WM8918CGEFL/RV - 24-Bit Stereo DAC | Cirrus Logic
料号: WM8918CGEFL/RV ✓ 量产中WM8918CGEFL/RV 概述
An audio DAC is a semiconductor that converts digital PCM audio samples into proportional analog voltages or currents. In the broader hierarchy, the WM8918 belongs to the audio converter class, combining an ADC/DAC-family data converter with integrated headphone-driver circuitry. This combination reduces the number of external signal-chain components and removes the need for output coupling capacitors when the ground-referenced headphone outputs are used as intended.
The WM8918 uses Wolfson Class-W amplifier techniques and an innovative dual-mode charge-pump architecture to optimize efficiency and power consumption during playback. Ground-referenced headphone and line outputs eliminate AC-coupling capacitors, while common-mode feedback paths help reject ground noise. The device accepts I2S-format digital audio and supports resolution and sample-rate combinations appropriate for consumer audio playback.
The device operates from 0.95 V to 1.98 V and is specified over a -40 °C to +85 °C operating-temperature range. Its 24-bit conversion resolution supports high-fidelity playback, while the 96 kHz capability accommodates professionally rendered and lossless audio material. The 32-QFN package supports compact surface-mount layouts but requires careful exposed-pad thermal management and controlled assembly soldering.
Typical applications include USB and Bluetooth headphone adapters, portable-listening products, mobile-device audio accessories, compact stereo playback systems, and embedded audio equipment. The integrated headphone stage is particularly useful when the design goal is a low-component-count analog output path while preserving a direct digital-audio connection from a host processor or audio codec.
Design the supply rails so the analog and digital domains remain within their specified operating range under transient loading. Place the manufacturer-recommended decoupling capacitors close to their associated supply pins, route digital audio signals away from the sensitive analog outputs, and provide adequate exposed-pad copper for thermal dissipation. Confirm the complete pin assignments and application circuit against the manufacturer datasheet before PCB release.
This product page consolidates the key electrical, packaging, lifecycle, application, and replacement information for engineers evaluating the WM8918CGEFL/RV. It also distinguishes verified drop-in replacements from merely similar audio converters, helping designers avoid board-level incompatibilities caused by different packages, interfaces, or pin assignments.
直接替换替代料: WM8918CGEFL/RV ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料WM8918CGEFL/RV 最大额定值与电气特性
| Device Type | Stereo audio digital-to-analog converter with integrated headphone amplifiers |
| Converter Resolution | 24 bit |
| Maximum Audio Sample Rate | 96 kHz |
| Digital Audio Interface | I2S |
| Analog Supply Voltage Range | 0.95 V to 1.98 V |
| Digital Supply Voltage Range | 0.95 V to 1.98 V |
| Output Architecture | Ground-referenced stereo headphone and line outputs |
| Headphone Amplifier Technique | Wolfson Class-W with dual-mode charge pump |
| Output Coupling Capacitors | Not required for ground-referenced outputs |
| Common-Mode Feedback | Included on headphone and line outputs |
| 工作温度范围 | -40 °C to +85 °C |
| 封装 | 32-QFN (4 mm x 4 mm) |
| 安装类型 | Surface mount |
| Packaging | Reel, TR |
| 生命周期状态 | Active |
| RoHS 状态 | Unknown |
| REACH Status | Unknown |
| AEC-Q100 Qualification | Not applicable |
| Lead-Free Status | Unknown |
| Halogen-Free Status | Unknown |
WM8918CGEFL/RV 32-qfn (4 mm x 4 mm) 引脚配置指南
WM8918CGEFL/RV(32-qfn (4 mm x 4 mm) 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: WM8918CGEFL/RV.
请参阅 数据手册 以查看完整引脚配置。
典型应用
WM8918CGEFL/RV 适用于 6 应用s: USB Headphone Adapter, Bluetooth Audio Accessory, Portable Media Player, Digital Audio Player, Consumer Audio Hub, Embedded Audio Interface.
USB Headphone Adapter
The WM8918CGEFL/RV fits a USB headphone adapter because it combines a 24-bit I2S DAC with integrated stereo headphone amplification in a compact 32-QFN package. A USB audio controller can stream digital samples directly to the WM8918, while the Class-W output stage and dual-mode charge pump support efficient low-voltage playback. Operating from 0.95 V to 1.98 V supports compact supply designs, and the ground-referenced outputs can remove conventional headphone coupling capacitors. The design must still provide stable supplies, correct I2S timing, adequate output-current margin, and the manufacturer-recommended layout around the exposed pad and analog outputs.
Bluetooth Audio Accessory
The WM8918CGEFL/RV is well suited to a Bluetooth headset or speaker accessory requiring a low-power, high-resolution playback path. Its I2S interface can accept decoded stereo audio from a Bluetooth audio processor, while the 24-bit conversion capability supports detailed digital sources and the 96 kHz rating covers higher-rate content. Integrated ground-referenced headphone or line outputs reduce the external analog component count. Designers should verify the decoder's clocking and data format, budget energy for the charge-pump and output stage, and validate channel imbalance and distortion at the intended headphone impedance.
