USB2640I-HZH-02 - USB 2.0 Hub & Flash Controller | Microchip
MPN: USB2640I-HZH-02 ✓ AktifUSB2640I-HZH-02 Ringkasan
A USB hub controller is an interface integrated circuit that expands one USB host connection into multiple downstream ports. The USB2640 family combines this hub function with a multi-format flash media controller, placing USB expansion and removable-storage access in one device. This integration can simplify desktop, notebook, industrial, and embedded system designs that need both peripheral connectivity and memory-card support.
The device supports USB 2.0 low-speed, full-speed, and high-speed operation. Its two-port Hi-Speed hub controller expands USB connectivity, while the integrated flash media controller supports reader and writer operation. The manufacturer data sheet reports average sustained transfer rates exceeding 35 MB/s, making the part suitable for storage workloads that require substantially more bandwidth than USB full-speed operation.
USB2640I-HZH-02 is identified for industrial-temperature operation and operates from a 3.3 V supply. The 48-pin, 7 x 7 mm QFN package uses an exposed pad for low-profile PCB integration and thermal dissipation. The HZH designation identifies the package configuration, while the final 02 code identifies the internal ROM firmware revision level according to the Microchip ordering documentation.
Typical applications include USB port expansion in desktop and notebook computers, industrial operator interfaces, multifunction panels, embedded control systems, and equipment that reads or writes flash media. Combining a hub controller and media controller reduces the need for separate USB-to-flash bridge devices when the board layout, firmware, and exposed-pad thermal design meet the device requirements.
Designers should follow the manufacturer reference schematic for high-speed USB routing, impedance control, crystal and decoupling placement, and exposed-pad connection. The 3.3 V supply must provide adequate transient current for the hub and attached USB loads, while the thermal design must dissipate regulator and interface heat without exceeding device temperature limits.
This page consolidates the USB2640I-HZH-02 device identity, manufacturer specifications, pin-compatible family alternatives, application guidance, and PCB design considerations into a practical engineering reference for evaluating this single-chip USB 2.0 hub and flash-controller solution.
Pilihan pengganti yang segera untuk USB2640I-HZH-02 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera USB2640I-HZH-02 (sama faktor bentuk dan kaki) — berbeza dalam Package, Product Type, Lead-Free Status, Mounting Type, RoHS Status.
USB2640-HZH-02
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →USB2641-HZH-02
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →USB2641I-HZH-02
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →USB2642T-I/ML
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →USB2640I-HZH-02 Spesifikasi
| Device Type | USB 2.0 flash media controller and two-port USB hub controller |
| USB Specification | USB 2.0 |
| Supported USB Speeds | Low-speed, full-speed, and high-speed |
| Number of USB Hub Ports | 2 ports |
| Average Sustained Transfer Rate | Exceeding 35 MB/s |
| Tegangan Pemberi Arus | 3.3 V |
| Temperature Grade | Industrial temperature |
| Kemasan | 48-pin VQFN with exposed pad |
| Package Dimensions | 7 x 7 mm |
| Jenis Pemasangan | Surface mount |
| Lead-Free Status | Lead-free package |
| RoHS Compliance | RoHS compliant |
| Integrated Functions | USB hub and flash media reader/writer |
| Media Support | Multi-format flash media |
| Order Code HZH | 48-pin QFN package configuration |
| Order Code 02 | Internal ROM firmware revision level |
| USB Host Connection | Upstream USB host interface |
| Port Expansion | One upstream connection with two downstream USB 2.0 hub ports |
Panduan Konfigurasi Pin USB2640I-HZH-02 7 x 7 mm
Konfigurasi pin untuk USB2640I-HZH-02 (7 x 7 mm pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk USB2640I-HZH-02.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
USB2640I-HZH-02 patut untuk 6 aplikasis: Desktop and Notebook USB Port Expansion, Industrial Operator Panels, Embedded Flash Media Access, Multifunction Self-Service Terminals, Test and Measurement Equipment, Portable Data Acquisition Systems.
Desktop and Notebook USB Port Expansion
The USB2640I-HZH-02 is suitable for desktop and notebook systems that need to expand one upstream USB host connection into two downstream Hi-Speed USB 2.0 ports while retaining integrated flash-media access. Its two-port hub architecture reduces the need for a separate USB hub, while the reported sustained transfer rate exceeding 35 MB/s supports demanding removable-storage workflows. The 48-pin, 7 x 7 mm VQFN also supports compact board integration. Designers should follow the manufacturer reference layout for controlled-impedance USB routing, supply decoupling, crystal placement, and exposed-pad thermal vias.
Disebarkan
Industrial Operator Panels
Industrial operator panels often need several USB peripherals plus local removable storage, yet panel space and thermal dissipation are constrained. USB2640I-HZH-02 combines two Hi-Speed USB 2.0 downstream ports and a flash reader/writer in one industrial-temperature component. The integrated approach can reduce component count compared with separate hub and media-controller solutions. Its sustained transfer performance exceeding 35 MB/s is beneficial for transferring maintenance logs, recipes, and machine data. The exposed thermal pad must be connected to a low-impedance ground plane and copper area with multiple thermal vias to maintain reliable operation.
