AMD

XA3S200-4PQG208I - Automotive Spartan-3 FPGA | AMD

料号: XA3S200-4PQG208I ✓ 量产中
1.2 V Vdss 17 standards Rds(on) 208-pin PQFP Package
最小起订量: 1 |

XA3S200-4PQG208I 概述

AMD XA3S200-4PQG208I is an automotive-grade Spartan-3 XA field-programmable gate array with 200,000 system gates, 4,320 logic cells, 141 I/O, and a 208-pin PQFP package. The I-grade device supports an industrial junction-temperature range of -40°C to +100°C and is qualified to AEC-Q100. It combines programmable logic, block RAM, dedicated digital signal processing resources, and selectable I/O performance in a single FPGA package.

An FPGA is a user-programmable semiconductor in the broader hierarchy of programmable logic devices, semiconductors, and digital integrated circuits. Unlike a fixed-function logic IC, an FPGA allows designers to implement parallel processing, control logic, interfaces, and signal-processing functions through a configurable digital architecture. The Spartan-3 family targets cost-sensitive designs requiring moderate logic density, flexible I/O, and integrated memory rather than the very high resource counts of a high-end FPGA.

Key features include 4,320 logic cells, 141 available I/O, and support for seventeen single-ended I/O standards. The device also supports seven differential signal standards, including LVDS, and provides digitally controlled impedance termination. These resources allow one programmable device to consolidate multiple board functions while supporting common high-speed interfaces. The listed 622 Mb/s data-transfer rate per I/O indicates the performance class available when suitable standards and board implementations are used.

The XA3S200-4PQG208I uses a 90 nm Spartan-3 FPGA architecture and is positioned for automotive electronic systems requiring higher reliability than conventional commercial devices. Its AEC-Q100 qualification and extended-temperature availability are important when the FPGA controls a safety-relevant or mission-critical function. Configuration data determines the implemented logic, so board-level programming, device handling, and verification practices remain essential parts of the design process.

Typical applications include automotive body and chassis electronics, vehicle communication modules, engine or transmission control systems, industrial automation equipment, and compact embedded control platforms. The combination of 4,320 logic cells, 141 I/O, integrated block RAM, and mixed I/O standards is especially useful for controllers that collect sensor inputs, execute control algorithms, and communicate with external networks.

PCB design should preserve the package footprint, power and ground distribution, decoupling requirements, configuration interface, and supported I/O standards of the Spartan-3 XA family. Differential pairs require controlled impedance and careful return-path planning. Designers should also account for the stated operating-temperature grade and verify the selected configuration method, system clocking, memory interfaces, and unused-pin treatment in the manufacturer documentation.

This product page consolidates the exact package, logic-resource, I/O, temperature-grade, compliance, and interface information for XA3S200-4PQG208I. It also provides application guidance, package-oriented comparison details, and practical design notes to help engineers evaluate FPGA integration before requesting a quote.

直接替换替代料: XA3S200-4PQG208I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: XA3S200-4PQG208I (相同外形与封装尺寸) ——差异在于 Device Type, Package, Temperature Grade.

Xilinx
Device Type: Spartan-3 XA Field-Programmable Gate Array
Package: 208-pin PQFP / 208-BFQFP
Temperature Grade: Automotive
对比 XA3S200-4PQG208I →

XA3S200-4PQG208Q

✅ 直接替换
Xilinx
📦 208-pin PQFP
Spartan-3 XA Field-Programmable Gate Array · 200,000 gates · 4,320 cells · 480 CLBs · 221,184 bits · 141 pins · 208 terminals · 1.14 V to 1.26 V

联系询价

查看数据手册 →

XA3S200-4PQG208E

✅ 直接替换 ⚠️ 规格未核验
📦 208-pin PQFP
Temperature-grade suffix differs from the I-grade target; pinout and core FPGA resources remain package-compatible

📋 参考替代料(不在目录中)

XA3S200-4PQG208C

✅ 直接替换 ⚠️ 规格未核验
📦 208-pin PQFP
Temperature-grade suffix differs from the I-grade target; pinout and core FPGA resources remain package-compatible

📋 参考替代料(不在目录中)

