Texas Instruments

TLV2780ID - 8MHz RRIO Op Amp | TI Signal Conditioning

料号: TLV2780ID ✓ 量产中
1.8 V Vdss Low bias current Id 8-pin SOIC Package
最小起订量: 1 |

TLV2780ID 概述

The Texas Instruments TLV2780ID is a single operational amplifier with rail-to-rail input and output capability, an 8 MHz gain-bandwidth product, operation from a 1.8 V minimum supply, and a shutdown function. The device is packaged in an 8-pin SOIC and is identified by the manufacturer as a single 3.6 V, 8 MHz RRIO amplifier. Its rail-to-rail input allows signals to approach either supply rail, while rail-to-rail output improves dynamic range when the available output voltage is limited.

An operational amplifier is an analog signal-conditioning semiconductor that amplifies the voltage difference between its inverting and non-inverting inputs. It belongs to the voltage-feedback operational-amplifier family and the broader linear and mixed-signal IC hierarchy. Common functions include signal buffering, gain amplification, active filtering, level shifting, current-to-voltage conversion, and feedback control. Rail-to-rail input and output operation, abbreviated RRIO, broadens the usable input and output range in low-voltage systems.

The TLV2780ID combines an 8 MHz gain-bandwidth product with low-bias-current characteristics and shutdown support. These characteristics make it useful for instrumentation, general-purpose amplification, and buffering circuits operating from low-voltage supplies. Shutdown provides a way to control circuit operating state when conserving power is more important than continuous amplification. The manufacturer classifies the TLV2780ID as a general-purpose amplifier, supporting a broad range of analog signal-path requirements.

The device operates down to a 1.8 V supply voltage, while the official product page highlights a 3.6 V operating point and an 8 MHz bandwidth. The TLV278x family provides rail-to-rail input and output capability across the extended industrial temperature range of -40 °C to 125 °C. These figures define the operating envelope for precision control, industrial acquisition, portable instrumentation, and low-voltage embedded analog interfaces where headroom and thermal range are important design constraints.

Typical uses include conditioning outputs from sensors, buffering high-impedance analog stages, amplifying low-level differential signals, and implementing active filters. The low-bias-current characteristic is particularly relevant when the amplifier follows a source with high output impedance, because input bias current can create an offset error across the source impedance. The 8 MHz bandwidth also permits useful closed-loop bandwidth in moderate-gain applications rather than restricting the device to very slow precision-only functions.

Designers should verify the exact input common-mode limits, output swing, shutdown behavior, stability requirements, input bias current, offset voltage, noise, and supply-current limits against the manufacturer datasheet before finalizing a design. Decoupling, output-load stability, grounding, and shutdown-control sequencing should also be reviewed against the recommended application circuit. Those checks are especially important when the amplifier operates near a supply rail, drives a capacitive load, or sources and sinks signals at the limits of its output swing.

This page combines the manufacturer's product information with packaging details, practical application guidance, engineering design notes, and a package-compatible comparison. It is intended to help engineers identify whether the TLV2780ID's low-voltage RRIO performance, 8 MHz bandwidth, low bias current, shutdown function, and 8-pin SOIC implementation fit a particular analog signal-conditioning design.

直接替换替代料: TLV2780ID ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

TLV2782AIDR

✅ 直接替换
📦 8-pin SOIC
Same 8-pin SOIC footprint with 8 of 8 package positions matching; the TLV2782 family device has a different shutdown/control configuration that requires pin-level verification.

📋 参考替代料(不在目录中)

TLV2780ID 最大额定值与电气特性

Amplifier Type Single general-purpose operational amplifier
Number of Channels 1 channel
Gain-Bandwidth Product 8 MHz
Minimum Operating Supply Voltage 1.8 V
Nominal Supply Voltage 3.6 V
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Shutdown Support Yes
Input Bias Current Low bias current
工作温度范围 -40 °C to 125 °C
封装 8-pin SOIC
安装类型 Surface mount
引脚数 8 pins
Product Classification Standard general-purpose amplifier

TLV2780ID 8-pin soic 引脚配置指南

TLV2780ID(8-pin soic 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

TLV2780ID 的 8-pin soic 封装引脚图

暂无详细引脚数据: TLV2780ID.

请参阅 数据手册 以查看完整引脚配置。

典型应用

TLV2780ID 适用于 6 应用s: Low-Voltage Sensor Signal Conditioning, Precision Instrumentation Buffering, Active Filter and Frequency Response Design, Industrial Control Signal Interface, Portable and Embedded Analog Interfaces, Level Shifting and Output Drive.

