XC6SLX150-3FGG484I - 147,443 Logic Cell FPGA | AMD
料号: XC6SLX150-3FGG484I ✓ 量产中XC6SLX150-3FGG484I 概述
A field-programmable gate array is a programmable logic device in which configurable logic blocks, embedded block RAM, programmable I/O, and dedicated resources implement digital functions after configuration. An FPGA belongs to the broader semiconductor hierarchy of programmable logic devices, alongside CPLDs, while offering substantially greater logic, memory, and signal-routing capacity for communications, control, signal processing, and embedded systems.
The principal resources include 23,038 adaptive logic modules, 4.71 Mbit of embedded memory, 338 I/O, and a 484-ball package. The Spartan-6 family combines configurable logic with block RAM and dedicated DSP resources in a 45 nm CMOS implementation. These figures make the XC6SLX150 useful when a design needs more parallelism and on-chip memory than a compact CPLD can provide.
The FGG484 package exposes 484 package balls in a compact 19 x 19 mm footprint. Because it is a ball-grid array rather than a leaded package, PCB layout requires via-in-pad or via-under-ball escape routing where applicable, along with careful power and ground-plane construction. The device operates from a cited 1.2 V supply in the same 45 nm Spartan-6 technology family and uses a 0.80 mm ball pitch.
Typical applications include industrial networking equipment, video and image-processing pipelines, communications infrastructure, embedded control systems, sensor aggregation, and digital signal processing. The 667 MHz internal frequency, 23,038 adaptive logic modules, and 4.71 Mbit of embedded block RAM allow parallel datapaths, protocol engines, buffering, and control logic to share one programmable device.
Designers should confirm the complete AMD package pinout and power-decoupling requirements against the Spartan-6 package files and device data sheet. The 484-ball footprint also demands assembly-process capability for its 0.80 mm pitch, and power budgeting should include the device’s switching activity rather than relying only on nominal operating conditions.
This page combines the exact device identifiers, resource specifications, package characteristics, lifecycle information, replacement analysis, and engineering guidance needed to evaluate the XC6SLX150-3FGG484I before schematic capture, PCB layout, and prototype assembly.
直接替换替代料: XC6SLX150-3FGG484I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC6SLX150-3FGG484I (相同外形与封装尺寸) ——差异在于 Package Type, Device Type, Lead-Free Status, Package Dimensions, Speed Grade.
XC6SLX150-2FGG484I
✅ 直接替换📋 参考替代料(不在目录中)
XC6SLX150-2FGG484C
✅ 直接替换📋 参考替代料(不在目录中)
XC6SLX150-3FGG484C
✅ 直接替换📋 参考替代料(不在目录中)
XC6SLX150-3FG484C
✅ 直接替换联系询价
查看数据手册 →XC6SLX150-2FGG484C
✅ 直接替换📋 参考替代料(不在目录中)
XC6SLX150-3FGG484I 最大额定值与电气特性
| Device Type | Field-Programmable Gate Array (FPGA) |
| FPGA Family | Spartan-6 LX |
| Logic Cells | 147,443 cells |
| Adaptive Logic Modules | 23,038 ALMs |
| Embedded Memory | 4.71 Mbit |
| Number of I/O | 338 I/O |
| Internal Frequency | 667 MHz |
| Technology | 45 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -3 |
| Package Type | Lead-free CSBGA-484 |
| Package Pin Count | 484 pins |
| Package Dimensions | 19 x 19 mm |
| Package Pitch | 0.80 mm |
| 工作温度 | 0°C to 85°C |
| 安装类型 | Surface Mount |
| RoHS 状态 | RoHS Compliant |
| Lead-Free Status | Lead Free |
XC6SLX150-3FGG484I 0.80 mm 引脚配置指南
XC6SLX150-3FGG484I(0.80 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC6SLX150-3FGG484I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC6SLX150-3FGG484I 适用于 6 应用s: Industrial Networking Equipment, Video and Image Processing, Communications Infrastructure, Digital Signal Processing, Sensor Aggregation and Control, Embedded Instrumentation.
Industrial Networking Equipment
The XC6SLX150-3FGG484I fits industrial networking equipment requiring parallel packet processing and multiple external interfaces. Its 147,443 logic cells and 23,038 adaptive logic modules support protocol state machines, switching logic, traffic classification, and management functions, while 4.71 Mbit of embedded memory can implement FIFOs and packet buffers. The 338 I/O provide substantial board-level connectivity for transceivers, status signals, and control interfaces. The cited 667 MHz internal frequency supports timing-conscious designs, although the -3 grade requires careful timing closure.
推荐
Video and Image Processing
The XC6SLX150-3FGG484I is suitable for parallel video and image-processing pipelines because 23,038 adaptive logic modules can execute filtering, pixel manipulation, and format conversion concurrently. The available 4.71 Mbit of embedded block RAM is useful for line buffers, frame-level staging, and lookup data, while 338 I/O accommodate parallel pixel buses and control signals. The 667 MHz internal frequency enables faster logic-clock operation than lower cited Spartan-6 LX speed grades. System timing, memory bandwidth, and external-memory performance must still be evaluated during implementation.
