Texas Instruments

TUSB1146RNQT - 10Gbps USB-C Alt Mode Redriver | TI

料号: TUSB1146RNQT ✓ 量产中
40-pin WQFN (RNQ) Package
最小起订量: 1 |

TUSB1146RNQT 概述

The Texas Instruments TUSB1146RNQT is a protocol-agnostic USB Type-C Alt Mode redriver and crosspoint switch that supports USB 3.2 data rates up to 10 Gbps and DisplayPort 2.0 up to 10 Gbps. The device is housed in a 40-pin WQFN package measuring 6 mm by 4 mm and is intended for downstream-facing host ports.

A USB Type-C Alt Mode redriver is an interface IC that conditions high-speed differential signals between a USB Type-C controller and a connector or peripheral. It supports loss compensation for USB, DisplayPort, and other protocol-agnostic Alt Mode lanes. The TUSB1146 occupies the redriver, multiplexing, and signal-conditioning stages of a USB Type-C power and data interface.

The TUSB1146 supports USB 3.2 SuperSpeed signals at up to 10 Gbps and VESA DisplayPort 2.0 at up to 10 Gbps, or UHBR10. It supports USB 3.2 x1 Gen 1 and Gen 2, USB 3.2 SSP, two DisplayPort lanes, and four DisplayPort lanes. Its protocol-agnostic architecture also permits use with other USB Type-C Alt Mode interfaces, including HDMI Alt Mode.

The TUSB1146 provides adaptive equalization to compensate for channel loss encountered through PCB traces, connectors, and cables. Its crosspoint-switch architecture supports configurable lane routing for USB and DisplayPort Alt Mode. The manufacturer identifies support for DisplayPort D_DFP pin assignments C, D, and E, making it suitable for systems that require multiple high-speed lane arrangements in a compact host interface.

Typical uses include USB-C docking stations, multi-display adapters, notebook and tablet systems, desktop hosts, video-over-USB-C equipment, and industrial data-acquisition systems. The device is particularly relevant where cable or PCB losses could compromise 10 Gbps signal integrity but the host and connector placement cannot be shortened enough to eliminate the loss.

When laying out a design, preserve the high-speed signal paths as short and symmetric as possible, provide the reference-plane and return-path structures required by the manufacturer recommendations, and place bypass capacitance close to the supply pins. Differential pair geometry and connector launch transitions are especially important at 10 Gbps because the redriver compensates for loss but cannot remove reflections caused by an inconsistent PCB structure.

This page combines the TUSB1146RNQT protocol and package details, application guidance, sourcing information, and a strict assessment of available drop-in replacements. It is intended to help engineers confirm protocol coverage, mechanical fit, thermal expectations, and signal-integrity requirements before integrating the redriver into a USB Type-C Alt Mode design.

直接替换替代料: TUSB1146RNQT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

TUSB1146RNQT 规格参数

Device Type USB Type-C Alt Mode redriver and crosspoint switch
Maximum USB Data Rate 10 Gbps
Maximum DisplayPort Data Rate 10 Gbps
DisplayPort Generation DisplayPort 2.0 UHBR10
USB Protocol Support USB 3.2 x1 Gen 1 and Gen 2
USB SSP Support Yes
DisplayPort Lane Support 2 or 4 DisplayPort lanes
Supported D_DFP Pin Assignments Configurations C, D, and E
Signal Equalization Adaptive equalization
Architecture Protocol-agnostic linear redriver
Target Port Orientation Downstream-facing host port
Package Type 40-pin WQFN (RNQ)
Package Dimensions 6 mm x 4 mm
工作温度范围 0 C to 70 C
安装类型 Surface mount

TUSB1146RNQT 6 mm x 4 mm 引脚配置指南

TUSB1146RNQT(6 mm x 4 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

TUSB1146RNQT 的 6 mm x 4 mm 封装引脚图

暂无详细引脚数据: TUSB1146RNQT.

请参阅 数据手册 以查看完整引脚配置。

典型应用

TUSB1146RNQT 适用于 6 应用s: USB-C Docking Station, DisplayPort-over-USB-C Adapter, Notebook USB-C Port, Industrial Data-Acquisition System, Multi-Display USB-C System, Video Capture and Test Equipment.

🖥️

USB-C Docking Station

The TUSB1146RNQT fits a docking station that must preserve 10 Gbps USB and DisplayPort 2.0 UHBR10 links through connector and cable paths. Its adaptive equalization can recover high-frequency signal margin that would otherwise be lost through the downstream-facing host connection, while the crosspoint architecture supports USB 3.2 SSP and two- or four-lane DisplayPort arrangements. Place the device near the high-speed connector or controlled interconnect boundary and maintain the reference layout recommended by the manufacturer.

