XC5VLX50T-2FFG665I - 46,080-Cell FPGA | AMD | Industrial
料号: XC5VLX50T-2FFG665I ✗ 停产XC5VLX50T-2FFG665I 概述
A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and configurable I/O behavior are defined after fabrication. FPGAs sit within programmable-logic devices and combine parallel programmable logic resources with dedicated hardware blocks. The Virtex-5 LXT family uses column-based ASMBL architecture and is positioned for high-performance signal processing, communications, embedded systems, and industrial control equipment.
Three principal characteristics define the XC5VLX50T-2FFG665I. Its 46,080 logic cells provide substantial parallel processing capacity, while 360 I/O provide extensive board-level connectivity. The -2 speed designation places it in the middle of the family’s performance grades. The device also belongs to the LXT platform, whose architecture supports programmable logic alongside dedicated FPGA resources for high-throughput implementations.
The 65 nm Virtex-5 architecture combines configurable logic with system-oriented hard resources. Family-level documentation describes 36-Kbit block RAM and FIFO storage, second-generation 25-by-18 DSP slices, SelectIO technology with digitally controlled impedance, ChipSync source-synchronous interfaces, system monitoring, and enhanced clock management. These resources allow designers to implement parallel algorithms, data pipelines, memory-intensive control functions, and high-speed external interfaces without implementing every function in soft logic.
Typical uses include industrial automation, communications infrastructure, test and measurement, defense electronics, signal processing, high-speed control, and embedded video systems. Its 360 I/O and large logic capacity are especially useful when a design must combine multiple buses, parallel data acquisition, on-board memory, and configurable logic on a single device. The industrial temperature designation supports designs operating from -40 °C to 100 °C.
Layout planning is critical because the 665-pin FCBGA requires a dense, multilayer PCB with controlled escape routing, power-plane geometry, and decoupling. Engineers should use the AMD Virtex-5 package pinout files when assigning signals and verify every power, ground, configuration, clock, and user I/O connection against the selected package artwork before fabrication.
This page consolidates the key device characteristics, package constraints, selectable same-family alternatives, application guidance, and design checks needed to evaluate the XC5VLX50T-2FFG665I for a new programmable-logic design.
直接替换替代料: XC5VLX50T-2FFG665I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC5VLX50T-2FFG665I (相同外形与封装尺寸) ——差异在于 Package, Speed Grade, Package Type, Device Type, Mounting Type.
XC5VLX50T-2FFG665C
✅ 直接替换联系询价
查看数据手册 →XC5VLX50T-3FFG665C
✅ 直接替换联系询价
查看数据手册 →XC5VLX50T-1FFG665I
✅ 直接替换联系询价
查看数据手册 →XC5VLX50T-1FFG665CES
✅ 直接替换联系询价
查看数据手册 →XC5VLX50T-2FFG665I 最大额定值与电气特性
| Device Type | Virtex-5 LXT field-programmable gate array |
| Programmable Logic Cells | 46,080 cells |
| Number of I/O | 360 I/O |
| Process Technology | 65 nm |
| Core Supply Voltage | 1 V |
| 封装 | 665-pin FCBGA |
| Package Dimensions | 27 mm x 27 mm |
| Terminal Count | 665 terminals |
| Product Speed Grade | -2 |
| 工作温度范围 | -40 °C to +100 °C |
| Architecture | Second-generation ASMBL column-based architecture |
| FPGA Subfamily | LXT |
| Block RAM | 36-Kbit block RAM and FIFO resources |
| DSP Slice | Second-generation 25 x 18 DSP slice |
| SelectIO Technology | Digitally controlled impedance |
| Source-Synchronous Interface | ChipSync |
| System Monitoring | System monitor functionality |
| Clock Management | Enhanced clock management |
| 安装类型 | Surface-mount FCBGA |
| RoHS 状态 | RoHS compliant |
| Lead-Free Status | Lead free |
XC5VLX50T-2FFG665I 27 mm x 27 mm 引脚配置指南
XC5VLX50T-2FFG665I(27 mm x 27 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC5VLX50T-2FFG665I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC5VLX50T-2FFG665I 适用于 6 应用s: Industrial Automation and PLC Control, Communications and Network Equipment, Digital Signal Processing, Test and Measurement Systems, Aerospace and Defense Controls, Embedded Video Processing.
Industrial Automation and PLC Control
The XC5VLX50T-2FFG665I fits industrial controllers that combine sequential logic, parallel data movement, and numerous external interfaces. Its 46,080 programmable logic cells can host control algorithms and protocol state machines, while 360 I/O connect sensors, actuators, encoders, and field-bus transceivers. The -40 °C to 100 °C industrial temperature range supports equipment operating across wide factory environments. The device's DSP slices and 36-Kbit block RAM can also support motion control, filtering, and local data buffering. Because this is a 665-pin FCBGA, the implementation should use a multilayer PCB with carefully partitioned power, ground, and signal layers.
推荐
Communications and Network Equipment
The XC5VLX50T-2FFG665I is suitable for communications infrastructure requiring parallel packet handling, high-speed interfaces, and deterministic programmable logic. SelectIO with digitally controlled impedance supports controlled board-level signaling, while ChipSync resources assist source-synchronous interface implementations. The 360 I/O provide substantial connectivity for multiple buses, status signals, and high-speed transceiver lanes. Designers can use block RAM for packet buffers and DSP slices for filtering or signal conditioning. Timing closure, I/O standards, clocking, and power integrity remain critical because a dense BGA FPGA can magnify small routing or return-path errors.
