WM8915ECSN/R - 24-Bit 48kHz Audio Codec | Cirrus Logic
料号: WM8915ECSN/R ✗ 停产WM8915ECSN/R 概述
An audio codec is a mixed-signal interface IC that converts digital audio data into an analog output and can also manage the corresponding audio signal path. Within the broader semiconductor hierarchy, the WM8915ECSN/R belongs to the audio codec family, integrates into interface ICs, and ultimately serves as a signal-processing and audio-conversion component within portable and embedded electronic systems.
The 24-bit digital audio format provides a high-resolution representation of sound, while the 48 kHz sampling rate supports common consumer-audio rates used in voice, multimedia, and compact audio products. The I2S interface connects the codec to a digital audio processor through a serial data link, clock, and word-select signals. Its surface-mount CSP package supports compact board layouts where component height and area are important.
The WM8915ECSN/R is categorized as a one-function CMOS codec with a 54-ball wafer-level CSP construction and a 0.4 mm pitch, according to its published product description. Its compact package places numerous connection points beneath or around the device body, so accurate land-pattern construction, assembly control, and pin assignment are essential. The manufacturer documentation should be consulted before creating a new footprint or routing a high-density audio board.
Typical uses include portable audio equipment, multimedia players, voice-capable accessories, compact consumer systems, and embedded products requiring a compact I2S audio output. A system designer can pair the codec with a suitable host processor, speaker or headphone amplifier, microphone circuitry, and power-management components. The host must support a compatible 24-bit I2S stream and the required 48 kHz audio clock.
The primary design consideration is package-level implementation. The 3.24 mm by 3.56 mm CSP requires a land pattern matching the manufacturer's ball layout, and exposed acoustic or thermal behavior should be evaluated in the final enclosure. Power, clock, and analog-output routing also need careful separation from switching circuitry to reduce interference in the audio path.
This product record combines the verified package and audio-interface characteristics with application guidance, comparison parameters, and practical design notes. It helps engineers identify whether the WM8915ECSN/R fits a compact I2S audio design before beginning footprint and schematic work.
直接替换替代料: WM8915ECSN/R ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料WM8915ECSN/R 最大额定值与电气特性
| Device Type | Single-function audio codec |
| Audio Converter Subtype | Audio DAC |
| Audio Resolution | 24 bit |
| Sample Rate | 48 kHz |
| Digital Audio Interface | I2S |
| DSP Feature | Yes |
| Number of Functions | 1 function |
| Process Technology | CMOS |
| Package Type | 54-W-CSP |
| Package Dimensions | 3.24 mm x 3.56 mm |
| Package Height | 0.583 mm |
| Ball Pitch | 0.4 mm |
| 安装类型 | Surface mount |
| Lead-Free Status | Lead free |
| Package Standard | MO-211C |
| Number of Package Balls | 54 balls |
WM8915ECSN/R 54 balls 引脚配置指南
WM8915ECSN/R(54 balls 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: WM8915ECSN/R.
请参阅 数据手册 以查看完整引脚配置。
典型应用
WM8915ECSN/R 适用于 6 应用s: Portable Media Player, Voice Accessory, Multimedia Tablet Accessory, Smart Home Audio Node, Compact Industrial Audio Module, Connected Audio Sensor.
Portable Media Player
The WM8915ECSN/R fits a compact portable media player requiring a 24-bit, 48 kHz digital audio path. Its I2S interface allows a host processor to transmit audio data to the codec, while the 54-W-CSP package measuring 3.24 mm by 3.56 mm supports space-conscious board construction. The implementation should reserve space for the codec's ball land pattern, decoupling, clock routing, and the subsequent speaker or headphone amplifier. Because the package uses a 0.4 mm pitch, assembly capability and board cleanliness must be reviewed before layout release.
推荐
Voice Accessory
A compact voice accessory can use the WM8915ECSN/R when the system requires a 24-bit I2S audio interface operating at 48 kHz. The DSP-labeled codec supports digital audio conversion in a package only 3.24 mm by 3.56 mm, which is useful where a dedicated speaker, microphone, or status-light module leaves limited board area. The host processor must generate the compatible I2S clock and data stream. Layout should keep the audio device away from switching converters and motor-control traces to minimize coupling into the analog output path.
