current than the per-amplifier figure. The integrated shutdown function can reduce consumption when the analog circuitry is not required.
Where can I download the TLV2455CN datasheet PDF?
The TLV2455CN datasheet PDF is available through the manufacturer documentation linked from the product listings, with an accessible PDF copy listed on the product pages. The document identifies the device as part of the family of 23 uA, 220 kHz rail-to-rail input/output operational amplifiers with shutdown. Use the pin-description table and electrical-characteristics tables for final design sign-off.
Where can I find the TLV2455CN pinout?
The TLV2455CN pinout is shown in the pin-configuration section of the manufacturer datasheet. The device uses a 16-pin PDIP package containing four operational amplifiers and a shutdown control. When assigning PCB connections, verify the numbering against the physical notch at the top of the package and use the datasheet pin-description table for every amplifier channel.
What can replace the TLV2455CN?
The TLV2455IN is the closest documented same-family replacement candidate because it is listed as the same 16-pin PDIP, 220 kHz, rail-to-rail quad operational amplifier. Its notable difference is the temperature-grade designation. Confirm the complete electrical ratings, operating-temperature limits, shutdown behavior, and pin configuration before treating it as a drop-in replacement.
Can TLV2455IN replace TLV2455CN?
The TLV2455IN can be considered for a TLV2455CN replacement because both are listed as 16-pin PDIP, 220 kHz, rail-to-rail quad operational amplifiers. The part-number designation indicates a different temperature grade, so the replacement should be selected only when its full operating range satisfies the design requirements. Check the manufacturer ordering table and electrical ratings before production use.
What is the difference between TLV2455CN and TLV2455IN?
Both TLV2455CN and TLV2455IN are four-circuit, 220 kHz, rail-to-rail operational amplifiers in a 16-pin PDIP package. The primary documented difference is the temperature-grade suffix: the CN designation and IN designation identify different operating-temperature grades. Confirm the exact limits and any associated electrical specifications in the manufacturer datasheet before substitution.
When should I choose TLV2455CN over TLV2455IN?
Choose the TLV2455CN when its specified temperature range covers the intended ambient conditions and the commercial-grade designation is appropriate for the product. Consider the TLV2455IN when the application requires the broader industrial temperature grade while retaining the same 16-pin PDIP footprint and principal 220 kHz rail-to-rail amplifier characteristics. Qualification should include a full temperature-dependent review.
Is TLV2455CN suitable for battery-powered sensor interfaces?
The TLV2455CN is suitable for many battery-powered sensor interfaces because it combines approximately 23 uA typical quiescent current per amplifier with rail-to-rail input capability. It can condition signals that approach the supply rails without requiring a high-side input common-mode margin. The shutdown function is useful when the sensor interface can be disabled between measurements.
Where can I buy TLV2455CN and check its lead time?
Use the Request a Quote form on this page to request current TLV2455CN availability, pricing, minimum order quantity, and lead time. The form is the appropriate channel for a quote tied to the exact 16-pin PDIP ordering code. Confirm the requested quantity, delivery location, and date needed before releasing the manufacturing order.
What is the price of TLV2455CN?
Current TLV2455CN pricing depends on order quantity, delivery terms, and market availability. Submit the required quantity through the Request a Quote form on this page to obtain a current quotation for the exact 16-pin PDIP part. No fixed price should be assumed because distributor inventory and commercial terms can change independently of the component's technical characteristics.
Is TLV2455CN in stock and what is its lead time?
Stock status and lead time for TLV2455CN should be confirmed through the Request a Quote form on this page. Provide the required quantity, shipment destination, and target delivery date so current manufacturing and inventory conditions can be considered. This avoids treating a generic product-page availability statement as a firm allocation.
What is the best Analog Devices equivalent for TLV2455CN?
A definitive Analog Devices equivalent cannot be established from the documented cross-reference results because they identify tools and the TLV2455IN rather than a verified competitor MPN. Selecting a competitor requires confirmation of the same 16-pin PDIP footprint, pin-to-pin shutdown behavior, input common-mode range, output swing, bandwidth, quiescent current, and temperature grade. Use the manufacturer's cross-reference search or request engineering support for formal qualification.