Portable Media Player
A portable media player can use the WM8918CGEFL/RV to turn I2S audio data into a low-power analog headphone signal. The 24-bit DAC resolution and 96 kHz capability are appropriate for lossless or professionally rendered content, while the ultra-low-power architecture targets efficient playback. The 4 mm by 4 mm 32-QFN package supports dense portable layouts, although assembly and exposed-pad heat spreading require careful planning. A practical implementation needs rail sequencing compatible with 0.95 V to 1.98 V operation, verified startup behavior, and a headphone model that remains stable across the full output-frequency range.
Digital Audio Player
The WM8918CGEFL/RV can serve as the playback converter in a digital audio player that accepts 24-bit I2S content. Its 96 kHz maximum sample rate provides flexibility for music, video, and communication audio paths, while integrated headphone drivers reduce the need for a separate analog output stage. Ground-referenced outputs simplify the headphone connection by eliminating AC-coupling capacitors and may reduce low-frequency response limitations associated with those capacitors. For production use, confirm the required output power, load impedance, channel-balance requirements, digital clock source, and acoustic performance with the intended headset.
Consumer Audio Hub
The WM8918CGEFL/RV is appropriate for a compact consumer audio hub that converts an I2S source into stereo headphone or line-level outputs. The 24-bit DAC resolution supports high-quality playback, and the 0.95 V to 1.98 V operating range allows integration with compatible low-voltage digital and analog rails. Its small 32-QFN footprint helps reduce board area, while the integrated charge-pump architecture avoids an external headphone output stage. Layout should isolate I2S clock and data paths from the analog output region, and system validation should include startup, shutdown, channel mute, and sustained-playback thermal testing.
Embedded Audio Interface
The WM8918CGEFL/RV can provide a compact playback interface for an embedded controller or digital-audio module. A host processor can send 24-bit I2S data at rates up to 96 kHz, and the integrated headphone amplifiers provide an analog endpoint without a separate driver IC. The ultra-low-power design is valuable in embedded equipment where standby and playback energy are important, while the compact QFN package preserves board area. Engineers should assess whether the host can generate the required clocking and control sequence, and they should use the manufacturer application circuit to select decoupling, output routing, and exposed-pad thermal connections.
工程参考数据: WM8918CGEFL/RV ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Cirrus Logic |
| Package | 32-QFN (4 mm x 4 mm) |
| Device Type | Stereo DAC with integrated headphone amplifiers |
| Converter Resolution | 24 bit |
| Maximum Sample Rate | 96 kHz |
| Digital Audio Interface | I2S |
| Operating Supply Range | 0.95 V to 1.98 V |
| Operating Temperature | -40 °C to +85 °C |
| Output Configuration | Ground-referenced stereo headphone and line outputs |
| Amplifier Architecture | Class-W with dual-mode charge pump |
关键差异点
- Integrated low-power headphone output stage (对比 WM8924)
- Direct digital-audio playback capability (对比 WM893)
- Component-count reduction at the analog output (对比 Discrete codec plus headphone amplifier)
设计说明
Follow the manufacturer application circuit for the placement of analog and digital decoupling capacitors. Keep each capacitor close to its intended supply pin, use the required capacitance and voltage rating, and minimize the return-current path through the ground plane. Treat the exposed pad as both a thermal connection and an electrical connection specified by the datasheet. A compact 32-QFN land pattern is sensitive to assembly variation, so verify the solder mask and paste geometry against the recommended footprint.
Route I2S data, clock, and control signals away from the headphone and line outputs and their ground references. Maintain short, symmetric analog paths from the DAC pins to the output network, and place any filtering components close to the relevant pins or connector according to the application circuit. Pay particular attention to the ground-referenced output architecture: although output coupling capacitors are not required, return-path discontinuities can still degrade channel balance or introduce audible noise.
Ensure that analog and digital supply rails remain within 0.95 V to 1.98 V under startup, mute, playback, and shutdown conditions. The internal dual-mode charge pump is optimized for efficient playback, but external rail impedance can still affect noise and transient behavior. Use local bulk and high-frequency decoupling as specified in the manufacturer datasheet, and avoid sharing narrow supply paths with digital processors, switching converters, or radio-frequency circuitry.
Provide continuous exposed-pad copper and thermal vias according to the recommended land pattern, especially in compact enclosures and sustained-playback products. Validate the hottest expected operating condition rather than relying only on ambient temperature. Because the exposed-pad connection and package pin count must match the selected footprint, confirm the manufacturer pin table and land pattern together before releasing artwork or placing the order.
合规信息
The product is an active consumer-audio IC, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were found in the cited manufacturer material.