XA3S200-4PQG208I - Automotive Spartan-3 FPGA | AMD
MPN: XA3S200-4PQG208I ✓ פעילXA3S200-4PQG208I סקירה
An FPGA is a user-programmable semiconductor in the broader hierarchy of programmable logic devices, semiconductors, and digital integrated circuits. Unlike a fixed-function logic IC, an FPGA allows designers to implement parallel processing, control logic, interfaces, and signal-processing functions through a configurable digital architecture. The Spartan-3 family targets cost-sensitive designs requiring moderate logic density, flexible I/O, and integrated memory rather than the very high resource counts of a high-end FPGA.
Key features include 4,320 logic cells, 141 available I/O, and support for seventeen single-ended I/O standards. The device also supports seven differential signal standards, including LVDS, and provides digitally controlled impedance termination. These resources allow one programmable device to consolidate multiple board functions while supporting common high-speed interfaces. The listed 622 Mb/s data-transfer rate per I/O indicates the performance class available when suitable standards and board implementations are used.
The XA3S200-4PQG208I uses a 90 nm Spartan-3 FPGA architecture and is positioned for automotive electronic systems requiring higher reliability than conventional commercial devices. Its AEC-Q100 qualification and extended-temperature availability are important when the FPGA controls a safety-relevant or mission-critical function. Configuration data determines the implemented logic, so board-level programming, device handling, and verification practices remain essential parts of the design process.
Typical applications include automotive body and chassis electronics, vehicle communication modules, engine or transmission control systems, industrial automation equipment, and compact embedded control platforms. The combination of 4,320 logic cells, 141 I/O, integrated block RAM, and mixed I/O standards is especially useful for controllers that collect sensor inputs, execute control algorithms, and communicate with external networks.
PCB design should preserve the package footprint, power and ground distribution, decoupling requirements, configuration interface, and supported I/O standards of the Spartan-3 XA family. Differential pairs require controlled impedance and careful return-path planning. Designers should also account for the stated operating-temperature grade and verify the selected configuration method, system clocking, memory interfaces, and unused-pin treatment in the manufacturer documentation.
This product page consolidates the exact package, logic-resource, I/O, temperature-grade, compliance, and interface information for XA3S200-4PQG208I. It also provides application guidance, package-oriented comparison details, and practical design notes to help engineers evaluate FPGA integration before requesting a quote.
חלופות תחליף ישיר עבור XA3S200-4PQG208I — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם XA3S200-4PQG208I (אותו גורם צורה וטביעת רגל) — שונים ב Device Type, Package, Temperature Grade.
XA3S200-4PQG208Q
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←XA3S200-4PQG208E
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
XA3S200-4PQG208C
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
XA3S200-4PQG208I דירוגים מרביים ומאפיינים חשמליים
| Device Type | Spartan-3 XA field-programmable gate array (FPGA) |
| System Gates | 200,000 gates |
| Logic Cells | 4,320 cells |
| Number of I/O | 141 I/O |
| מארז | 208-pin PQFP |
| Package Code | PQG208 |
| Nominal Supply Voltage | 1.2 V |
| Maximum I/O Data Rate | 622 Mb/s per I/O |
| Single-Ended I/O Standards | 17 standards |
| Differential I/O Standards | 7 standards |
| Differential Standard | LVDS |
| Termination Control | Digitally controlled impedance |
| Process Technology | 90 nm |
| Temperature Grade | I-grade, -40°C to +100°C junction temperature |
| Automotive Qualification | AEC-Q100 qualified |
| סטטוס RoHS | RoHS Compliant |
| Lead-Free Status | Lead Free |
| סגנון הרכבה | Surface mount |
| Package Shape | Square |
| Terminal Form | Gull wing |
| Programming | Configurable FPGA logic; programming interface details require manufacturer documentation |
מדריך תצורת פינים של XA3S200-4PQG208I square
תצורת פינים עבור XA3S200-4PQG208I (מארזת square). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור XA3S200-4PQG208I.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
XA3S200-4PQG208I מתאים עבור 6 יישוםs: Automotive Body Control Module, Vehicle Communication Gateway, Industrial Automation Controller, Engine or Transmission Control, Sensor Acquisition and Signal Conditioning, Embedded Communications and Cryptographic Control.
Automotive Body Control Module
The XA3S200-4PQG208I suits an automotive body controller that consolidates switch inputs, actuator sequencing, diagnostic logic, and communication interfaces. Its 4,320 logic cells and 141 I/O provide parallel resources for state machines, debouncing, pulse-width control, and protocol handling without requiring multiple small controllers. The I-grade device operates from -40°C to +100°C junction temperature, while the XA Spartan-3 family is qualified to AEC-Q100. Use the manufacturer pin and power documentation to implement the configuration interface, decoupling network, and protected vehicle I/O connections.
מומלץ
Vehicle Communication Gateway
The XA3S200-4PQG208I can implement protocol conversion, message filtering, and routing between vehicle communication domains. Its 141 available I/O allow multiple digital interfaces to coexist, while the seven supported differential standards, including LVDS, support suitable high-speed links when the correct I/O bank and board constraints are observed. The 622 Mb/s per-I/O figure represents the supported high-speed performance class, not a guarantee for every protocol. Automotive qualification, I-grade temperature behavior, and the 208-pin PQFP footprint support integration into a controller designed for harsh operating conditions.
