Texas Instruments

TLV2472CD - Dual 6V 2.8MHz RRIO Op Amp | Texas Instruments

料号: TLV2472CD ✓ 量产中
6 V Vdss 600 µA Id 8-pin SOIC (D) Package
最小起订量: 1 |

TLV2472CD 概述

The Texas Instruments TLV2472CD is a dual, 6 V, rail-to-rail input/output CMOS operational amplifier with a 2.8 MHz gain-bandwidth product, 600 µA per channel supply current, and an 8-pin SOIC package. The device combines low input bias current of 2.5 pA with 15 nV/√Hz input-voltage noise, making it suitable for precision signal-conditioning circuits that need low power, wide common-mode range, and usable bandwidth.

A rail-to-rail operational amplifier is an amplifier whose input common-mode range and output swing can extend toward the positive and negative supply rails. The TLV2472 belongs to the CMOS operational-amplifier hierarchy within the broader analog and semiconductor categories. Its rail-to-rail input stage accepts signals near the supply limits, while the rail-to-rail output stage increases dynamic range in low-voltage systems where conventional amplifier outputs cannot approach the rails.

The TLV2472CD's principal features include a 2.8 MHz gain-bandwidth product, 1.4 V/µs slew rate, 600 µA supply current per channel, and low 2.5 pA input bias current. According to the Texas Instruments TLV2472 family documentation, the amplifier provides 78 dB common-mode rejection and operates across a supply range suitable for low-voltage, battery-powered systems. These characteristics balance signal fidelity against the power budget better than a high-bandwidth amplifier operating continuously at substantially higher quiescent current.

The two amplifiers share a common supply arrangement but can operate independently for filtering, amplification, buffering, or level conversion. Rail-to-rail input capability is especially useful when sensing sensor outputs close to ground or near a positive rail. Rail-to-rail output behavior helps preserve signal amplitude in portable instrumentation, while the 2.8 MHz gain-bandwidth product supports moderate-frequency closed-loop amplifiers and active filters. Exact offset, output-current, and supply-current limits should be confirmed against the manufacturer datasheet for the selected operating conditions.

Typical applications include low-power sensor interfaces, battery-operated instrumentation, audio signal conditioning, active analog filters, transducer amplification, and low-voltage data acquisition. The 8-pin SOIC footprint is also convenient for industrial control, portable medical equipment, and consumer accessories where two independent amplifier channels reduce component count. Design effort should focus on input common-mode limits, output swing, capacitive-load stability, noise bandwidth, and the power consumed by both channels.

For battery-powered operation, calculate total supply consumption from both channels and account for output-current demand across the expected signal range. Place decoupling capacitors close to the supply pins, use short feedback paths, and verify stability with the source and load impedances used in the finished board. The SOIC package also requires adequate copper area and thermal planning when either channel drives a load near the device's output-current limit.

This product record combines the manufacturer's device specifications, package and ordering information, commercial availability details, same-family replacement analysis, and practical circuit-design guidance. It also distinguishes verified TLV2472-family options from broader amplifier types, helping engineers evaluate drop-in compatibility, power consumption, noise, temperature range, and application fit before finalizing a PCB design.

直接替换替代料: TLV2472CD ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

TLV2472ID

✅ 直接替换
📦 8-pin SOIC (D)
Operating-temperature grade changes from 0 °C to +70 °C for TLV2472CD to -40 °C to +125 °C for TLV2472ID, expanding the range by 100 °C at the cold limit and 55 °C at the hot limit.