推荐
Multimedia Tablet Accessory
The WM8915ECSN/R is applicable to an external multimedia audio accessory that receives digital sound from a USB-connected host and converts it through an I2S-based audio path. Its 24-bit format and 48 kHz sample rate align with common multimedia audio streams, while the small CSP footprint supports compact dock hardware. The complete accessory also requires a suitable host interface, clocking, output amplifier, and connector. Power and ground distribution should be arranged so the codec is not placed in the return-current path of loudspeaker or headphone amplifiers.
推荐
Smart Home Audio Node
A smart-home audio node can use the WM8915ECSN/R when local playback is required from a compact control module. The 54-W-CSP package leaves room for sensing, communications, and power circuitry on a densely populated board, while the 24-bit I2S interface provides a clear digital-audio connection to the host processor. Designers should place the device near its decoupling and analog output components, maintain short clock routes, and avoid routing high-current switching paths beneath the sensitive audio section. Enclosure acoustics and grounding should be evaluated together because both can affect perceived audio performance.
推荐
Compact Industrial Audio Module
The WM8915ECSN/R can support a compact industrial audio module that announces operating states, records monitoring audio, or provides local playback. The 24-bit, 48 kHz I2S capability offers a defined digital format for a controller or communications processor, and the 3.24 mm by 3.56 mm package helps preserve installation space. For industrial use, verify the manufacturer electrical limits and environmental qualifications before release. Printed-circuit assembly should account for the 0.4 mm package pitch, and analog routing should be separated from relays, power converters, and high-speed digital interfaces.
推荐
Connected Audio Sensor
The WM8915ECSN/R is relevant to a connected audio sensor that captures or reproduces sound within a compact industrial or smart-building enclosure. Its I2S interface can carry 24-bit audio at 48 kHz between the codec and a digital controller, while the small CSP package supports constrained sensor-node layouts. The design must provide compatible clocking, appropriate signal conditioning, and a defined analog connection to the microphone or output stage. Digital communications traces should be routed away from the codec and microphone components to reduce interference, while grounding should follow the complete analog return path.
推荐
推荐产品汇总
工程参考数据: WM8915ECSN/R ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | 54-W-CSP (3.24 mm x 3.56 mm) |
| Brand | Cirrus Logic |
| Device Type | Single-function audio codec |
| Audio Resolution | 24 bit |
| Sample Rate | 48 kHz |
| Digital Audio Interface | I2S |
| DSP Support | Yes |
| Process Technology | CMOS |
| Ball Pitch | 0.4 mm |
| Package Height | 0.583 mm |
| Lead-Free Status | Lead free |
| Package Standard | MO-211C |
关键差异点
- Compact 24-bit audio conversion (对比 WM8974)
- Defined digital audio format (对比 WM8960)
- Low-profile package construction (对比 Generic 54-W-CSP audio codec)
设计说明
Construct the footprint from the Cirrus Logic pin table and recommended land pattern rather than from the package dimensions alone. The 54-W-CSP uses a 0.4 mm ball pitch within a 3.24 mm by 3.56 mm body. Confirm pad length, pad width, solder-mask opening, and courtyard directly against the manufacturer drawing before releasing the PCB.
Place the codec close to the host processor's I2S controller and minimize the length of clock, data, and word-select routes. Keep the analog output and microphone paths away from switching-regulator nodes and high-current return paths. Use a continuous ground reference beneath the device and route analog returns without sharing narrow segments with digital or power return currents.
Do not substitute a codec merely because it uses a 54-W-CSP package. Ball assignments, exposed or undocumented functions, power rails, clock requirements, register maps, and analog signal paths must all be checked. The WM8915ECSN/R and WM8915ECSN designations also require confirmation from the ordering information before they are treated as interchangeable.
合规信息
The published package description identifies WM8915ECSN/R as lead free and references MO-211C. No explicit RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declaration was established.