Microchip Technology

USB2640I-HZH-02 - USB 2.0 Hub & Flash Controller | Microchip

料号: USB2640I-HZH-02 ✓ 量产中
3.3 V Vdss 48-pin VQFN with exposed pad Package Low-speed, full-speed, and high-speed Speed
最小起订量: 1 |

USB2640I-HZH-02 概述

The Microchip Technology USB2640I-HZH-02 is an industrial-temperature USB 2.0 flash media controller and two-port Hi-Speed USB hub controller packaged in a 48-pin VQFN with exposed pad. It supports USB low-speed, full-speed, and high-speed operation, integrates a two-port USB 2.0 hub with flash-card media-reader functionality, and can sustain average transfer rates exceeding 35 MB/s.

A USB hub controller is an interface integrated circuit that expands one USB host connection into multiple downstream ports. The USB2640 family combines this hub function with a multi-format flash media controller, placing USB expansion and removable-storage access in one device. This integration can simplify desktop, notebook, industrial, and embedded system designs that need both peripheral connectivity and memory-card support.

The device supports USB 2.0 low-speed, full-speed, and high-speed operation. Its two-port Hi-Speed hub controller expands USB connectivity, while the integrated flash media controller supports reader and writer operation. The manufacturer data sheet reports average sustained transfer rates exceeding 35 MB/s, making the part suitable for storage workloads that require substantially more bandwidth than USB full-speed operation.

USB2640I-HZH-02 is identified for industrial-temperature operation and operates from a 3.3 V supply. The 48-pin, 7 x 7 mm QFN package uses an exposed pad for low-profile PCB integration and thermal dissipation. The HZH designation identifies the package configuration, while the final 02 code identifies the internal ROM firmware revision level according to the Microchip ordering documentation.

Typical applications include USB port expansion in desktop and notebook computers, industrial operator interfaces, multifunction panels, embedded control systems, and equipment that reads or writes flash media. Combining a hub controller and media controller reduces the need for separate USB-to-flash bridge devices when the board layout, firmware, and exposed-pad thermal design meet the device requirements.

Designers should follow the manufacturer reference schematic for high-speed USB routing, impedance control, crystal and decoupling placement, and exposed-pad connection. The 3.3 V supply must provide adequate transient current for the hub and attached USB loads, while the thermal design must dissipate regulator and interface heat without exceeding device temperature limits.

This page consolidates the USB2640I-HZH-02 device identity, manufacturer specifications, pin-compatible family alternatives, application guidance, and PCB design considerations into a practical engineering reference for evaluating this single-chip USB 2.0 hub and flash-controller solution.

直接替换替代料: USB2640I-HZH-02 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: USB2640I-HZH-02 (相同外形与封装尺寸) ——差异在于 Package, Product Type, Lead-Free Status, Mounting Type, RoHS Status.

Microchip Technology
Package: 48-pin QFN, 7 x 7 mm
Product Type: USB 2.0 hub controller with flash media controller
Lead-Free Status: Lead-free
对比 USB2640I-HZH-02 →
Microchip Technology
Product Type: USB 2.0 hub and flash-media interface controller
对比 USB2640I-HZH-02 →
Microchip Technology
Package: 48-QFN, 7 x 7 mm
Product Type: USB 2.0 flash media controller and 2-port USB hub controller
Mounting Type: Surface-mount QFN
对比 USB2640I-HZH-02 →
Microchip Technology
Package: 48-QFN, 7 mm × 7 mm
Product Type: USB 2.0 high-speed hub and flash media card controller
Lead-Free Status: Yes

USB2640-HZH-02

✅ 直接替换
Microchip Technology
📦 48-QFN (7x7)
USB 2.0 hub controller with flash media controller · Hi-Speed USB 2.0 · 2 ports · Multi-format flash media card reader/writer · 48-pin QFN, 7 x 7 mm · Surface mount · -02 internal ROM firmware revision · Compliant

联系询价

查看数据手册 →

USB2641-HZH-02

✅ 直接替换
Microchip Technology
📦 48-QFN (7x7)
USB 2.0 hub and flash-media interface controller · USB 2.0 Hi-Speed · 2 ports · Supported · 3.3 V · 48-QFN · 7 mm x 7 mm · Surface mount