📋 参考替代料(不在目录中)

TLV2472CD 最大额定值与电气特性

Amplifier Type Dual CMOS operational amplifier
Number of Channels 2 channels
Maximum Supply Voltage 6 V
Gain-Bandwidth Product 2.8 MHz
Slew Rate 1.4 V/µs
Supply Current per Channel 600 µA
Input Bias Current 2.5 pA
Input Voltage Noise Density 15 nV/√Hz
Common-Mode Rejection Ratio 78 dB
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
封装 8-pin SOIC (D)
安装类型 Surface-mount

TLV2472CD 引脚配置

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
引脚 1 OUTA — Output of amplifier A
引脚 2 IN A- — Inverting input of amplifier A
引脚 3 IN A+ — Non-inverting input of amplifier A
引脚 4 V+ — Positive supply connection
引脚 5 IN B+ — Non-inverting input of amplifier B
引脚 6 IN B- — Inverting input of amplifier B
引脚 7 OUTB — Output of amplifier B
引脚 8 V- — Negative supply connection, or ground in a single-supply circuit

典型应用

TLV2472CD 适用于 6 应用s: Battery-Powered Sensor Conditioning, Low-Noise Instrumentation Amplification, Active Analog Filtering, Audio and Microphone Preamplification, Portable Data Acquisition, Industrial Control and Transducer Interfaces.

🧩

Battery-Powered Sensor Conditioning

The TLV2472CD suits battery-powered sensor interfaces because each channel consumes approximately 600 µA while providing a 2.8 MHz gain-bandwidth product and 2.5 pA input bias current. Place the dual amplifier around a high-impedance sensor stage to amplify a small bipolar or unipolar signal without bias-current error dominating the measurement. Rail-to-rail input operation is useful when the sensor output approaches either supply rail, and rail-to-rail output preserves more of the conditioned signal swing in a compact, low-voltage system.

📟

Low-Noise Instrumentation Amplification

The TLV2472CD is appropriate for low-level instrumentation stages requiring 15 nV/√Hz input-voltage noise density and 78 dB common-mode rejection. Its dual architecture can implement a differential or noninverting conditioning stage, followed by filtering and output buffering within the same 8-pin SOIC. The 2.8 MHz gain-bandwidth product supports moderate-bandwidth closed-loop gains, while the 600 µA per-channel supply current limits power consumption in portable measurement equipment. Input and output headroom must still be checked across the complete signal range.

🔧

Active Analog Filtering

Both TLV2472CD channels can implement active low-pass, high-pass, or band-pass sections where a 2.8 MHz gain-bandwidth product and approximately 600 µA per channel are useful. The operational amplifier's rail-to-rail input and output characteristics support filters operating near low supply voltages, and the SOIC package allows the two sections to be placed close together. Select resistor and capacitor values against the desired gain and bandwidth, then verify closed-loop stability, capacitor tolerances, and output swing in the manufacturer datasheet.

🎧

Audio and Microphone Preamplification

The TLV2472CD can provide two channels of low-level audio or microphone amplification when low supply current is more important than wideband frequency response. Its rail-to-rail input stage accepts microphone-bias and source signals across nearly the full supply range, while 15 nV/√Hz noise density supports low-level acoustic measurements. The 1.4 V/µs slew rate allows small-signal waveform reproduction within the useful bandwidth. Confirm input capacitance, output drive, and the required gain-bandwidth relationship for the microphone impedance and line level.

🖥️

Portable Data Acquisition

The TLV2472CD supports compact data-acquisition front ends that need two independently configurable analog channels without a high-power amplifier. A typical arrangement uses one channel for signal conditioning and the other for buffering or an additional conversion input. The 600 µA per-channel current helps preserve battery life, while 2.8 MHz bandwidth accommodates sensors and control signals beyond the audio range. Rail-to-rail operation reduces lost signal range in low-voltage systems, and the 8-pin SOIC simplifies assembly compared with separate single-channel packages.

🏭

Industrial Control and Transducer Interfaces

The TLV2472CD can amplify and filter control-board sensor signals where the 2.8 MHz gain-bandwidth product is adequate for moderate-bandwidth feedback and data conversion. Its dual-channel configuration reduces the number of packages needed for input conditioning and auxiliary buffering, while low input bias current limits loading on high-impedance transducers. Because the CD grade is rated from 0 °C to +70 °C, industrial equipment with wider internal temperature variation should evaluate TLV2472ID or another explicitly temperature-rated device before production release.