📡

Low-Voltage Sensor Signal Conditioning

The TLV2780ID fits low-voltage sensor front ends that need input and output operation close to the supply rails. Its 1.8 V minimum supply and rail-to-rail input are useful when sensor signals occupy much of the available signal range. The low-bias-current characteristic helps limit input-referred error when the sensor source impedance is high. An 8 MHz gain-bandwidth product also permits useful closed-loop response in moderate-gain conditioning stages. The design should still calculate source-impedance error and confirm common-mode headroom against the datasheet limits.

🔬

Precision Instrumentation Buffering

The TLV2780ID can buffer instrumentation signals when a high-impedance source must drive a later measurement or control stage. Low bias current is the primary benefit because the amplifier input current interacts with source resistance and can generate unwanted voltage error. The rail-to-rail input and output characteristics preserve signal span in compact 1.8 V and 3.6 V systems. The 8 MHz bandwidth provides more closed-loop capability than a very slow general-purpose buffer. Use the manufacturer recommended operating region and check the source capacitance before finalizing the buffer configuration.

🎛️

Active Filter and Frequency Response Design

The TLV2780ID is suitable for active analog filters whose signal bandwidth is compatible with its 8 MHz gain-bandwidth product. Rail-to-rail input and output are advantageous when the filter processes small signals near the supply limits, while the low-bias-current characteristic helps preserve accuracy with high-impedance sources. Designers should select resistor and capacitor values using the required noise gain and verify stability at each stage. Because the 8 MHz figure describes gain-bandwidth product rather than guaranteed flat closed-loop bandwidth, the complete filter response must be evaluated with the selected topology.

🏭

Industrial Control Signal Interface

The TLV2780ID supports low-level analog signal interfaces in industrial equipment operating across the extended -40 °C to 125 °C temperature range. Its 1.8 V minimum supply can simplify low-voltage front ends, and the rail-to-rail input and output provide useful signal headroom. The shutdown function can reduce consumption when a subsystem is inactive. For an industrial design, verify supply tolerance, shutdown sequencing, output drive, and channel behavior throughout the intended temperature range. Surface-mount 8-pin SOIC packaging supports compact controller boards while simplifying assembly and inspection.

📱

Portable and Embedded Analog Interfaces

The TLV2780ID fits portable and embedded systems that combine a low-voltage supply with limited analog signal headroom. Operation from a 1.8 V minimum supply reduces the need for a higher-voltage analog rail, while rail-to-rail input and output maximize usable range within that supply. The shutdown function supports power management when the analog path is not continuously needed. In a compact design, place the device near the signal source, use a low-noise supply path, and verify the shutdown state before powering downstream circuitry. Thermal performance is generally manageable at low supply voltages, but final dissipation depends on the actual operating current.

🔄

Level Shifting and Output Drive

The TLV2780ID can perform level shifting between low-voltage analog domains because its output is specified as rail-to-rail. The single-amplifier configuration makes it useful for shifting a bipolar or single-ended signal into the input range of a downstream converter or controller. Rail-to-rail input support allows operation close to the negative and positive supply limits, but exact input and output limits depend on supply voltage and load. Verify the direction of the level shift, allowed input range, output swing, and load capacitance. The shutdown control should also be sequenced so the downstream device is not exposed to an unexpected output state.