📺

DisplayPort-over-USB-C Adapter

The TUSB1146RNQT supports DisplayPort 2.0 Alt Mode at up to 10 Gbps, including UHBR10 operation and four-lane configurations. Adaptive equalization helps offset loss through an adapter PCB and external display cable, while the protocol-agnostic crosspoint can route supported DisplayPort lanes without relying on a protocol-specific multiplexer. Designers should still use short, impedance-controlled differential routes and verify the D_DFP C, D, and E assignments required by the target host.

💻

Notebook USB-C Port

A notebook or tablet can use the TUSB1146RNQT to condition 10 Gbps signals between its USB Type-C controller and a connector positioned beyond a long internal trace. The device supports USB 3.2 Gen 2 and DisplayPort 2.0, allowing one host-side interface architecture to cover multiple high-speed Alt Mode use cases. Thermal and layout planning should account for the 40-pin WQFN package, while equalization settings and lane routing should follow the manufacturer configuration procedure.

🏭

Industrial Data-Acquisition System

The TUSB1146RNQT is suitable for industrial acquisition equipment that connects a USB-C interface to sensors, storage, or test circuitry over a long board-level or cable path. Adaptive equalization can improve 10 Gbps signal margin across the lossy interconnect, and the protocol-agnostic design allows support for USB 3.2 SSP and DisplayPort Alt Mode links. Industrial designs should maintain continuous ground references, avoid discontinuities in the return path, and validate operation across the specified 0 C to 70 C temperature range.

📺

Multi-Display USB-C System

The TUSB1146RNQT can serve a USB-C system that must switch among USB and DisplayPort Alt Mode functions while supporting two or four DisplayPort lanes. Its crosspoint-switch capability provides a configurable path for protocol-agnostic high-speed signals, and adaptive equalization helps maintain link margin across connector and PCB losses. The implementation should verify every supported D_DFP configuration, C, D, or E, and use the manufacturer lane-routing and equalization procedure during hardware bring-up.

🔧

Video Capture and Test Equipment

The TUSB1146RNQT can condition a 10 Gbps USB 3.2 or DisplayPort 2.0 link in video capture, analysis, and signal-integrity test equipment. Adaptive equalization offers a way to recover signal margin across long internal traces, cable interfaces, and repeated connector transitions. Because the device is a linear redriver rather than a protocol converter, the surrounding system must configure the source, sink, lane routing, and Alt Mode negotiation correctly, followed by signal-integrity validation at the intended data rate.