XA3S200-4PQG208I 最大额定值与电气特性

Device Type Spartan-3 XA field-programmable gate array (FPGA)
System Gates 200,000 gates
Logic Cells 4,320 cells
Number of I/O 141 I/O
封装 208-pin PQFP
Package Code PQG208
Nominal Supply Voltage 1.2 V
Maximum I/O Data Rate 622 Mb/s per I/O
Single-Ended I/O Standards 17 standards
Differential I/O Standards 7 standards
Differential Standard LVDS
Termination Control Digitally controlled impedance
Process Technology 90 nm
Temperature Grade I-grade, -40°C to +100°C junction temperature
Automotive Qualification AEC-Q100 qualified
RoHS 状态 RoHS Compliant
Lead-Free Status Lead Free
安装方式 Surface mount
Package Shape Square
Terminal Form Gull wing
Programming Configurable FPGA logic; programming interface details require manufacturer documentation

XA3S200-4PQG208I square 引脚配置指南

XA3S200-4PQG208I(square 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

XA3S200-4PQG208I 的 square 封装引脚图

暂无详细引脚数据: XA3S200-4PQG208I.

请参阅 数据手册 以查看完整引脚配置。

典型应用

XA3S200-4PQG208I 适用于 6 应用s: Automotive Body Control Module, Vehicle Communication Gateway, Industrial Automation Controller, Engine or Transmission Control, Sensor Acquisition and Signal Conditioning, Embedded Communications and Cryptographic Control.

🚗

Automotive Body Control Module

The XA3S200-4PQG208I suits an automotive body controller that consolidates switch inputs, actuator sequencing, diagnostic logic, and communication interfaces. Its 4,320 logic cells and 141 I/O provide parallel resources for state machines, debouncing, pulse-width control, and protocol handling without requiring multiple small controllers. The I-grade device operates from -40°C to +100°C junction temperature, while the XA Spartan-3 family is qualified to AEC-Q100. Use the manufacturer pin and power documentation to implement the configuration interface, decoupling network, and protected vehicle I/O connections.

🌐

Vehicle Communication Gateway

The XA3S200-4PQG208I can implement protocol conversion, message filtering, and routing between vehicle communication domains. Its 141 available I/O allow multiple digital interfaces to coexist, while the seven supported differential standards, including LVDS, support suitable high-speed links when the correct I/O bank and board constraints are observed. The 622 Mb/s per-I/O figure represents the supported high-speed performance class, not a guarantee for every protocol. Automotive qualification, I-grade temperature behavior, and the 208-pin PQFP footprint support integration into a controller designed for harsh operating conditions.

🏭

Industrial Automation Controller

The XA3S200-4PQG208I is appropriate for industrial automation modules that coordinate sensors, actuators, counters, interlocks, and field-bus traffic. Four thousand three hundred twenty logic cells provide enough parallel capacity for deterministic control pipelines and communication formatting, and the 141 I/O reduce the need for external glue logic. Its -40°C to +100°C I-grade junction range supports equipment operating beyond typical commercial temperatures. The same device can consolidate several fixed-function controllers when the design team validates timing, I/O standards, configuration retention, and factory-test requirements.

🚗

Engine or Transmission Control

The XA3S200-4PQG208I can support compact engine-management or transmission-control functions where parallel sensor processing, actuator timing, and diagnostic routines must operate predictably. The 4,320-cell architecture accommodates parallel control logic and modest lookup or filtering functions, while 141 I/O simplify connection to crank, cam, pressure, temperature, valve, and actuator channels. AEC-Q100-qualified XA Spartan-3 family positioning supports automotive design processes, and the I-grade part provides operation from -40°C to +100°C junction temperature. Functional safety, diagnostics, and environmental validation remain system-level responsibilities.

🧩

Sensor Acquisition and Signal Conditioning

The XA3S200-4PQG208I can collect parallel digital sensor inputs, perform digital filtering, and distribute timing or control signals in a compact embedded acquisition module. Its 141 I/O accommodate multiple sensors, while selectable I/O standards and digitally controlled impedance help simplify board-level interface design. The 90 nm Spartan-3 XA implementation combines logic and block RAM for local buffering without external memory on every channel. Engineers should partition the I/O banks according to voltage and standard constraints, use manufacturer guidance for clocking and termination, and verify acquisition timing against the actual sensor and cable environment.