推荐
Digital Signal Processing
The XC5VLX50T-2FFG665I supports parallel digital signal-processing systems by combining configurable logic with dedicated 25 x 18 DSP slices. The DSP resources can implement fixed-point filters, correlation, modulation, and multiply-accumulate pipelines more efficiently than general fabric alone, while 36-Kbit block RAM supports local sample and coefficient storage. Its 360 I/O permit simultaneous acquisition and processing channels, although interface timing must be constrained against the selected clocking architecture. The -2 speed grade provides useful processing margin over the -1 option for designs that do not require the faster -3 grade or its associated power burden.
推荐
Test and Measurement Systems
The XC5VLX50T-2FFG665I fits parallel test and measurement instruments where acquisition logic, pattern generation, timing control, and data processing must operate concurrently. Its 46,080 logic cells can support multiple instrument channels, while DSP slices accelerate filtering, correlation, and numerical operations. The large I/O count simplifies connections to converters, memory, custom analog sections, and synchronization interfaces. A production instrument should account for the BGA package through symmetrical power distribution, dense via arrays, low-impedance return paths, and carefully modeled clock networks. Firmware should also preserve configuration integrity and include recovery mechanisms for mission-critical measurement equipment.
推荐
Aerospace and Defense Controls
The XC5VLX50T-2FFG665I can serve as the programmable control element in ruggedized aerospace, defense, and mission-equipment subsystems requiring extensive parallel logic and deterministic interfaces. Its industrial temperature specification, 360 I/O, DSP resources, and block RAM allow control, navigation-data processing, sensor fusion, and communications functions to be consolidated. Engineering qualification must assess radiation, vibration, temperature cycling, power transients, and component sourcing separately from the device's stated commercial specifications. Secure configuration loading, watchdog behavior, and fault containment should be included in the system architecture, while the dense FCBGA footprint requires advanced PCB and thermal validation.
推荐
Embedded Video Processing
The XC5VLX50T-2FFG665I is appropriate for embedded video systems that require parallel pixel pipelines, frame buffers, control logic, and external display or sensor interfaces. Block RAM resources can hold line or tile data, DSP slices can perform filtering and color-space operations, and the 360 I/O can connect image sensors, serializers, and display controllers. SelectIO and ChipSync features assist high-speed source-synchronous links, although panel and sensor timing must be matched exactly to the design constraints. The 665-pin FCBGA requires deliberate escape routing and power planning, and the final system should validate video timing across temperature, voltage, and process conditions before production release.
推荐
推荐产品汇总
工程参考数据: XC5VLX50T-2FFG665I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC5VLX50T-2FFG665C | XC5VLX50T-3FFG665C | XC5VLX50T-1FFG665I | XC5VLX50T-1FFG665C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 665-pin FCBGA | 665-pin FCBGA | 665-pin FCBGA | 665-pin FCBGA | 665-pin FCBGA |
| FPGA Family | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT |
| Programmable Logic Cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells | 46,080 cells |
| Number of I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O |
| Speed Grade | -2 | -2 | -3 | -1 | -1 |
| Temperature Grade | Industrial, -40 °C to +100 °C | Commercial | Commercial | Industrial | Commercial |
| Process Technology | 65 nm | 65 nm | 65 nm | 65 nm | 65 nm |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V |
| Special Feature | ChipSync, SelectIO, DSP slices, system monitor, enhanced clock management | Same Virtex-5 LXT feature family | Same Virtex-5 LXT feature family | Same Virtex-5 LXT feature family | Same Virtex-5 LXT feature family |
关键差异点
- Higher speed grade than the -1 FFG665 alternatives (对比 XC5VLX50T-1FFG665I)
- Lower speed demand than the -3 FFG665 alternative (对比 XC5VLX50T-3FFG665C)
- Industrial temperature suffix with the same core package architecture (对比 XC5VLX50T-2FFG665C)
设计说明
Use the AMD Virtex-5 package pinout files as the controlling source for the 665-pin FCBGA footprint. Verify each power, ground, configuration, clock, differential, and user I/O ball against the exact XC5VLX50T-2FFG665I order code. A dense BGA requires a multilayer PCB with short via escape paths, adequate via-in-pad or microvia strategy where permitted, and uninterrupted return paths. Complete signal-integrity and power-integrity simulations before fabrication, particularly for high-speed memory or transceiver interfaces.
Partition the 1 V core supply and other device rails into dedicated power planes with carefully designed decoupling. Place the smallest effective decoupling capacitors at the associated supply and ground balls using the manufacturer's recommended layout guidance, and connect them through short, low-inductance paths. Validate core-ripple limits, simultaneous switching current, transient response, and startup sequencing in simulation. Poor plane segmentation or long decoupling connections can compromise timing even when the nominal supply voltage is correct.
The 27 mm by 27 mm FCBGA requires thermal analysis at system level rather than a simple package-power estimate. Calculate worst-case FPGA dissipation for the selected speed grade, utilization, I/O activity, voltage, ambient temperature, and neighboring components. Use the package thermal data to select copper area, thermal vias, board construction, airflow, or heat-spreading measures. Perform post-layout thermal and power simulations because configuration, activity, and adjacent heat sources can materially change junction temperature.
合规信息
The product listing identifies RoHS-compliant and lead-free construction. No separate REACH, halogen-free, conflict-minerals, or automotive qualification statement is identified.