联系询价

查看数据手册 →

USB2641I-HZH-02

✅ 直接替换 ⚠️ 规格未核验
Microchip Technology
📦 48-QFN (7x7)
USB 2.0 flash media controller and 2-port USB hub controller · USB 2.0 Hi-Speed · 2 downstream ports · Greater than 35 MB/s · 48-QFN, 7 x 7 mm · 48 pins · Integrated host-to-flash media card reader and writer interface

联系询价

查看数据手册 →

USB2642T-I/ML

✅ 直接替换
Microchip Technology
📦 48-QFN (7x7)
USB 2.0 high-speed hub and flash media card controller · USB 2.0 compliant · Low-speed, full-speed, and high-speed · 2 ports · Over 35 MB/s sustained · eMMC and other manufacturer-supported flash media formats · Controller Interface · I2C, SPI, and USB

联系询价

查看数据手册 →

USB2640I-HZH-02 规格参数

Device Type USB 2.0 flash media controller and two-port USB hub controller
USB Specification USB 2.0
Supported USB Speeds Low-speed, full-speed, and high-speed
Number of USB Hub Ports 2 ports
Average Sustained Transfer Rate Exceeding 35 MB/s
电源电压 3.3 V
Temperature Grade Industrial temperature
封装 48-pin VQFN with exposed pad
Package Dimensions 7 x 7 mm
安装类型 Surface mount
Lead-Free Status Lead-free package
RoHS Compliance RoHS compliant
Integrated Functions USB hub and flash media reader/writer
Media Support Multi-format flash media
Order Code HZH 48-pin QFN package configuration
Order Code 02 Internal ROM firmware revision level
USB Host Connection Upstream USB host interface
Port Expansion One upstream connection with two downstream USB 2.0 hub ports

USB2640I-HZH-02 7 x 7 mm 引脚配置指南

USB2640I-HZH-02(7 x 7 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

USB2640I-HZH-02 的 7 x 7 mm 封装引脚图

暂无详细引脚数据: USB2640I-HZH-02.

请参阅 数据手册 以查看完整引脚配置。

典型应用

USB2640I-HZH-02 适用于 6 应用s: Desktop and Notebook USB Port Expansion, Industrial Operator Panels, Embedded Flash Media Access, Multifunction Self-Service Terminals, Test and Measurement Equipment, Portable Data Acquisition Systems.

🖥️

Desktop and Notebook USB Port Expansion

The USB2640I-HZH-02 is suitable for desktop and notebook systems that need to expand one upstream USB host connection into two downstream Hi-Speed USB 2.0 ports while retaining integrated flash-media access. Its two-port hub architecture reduces the need for a separate USB hub, while the reported sustained transfer rate exceeding 35 MB/s supports demanding removable-storage workflows. The 48-pin, 7 x 7 mm VQFN also supports compact board integration. Designers should follow the manufacturer reference layout for controlled-impedance USB routing, supply decoupling, crystal placement, and exposed-pad thermal vias.

🏭

Industrial Operator Panels

Industrial operator panels often need several USB peripherals plus local removable storage, yet panel space and thermal dissipation are constrained. USB2640I-HZH-02 combines two Hi-Speed USB 2.0 downstream ports and a flash reader/writer in one industrial-temperature component. The integrated approach can reduce component count compared with separate hub and media-controller solutions. Its sustained transfer performance exceeding 35 MB/s is beneficial for transferring maintenance logs, recipes, and machine data. The exposed thermal pad must be connected to a low-impedance ground plane and copper area with multiple thermal vias to maintain reliable operation.

🧩

Embedded Flash Media Access

The USB2640I-HZH-02 fits embedded systems that expose removable flash storage through a USB host interface. Its integrated media reader and writer can provide sustained transfer rates exceeding 35 MB/s while also offering two downstream USB 2.0 hub ports for keyboards, service tools, or data-transfer devices. This combination simplifies the USB connectivity portion of a controller board compared with using separate media and hub ICs. Firmware support, media-format compatibility, and connector behavior should be verified against the manufacturer documentation before production.

