VSC8641XKO-03 - 1-Port Gigabit Ethernet PHY | Microchip
MPN: VSC8641XKO-03 ✗ 停產VSC8641XKO-03 概覽
A Gigabit Ethernet physical layer, commonly called a GbE PHY, converts between digital data and signals traveling over twisted-pair copper cabling. Within a network interface hierarchy, the VSC8641XKO-03 is a physical-layer device that sits below the link-layer MAC controller. Its GMII and RGMII interfaces connect the PHY to a network controller, while the copper-side transceiver provides the physical signaling required for 1000BASE-T Ethernet.
The part is identified as a 1-port GbE PHY with GMII and RGMII support. A 12 mm by 12 mm lead-free package permits compact single-port designs without using a larger heat-spreader package. The industrial-temperature marking supports designs deployed in factory equipment, industrial controls, telecommunications equipment, and test systems where extended temperature capability may be required.
The VSC8641 family is documented as a highly integrated, low-power Gigabit Ethernet PHY solution. Integration reduces the number of external components required around the MAC interface and copper transceiver, while support for both GMII and RGMII lets the same PHY family serve controllers with parallel or reduced-pin serial interfaces. Exact clock, power-consumption, and link-performance figures should be taken from the VSC8641 manufacturer datasheet.
Typical applications include industrial Ethernet switches, network interface cards, embedded Linux systems, factory automation controllers, telecommunications access equipment, and copper media converters. The PHY is most appropriate when a system already contains a compatible Ethernet MAC and only the physical layer, line drivers, receiver, and copper interface are required.
The Microchip product page lists the VSC8641 as not recommended for new designs. Confirm the exact orderable suffix, PCB footprint, reference clock requirements, magnetics selection, and interface timing against the manufacturer datasheet before committing a new layout. Because the PHY connects to external magnetics and a line driver, use the manufacturer reference schematic and layout guidance for trace matching, grounding, and isolation spacing.
This page organizes the package, interface, lifecycle, and sourcing information for VSC8641XKO-03, compares the closely related family members, and provides application-focused engineering guidance. It also distinguishes true pin-compatible replacements from devices that are only functional alternatives requiring a different package or board redesign.
直接替換替代品,適用於 VSC8641XKO-03 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: VSC8641XKO-03 (相同外形與佔位) — 差異在於 Host Interface, Package, Product Type.
VSC8641XKO
✅ 直接替換聯絡詢價
查看資料表 →VSC8641XKO-03 規格
| Product Type | 1-port Gigabit Ethernet copper PHY |
| Ethernet Standard Support | Gigabit Ethernet (GbE) |
| Number of Ports | 1 port |
| Host Interface | GMII and RGMII |
| 封裝 | 100-lead LQFP, 12 mm x 12 mm, 0.55 mm pitch |
| Package Type | HLFQFP, low-profile fine-pitch quad flat package |
| 工作溫度範圍 | -40 C to +85 C |
| Supply Voltage Options | 1.2 V, 2.5 V, or 3.3 V |
| Lead-Free Status | Lead-free |
| Lifecycle Recommendation | Not Recommended for New Designs |
| 安裝類型 | Surface mount |
| Integrated Transceivers | 1 |
| Maximum Gigabit Ethernet Line Rate | 1000 Mbps |
| Physical Layer Standard | 1000BASE-T copper PHY |
| Automotive Qualification | Not Qualified |
VSC8641XKO-03 hlfqfp, low-profile fine-pitch quad flat package 腳位配置指南
VSC8641XKO-03(hlfqfp, low-profile fine-pitch quad flat package 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: VSC8641XKO-03.
請參閱 資料表 以查看完整腳位配置。
典型應用
VSC8641XKO-03 適用於 6 應用s: Industrial Ethernet Switch Ports, Factory Automation Controllers, Embedded Linux Network Appliances, Telecommunications Access Equipment, Gigabit Ethernet Media Converters, Network Interface Cards and Embedded Boards.
Industrial Ethernet Switch Ports
The VSC8641XKO-03 fits a single-port copper Ethernet interface in an industrial switch or terminal block because it combines GMII and RGMII connectivity with an industrial-temperature range of -40 C to +85 C. Place the PHY beside the MAC controller and route its copper-side signals through the isolation and magnetics section shown in the manufacturer reference design. The 100-lead LQFP footprint requires careful escape routing between its 0.55 mm pitch leads, while the available supply options of 1.2 V, 2.5 V, or 3.3 V support mixed-voltage Ethernet controller architectures.