推荐产品汇总

TLV2472ID Same-family 8-pin SOIC dual amplifier with an extended temperature range 用于: Battery-Powered Sensor Conditioning, Low-Noise Instrumentation Amplification, Active Analog Filtering, Audio and Microphone Preamplification, Portable Data Acquisition, Industrial Control and Transducer Interfaces TS974IDT STMicroelectronics 用于: Battery-Powered Sensor Conditioning, Low-Noise Instrumentation Amplification, Active Analog Filtering, Audio and Microphone Preamplification, Industrial Control and Transducer Interfaces MC3403DR Texas Instruments 用于: Portable Data Acquisition
What is the TLV2472CD?
The TLV2472CD is a dual, 6 V, rail-to-rail input/output CMOS operational amplifier from Texas Instruments. According to the TLV2472 manufacturer product page, it provides two amplifier channels, a 2.8 MHz gain-bandwidth product, and a supply current of approximately 600 µA per channel. The device is packaged in an 8-pin SOIC and is intended for low-voltage signal conditioning where low power and rail-to-rail operation are important.
What are the key specifications of TLV2472CD that engineers should know?
The TLV2472CD combines a 2.8 MHz gain-bandwidth product, 1.4 V/µs slew rate, and approximately 600 µA supply current per channel in an 8-pin SOIC. Texas Instruments lists 15 nV/√Hz input-voltage noise density, 2.5 pA input bias current, and 78 dB common-mode rejection for the TLV2472 family. Its rail-to-rail input and output stages are intended to preserve signal range in low-voltage, battery-powered designs.
What is the operating voltage range of TLV2472CD?
The TLV2472CD is specified for operation with a maximum supply voltage of 6 V. The manufacturer describes it as a low-voltage, dual rail-to-rail operational amplifier intended for portable and low-power systems. Exact minimum, typical, and maximum supply limits for each channel should be taken from the TLV2472 datasheet electrical-characteristics table before finalizing a design.
Where can I download the TLV2472CD datasheet PDF?
The official TLV2472 datasheet and product resources are available from the Texas Instruments product page at https://www.ti.com/product/TLV2472. That page links to the manufacturer documentation, ordering information, parameters, and package details for TLV2472CD. Use the manufacturer document for the authoritative pin description, electrical limits, typical-performance curves, and recommended application circuit.
Where can I find the TLV2472CD pinout?
The TLV2472CD pinout is documented in the manufacturer's TLV2472 family datasheet. Its 8-pin SOIC arrangement provides two inverting inputs, two non-inverting inputs, two outputs, and supply connections for the dual amplifier. Use the pin-description table and package drawing when assigning PCB tracks, particularly to confirm which pins are V+ and V− before power is applied.
Is the TLV2472CD suitable for low-voltage sensor interfaces?
Yes, the TLV2472CD is well suited to low-voltage sensor interfaces because it combines rail-to-rail input and output operation with 2.5 pA input bias current and a 2.8 MHz gain-bandwidth product. These characteristics are useful for high-impedance sensors and weak signals where bias-current error and clipping at the supply rails can limit useful measurement range.
What is the best drop-in replacement for TLV2472CD?
The closest documented same-family choice is the TLV2472ID, which uses the same 8-pin SOIC architecture and TLV2472-family electrical characteristics but extends the operating-temperature range to +125 °C compared with the TLV2472CD's 0 °C to +70 °C rating. Confirm pin assignments, enable behavior, supply limits, and production requirements in the manufacturer documentation before treating it as a drop-in replacement.