🔧

Multifunction Self-Service Terminals

Self-service terminals can benefit from the USB2640I-HZH-02 because one controller provides both card-reader access and two USB expansion ports. Payment accessories, identification readers, printers, or removable media can be connected without implementing independent USB controllers at each interface. The device supports USB low-speed, full-speed, and high-speed operation, allowing it to work with both low-bandwidth peripherals and high-speed storage. Industrial-temperature operation supports deployments in kiosks and self-service equipment. Designers should reserve careful routing space for high-speed differential pairs and provide short, properly terminated USB connections.

📟

Test and Measurement Equipment

Test and measurement instruments frequently need removable media for logging, calibration files, and field upgrades alongside external USB peripherals. The USB2640I-HZH-02 provides integrated flash-media access plus two Hi-Speed USB 2.0 hub ports, allowing one upstream host connection to serve several device functions. Sustained transfer rates exceeding 35 MB/s can accelerate large log transfers when the connected media and host system support comparable performance. The 3.3 V device requires a quiet supply arrangement, while the exposed pad should be treated as both a thermal feature and a carefully designed return path.

📱

Portable Data Acquisition Systems

Portable data-acquisition equipment can use the USB2640I-HZH-02 to combine direct media exchange with expansion for sensors, service cables, or external storage. The two-port Hi-Speed USB hub supports multiple peripheral roles, while the integrated flash reader and writer provides a path for importing recorded data or exporting configuration files. The controller's reported sustained transfer capability exceeding 35 MB/s helps reduce transfer delays during field operations. Industrial-temperature suitability makes the device relevant to mobile equipment exposed to variable ambient conditions, although the complete enclosure, supply design, and USB cable qualification remain system responsibilities.