工程参考数据: TLV2455CN ——对比、设计指导和合规信息。

选型指南

Choose the TLV2455CN when you need four rail-to-rail general-purpose amplifiers in a 16-pin PDIP package, approximately 23 uA typical quiescent current per channel, a 220 kHz gain-bandwidth product, and shutdown control. It is a strong fit for low-frequency sensor interfaces, active filters, current-to-voltage conversion, portable audio signal conditioning, and other low-power analog blocks. The TLV2455IN is the closest documented same-package alternative and should be considered when its temperature grade matches the operating environment more closely. Because both parts share the principal listed characteristics, temperature qualification is the principal selection distinction. Do not substitute a different package or a part with different shutdown behavior without reviewing the complete pin configuration and electrical specifications. For new high-volume or automotive designs, also confirm lifecycle, qualification, and sourcing requirements before committing the device to the BOM.

与替代料对比

参数 本产品 TLV2455IN
Brand Texas Instruments Texas Instruments
Package 16-pin PDIP 16-pin PDIP - same package
Number of Amplifiers 4 circuits 4 circuits
Gain-Bandwidth Product 220 kHz 220 kHz
Quiescent Current 23 uA typical per amplifier 23 uA typical per amplifier
Input Architecture Rail-to-rail Rail-to-rail
Output Architecture Rail-to-rail Rail-to-rail
Shutdown Function Yes Yes
Operating Temperature Grade CN grade; exact limits not stated IN grade; exact limits not stated

关键差异点

  • Four amplifiers integrated in one package (对比 TLV2455IN)
  • Low quiescent current for a rail-to-rail quad amplifier (对比 TLV2455IN)
  • Integrated shutdown control (对比 TLV2455IN)

设计说明

Estimate total quiescent current as four times the approximately 23 uA per-amplifier figure when all channels are active, giving about 92 uA before shutdown and load-current effects. This is an arithmetic estimate using the published per-channel value. Actual board demand also includes bias current, feedback-network current, output current, and leakage paths, so measure the completed design across its intended supply-voltage range.

Place the supply bypass capacitor immediately between the V+ and V- pins, with the shortest possible ground return. Route each amplifier's non-inverting input and feedback components away from adjacent high-impedance input nodes to reduce capacitive coupling. Because all four channels share the same package, separation between sensitive input traces and output or digital traces is especially important when the device handles low-level sensor signals.

Do not leave unused amplifier inputs floating. Tie an unused non-inverting input to a defined potential within the input common-mode range and connect its inverting input to the output, creating a stable unity-gain configuration. Also check the shutdown polarity and startup behavior in the manufacturer pin and electrical-characteristics tables before using SHDN as a system-level power-state control.

For gain or filtering stages, keep feedback resistors and compensation components close to their associated amplifier pins. The 220 kHz gain-bandwidth product is sufficient for many low-frequency stages, but higher closed-loop gains reduce bandwidth and can alter stability. Verify the intended gain, phase margin, capacitive loading, and output-swing requirement in simulation before releasing the PCB layout.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No specific compliance declarations were identified for the exact TLV2455CN ordering code. Check the current manufacturer product documentation and material declarations before using the device in regulated production.

相关搜索

TLV2455CN datasheet TLV2455CN pinout TLV2455CN datasheet pdf TLV2455CN specifications TLV2455CN 220 kHz TLV2455CN 16-PDIP TLV2455CN replacement TLV2455CN equivalent TLV2455CN vs TLV2455IN Texas Instruments TLV2455CN TLV2455CN price TLV2455CN stock TLV2455CN sensor interface TLV2455CN shutdown circuit How does TLV2455CN work?

相关元器件 & 术语

Texas Instruments TLV2455CN TLV2455IN operational amplifier quad operational amplifier linear amplifier analog integrated circuit signal-conditioning IC rail-to-rail input rail-to-rail output gain-bandwidth product quiescent current shutdown function SHDN pin 16-pin PDIP PDIP package through-hole package active filter sensor interface current-to-voltage conversion portable audio industrial instrumentation battery-powered equipment
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情