Microchip Technology

VSC8641XKO-03 - 1-Port Gigabit Ethernet PHY | Microchip

料号: VSC8641XKO-03 ✗ 停产
1.2 V, 2.5 V, or 3.3 V Vdss 100-lead LQFP, 12 mm x 12 mm, 0.55 mm pitch Package
最小起订量: 1 |

VSC8641XKO-03 概述

The Microchip Technology VSC8641XKO-03 is a single-port Gigabit Ethernet copper PHY supporting GMII and RGMII interfaces in a 100-lead low-profile quad flat package. It is designed for industrial-temperature equipment operating from -40 C to +85 C and uses a 1.2 V, 2.5 V, or 3.3 V supply arrangement indicated for this device family. The package is a lead-free 12 mm by 12 mm component with a 0.55 mm pitch.

A Gigabit Ethernet physical layer, commonly called a GbE PHY, converts between digital data and signals traveling over twisted-pair copper cabling. Within a network interface hierarchy, the VSC8641XKO-03 is a physical-layer device that sits below the link-layer MAC controller. Its GMII and RGMII interfaces connect the PHY to a network controller, while the copper-side transceiver provides the physical signaling required for 1000BASE-T Ethernet.

The part is identified as a 1-port GbE PHY with GMII and RGMII support. A 12 mm by 12 mm lead-free package permits compact single-port designs without using a larger heat-spreader package. The industrial-temperature marking supports designs deployed in factory equipment, industrial controls, telecommunications equipment, and test systems where extended temperature capability may be required.

The VSC8641 family is documented as a highly integrated, low-power Gigabit Ethernet PHY solution. Integration reduces the number of external components required around the MAC interface and copper transceiver, while support for both GMII and RGMII lets the same PHY family serve controllers with parallel or reduced-pin serial interfaces. Exact clock, power-consumption, and link-performance figures should be taken from the VSC8641 manufacturer datasheet.

Typical applications include industrial Ethernet switches, network interface cards, embedded Linux systems, factory automation controllers, telecommunications access equipment, and copper media converters. The PHY is most appropriate when a system already contains a compatible Ethernet MAC and only the physical layer, line drivers, receiver, and copper interface are required.

The Microchip product page lists the VSC8641 as not recommended for new designs. Confirm the exact orderable suffix, PCB footprint, reference clock requirements, magnetics selection, and interface timing against the manufacturer datasheet before committing a new layout. Because the PHY connects to external magnetics and a line driver, use the manufacturer reference schematic and layout guidance for trace matching, grounding, and isolation spacing.

This page organizes the package, interface, lifecycle, and sourcing information for VSC8641XKO-03, compares the closely related family members, and provides application-focused engineering guidance. It also distinguishes true pin-compatible replacements from devices that are only functional alternatives requiring a different package or board redesign.

直接替换替代料: VSC8641XKO-03 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: VSC8641XKO-03 (相同外形与封装尺寸) ——差异在于 Host Interface, Package, Product Type.

Microchip Technology
对比 VSC8641XKO-03 →
Microchip Technology
Host Interface: GMII, RGMII
Package: 100-LQFP
Product Type: Gigabit Ethernet PHY transceiver
对比 VSC8641XKO-03 →

VSC8641XKO

✅ 直接替换
Microchip Technology
📦 100-LQFP
Gigabit Ethernet PHY transceiver · 1/1 · 1/1 transceiver · 1 Gb/s · 2.5 V, 3.3 V · GMII, RGMII · 100-LQFP · Surface mount

联系询价

查看数据手册 →

VSC8641XKO-03 规格参数

Product Type 1-port Gigabit Ethernet copper PHY
Ethernet Standard Support Gigabit Ethernet (GbE)
Number of Ports 1 port
Host Interface GMII and RGMII
封装 100-lead LQFP, 12 mm x 12 mm, 0.55 mm pitch
Package Type HLFQFP, low-profile fine-pitch quad flat package
工作温度范围 -40 C to +85 C
Supply Voltage Options 1.2 V, 2.5 V, or 3.3 V
Lead-Free Status Lead-free
Lifecycle Recommendation Not Recommended for New Designs
安装类型 Surface mount
Integrated Transceivers 1
Maximum Gigabit Ethernet Line Rate 1000 Mbps
Physical Layer Standard 1000BASE-T copper PHY
Automotive Qualification Not Qualified

VSC8641XKO-03 hlfqfp, low-profile fine-pitch quad flat package 引脚配置指南

VSC8641XKO-03(hlfqfp, low-profile fine-pitch quad flat package 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

VSC8641XKO-03 的 hlfqfp, low-profile fine-pitch quad flat package 封装引脚图

暂无详细引脚数据: VSC8641XKO-03.