What is the USB2640I-HZH-02?
The USB2640I-HZH-02 is a single-chip industrial-temperature USB 2.0 controller that combines a two-port Hi-Speed USB hub with a flash media reader and writer. According to the Microchip USB2640i/USB2641i data sheet DS00001948B, it supports low-speed, full-speed, and high-speed USB operation. The device uses a 3.3 V supply and is packaged in a 48-pin, 7 x 7 mm VQFN with an exposed pad.
How many USB ports does USB2640I-HZH-02 provide?
The USB2640I-HZH-02 provides two downstream Hi-Speed USB 2.0 hub ports in addition to its upstream host connection. The Microchip product description identifies it as a cost-effective, power-efficient two-port USB 2.0 hub controller. This makes it appropriate for equipment that must expose multiple USB connections while also supporting an integrated flash-card interface.
What data transfer rate can USB2640I-HZH-02 achieve?
The USB2640I-HZH-02 can achieve average sustained transfer rates exceeding 35 MB/s in suitable flash-media configurations. The Microchip USB2640i/USB2641i data sheet DS00001948B identifies this performance for the integrated reader and writer function. Actual system throughput also depends on the media device, host controller, cable quality, signal integrity, and firmware.
Where can I download the USB2640I-HZH-02 datasheet PDF?
The USB2640i/USB2641i manufacturer data sheet is available from Microchip at the official PDF link on this page. It describes the integrated hub and media-controller architecture, electrical characteristics, package information, and ordering codes. For the exact USB2640I-HZH-02 configuration, verify the order-code suffix, firmware revision, package, and all pin connections against the manufacturer documentation before releasing a PCB.
Where can I find the USB2640I-HZH-02 pinout?
Use the pin-description table and package drawing in the Microchip USB2640i/USB2641i data sheet DS00001948B for the authoritative USB2640I-HZH-02 pin assignments. The component is a 48-pin VQFN with an exposed pad, so the exposed pad is a thermal and electrical connection rather than an ordinary numbered signal pin. Do not infer connectivity from the package image alone.
Is USB2640I-HZH-02 suitable for industrial equipment?
The USB2640I-HZH-02 is designated for industrial-temperature operation, making it the appropriate ordering option for industrial equipment within its specified operating limits. The Microchip ordering documentation identifies the HZH package and 02 firmware revision for the USB2640i family. System qualification should still confirm temperature range, transient behavior, EMC requirements, and long-term availability for the finished product.
What is the difference between USB2640I-HZH-02 and USB2640-HZH-02?
The primary documented distinction is the temperature grade: USB2640I-HZH-02 is the industrial-temperature member, while USB2640-HZH-02 is the non-industrial member of the same 48-QFN family. Both use the HZH package designation and share the core USB2640 hub and flash-controller architecture. For an industrial deployment, USB2640I-HZH-02 is the appropriate choice.
Can USB2641-HZH-02 replace USB2640I-HZH-02?
The USB2641-HZH-02 belongs to the closely related USB2640/USB2641 family and appears as a cross-reference candidate, but replacement must be confirmed at the pin, firmware, and supported-media level. The USB2640I-HZH-02 uses a 48-QFN industrial configuration, while USB2641-HZH-02 is a non-industrial ordering option. Review the manufacturer data sheet and complete board-level validation before substituting it.
What is the best drop-in replacement for USB2640I-HZH-02?
No universally confirmed drop-in replacement can be named without reviewing the complete board requirements and firmware. The closest documented family options are USB2640-HZH-02, USB2641-HZH-02, and USB2641I-HZH-02, all associated with the 48-pin QFN USB2640/USB2641 family. USB2640-HZH-02 changes the temperature grade, so it is not a like-for-like industrial replacement without approval.
When should I choose USB2640I-HZH-02 over USB2640-HZH-02?
Choose USB2640I-HZH-02 when the product requires the industrial-temperature USB2640 configuration. USB2640-HZH-02 provides the same named HZH package family for non-industrial temperature applications, but it does not carry the industrial-temperature designation of the target part. Consider the USB2641 variants only after checking their supported media, pin behavior, firmware, and validation requirements.
Is USB2640I-HZH-02 suitable for desktop and notebook USB expansion?
Yes, USB2640I-HZH-02 fits desktop and notebook designs that need two downstream USB 2.0 ports and integrated flash-media access. The Microchip family supports low-speed, full-speed, and high-speed USB devices and is offered in a compact 48-pin VQFN. Industrial-temperature qualification also allows its use in equipment operating beyond consumer-temperature environments.
Where can I buy USB2640I-HZH-02 and check its current price?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and lead time for USB2640I-HZH-02. The exact suffix is important because USB2640-HZH-02, USB2641-HZH-02, and USB2640I-HZH-02-TR are different ordering configurations. A purchasing inquiry should include the full USB2640I-HZH-02 manufacturer part number.
What is the lead time for USB2640I-HZH-02?
Request the current lead time and stock allocation through the Request a Quote form on this page. Lead time can vary with order quantity, package form, firmware revision, manufacturing conditions, and supply-chain status. Confirm the quoted configuration as USB2640I-HZH-02 rather than the non-industrial USB2640-HZH-02 or the tape-and-reel -TR ordering code.
Is USB2640I-HZH-02 in stock?
Current inventory for USB2640I-HZH-02 should be confirmed through the Request a Quote form on this page. Include the required quantity, target packaging, and project schedule in the request. Because USB2640I-HZH-02 and USB2640I-HZH-02-TR share the core device but use different order packaging, specify the complete base MPN to avoid an unintended substitution.
What are the key specifications engineers should know about USB2640I-HZH-02?
USB2640I-HZH-02 integrates a two-port Hi-Speed USB 2.0 hub and a flash media reader/writer in a 3.3 V industrial-temperature device. It supports low-speed, full-speed, and high-speed USB operation, reports average sustained transfer rates exceeding 35 MB/s, and uses a 48-pin, 7 x 7 mm VQFN with an exposed pad. These characteristics define its suitability for USB expansion and removable-storage designs.

工程参考数据: USB2640I-HZH-02 ——对比、设计指导和合规信息。

选型指南

Choose USB2640I-HZH-02 when the design needs a compact, 3.3 V USB 2.0 controller that combines two downstream Hi-Speed USB ports with an integrated flash-media reader and writer in an industrial-temperature configuration. It is particularly suitable for industrial panels, embedded systems, test equipment, and portable data-acquisition products where sustained media transfer rates exceeding 35 MB/s are useful. USB2640-HZH-02 shares the core family architecture but lacks the industrial-temperature designation, making it a candidate only when that grade change is acceptable. Consider USB2641-HZH-02 or USB2641I-HZH-02 when their supported-media and firmware behavior better matches the product, but confirm every pin and function against the manufacturer data sheet. USB2642T-I/ML may be considered only after confirming its package, pin compatibility, and media-controller behavior. In every substitution, preserve the 48-QFN footprint, exposed-pad connection, USB signal routing, power design, and validated firmware configuration.