What is the TUSB1146RNQT used for?
The TUSB1146RNQT is a protocol-agnostic USB Type-C Alt Mode redriver and crosspoint switch used to condition high-speed signals in downstream-facing host ports. According to the Texas Instruments product page, it supports USB 3.2 data rates up to 10 Gbps and DisplayPort 2.0 up to 10 Gbps. It can compensate for signal loss through PCB traces, cables, and connectors while supporting configurations C, D, and E.
What are the key specifications of TUSB1146RNQT that engineers should know?
The TUSB1146RNQT supports USB 3.2 up to 10 Gbps and DisplayPort 2.0 UHBR10 up to 10 Gbps in a 40-pin WQFN package measuring 6 mm by 4 mm. It provides adaptive equalization, protocol-agnostic linear redriver operation, and support for USB 3.2 SSP, two DisplayPort lanes, and four DisplayPort lanes. The specified operating-temperature range is 0 C to 70 C.
Where can I download the TUSB1146RNQT datasheet PDF?
The official TUSB1146 information is available on the Texas Instruments product page, which links to the device documentation, ordering information, and supported parameters. For the exact RNQ package and ordering options, open the TUSB1146RNQT part-details page identified in the datasheet link on this page. Use the manufacturer PDF for authoritative pin definitions, recommended layouts, and electrical characteristics.
Where can I find the TUSB1146RNQT pinout?
The TUSB1146RNQT pinout is published in the manufacturer datasheet for the 40-pin RNQ WQFN package. Use the pin-description table and package drawing to assign supply, ground, configuration, control, and high-speed differential signals. The device uses a 6 mm by 4 mm WQFN outline, so package drawings from unrelated 40-pin devices should not be substituted.
Where to buy TUSB1146RNQT online?
The TUSB1146RNQT can be requested through the Request a Quote form on this XAIPART page. The form is the appropriate channel for checking current unit availability, volume pricing, and lead time without relying on a static price. The requested MPN is TUSB1146RNQT, including the RNQ package suffix, so the quote will match the exact ordering code.
What is the price of TUSB1146RNQT?
Current pricing for TUSB1146RNQT should be requested through the Request a Quote form on this page. The form supports quantity-specific pricing and purchasing review without embedding a stale figure in technical content. Specify the required quantity, target date, and whether multiple TUSB1146 sites are needed so the quote can reflect the intended production commitment.
What is the lead time for TUSB1146RNQT?
The current lead time for TUSB1146RNQT should be confirmed through the Request a Quote form on this page. Submit the required quantity, production schedule, and ship-to region so the commercial response can reflect current allocation and logistics. The exact RNQ ordering code should be included in the request because package and reel configuration can affect assembly planning.
Is TUSB1146RNQT in stock?
Current TUSB1146RNQT inventory should be checked through the Request a Quote form on this page. Provide the required quantity and delivery schedule, and the commercial team can confirm availability for the exact RNQ ordering code. For production planning, include the required ship-to location and a date beyond which inventory allocation would affect the build schedule.
TUSB1146RNQT vs TUSB1146RNQR - which is better for a USB-C host design?
The selection should be based on the exact ordering option rather than assuming both suffix variants are interchangeable in every assembly flow. The TUSB1146RNQT is the stated 40-pin RNQ WQFN ordering code, while the compared RNQR variant may use a different reel or order format. Confirm the package drawing, pin functions, lifecycle status, and assembly requirements in the manufacturer ordering table before approving a substitution.
What is the difference between TUSB1146RNQT and a generic USB-C redriver?
The TUSB1146RNQT combines adaptive equalization with a protocol-agnostic linear redriver and crosspoint architecture for USB Type-C Alt Mode. It supports USB 3.2 at 10 Gbps, DisplayPort 2.0 UHBR10 at 10 Gbps, two or four DisplayPort lanes, and D_DFP configurations C, D, and E. A generic redriver may not provide this combination of protocol coverage, lane routing, and configuration support.
When should I choose TUSB1146RNQT over another redriver?
Choose the TUSB1146RNQT when a downstream-facing USB-C host must support 10 Gbps USB or DisplayPort 2.0 through a lossy interconnect and needs adaptive equalization. Its 40-pin WQFN package also fits systems requiring multiple high-speed lanes or configurable Alt Mode routing. A simpler redriver may be preferable only when the design does not require DisplayPort 2.0, four-lane operation, or the supported crosspoint configurations.
Is TUSB1146RNQT suitable for a DisplayPort-over-USB-C docking station?
The TUSB1146RNQT is suitable for a DisplayPort-over-USB-C docking station requiring DisplayPort 2.0 operation up to 10 Gbps. Its protocol-agnostic redriver and adaptive equalization can compensate for loss introduced by connector launches, internal routing, and cable paths. The final design must still preserve controlled differential impedance and provide the power, configuration, and bypass arrangements required by the datasheet.
What can replace TUSB1146RNQT?
No verified drop-in replacement for TUSB1146RNQT was identified from the available cross-reference information. A replacement must match the 40-pin RNQ footprint, pin functions, USB 3.2 rate, DisplayPort 2.0 capability, lane routing, and configuration requirements. Treat devices with similar data rates as functional alternatives only until their pinout and Alt Mode behavior have been checked against the manufacturer datasheets.
What is the best cross-brand equivalent for TUSB1146RNQT?
No cross-brand equivalent can be confirmed as a true drop-in replacement for the TUSB1146RNQT from the available component cross-reference information. The required comparison must include the 40-pin RNQ footprint, USB and DisplayPort lane assignments, control interface, equalization behavior, and 10 Gbps operation. Request manufacturer documentation for any proposed equivalent and perform a board-level signal-integrity comparison before changing the design.
How should TUSB1146RNQT be used in a 10 Gbps USB-C design?
Place the TUSB1146RNQT between the USB Type-C controller or source and the high-speed connector path, then route supported USB or DisplayPort lanes through its configurable crosspoint. Apply the manufacturer reference layout for supply decoupling, high-speed differential routing, grounding, and connector launches. The adaptive equalizer can compensate for channel loss, but it cannot correct poor impedance, asymmetric routing, or discontinuities introduced by the PCB.