推薦
Factory Automation Controllers
The VSC8641XKO-03 can provide the copper Gigabit Ethernet physical layer for PLCs, machine controllers, and remote I/O gateways that require a deterministic wired network connection. Its GMII interface suits a controller with a wide parallel MAC interface, while RGMII reduces interconnect width when board space is constrained. The -40 C to +85 C industrial-temperature range suits controlled enclosures, but designers should follow the manufacturer layout guidance for copper traces, grounding, and magnetics isolation.
推薦
Embedded Linux Network Appliances
An embedded Linux appliance can use the VSC8641XKO-03 as the Gigabit Ethernet PHY paired with a compatible MAC controller. The choice between GMII and RGMII allows the board to match the host controller's interface density and clocking arrangement. This arrangement reduces the need for a discrete copper transceiver and consolidates the PHY in a 12 mm by 12 mm surface-mount package. Firmware work then focuses on PHY address, auto-negotiation, link-speed, and interface timing configuration.
推薦
Telecommunications Access Equipment
The VSC8641XKO-03 is suitable for a copper access or line-card design that requires one Gigabit Ethernet port with a selectable parallel or reduced-pin serial host interface. Its industrial-temperature operation makes it appropriate for indoor telecommunications equipment where enclosure temperatures can exceed consumer-grade limits. The PHY should be placed near the board edge and the network magnetics to minimize copper-interface trace length. Supply partitioning, reference clocks, and termination must follow the manufacturer application circuit.
推薦
Gigabit Ethernet Media Converters
A copper-to-fiber or copper-to-copper media converter can use the VSC8641XKO-03 for its Gigabit Ethernet copper side, with a separate interface handling the other link. RGMII reduces host-side board area when converter logic uses a compact controller, whereas GMII provides a wider parallel bus for simpler timing distribution. The industrial temperature rating supports enclosure deployments in factories and telecommunications rooms. The final design must budget the 100-lead footprint, PHY supply rails, magnetics, and isolation components.
推薦
Network Interface Cards and Embedded Boards
The VSC8641XKO-03 can serve as the copper PHY on a network interface card or embedded processing board that already includes an Ethernet MAC. Matching the MAC to GMII or RGMII avoids wasting board area on unused parallel signals and helps keep the layout compact. Because this is a 0.55 mm pitch, 100-lead package, fanout and ground-plane planning are essential for reliable assembly. Designers should also verify controller reference-clock compatibility and the manufacturer's recommended magnetics and termination network.
推薦
推薦產品摘要
工程參考資料,適用於 VSC8641XKO-03 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | VSC8641XKO |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 100-LQFP, 12 mm x 12 mm, 0.55 mm pitch | 100-LQFP, 12 mm x 12 mm, 0.55 mm pitch |
| Port Count | 1 port | 1 port |
| Ethernet Function | Gigabit Ethernet copper PHY | Gigabit Ethernet copper PHY |
| Host Interfaces | GMII and RGMII | GMII and RGMII |
| Ordering Suffix | -03 | Base suffix |
| Supply Voltage Options | 1.2 V, 2.5 V, or 3.3 V | 1.2 V, 2.5 V, or 3.3 V |
| Lead-Free Status | Lead-free | Lead-free |
主要差異化特點
- Existing 100-lead board compatibility (對比VSC8501XML-03)
- Industrial-temperature ordering option (對比VSC8641XKO)
- Host-interface flexibility (對比VSC8501XML-03)
設計說明
Place the VSC8641XKO-03 near the board edge and route the copper-side signals directly toward the isolation components and magnetics. Follow the VSC8641 manufacturer application layout for trace geometry, component spacing, and return paths. Because this is a 100-lead package with 0.55 mm pitch, verify fanout and assembly clearance before releasing the layout, particularly where the thermal pad or exposed ground structure requires a controlled pad and via pattern.
Build the supply network from the manufacturer's application circuit, including the required 1.2 V, 2.5 V, or 3.3 V rail arrangement and the specified bypass capacitors at the PHY pins. Keep switching regulators and their inductors away from the high-speed GMII or RGMII traces to limit supply noise coupling into the data path. Decouple each supply domain locally and validate rail sequencing and startup behavior with the selected MAC controller.
Do not treat VSC8501XML-03 or another functionally similar Gigabit Ethernet PHY as a drop-in substitute for VSC8641XKO-03 without checking the package. The product-change notice identifies VSC8501XML-03 as equivalent in a different package, so its leads, land pattern, and interface assignments differ. For a redesign, also compare clocking, RGMII voltage levels, magnetics, copper trace layout, and the manufacturer support status for both devices.
合規資訊
The component listing identifies a lead-free package and states that the automotive qualification is Not Qualified. No explicit RoHS, REACH, halogen-free, or conflict-minerals declarations are stated in the available product information.