请参阅 数据手册 以查看完整引脚配置。

典型应用

VSC8641XKO-03 适用于 6 应用s: Industrial Ethernet Switch Ports, Factory Automation Controllers, Embedded Linux Network Appliances, Telecommunications Access Equipment, Gigabit Ethernet Media Converters, Network Interface Cards and Embedded Boards.

🏭

Industrial Ethernet Switch Ports

The VSC8641XKO-03 fits a single-port copper Ethernet interface in an industrial switch or terminal block because it combines GMII and RGMII connectivity with an industrial-temperature range of -40 C to +85 C. Place the PHY beside the MAC controller and route its copper-side signals through the isolation and magnetics section shown in the manufacturer reference design. The 100-lead LQFP footprint requires careful escape routing between its 0.55 mm pitch leads, while the available supply options of 1.2 V, 2.5 V, or 3.3 V support mixed-voltage Ethernet controller architectures.

🏭

Factory Automation Controllers

The VSC8641XKO-03 can provide the copper Gigabit Ethernet physical layer for PLCs, machine controllers, and remote I/O gateways that require a deterministic wired network connection. Its GMII interface suits a controller with a wide parallel MAC interface, while RGMII reduces interconnect width when board space is constrained. The -40 C to +85 C industrial-temperature range suits controlled enclosures, but designers should follow the manufacturer layout guidance for copper traces, grounding, and magnetics isolation.

🖥️

Embedded Linux Network Appliances

An embedded Linux appliance can use the VSC8641XKO-03 as the Gigabit Ethernet PHY paired with a compatible MAC controller. The choice between GMII and RGMII allows the board to match the host controller's interface density and clocking arrangement. This arrangement reduces the need for a discrete copper transceiver and consolidates the PHY in a 12 mm by 12 mm surface-mount package. Firmware work then focuses on PHY address, auto-negotiation, link-speed, and interface timing configuration.

🌐

Telecommunications Access Equipment

The VSC8641XKO-03 is suitable for a copper access or line-card design that requires one Gigabit Ethernet port with a selectable parallel or reduced-pin serial host interface. Its industrial-temperature operation makes it appropriate for indoor telecommunications equipment where enclosure temperatures can exceed consumer-grade limits. The PHY should be placed near the board edge and the network magnetics to minimize copper-interface trace length. Supply partitioning, reference clocks, and termination must follow the manufacturer application circuit.

🔧

Gigabit Ethernet Media Converters

A copper-to-fiber or copper-to-copper media converter can use the VSC8641XKO-03 for its Gigabit Ethernet copper side, with a separate interface handling the other link. RGMII reduces host-side board area when converter logic uses a compact controller, whereas GMII provides a wider parallel bus for simpler timing distribution. The industrial temperature rating supports enclosure deployments in factories and telecommunications rooms. The final design must budget the 100-lead footprint, PHY supply rails, magnetics, and isolation components.

💻

Network Interface Cards and Embedded Boards

The VSC8641XKO-03 can serve as the copper PHY on a network interface card or embedded processing board that already includes an Ethernet MAC. Matching the MAC to GMII or RGMII avoids wasting board area on unused parallel signals and helps keep the layout compact. Because this is a 0.55 mm pitch, 100-lead package, fanout and ground-plane planning are essential for reliable assembly. Designers should also verify controller reference-clock compatibility and the manufacturer's recommended magnetics and termination network.