推荐产品汇总

TLV2780ID Texas Instruments 用于: Low-Voltage Sensor Signal Conditioning, Precision Instrumentation Buffering, Active Filter and Frequency Response Design, Industrial Control Signal Interface, Portable and Embedded Analog Interfaces, Level Shifting and Output Drive TLV2782AIDR Related TLV278x-family amplifier candidate 用于: Low-Voltage Sensor Signal Conditioning, Precision Instrumentation Buffering, Active Filter and Frequency Response Design, Industrial Control Signal Interface, Portable and Embedded Analog Interfaces, Level Shifting and Output Drive
What are the key specifications of TLV2780ID that engineers should know?
The TLV2780ID is a single, general-purpose operational amplifier with rail-to-rail input and output, an 8 MHz gain-bandwidth product, and shutdown support. According to the Texas Instruments TLV2780 product page, it operates from a 1.8 V minimum supply and is available in an 8-pin SOIC package. The device also provides low bias current, making it relevant to high-impedance signal sources. Its extended industrial temperature range is -40 °C to 125 °C.
What is the operating voltage of TLV2780ID?
The TLV2780ID operates from a minimum supply voltage of 1.8 V, with 3.6 V identified as the nominal operating supply on the Texas Instruments product page. According to the manufacturer's TLV2780 documentation, rail-to-rail input and output capability allows the device to operate across low-voltage analog systems. Confirming the absolute maximum supply voltage and the valid limits of every electrical characteristic at the selected supply requires the manufacturer datasheet.
Where to download the TLV2780ID datasheet PDF?
The official Texas Instruments TLV2780 product page is the appropriate starting point for the TLV2780ID datasheet and supporting documentation. It identifies the device as a single 3.6 V, 8 MHz, rail-to-rail input/output operational amplifier with shutdown. Use the manufacturer's datasheet link on that product page to verify the ordering information, pin descriptions, electrical characteristics, and recommended application circuit before beginning layout.
Where can I find the TLV2780ID pinout?
The TLV2780ID pinout is documented in the manufacturer datasheet associated with the official Texas Instruments TLV2780 product page. The TLV2780ID is an 8-pin SOIC device, and the package drawing and pin-description table should be used to assign power, ground, input, output, and shutdown-control connections. Use those descriptions rather than inferring control polarity or signal pins from a similar amplifier.
Is TLV2780ID rail-to-rail on input and output?
Yes, the TLV2780ID provides rail-to-rail input and output capability. According to the Texas Instruments TLV2780 product page and TLV278x family description, the amplifier can accept input signals approaching the supply limits and provide output swing toward both rails. Actual usable input and output ranges vary with supply voltage and load, so the datasheet's common-mode and output-swing plots should guide design margins.
What is the gain-bandwidth product of TLV2780ID?
The TLV2780ID has an 8 MHz gain-bandwidth product. According to the Texas Instruments product page, this bandwidth supports the device's use as a general-purpose high-speed low-voltage operational amplifier. Closed-loop bandwidth depends on the selected noise-gain setting and circuit stability, so an 8 MHz gain-bandwidth product should not automatically be treated as an 8 MHz flat passband in every configuration.
Can TLV2780ID be used for instrumentation and signal buffering?
The TLV2780ID is suitable for instrumentation and signal buffering when the design stays within its documented electrical limits. Its low bias current is advantageous for high-source-impedance signals, while the 8 MHz gain-bandwidth product provides useful closed-loop response for moderate-gain stages. Texas Instruments identifies the device as a standard general-purpose amplifier, and its rail-to-rail input and output capability supports low-voltage signal-chain designs.
What is the shutdown function on the TLV2780ID used for?
The shutdown function is used to place the TLV2780ID into a reduced-power operating state when continuous amplification is unnecessary. According to the manufacturer's product description, shutdown is a defining feature of the TLV2780. The correct control logic, active state, transition timing, and output behavior must be taken from the datasheet before the control signal is connected in a system.
TLV2780ID vs TLV2782AIDR - which is better for a low-voltage amplifier design?
The TLV2780ID and TLV2782AIDR belong to the same Texas Instruments amplifier family and are associated with an 8-pin SOIC implementation. The TLV2780ID is the 8 MHz rail-to-rail amplifier with shutdown identified on the official product page, while the cross-reference information identifies TLV2782AIDR as a related family device. Choose based on the exact control-pin behavior, electrical limits, and package suffix verified in the datasheet.
What is the difference between TLV2780ID and TLV2782AIDR?
Both are Texas Instruments TLV278x-family amplifiers associated with an 8-pin SOIC package, but their shutdown or control characteristics must be compared directly before substitution. The TLV2780ID is explicitly described as an 8 MHz RRIO amplifier with shutdown. According to the manufacturer's family documentation, the TLV278x family includes related control configurations, so a pin-level and electrical comparison is necessary to determine the exact behavioral difference.
When should I choose TLV2780ID over a related amplifier?
Choose the TLV2780ID when the design requires a single low-voltage, 8 MHz, rail-to-rail input/output amplifier with shutdown and an 8-pin SOIC footprint. It is especially relevant to general-purpose instrumentation, buffering, and low-voltage signal conditioning. Select a related device instead when its documented control behavior, accuracy, noise, output drive, or supply range better matches the application.
Is TLV2780ID suitable for low-voltage sensor conditioning?
The TLV2780ID is well matched to low-voltage sensor conditioning when the source impedance, signal range, and required bandwidth remain within the manufacturer's limits. According to the Texas Instruments product page, it provides rail-to-rail input and output, low bias current, an 8 MHz gain-bandwidth product, and operation from 1.8 V. Bias-current-generated error and common-mode headroom should be evaluated before selecting the gain.
What can replace TLV2780ID?
The closest package-compatible family candidate identified for TLV2780ID is the Texas Instruments TLV2782AIDR in an 8-pin SOIC package. It may suit a replacement study, but shutdown-control behavior and electrical characteristics must be checked against the TLV2780ID datasheet. Treat the TLV2782AIDR as a candidate rather than a confirmed substitute until the pin functions, supply limits, and application performance have been compared.
Is TLV2780ID the same as TLV2782AIDR?
No. The TLV2780ID and TLV2782AIDR are related TLV278x-family amplifiers, but related family membership does not make them electrically identical. The TLV2780ID is specified at 3.6 V with 8 MHz bandwidth and shutdown, while the TLV2782AIDR requires review of its exact shutdown or enable configuration. Use the manufacturer pin descriptions and characteristic tables before making a direct substitution.
Where to buy TLV2780ID online and what is the price?
Use the Request a Quote form on this page to request current TLV2780ID availability, pricing, and lead time for the 8-pin SOIC ordering option. The device is identified by the manufacturer as an active TLV2780 family product. Requesting a quotation keeps the commercial response tied to the exact TLV2780ID suffix, package, quantity, and delivery requirements rather than a family-level or alternate-package listing.
What is the lead time and stock status for TLV2780ID?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this page using the exact TLV2780ID part number. Texas Instruments lists the TLV2780 family on its official product page, but current inventory and delivery commitments are not fixed by the technical product description. State the required quantity and target delivery date in the quotation request.