📱

Embedded Communications and Cryptographic Control

The XA3S200-4PQG208I can implement communication framing, protocol engines, packet filters, and cryptographic control logic around a larger system processor. Parallelizable operations benefit from a dedicated FPGA architecture, and 4,320 logic cells with integrated block RAM can support buffering and pre-processing before data reaches a host processor. Seventeen single-ended and seven differential I/O standards provide options for board-level connectivity, including LVDS where required. The design should reserve configuration and clock resources carefully, validate timing against the selected interface, and avoid assuming that firmware can correct an unsafe external bus configuration.

What is AMD XA3S200-4PQG208I?
AMD XA3S200-4PQG208I is an automotive Spartan-3 XA FPGA with 200,000 system gates, 4,320 logic cells, and 141 I/O in a 208-pin PQFP package. According to the Xilinx Spartan-3 XA family documentation, the XA family combines programmable logic with block RAM, digital signal processing resources, and flexible I/O for cost-sensitive automotive electronic systems. The I suffix identifies an industrial-temperature-grade device.
What are the key specifications of XA3S200-4PQG208I?
The XA3S200-4PQG208I provides 200,000 system gates, 4,320 logic cells, 141 I/O, and a 1.2 V nominal supply. Manufacturer family documentation identifies seventeen single-ended I/O standards, seven differential standards including LVDS, and digitally controlled impedance termination. The device is offered in a 208-pin PQFP package and uses 90 nm Spartan-3 FPGA technology.
What is the operating temperature range of XA3S200-4PQG208I?
The XA3S200-4PQG208I is an I-grade device rated for -40°C to +100°C junction temperature. The Xilinx automotive FPGA documentation distinguishes I-grade parts from extended-temperature Q-grade parts, which operate to +125°C junction temperature. For an automotive enclosure, use the junction-temperature limit together with the local thermal resistance rather than treating the range as an ambient specification.
Where can I download the XA3S200-4PQG208I datasheet PDF?
The XA3S200-4PQG208I datasheet PDF is available from the product-documentation link on this page. It describes the Spartan-3 XA family, including 4,320 logic cells, 141 I/O, the 90 nm process, supported I/O standards, and the distinction between I-grade and Q-grade temperature options. Use the manufacturer family documentation to confirm configuration, pinout, and operating limits before releasing a PCB design.
Where can I find the XA3S200-4PQG208I pinout?
The XA3S200-4PQG208I uses a 208-pin PQFP package, and its complete numbered pinout must be taken from the pin-description table in the manufacturer Spartan-3 XA datasheet. The published product listings identify the 208-terminal gull-wing package but do not reproduce all 208 pin names. Do not derive unused-pin connections or power assignments from a third-party summary; cross-check every connection against the ordering-information table for the exact device.
Is XA3S200-4PQG208I suitable for automotive applications?
Yes, XA3S200-4PQG208I is specifically positioned for automotive electronic applications and the XA Spartan-3 family is qualified to AEC-Q100. The I-grade configuration supports -40°C to +100°C junction temperature. Automotive suitability still depends on the complete system design, including environmental stress, power integrity, diagnostic strategy, functional safety requirements, and the AEC-Q100 classification of the finished equipment.
How does XA3S200-4PQG208I compare with XA3S200-4PQG208Q?
The XA3S200-4PQG208I and XA3S200-4PQG208Q share the 208-pin PQFP device family and Spartan-3 XA FPGA implementation, while their temperature grades differ. The I-grade part supports -40°C to +100°C junction temperature; the Q-grade version supports -40°C to +125°C. The Q-grade device is therefore the appropriate choice when the calculated junction temperature can exceed the I-grade limit.