What is the VSC8641XKO-03?
The VSC8641XKO-03 is a Microchip Technology single-port Gigabit Ethernet copper PHY with GMII and RGMII host interfaces. It is packaged in a 100-lead low-profile quad flat package measuring 12 mm by 12 mm with a 0.55 mm pitch. The device is marked for industrial-temperature operation from -40 C to +85 C and is listed by the manufacturer as not recommended for new designs.
Where can I download the VSC8641XKO-03 datasheet PDF?
The VSC8641 manufacturer datasheet is available through the linked documentation copy on DigiKey and through the Microchip VSC8641 product page. Use the pin-description table, electrical characteristics, and application diagrams in that document when assigning the 100 package leads. The Octopart datasheet entry also links to the latest VSC8641 documentation for the -03 ordering suffix.
Where can I find the VSC8641XKO-03 pinout?
The pinout is documented in the VSC8641 manufacturer datasheet under the 100-lead package connection information. The verified listing data identifies the device as a 100-LQFP package, but individual signal names are not reproduced on the product page. Assign PCB tracks from the pin-description table and package drawing in the datasheet rather than relying on generic LQFP numbering.
Is VSC8641XKO-03 suitable for industrial applications?
Yes, the VSC8641XKO-03 is identified as an industrial-temperature part with a specified range of -40 C to +85 C. That range suits factory automation, industrial controllers, telecommunications access equipment, and embedded network appliances. The manufacturer nevertheless marks the VSC8641 family as not recommended for new designs, so new industrial programs should verify availability and lifecycle implications before committing.
What is the difference between VSC8641XKO and VSC8641XKO-03?
VSC8641XKO-03 is the -03 ordering suffix of the VSC8641 single-port Gigabit Ethernet PHY family. The family-level interface description is the same: one Gigabit Ethernet port with GMII and RGMII support in the 100-lead lead-free package. The available catalog information identifies the -03 version as industrial temperature and the base suffix as a related catalog listing, but the exact internal differences must be confirmed in the ordering information table.
What can replace VSC8641XKO-03?
The closest drop-in replacement identified for the 100-lead VSC8641XKO footprint is the base VSC8641XKO catalog variant. The product-change notice identifies VSC8501XML-03 as an equivalent product in a different package, so it is not a drop-in replacement and requires a PCB redesign. Verify temperature grade, interface timing, and lifecycle status before substituting any related MPN into an existing design.
Is VSC8501XML-03 a drop-in replacement for VSC8641XKO-03?
No. The manufacturer product-change notice describes VSC8501XML-03 as an equivalent product in a different package. It can serve the same Gigabit Ethernet design role, but it cannot be soldered onto the same 100-lead VSC8641XKO land pattern. Treat it as a board-level migration option requiring footprint, pin assignment, interface, and schematic verification rather than a drop-in substitution.
When should I choose VSC8641XKO-03 instead of a different Gigabit Ethernet PHY?
Choose VSC8641XKO-03 when an existing 100-lead PCB already implements its GMII or RGMII connection and copper-side circuitry, and when the -40 C to +85 C industrial temperature grade is required. It is a better fit than a functionally similar but differently packaged PHY when a no-breadboard redesign is essential. For new designs, the not-recommended-for-new-designs status makes an actively supported PHY a more practical starting point.
Where can I buy VSC8641XKO-03?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and lead time for VSC8641XKO-03. Quote-first fulfillment is appropriate for this lifecycle-status part because availability and lead time can vary with the number of pieces requested. Request a written order confirmation before scheduling a production build around the part.
What is the price of VSC8641XKO-03?
The current VSC8641XKO-03 price is shown through the Request a Quote form on this page. Pricing for a not-recommended-for-new-designs integrated circuit can depend strongly on order quantity, traceability, and remaining distributor inventory. Submit the required quantity and target delivery date with the request so the quotation reflects the intended procurement plan.
What is the lead time for VSC8641XKO-03?
Request the current lead time through the Request a Quote form on this page. Because Microchip lists the VSC8641 family as not recommended for new designs, production planning should allow the supplier to confirm allocation rather than assuming continuous factory supply. Provide your required quantity, date code preference, and target assembly date when submitting the request.
Is VSC8641XKO-03 in stock?
Current stock status for VSC8641XKO-03 is handled through the Request a Quote form on this page. Because the manufacturer marks the family as not recommended for new designs, inventory can move in limited quantities rather than being replenished continuously. Ask the supplier to confirm the available quantity and whether any offered units are new, factory-sealed, or factory-reclaimed before approving the order.
What are the key specifications of VSC8641XKO-03?
The key VSC8641XKO-03 specifications are one Gigabit Ethernet copper port, GMII and RGMII host interfaces, a 100-lead 12 mm by 12 mm LQFP package with 0.55 mm pitch, and industrial-temperature operation from -40 C to +85 C. The device also supports 1.2 V, 2.5 V, or 3.3 V supply arrangements. Detailed timing, current, and link specifications should be taken from the VSC8641 manufacturer datasheet.
VSC8641XKO-03 vs VSC8601XKN: which one fits an existing board?
VSC8641XKO-03 fits a board laid out for the 100-lead VSC8641XKO package, while VSC8601XKN uses a different package and is not a direct footprint match. Both belong to the same single-port Gigabit Ethernet PHY family, but board compatibility depends on package, lead count, signal assignment, and interface configuration. Use VSC8641XKO-03 for an existing 100-lead design and treat VSC8601XKN as a redesign-level alternative.
What is the best Microchip equivalent for VSC8641XKO-03?
The best Microchip-related equivalent identified for an existing VSC8641XKO board is the base VSC8641XKO listing, which uses the same 100-lead package family. The product-change notice also identifies VSC8501XML-03 as an equivalent in a different package, making it suitable only for a board redesign. The -03 suffix must be checked for temperature grade and ordering conditions before any substitution is approved.
Does VSC8641XKO-03 support RGMII?
Yes, the VSC8641XKO-03 supports both GMII and RGMII host interfaces. GMII provides a wider parallel data bus, while RGMII reduces the number of interface signals and is commonly used with higher-speed Ethernet controllers. Interface mode, clock requirements, and I/O timing must be configured in accordance with the application information in the VSC8641 manufacturer datasheet.