Disebarkan
Embedded Flash Media Access
The USB2640I-HZH-02 fits embedded systems that expose removable flash storage through a USB host interface. Its integrated media reader and writer can provide sustained transfer rates exceeding 35 MB/s while also offering two downstream USB 2.0 hub ports for keyboards, service tools, or data-transfer devices. This combination simplifies the USB connectivity portion of a controller board compared with using separate media and hub ICs. Firmware support, media-format compatibility, and connector behavior should be verified against the manufacturer documentation before production.
Disebarkan
Multifunction Self-Service Terminals
Self-service terminals can benefit from the USB2640I-HZH-02 because one controller provides both card-reader access and two USB expansion ports. Payment accessories, identification readers, printers, or removable media can be connected without implementing independent USB controllers at each interface. The device supports USB low-speed, full-speed, and high-speed operation, allowing it to work with both low-bandwidth peripherals and high-speed storage. Industrial-temperature operation supports deployments in kiosks and self-service equipment. Designers should reserve careful routing space for high-speed differential pairs and provide short, properly terminated USB connections.
Disebarkan
Test and Measurement Equipment
Test and measurement instruments frequently need removable media for logging, calibration files, and field upgrades alongside external USB peripherals. The USB2640I-HZH-02 provides integrated flash-media access plus two Hi-Speed USB 2.0 hub ports, allowing one upstream host connection to serve several device functions. Sustained transfer rates exceeding 35 MB/s can accelerate large log transfers when the connected media and host system support comparable performance. The 3.3 V device requires a quiet supply arrangement, while the exposed pad should be treated as both a thermal feature and a carefully designed return path.
Disebarkan
Portable Data Acquisition Systems
Portable data-acquisition equipment can use the USB2640I-HZH-02 to combine direct media exchange with expansion for sensors, service cables, or external storage. The two-port Hi-Speed USB hub supports multiple peripheral roles, while the integrated flash reader and writer provides a path for importing recorded data or exporting configuration files. The controller's reported sustained transfer capability exceeding 35 MB/s helps reduce transfer delays during field operations. Industrial-temperature suitability makes the device relevant to mobile equipment exposed to variable ambient conditions, although the complete enclosure, supply design, and USB cable qualification remain system responsibilities.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk USB2640I-HZH-02 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | USB2640-HZH-02 | USB2641-HZH-02 | USB2641I-HZH-02 | USB2642T-I/ML |
|---|---|---|---|---|---|
| Package | 48-QFN (7x7) | 48-QFN (7x7) - same | 48-QFN (7x7) - same | 48-QFN (7x7) - same | 48-QFN (7x7) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Function | USB 2.0 flash media controller and two-port hub controller | USB 2.0 flash media controller and two-port hub controller | Related USB 2.0 hub and flash-controller family | Industrial USB 2.0 hub and flash-controller family | Related USB controller family |
| Temperature Grade | Industrial temperature | Non-industrial HZH configuration | Non-industrial HZH configuration | Industrial configuration | Industrial -I configuration |
| USB Version | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 family |
| Ordering Suffix | HZH-02 | HZH-02 | HZH-02 | HZH-02 | T-I/ML |
Penyeberangsung Jelas
- Industrial-temperature USB2640 configuration (vsUSB2640-HZH-02)
- Single-chip hub and flash-controller integration (vsUSB2642T-I/ML)
- Compact 48-QFN integration (vsUSB2641-HZH-02)
Catatan Desain
Route the USB 2.0 differential pairs as controlled-impedance, tightly coupled traces and minimize the distance between the USB2640I-HZH-02 and its external connector or transceiver. Follow the manufacturer reference layout for the upstream and downstream pairs. Avoid vias, stubs, plane splits, and right-angle routing where they can degrade high-speed signal integrity. Keep the clock circuitry and decoupling network close to their associated device pins.
Connect the exposed pad to a low-impedance ground plane with multiple thermal vias and adequate copper area, following the Microchip package guidance. The exposed pad is part of the device's thermal and electrical construction and should not be left floating. Estimate pad heating from the 3.3 V supply current, USB transceiver activity, and connected-load conditions, then confirm that the PCB temperature rise remains suitable for the industrial operating environment.
Provide a stable 3.3 V supply with low-noise decoupling at the device and adequate transient response for USB traffic and attached loads. Place bulk and high-frequency decoupling according to the manufacturer reference circuit, observing capacitor placement guidance. Validate startup, hot-plug, suspend, and bus-powered load transitions at the system level because cable and peripheral behavior can create current steps not represented by the controller's nominal operating condition.
Do not interchange the full ordering suffixes without review. USB2640I-HZH-02, USB2640-HZH-02, USB2641-HZH-02, USB2640I-HZH-02-TR, and USB2642T-I/ML can differ in temperature grade, family configuration, firmware, or shipping form. The -TR code is not automatically a separate electrical design. Before substitution, compare the complete manufacturer data sheets, pin table, supported-media list, exposed-pad connections, and firmware requirements.
Maklumat Kesediaan
The Microchip ordering documentation identifies the HZH package as lead-free and RoHS compliant. No specific REACH, halogen-free, AEC-Q100, or conflict-minerals statement was established for the exact ordering configuration.