What is the best drop-in replacement for XA3S200-4PQG208I?
A drop-in replacement must retain the 208-pin PQFP footprint, pin functions, supported I/O standards, configuration behavior, and required temperature rating. The closely related XA3S200-4PQG208Q is a same-footprint option when its -40°C to +125°C junction-temperature capability meets the design requirements. No verified cross-manufacturer substitute was identified, so PCB or configuration changes should not be assumed for any replacement.
Can XA3S200-4PQG208Q replace XA3S200-4PQG208I?
Yes, XA3S200-4PQG208Q can serve as a same-package upgrade when the application can tolerate its higher temperature rating. Both parts belong to the Spartan-3 XA family and use the 208-pin PQFP package, while both retain 4,320 logic cells and 141 I/O. The meaningful difference is temperature grade: Q extends to +125°C junction temperature, compared with +100°C for the I-grade part.
What can replace XA3S200-4PQG208I in an automotive controller?
The strongest replacement candidate is another orderable XA3S200 device in the 208-pin PQFP package with the same logic, I/O, configuration, and electrical functions. XA3S200-4PQG208Q provides the clearest same-family path for designs that need the extended-temperature grade. A cross-brand replacement cannot be recommended without verified pin-to-pin, configuration, and timing equivalence, because a similar FPGA specification alone does not establish drop-in compatibility.
When should I choose XA3S200-4PQG208I over XA3S200-4PQG208Q?
Choose XA3S200-4PQG208I when the calculated junction temperature remains within -40°C to +100°C and the I-grade device is appropriate for the qualification plan. Choose XA3S200-4PQG208Q when additional junction-temperature margin is needed for hot automotive locations or conservative thermal analysis. Both provide the same 208-pin PQFP format and 4,320-cell Spartan-3 XA logic foundation.
Is XA3S200-4PQG208I suitable for industrial automation and embedded control?
Yes, XA3S200-4PQG208I is suitable for industrial and embedded-control designs that need 141 I/O and moderate programmable logic density. Its 4,320 logic cells can support parallel control logic, state machines, communication interfaces, and modest data-processing pipelines, while block RAM supports buffering and local storage. The I-grade temperature range and AEC-Q100-qualified family positioning also support demanding control applications.
Where can I buy XA3S200-4PQG208I online?
Use the Request a Quote form on this page to request the current availability, lead time, and order terms for XA3S200-4PQG208I. The part is an AMD Xilinx Spartan-3 XA FPGA in a 208-pin PQFP package with an I-grade temperature designation. A quotation request ensures that the exact MPN, package marking, delivery quantity, and production requirements are reviewed together.
What is the price of XA3S200-4PQG208I?
Submit the XA3S200-4PQG208I part number through the Request a Quote form on this page for the current order value. Pricing for this FPGA can depend on quantity, procurement status, traceability requirements, and delivery timing. This page intentionally renders commercial terms through the quotation process rather than publishing a static price that could become outdated.
What is the lead time for XA3S200-4PQG208I?
Request the current lead time for XA3S200-4PQG208I through the Request a Quote form on this page. The exact timing should be confirmed against your required quantity, date code, packaging format, and traceability documentation. For production planning, provide the committed demand and target delivery date so the supply response reflects the actual procurement requirement.
Is XA3S200-4PQG208I in stock?
Current XA3S200-4PQG208I stock status should be confirmed through the Request a Quote form on this page. Enter the required quantity and any date-code or traceability constraints with the request. This approach avoids treating a general listing indication as a guaranteed allocation for the exact automotive-grade 208-pin PQFP configuration.