与替代料对比

参数 本产品 USB2640-HZH-02 USB2641-HZH-02 USB2641I-HZH-02 USB2642T-I/ML
Package 48-QFN (7x7) 48-QFN (7x7) - same 48-QFN (7x7) - same 48-QFN (7x7) - same 48-QFN (7x7) - same
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Device Function USB 2.0 flash media controller and two-port hub controller USB 2.0 flash media controller and two-port hub controller Related USB 2.0 hub and flash-controller family Industrial USB 2.0 hub and flash-controller family Related USB controller family
Temperature Grade Industrial temperature Non-industrial HZH configuration Non-industrial HZH configuration Industrial configuration Industrial -I configuration
USB Version USB 2.0 USB 2.0 USB 2.0 USB 2.0 USB 2.0 family
Ordering Suffix HZH-02 HZH-02 HZH-02 HZH-02 T-I/ML

关键差异点

  • Industrial-temperature USB2640 configuration (对比 USB2640-HZH-02)
  • Single-chip hub and flash-controller integration (对比 USB2642T-I/ML)
  • Compact 48-QFN integration (对比 USB2641-HZH-02)

设计说明

Route the USB 2.0 differential pairs as controlled-impedance, tightly coupled traces and minimize the distance between the USB2640I-HZH-02 and its external connector or transceiver. Follow the manufacturer reference layout for the upstream and downstream pairs. Avoid vias, stubs, plane splits, and right-angle routing where they can degrade high-speed signal integrity. Keep the clock circuitry and decoupling network close to their associated device pins.

Connect the exposed pad to a low-impedance ground plane with multiple thermal vias and adequate copper area, following the Microchip package guidance. The exposed pad is part of the device's thermal and electrical construction and should not be left floating. Estimate pad heating from the 3.3 V supply current, USB transceiver activity, and connected-load conditions, then confirm that the PCB temperature rise remains suitable for the industrial operating environment.

Provide a stable 3.3 V supply with low-noise decoupling at the device and adequate transient response for USB traffic and attached loads. Place bulk and high-frequency decoupling according to the manufacturer reference circuit, observing capacitor placement guidance. Validate startup, hot-plug, suspend, and bus-powered load transitions at the system level because cable and peripheral behavior can create current steps not represented by the controller's nominal operating condition.

Do not interchange the full ordering suffixes without review. USB2640I-HZH-02, USB2640-HZH-02, USB2641-HZH-02, USB2640I-HZH-02-TR, and USB2642T-I/ML can differ in temperature grade, family configuration, firmware, or shipping form. The -TR code is not automatically a separate electrical design. Before substitution, compare the complete manufacturer data sheets, pin table, supported-media list, exposed-pad connections, and firmware requirements.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Yes
无卤
Unknown
冲突矿物
Unknown

The Microchip ordering documentation identifies the HZH package as lead-free and RoHS compliant. No specific REACH, halogen-free, AEC-Q100, or conflict-minerals statement was established for the exact ordering configuration.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

usb2640i hzh 02 USB2640I-HZH-02 datasheet USB2640I-HZH-02 datasheet pdf USB2640I-HZH-02 pinout USB2640I-HZH-02 equivalent USB2640I-HZH-02 replacement USB2640I-HZH-02 cross reference USB2640I-HZH-02 vs USB2640-HZH-02 USB2640I-HZH-02 vs USB2641-HZH-02 USB2640I-HZH-02 48-QFN USB2640I-HZH-02 price USB2640I-HZH-02 stock Microchip USB2640I-HZH-02 USB2640I-HZH-02 flash media controller USB2640I-HZH-02 USB hub controller

相关元器件 & 术语

Microchip Technology USB2640I-HZH-02 USB2640-HZH-02 USB2641-HZH-02 USB2641I-HZH-02 USB2642T-I/ML USB 2.0 Hi-Speed USB USB hub controller flash media controller flash media reader/writer USB interface IC USB expansion USB low-speed USB full-speed USB high-speed transfer rate 3.3 V supply industrial temperature 48-QFN VQFN exposed pad surface mount RoHS lead-free package
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情