工程参考数据: TLV2780ID ——对比、设计指导和合规信息。

选型指南

Choose the TLV2780ID for a compact, low-voltage signal-conditioning design that requires a single amplifier, rail-to-rail input and output, an 8 MHz gain-bandwidth product, low bias current, and a shutdown function. It is particularly suitable for instrumentation buffers, high-impedance sensor interfaces, moderate-gain active filters, and embedded analog signal paths operating from 1.8 V or 3.6 V. The TLV2782AIDR is the closest identified package-compatible family candidate, but its control configuration must be checked because a related family member may use a different shutdown or enable arrangement. If a replacement must be unconditional, compare pin names, control polarity, common-mode range, output swing, stability, and absolute maximum ratings in the manufacturer datasheet. Do not select a 6-pin or 5-pin alternative when the existing PCB requires an 8-pin SOIC footprint.

与替代料对比

参数 本产品 TLV2782AIDR
Brand Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC
Shutdown or Control Function Shutdown Related family control configuration; exact behavior requires datasheet confirmation

关键差异点

  • Single 8 MHz RRIO amplifier with shutdown (对比 TLV2782AIDR)
  • Low-voltage analog headroom (对比 TLV2782AIDR)
  • Extended industrial temperature operation (对比 TLV2782AIDR)

设计说明

Verify the shutdown pin polarity and its effect on output state before connecting the control signal. A rail-to-rail input range does not mean that every input condition is acceptable at every supply voltage. Use the manufacturer's pin-description table, common-mode limits, and recommended application circuit, and ensure the control signal itself remains within the device's input limits when shutdown is asserted.

Place the amplifier close to the signal source and place its bypass capacitor at the supply pins using the shortest practical return path. Keep sensitive input nodes away from switching nodes and high-current return paths. Because the TLV2780ID supports low bias current and rail-to-rail inputs, PCB leakage and contamination can become significant in high-impedance instrumentation; clean boards and suitable guard or shielding techniques may matter more than ordinary low-frequency layout.

Treat the 8 MHz gain-bandwidth product as a closed-loop design limit rather than a guaranteed signal passband. Select noise gain according to the required stability and bandwidth, and evaluate capacitive loading at the output. If driving long cables, ADC inputs, or capacitive loads, use the manufacturer's stability information or isolate the amplifier with an appropriate resistor. Also confirm that the operating point remains inside the specified input common-mode range.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer product page and family documentation do not state the requested compliance statuses in the cited material. AEC-Q100 qualification is not indicated for the standard TLV2780ID.

相关搜索

TLV2780ID datasheet TLV2780ID pinout TLV2780ID datasheet pdf TLV2780ID equivalent TLV2780ID replacement TLV2780ID cross reference TLV2780ID vs TLV2782AIDR Texas Instruments TLV2780ID TLV2780ID 8MHz RRIO TLV2780ID 8-SOIC pinout TLV2780ID shutdown amplifier TLV2780ID sensor signal conditioning TLV2780ID price TLV2780ID stock TLV2780ID instrumentation buffer

相关元器件 & 术语

Texas Instruments TLV2780ID TLV2782AIDR TLV2780 TLV278x family operational amplifier voltage-feedback amplifier general-purpose amplifier rail-to-rail input rail-to-rail output RRIO shutdown function gain-bandwidth product low bias current instrumentation signal buffering active filter sensor conditioning 8-pin SOIC SOIC family surface-mount package semiconductor low-voltage analog circuit shutdown control 1.8 V minimum supply
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情