Can TLV2472ID replace TLV2472CD?
The TLV2472ID can be considered for a TLV2472CD position when an 8-pin SOIC and the same family pinout are required. Its principal documented difference is temperature grade: the TLV2472ID is rated from -40 °C to +125 °C, while the TLV2472CD is rated from 0 °C to +70 °C. This makes the ID variant the more appropriate choice for industrial-temperature environments.
TLV2472CD vs TLV2472ID - which is better for industrial use?
The TLV2472ID is generally the better choice for industrial use because it supports an operating-temperature range of -40 °C to +125 °C. The TLV2472CD is specified from 0 °C to +70 °C, so it may be insufficient for outdoor or temperature-varying equipment. Both retain the dual 2.8 MHz rail-to-rail amplifier architecture and 8-pin SOIC format.
When should I choose TLV2472CD over TLV2472ID?
Choose the TLV2472CD when the circuit operates within 0 °C to +70 °C and the commercial-temperature grade is appropriate. Choose the TLV2472ID when the same amplifier architecture must operate down to -40 °C or up to +125 °C. Because the ID provides a wider temperature range, it is generally the safer selection when the enclosure temperature is uncertain.
Is TLV2472CD the same as TLV2472ID?
The TLV2472CD and TLV2472ID share the same dual rail-to-rail TLV2472-family architecture and 8-pin SOIC package, but their temperature grades differ. TLV2472CD covers 0 °C to +70 °C, whereas TLV2472ID covers -40 °C to +125 °C. The temperature-grade distinction does not change the core 6 V, 2.8 MHz, 600 µA-per-channel functional description.
What can replace TLV2472CD?
TLV2472ID is the documented same-family replacement with a wider -40 °C to +125 °C temperature range and the same 8-pin SOIC format. Cross-brand amplifier replacements were not established for this package and pin configuration. Before substitution, verify the shutdown configuration, electrical limits, input and output common-mode behavior, and the exact SOIC footprint against the finished PCB.
Where can I buy TLV2472CD online?
Use the Request a Quote form on this page to ask for TLV2472CD availability, current lead time, and an order quotation. Texas Instruments identifies TLV2472CD as an 8-pin SOIC orderable variant, and distributor listings confirm an active commercial channel. The form is the appropriate route for a firm quotation tied to the exact TLV2472CD suffix and package.
What is the price of TLV2472CD?
Use the Request a Quote form on this page for the current TLV2472CD quotation and volume pricing. The component is an 8-pin SOIC device, and pricing can change with order quantity, market conditions, and packaging requirements. A quote tied to the exact manufacturer part number avoids ambiguity with tape-and-reel, temperature-grade, or other catalog variants.
What is the lead time and stock status for TLV2472CD?
Submit the exact part number TLV2472CD through the Request a Quote form on this page to confirm current stock, lead time, and minimum order quantity. Texas Instruments lists the device as an orderable TLV2472 variant, but current inventory and scheduling should be confirmed for the selected delivery quantity. Include the required shipment date in the request when timing is critical.
How should the TLV2472CD be decoupled and laid out?
Place the supply-bypass capacitor as close as practical to the TLV2472CD V+ and V− pins, and keep the return path short and low-impedance. Keep feedback components close to the amplifier inputs, avoid routing sensitive input nodes beneath or beside high-current outputs, and provide adequate ground-plane continuity under the SOIC. Verify capacitor ESR and stability requirements in the manufacturer datasheet.