工程参考数据: XA3S200-4PQG208I ——对比、设计指导和合规信息。

选型指南

Choose XA3S200-4PQG208I for a 208-pin PQFP automotive or industrial design whose calculated junction temperature remains between -40°C and +100°C. Its 4,320 logic cells, 141 I/O, AEC-Q100-qualified family positioning, and range of supported I/O standards suit compact control, communication, and signal-processing systems. Select XA3S200-4PQG208Q when the same package and FPGA resources are needed but the thermal design requires operation up to +125°C junction temperature. The E-grade and C-grade same-package variants can be considered only after their exact temperature and qualification details are confirmed against the ordering documentation. A 144-pin related device such as XA3S200-4TQG144I is not a drop-in choice because it offers only 97 I/O and requires a different footprint. No cross-brand substitute should be selected without verified pin, configuration, electrical, and timing equivalence.

与替代料对比

参数 本产品 XA3S200-4PQG208Q XA3S200-4PQG208E XA3S200-4PQG208C
Package 208-pin PQFP 208-pin PQFP 208-pin PQFP 208-pin PQFP
Brand AMD AMD AMD AMD
FPGA Family Spartan-3 XA Spartan-3 XA Spartan-3 XA Spartan-3 XA
System Gates 200,000 gates 200,000 gates 200,000 gates 200,000 gates
Logic Cells 4,320 cells 4,320 cells 4,320 cells 4,320 cells
Number of I/O 141 I/O 141 I/O 141 I/O 141 I/O
Process Technology 90 nm 90 nm 90 nm 90 nm
Maximum I/O Data Rate 622 Mb/s per I/O 622 Mb/s per I/O 622 Mb/s per I/O 622 Mb/s per I/O
Differential I/O Standards 7 standards including LVDS 7 standards including LVDS 7 standards including LVDS 7 standards including LVDS

关键差异点

  • Automotive-focused Spartan-3 XA qualification (对比 XC3S200A-4VQG100I)
  • Higher I/O count in the same PQFP-208 family (对比 XA3S200-4TQG144I)
  • Extended-temperature same-package upgrade (对比 XA3S200-4PQG208Q)

设计说明

Calculate the FPGA junction temperature from ambient temperature, package dissipation, and the board-specific thermal path. The XA3S200-4PQG208I is rated to +100°C junction temperature in I-grade, so margin must remain below that limit across vehicle or industrial temperature extremes. If the thermal estimate approaches the limit, improve copper spreading, airflow, or thermal coupling before considering the Q-grade alternative. Do not substitute an ambient rating for the specified junction-temperature rating.

Follow the Spartan-3 XA recommended-land-pattern, power-plane, decoupling, and configuration-circuit guidance for the 208-pin PQFP footprint. Place bypass capacitors close to their associated supply pins and provide a low-impedance return path for every high-speed I/O. Confirm pin assignments and NC treatment in the exact device pin table before routing. Because the package library used by this page does not contain a dedicated 208-pin PQFP drawing, use the manufacturer package drawing for land-pattern dimensions.

Assign LVDS or other differential signals only to pins and banks that support the selected I/O standard, then use controlled-impedance PCB geometry and continuous reference planes. The device supports seven differential standards and seventeen single-ended standards, but the selected standard still constrains voltage, clocking, termination, and timing. Validate source-synchronous interfaces at the intended data rate; the listed 622 Mb/s capability is a device-level I/O figure and does not guarantee end-to-end system performance.

Do not treat a same-gate-count FPGA from another family as a drop-in replacement. A valid alternative must preserve the package footprint, pin functions, I/O voltage rules, configuration interface, memory interfaces, timing expectations, and programming support. Similarly, do not confuse the 208-pin PQFP target with related devices in 144-pin TQFP packages, which have fewer I/O and require PCB redesign. Confirm the bitstream target and device identification before production programming.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Qualified
无铅
Yes
无卤
Unknown
冲突矿物
Unknown

The XA Spartan-3 family is identified as qualified to AEC-Q100. Product information lists the device as RoHS Compliant and Lead Free. No separate REACH, halogen-free, or conflict-minerals declaration was identified.

相关搜索

XA3S200-4PQG208I datasheet XA3S200-4PQG208I pinout XA3S200-4PQG208I specifications AMD XA3S200-4PQG208I XA3S200-4PQG208I 208 pin PQFP XA3S200-4PQG208I automotive FPGA XA3S200-4PQG208I equivalent XA3S200-4PQG208I replacement XA3S200-4PQG208I vs XA3S200-4PQG208Q XA3S200-4PQG208I price XA3S200-4PQG208I stock XA3S200-4PQG208I AEC-Q100 XA3S200-4PQG208I 141 I/O XA3S200-4PQG208I 4320 logic cells

相关元器件 & 术语

AMD Xilinx XA3S200-4PQG208I XA3S200-4PQG208Q XA3S200-4PQG208E XA3S200-4PQG208C Spartan-3 XA field-programmable gate array FPGA programmable logic device digital integrated circuit semiconductor logic cell system gate block RAM digital signal processing I/O bank LVDS digitally controlled impedance single-ended I/O differential I/O 208-pin PQFP surface-mount package AEC-Q100 RoHS
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情