工程参考数据: TUSB1146RNQT ——对比、设计指导和合规信息。

选型指南

Choose the TUSB1146RNQT when a downstream-facing USB-C host must support 10 Gbps USB, DisplayPort 2.0 UHBR10, or configurable USB and DisplayPort Alt Mode routing across a lossy interconnect. Its 40-pin RNQ WQFN package, adaptive equalization, support for two or four DisplayPort lanes, and D_DFP configurations C, D, and E make it appropriate for docking stations, notebooks, adapters, and professional video equipment. Select a simpler protocol-specific redriver when only USB 3.2 is required and the board does not need DisplayPort 2.0 or configurable Alt Mode routing. Do not substitute a candidate solely because it also reaches 10 Gbps: verify the RNQ footprint, pin assignments, equalization behavior, control interface, and Alt Mode configuration. When the source and sink are extremely close and channel loss is negligible, an additional redriver may add cost and complexity without providing a useful margin improvement.

与替代料对比

参数 本产品
Brand Texas Instruments
Package 40-pin WQFN (RNQ), 6 mm x 4 mm
Maximum USB Data Rate 10 Gbps
Maximum DisplayPort Data Rate 10 Gbps
DisplayPort Support DisplayPort 2.0 UHBR10
USB 3.2 Support x1 Gen 1 and Gen 2 with SSP support
DisplayPort Lane Support 2 or 4 lanes
Equalization Adaptive equalization
D_DFP Support Configurations C, D, and E
Operating Temperature 0 C to 70 C

关键差异点

  • Combines USB and DisplayPort high-speed redriving in one host-side device (对比 Generic protocol-specific USB redrivers)
  • Supports advanced DisplayPort operation (对比 DisplayPort 1.4-oriented redrivers)
  • Adapts to channel loss instead of relying only on fixed compensation (对比 Fixed-equalization redrivers)
  • Configurable high-speed lane routing (对比 Single-purpose signal conditioners)

设计说明

Route all 10 Gbps lanes as short, continuous, impedance-controlled differential pairs. Avoid changing layer references, adding unmatched stubs, and placing test pads directly in the high-speed path unless the component and board design support them. Keep the redriver close to the physical loss boundary when the far side contains a long PCB path or connector transition. Validate USB 3.2 and DisplayPort 2.0 margins separately because equalization behavior can differ by protocol and lane configuration.

Use the manufacturer reference layout and configuration procedure for the 40-pin RNQ package, including bypass placement, exposed-pad treatment, high-speed routing, and return-path continuity. The redriver can compensate for deterministic channel loss, but it cannot correct a split reference plane, an impedance discontinuity, or an improperly terminated differential pair. Measure eye quality and equalization behavior at the intended 10 Gbps operating point after connector and cable effects are included.

Place the required bypass capacitors close to their designated supply pins and keep their return connections within the device ground-return structure. Follow the manufacturer supply requirements and decoupling recommendations without substituting a larger capacitor without rechecking stability and power-supply behavior. Confirm the relationship between local supply noise and the adaptive equalizer performance, since clean power helps preserve the margin required for USB 3.2 and DisplayPort 2.0 operation.

Do not treat all USB-C redrivers as interchangeable. Confirm the 40-pin RNQ footprint, every high-speed lane assignment, control pins, protocol support, and the required D_DFP configuration before replacing the TUSB1146RNQT. Also verify whether a candidate supports DisplayPort 2.0 UHBR10, two- versus four-lane operation, and USB 3.2 SSP. A matching data-rate headline alone does not establish pin-to-pin compatibility.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Compliance status was not stated in the cited product information and must be confirmed in the manufacturer product documentation before an environmental or automotive qualification decision.

相关搜索

TUSB1146RNQT TUSB1146RNQT datasheet TUSB1146RNQT datasheet pdf TUSB1146RNQT pinout TUSB1146RNQT schematic TUSB1146RNQT equivalent TUSB1146RNQT replacement TUSB1146RNQT cross reference TUSB1146RNQT footprint TUSB1146RNQT price TUSB1146RNQT stock Texas Instruments TUSB1146RNQT TUSB1146 10Gbps redriver TUSB1146 DisplayPort 2.0 TUSB1146 WQFN-40 application circuit

相关元器件 & 术语

Texas Instruments TUSB1146 TUSB1146RNQT USB Type-C USB Type-C Alt Mode USB 3.2 USB 3.2 SSP DisplayPort 2.0 UHBR10 D_DFP DisplayPort configuration C DisplayPort configuration D DisplayPort configuration E protocol-agnostic linear redriver crosspoint switch adaptive equalization signal redriver USB interface IC 10 Gbps downstream-facing host port 40-pin WQFN RNQ package 6 mm by 4 mm package high-speed differential routing RoHS REACH AEC-Q100
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情