工程参考数据: VSC8641XKO-03 ——对比、设计指导和合规信息。

选型指南

Select VSC8641XKO-03 when maintaining an existing 100-lead Gigabit Ethernet PHY design, especially an industrial-temperature product operating from -40 C to +85 C. The -03 suffix, GMII and RGMII interfaces, and 12 mm by 12 mm lead-free package support direct use in qualified hardware. The base VSC8641XKO is the closest same-footprint option, but verify its exact temperature grade and ordering conditions first. Do not select VSC8501XML-03 for a drop-in upgrade because it uses a different package; consider it only when a complete board redesign and signal re-verification are acceptable. For new products without an existing VSC8641 layout, evaluate an actively supported PHY because Microchip marks the VSC8641 family as not recommended for new designs.

与替代料对比

参数 本产品 VSC8641XKO
Brand Microchip Technology Microchip Technology
Package 100-LQFP, 12 mm x 12 mm, 0.55 mm pitch 100-LQFP, 12 mm x 12 mm, 0.55 mm pitch
Port Count 1 port 1 port
Ethernet Function Gigabit Ethernet copper PHY Gigabit Ethernet copper PHY
Host Interfaces GMII and RGMII GMII and RGMII
Ordering Suffix -03 Base suffix
Supply Voltage Options 1.2 V, 2.5 V, or 3.3 V 1.2 V, 2.5 V, or 3.3 V
Lead-Free Status Lead-free Lead-free

关键差异点

  • Existing 100-lead board compatibility (对比 VSC8501XML-03)
  • Industrial-temperature ordering option (对比 VSC8641XKO)
  • Host-interface flexibility (对比 VSC8501XML-03)

设计说明

Place the VSC8641XKO-03 near the board edge and route the copper-side signals directly toward the isolation components and magnetics. Follow the VSC8641 manufacturer application layout for trace geometry, component spacing, and return paths. Because this is a 100-lead package with 0.55 mm pitch, verify fanout and assembly clearance before releasing the layout, particularly where the thermal pad or exposed ground structure requires a controlled pad and via pattern.

Build the supply network from the manufacturer's application circuit, including the required 1.2 V, 2.5 V, or 3.3 V rail arrangement and the specified bypass capacitors at the PHY pins. Keep switching regulators and their inductors away from the high-speed GMII or RGMII traces to limit supply noise coupling into the data path. Decouple each supply domain locally and validate rail sequencing and startup behavior with the selected MAC controller.

Do not treat VSC8501XML-03 or another functionally similar Gigabit Ethernet PHY as a drop-in substitute for VSC8641XKO-03 without checking the package. The product-change notice identifies VSC8501XML-03 as equivalent in a different package, so its leads, land pattern, and interface assignments differ. For a redesign, also compare clocking, RGMII voltage levels, magnetics, copper trace layout, and the manufacturer support status for both devices.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Yes
无卤
Unknown
冲突矿物
Unknown

The component listing identifies a lead-free package and states that the automotive qualification is Not Qualified. No explicit RoHS, REACH, halogen-free, or conflict-minerals declarations are stated in the available product information.

数据核验日期: 2026-11-11 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

VSC8641XKO-03 datasheet VSC8641XKO-03 specifications VSC8641XKO-03 pinout VSC8641XKO-03 datasheet pdf VSC8641XKO-03 equivalent VSC8641XKO-03 drop-in replacement VSC8641XKO-03 cross reference VSC8641XKO-03 vs VSC8501XML-03 VSC8641XKO-03 price VSC8641XKO-03 stock Microchip VSC8641XKO-03 VSC8641XKO-03 footprint VSC8641XKO-03 GMII RGMII VSC8641XKO-03 industrial Ethernet PHY

相关元器件 & 术语

Microchip Technology VSC8641XKO-03 VSC8641XKO VSC8501XML-03 Gigabit Ethernet PHY physical layer GMII RGMII 1000BASE-T copper transceiver Ethernet MAC network magnetics 100-LQFP HLFQFP surface mount industrial temperature lead-free not recommended for new designs Ethernet switch factory automation embedded Linux telecommunications access equipment media converter network interface card
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情