XC7K70T-2FBG484C - 65,600-Cell Kintex-7 FPGA | AMD Xilinx
料号: XC7K70T-2FBG484C ✗ 停产XC7K70T-2FBG484C 概述
A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and processing blocks are configured after manufacture. In the product hierarchy, an FPGA belongs to programmable logic devices, then digital programmable logic, and ultimately the broader semiconductor category. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed for protocol handling, signal processing, control logic, hardware acceleration, or interface bridging, allowing one physical design to support multiple system functions.
The Kintex-7 architecture provides a balanced combination of logic density, signal processing, memory, and connectivity for communications, industrial, imaging, and embedded systems. Its 65,600 logic cells and 285 user I/Os support complex parallel datapaths and external interfaces. The manufacturer documentation identifies MMCM and PLL resources for clock management, while the 484-ball package provides substantial I/O and power connectivity for high-speed board designs. The -2 performance grade is intended for designs requiring stronger timing performance than the -1 grade.
From a system perspective, the device can combine acquisition logic, filtering, protocol conversion, and interface control without partitioning those functions among multiple fixed chips. This integration reduces component count on boards with limited area and allows firmware or bitstream updates during product development. However, FPGA performance depends on the selected clock speed, I/O standards, memory interface configuration, routing congestion, and whether the design meets timing constraints after placement and routing.
Typical uses include wireless baseband processing, industrial automation, real-time video pipelines, network interface adaptation, test equipment, and custom hardware accelerators. In these systems, the XC7K70T-2FBG484C is valuable when designers need substantial parallel logic, flexible I/O, DSP resources, and field-updateable behavior. Designs requiring deterministic low-latency computation can implement pipelines directly in programmable logic, while clock-management resources support multiple internal and external clock domains.
PCB implementation requires careful power planning and signal-integrity control. The 1.00 mm pitch FCBGA needs a multilayer board with short return paths, appropriate decoupling, and controlled-impedance routing. Designers should follow the AMD package and board-design guidance for ball assignment, power and ground connectivity, thermal management, and high-speed transceiver layout. The dense package also makes assembly, inspection, and rework more demanding than a leaded or coarse-pitch package.
This product summary consolidates the exact ordering information, package characteristics, verified logic and I/O figures, same-package alternatives, comparison parameters, and practical implementation guidance into one engineering-focused reference. It also distinguishes package-identical speed and temperature-grade options, helping designers determine whether a substitute preserves the intended PCB footprint and system timing requirements.
直接替换替代料: XC7K70T-2FBG484C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC7K70T-2FBG484C (相同外形与封装尺寸) ——差异在于 Package, Logic Cells, Process Technology, Device Type, Temperature Grade.
XC7K70T-1FBG484C
✅ 直接替换联系询价
查看数据手册 →XC7K70T-1FBG484I
✅ 直接替换联系询价
查看数据手册 →XC7K70T-2FBG484I
✅ 直接替换📋 参考替代料(不在目录中)
XC7K70T-3FBG484E
✅ 直接替换联系询价
查看数据手册 →XC7K70T-2LFBG484C
✅ 直接替换📋 参考替代料(不在目录中)
XC7K70T-2FBG484C 最大额定值与电气特性
| Device Type | Kintex-7 Field-Programmable Gate Array (FPGA) |
| Logic Cells | 65,600 cells |
| Process Technology | 28 nm |
| User I/O Count | 285 I/Os |
| Package Type | 484-pin FCBGA |
| Package Code | FBG484 |
| Ball Pitch | 1.00 mm |
| Package Body Size | 23 mm x 23 mm |
| 电源电压 | 1 V |
| Speed Grade | -2 |
| Temperature Grade | C |
| Clock Management Resources | MMCM and PLL |
| Programming Type | Field-programmable |
| 安装类型 | Surface Mount |
| Shipping Format | Tray |
| Package Form | Lidless FCBGA |
XC7K70T-2FBG484C lidless fcbga 引脚配置指南
XC7K70T-2FBG484C(lidless fcbga 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC7K70T-2FBG484C.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC7K70T-2FBG484C 适用于 6 应用s: Wireless Baseband Processing, Industrial Automation and Control, Real-Time Video Processing, Network Interface Acceleration, Test and Measurement Instrumentation, Custom Hardware Acceleration.