מומלץ
Industrial Automation Controller
The XA3S200-4PQG208I is appropriate for industrial automation modules that coordinate sensors, actuators, counters, interlocks, and field-bus traffic. Four thousand three hundred twenty logic cells provide enough parallel capacity for deterministic control pipelines and communication formatting, and the 141 I/O reduce the need for external glue logic. Its -40°C to +100°C I-grade junction range supports equipment operating beyond typical commercial temperatures. The same device can consolidate several fixed-function controllers when the design team validates timing, I/O standards, configuration retention, and factory-test requirements.
מומלץ
Engine or Transmission Control
The XA3S200-4PQG208I can support compact engine-management or transmission-control functions where parallel sensor processing, actuator timing, and diagnostic routines must operate predictably. The 4,320-cell architecture accommodates parallel control logic and modest lookup or filtering functions, while 141 I/O simplify connection to crank, cam, pressure, temperature, valve, and actuator channels. AEC-Q100-qualified XA Spartan-3 family positioning supports automotive design processes, and the I-grade part provides operation from -40°C to +100°C junction temperature. Functional safety, diagnostics, and environmental validation remain system-level responsibilities.
מומלץ
Sensor Acquisition and Signal Conditioning
The XA3S200-4PQG208I can collect parallel digital sensor inputs, perform digital filtering, and distribute timing or control signals in a compact embedded acquisition module. Its 141 I/O accommodate multiple sensors, while selectable I/O standards and digitally controlled impedance help simplify board-level interface design. The 90 nm Spartan-3 XA implementation combines logic and block RAM for local buffering without external memory on every channel. Engineers should partition the I/O banks according to voltage and standard constraints, use manufacturer guidance for clocking and termination, and verify acquisition timing against the actual sensor and cable environment.
מומלץ
Embedded Communications and Cryptographic Control
The XA3S200-4PQG208I can implement communication framing, protocol engines, packet filters, and cryptographic control logic around a larger system processor. Parallelizable operations benefit from a dedicated FPGA architecture, and 4,320 logic cells with integrated block RAM can support buffering and pre-processing before data reaches a host processor. Seventeen single-ended and seven differential I/O standards provide options for board-level connectivity, including LVDS where required. The design should reserve configuration and clock resources carefully, validate timing against the selected interface, and avoid assuming that firmware can correct an unsafe external bus configuration.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור XA3S200-4PQG208I — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | XA3S200-4PQG208Q | XA3S200-4PQG208E | XA3S200-4PQG208C |
|---|---|---|---|---|
| Package | 208-pin PQFP | 208-pin PQFP | 208-pin PQFP | 208-pin PQFP |
| Brand | AMD | AMD | AMD | AMD |
| FPGA Family | Spartan-3 XA | Spartan-3 XA | Spartan-3 XA | Spartan-3 XA |
| System Gates | 200,000 gates | 200,000 gates | 200,000 gates | 200,000 gates |
| Logic Cells | 4,320 cells | 4,320 cells | 4,320 cells | 4,320 cells |
| Number of I/O | 141 I/O | 141 I/O | 141 I/O | 141 I/O |
| Process Technology | 90 nm | 90 nm | 90 nm | 90 nm |
| Maximum I/O Data Rate | 622 Mb/s per I/O | 622 Mb/s per I/O | 622 Mb/s per I/O | 622 Mb/s per I/O |
| Differential I/O Standards | 7 standards including LVDS | 7 standards including LVDS | 7 standards including LVDS | 7 standards including LVDS |
מבדילים עיקריים
- Automotive-focused Spartan-3 XA qualification (לעומתXC3S200A-4VQG100I)
- Higher I/O count in the same PQFP-208 family (לעומתXA3S200-4TQG144I)
- Extended-temperature same-package upgrade (לעומתXA3S200-4PQG208Q)
הערות תכנון
Calculate the FPGA junction temperature from ambient temperature, package dissipation, and the board-specific thermal path. The XA3S200-4PQG208I is rated to +100°C junction temperature in I-grade, so margin must remain below that limit across vehicle or industrial temperature extremes. If the thermal estimate approaches the limit, improve copper spreading, airflow, or thermal coupling before considering the Q-grade alternative. Do not substitute an ambient rating for the specified junction-temperature rating.
Follow the Spartan-3 XA recommended-land-pattern, power-plane, decoupling, and configuration-circuit guidance for the 208-pin PQFP footprint. Place bypass capacitors close to their associated supply pins and provide a low-impedance return path for every high-speed I/O. Confirm pin assignments and NC treatment in the exact device pin table before routing. Because the package library used by this page does not contain a dedicated 208-pin PQFP drawing, use the manufacturer package drawing for land-pattern dimensions.
Assign LVDS or other differential signals only to pins and banks that support the selected I/O standard, then use controlled-impedance PCB geometry and continuous reference planes. The device supports seven differential standards and seventeen single-ended standards, but the selected standard still constrains voltage, clocking, termination, and timing. Validate source-synchronous interfaces at the intended data rate; the listed 622 Mb/s capability is a device-level I/O figure and does not guarantee end-to-end system performance.
Do not treat a same-gate-count FPGA from another family as a drop-in replacement. A valid alternative must preserve the package footprint, pin functions, I/O voltage rules, configuration interface, memory interfaces, timing expectations, and programming support. Similarly, do not confuse the 208-pin PQFP target with related devices in 144-pin TQFP packages, which have fewer I/O and require PCB redesign. Confirm the bitstream target and device identification before production programming.
מידע על תאימות
The XA Spartan-3 family is identified as qualified to AEC-Q100. Product information lists the device as RoHS Compliant and Lead Free. No separate REACH, halogen-free, or conflict-minerals declaration was identified.