工程参考数据: TLV2472CD ——对比、设计指导和合规信息。

选型指南

Choose the TLV2472CD for compact, low-voltage analog circuits that require two rail-to-rail amplifier channels, approximately 600 µA per channel, and a 2.8 MHz gain-bandwidth product. It is a practical fit for commercial-temperature sensor interfaces, low-level signal conditioning, active filters, and portable data-acquisition circuits using the 8-pin SOIC footprint. Select the TLV2472ID instead when the same family and package are needed but the enclosure temperature can fall below 0 °C or rise above +70 °C; its -40 °C to +125 °C rating provides that margin. Do not substitute the ID merely because the family description matches without checking the manufacturer pin table, shutdown configuration, electrical limits, and package dimensions. Cross-brand SOIC op amps may offer different noise, bias current, slew rate, output drive, stability behavior, and shutdown arrangements, so they require a full signal-chain review rather than footprint-only matching.

与替代料对比

参数 本产品 TLV2472ID
Package 8-pin SOIC (D) 8-pin SOIC (D)
Brand Texas Instruments Texas Instruments
Amplifier Configuration Dual operational amplifier Dual operational amplifier
Maximum Supply Voltage 6 V 6 V
Gain-Bandwidth Product 2.8 MHz 2.8 MHz
Slew Rate 1.4 V/µs 1.4 V/µs
Supply Current per Channel 600 µA 600 µA
Input Voltage Noise Density 15 nV/√Hz 15 nV/√Hz
Operating Temperature 0 °C to +70 °C -40 °C to +125 °C
Input and Output Common Mode Rail-to-rail input and output Rail-to-rail input and output

关键差异点

  • Low-power dual-channel architecture (对比 TLV2472ID)
  • Rail-to-rail signal range (对比 TLV2472ID)
  • Commercial-temperature operating range (对比 TLV2472ID)

设计说明

Estimated: at the stated typical supply current of 600 µA per channel, two channels drawing from a 5 V rail dissipate approximately 5 V × 1.2 mA = 6 mW under no-load conditions. Actual consumption rises with output current and operating frequency. Use the lower operating voltage permitted by the complete signal chain, disable unused channels where supported by the system design, and confirm the final dissipation using the manufacturer's maximum-current electrical characteristics.

Place the supply-bypass capacitor immediately adjacent to the positive and negative supply pins, with a short, low-impedance connection to the ground plane. Route the two channels separately when one handles a sensitive input and the other drives a capacitive or high-current load. Keep feedback resistors close to their associated input and output pins, and maintain continuous ground-plane area beneath the SOIC to reduce loop area and susceptibility to coupled noise.

Do not select the TLV2472CD solely from the 2.8 MHz gain-bandwidth figure. The usable closed-loop bandwidth also depends on noise gain, feedback topology, load capacitance, output-current demand, and input common-mode position. Check the output-swing limits against the required signal, verify capacitive-load stability with the actual source and load impedances, and use the TLV2472ID temperature grade when the enclosure may exceed the CD part's 0 °C to +70 °C range.

For a 1% feedback resistor and an amplifier gain-bandwidth product of 2.8 MHz, the approximate small-signal closed-loop bandwidth is 2.8 MHz divided by the noise gain. This estimate does not include slew-rate limitation, load effects, or the exact gain-bandwidth curve. Use the manufacturer's AC characteristic plots to confirm attenuation and phase margin, and preserve ground-return paths around both input channels to minimize common-mode pickup.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The component is identified by Texas Instruments as the TLV2472CD in an 8-pin SOIC (D) package. Explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not present in the cited product information.

相关搜索

TLV2472CD datasheet TLV2472CD pinout TLV2472CD datasheet pdf TLV2472CD specifications TLV2472CD equivalent TLV2472CD replacement TLV2472CD cross reference TLV2472CD vs TLV2472ID TLV2472CD footprint TLV2472CD spice model TLV2472CD price TLV2472CD stock Texas Instruments TLV2472CD TLV2472 2.8MHz dual op amp TLV2472CD low power amplifier

相关元器件 & 术语

Texas Instruments TLV2472CD TLV2472ID TLV2472 CMOS operational amplifier dual amplifier rail-to-rail input rail-to-rail output RRIO low-dropout operation gain-bandwidth product GBW slew rate input bias current input voltage noise density common-mode rejection ratio CMRR 8-pin SOIC SOIC family surface-mount package low-power analog circuit sensor signal conditioning active analog filter battery-powered instrumentation industrial control interface
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情