推荐
Communications Infrastructure
The XC6SLX150-3FGG484I can support communications infrastructure blocks that combine high-speed programmable logic with embedded buffering. Its 147,443 logic cells are appropriate for framing, rate adaptation, channel processing, and supervisory functions, while the 4.71 Mbit embedded memory can reduce reliance on external buffering devices. The 338 I/O support wide parallel interfaces and board-level transceiver connections. Designers should use the AMD configuration and pinout documentation to confirm configuration pins, clocking resources, and the exact 484-ball layout before schematic release.
推荐
Digital Signal Processing
The XC6SLX150-3FGG484I accommodates parallel digital signal processing by combining 147,443 logic cells with 4.71 Mbit of embedded memory and 23,038 adaptive logic modules. Filtering, correlation, modulation, error detection, and sample-path control can be implemented as concurrent pipelines rather than a single sequential processor. Its cited 667 MHz internal frequency provides a high-performance operating point within the Spartan-6 LX family. Actual throughput depends on the selected clock, DSP and memory resources, pipeline architecture, and timing constraints, which should be reviewed with implementation reports.
推荐
Sensor Aggregation and Control
The XC6SLX150-3FGG484I is appropriate for industrial sensor aggregation, data conditioning, and machine-control logic. Its 338 I/O can accommodate multiple digital sensor inputs, actuators, counters, and status signals, while the large logic capacity supports filtering, protocol conversion, fault handling, and supervisory control. The 4.71 Mbit embedded memory can hold calibration tables or short histories for local processing. The cited 0°C to 85°C operating range requires an enclosure and thermal design that keeps the board within that range, while the 0.80 mm-pitch package requires suitable PCB and assembly capability.
推荐
Embedded Instrumentation
The XC6SLX150-3FGG484I fits embedded instrumentation that requires flexible acquisition logic, sequencing, local storage, and communication formatting. Its 147,443 logic cells can combine control logic, acquisition pipelines, calibration routines, and host-interface protocols, while 4.71 Mbit of embedded RAM can support temporary data storage and FIFOs. With 338 I/O and a cited 667 MHz internal frequency, the device accommodates parallel sensors and high-speed internal processing. Power integrity, decoupling, thermal margins, and configuration-boot behavior remain important implementation considerations for a reliable measurement platform.
推荐
推荐产品汇总
工程参考数据: XC6SLX150-3FGG484I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC6SLX150-2FGG484I | XC6SLX150-2FGG484C | XC6SLX150-3FGG484C | XC6SLX150-3FG484C | XC6SLX150-2FGG484C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FBGA-484 (FGG) | FBGA-484 (FGG) | FBGA-484 (FGG) | FBGA-484 (FGG) | FBGA-484 (FG) | FBGA-484 (FGG) |
| FPGA Family | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX |
| Speed Grade | -3 | -2 | -2 | -3 | -3 | -2 |
关键差异点
- Highest cited performance within the Spartan-6 LX speed-grade options (对比 XC6SLX150-2FGG484I)
- Exact industrial ordering option for the cited design (对比 XC6SLX150-3FGG484C)
- Higher I/O availability than the Spartan-6 LXT alternative (对比 XC6SLX150T-3FGG484I)
设计说明
The XC6SLX150-3FGG484I uses a 19 x 19 mm CSBGA with 0.80 mm pitch. Route every ball to a PCB land using the AMD package drawing, and verify that the fabrication and assembly process supports the specified ball pitch. Escape-routing density should be reviewed early because power, ground, configuration, clock, and user I/O balls can consume most of the available escape channels. A pin-assignment review should also occur before layout is finalized.
Plan the power rails from the AMD device power requirements rather than from FPGA resource counts alone. Place the required input and output decoupling capacitors directly beside the associated package balls, preserve short current paths, and use uninterrupted ground planes where possible. Separate noisy external supplies and clocks from sensitive configuration or signal paths. Validate the power tree against worst-case I/O activity because the consumed power can change with switching rate and implemented logic.
Use the package thermal model and the actual board stackup to evaluate junction temperature. The compact 19 x 19 mm package has many escape and power-routing constraints, so thermal performance depends heavily on the available copper and via arrangement. Estimate the required copper area and via count for the expected power dissipation, and avoid placing the device next to heat sources that could push its case temperature beyond the cited 0°C to 85°C operating range.
Do not treat the Spartan-6 LXT XC6SLX150T-3FGG484I as an automatic substitute for the LX target. The cited I/O counts differ by 42 positions, with 338 I/O for the LX device and 296 I/O for the LXT device. Also confirm the ordering suffix and speed grade when choosing an XC6SLX150 alternative. Re-run bitstream generation, timing analysis, pin constraints, and board-level validation after every device substitution.
合规信息
The device is identified as RoHS Compliant and Lead Free. REACH, halogen-free, and conflict-minerals status are unknown. The I ordering suffix denotes the industrial-temperature option, but no AEC-Q100 qualification is stated.