Wireless Baseband Processing
The XC7K70T-2FBG484C fits wireless baseband designs that combine real-time filtering, symbol detection, packet control, and high-speed data movement in programmable logic. Its 65,600 logic cells provide substantial parallel processing capacity, while 285 user I/Os allow direct connection to converters, clocking devices, memory, and network transceivers. The -2 speed grade is valuable when critical paths in the datapath require tighter timing than a lower-speed grade can provide. Designers can implement parallel architectures and update the bitstream as protocols evolve without changing the physical FPGA. Final throughput and power must be validated against the selected clock rate, I/O standards, memory interface, and post-route timing report.
推荐
Industrial Automation and Control
The XC7K70T-2FBG484C is suitable for industrial control systems that combine deterministic machine control, sensor conditioning, protocol conversion, and supervisory logic. The 285 user I/Os support connections to sensors, motor-control stages, isolated communications, and digital I/O, while MMCM and PLL resources allow multiple clock domains to be generated inside the FPGA. Its -2 grade provides additional timing margin for complex control paths and parallel data acquisition. Designers should assign I/O standards according to each external interface, implement fail-safe behavior in hardware, and confirm operating-temperature requirements against the selected ordering suffix before releasing the design for production.
推荐
Real-Time Video Processing
The XC7K70T-2FBG484C can implement real-time video acquisition and processing as a configurable pipeline that reduces data movement between external processors. Its 65,600 logic cells can support parallel pixel operations, while the available DSP resources are appropriate for filtering and arithmetic stages. The 285 user I/Os provide connectivity for image sensors, parallel interfaces, memory, and display-processing links. Using the -2 speed grade can improve timing closure on wide datapaths, but sustained frame rate must be checked after synthesis and implementation. Clocking, line-buffer capacity, video timing, and output interface standards should be verified with the actual sensor and display architecture.
推荐
Network Interface Acceleration
The XC7K70T-2FBG484C is well suited to custom packet-processing, protocol-bridging, and high-throughput network interface accelerator functions. Its large logic capacity allows line-rate classification, header manipulation, queueing, and traffic shaping to be implemented in parallel rather than sequentially. The 285 user I/Os can connect the FPGA to external transceivers, memory, and host processors, and the clock-management resources support internally derived clocks. The -2 grade is appropriate when implementation timing is tight around wide buses and high-speed serial paths. Engineers should evaluate bandwidth after routing, include protocol error handling in hardware, and avoid assuming that nominal I/O count alone guarantees achievable network throughput.
推荐
Test and Measurement Instrumentation
The XC7K70T-2FBG484C supports programmable test and measurement systems requiring flexible acquisition, timing, pattern generation, and analysis functions. Its 65,600 logic cells can host parallel acquisition channels and control state machines, while MMCM and PLL resources support precise internal clock relationships. The -2 speed grade can improve timing margin for high-rate sampling and digital pattern paths. A practical implementation should preserve deterministic reset behavior, calibrate acquisition channels, and separate analog conditioning from the FPGA’s digital processing section. Because performance depends on the implementation and external memory system, the design team should confirm timing closure, channel-count requirements, and thermal behavior before selecting the final configuration.
推荐
Custom Hardware Acceleration
The XC7K70T-2FBG484C can serve as a configurable accelerator for algorithms that require parallel arithmetic, low-latency pipelines, or repeated bitstream updates. The Kintex-7 logic, DSP, and memory resources allow functions such as filtering, compression, cryptography, and signal analysis to be combined without external fixed-function logic. The 285 user I/Os support accelerator memory, control processors, and data-source interfaces, while the -2 grade provides additional timing headroom over a -1 implementation. Developers should compare accelerator throughput against ASIC or processor solutions, evaluate configuration overhead, and include tool-supported timing and power reports in the architecture decision. The final design must be revalidated if the replacement suffix changes speed or temperature characteristics.
推荐
推荐产品汇总
工程参考数据: XC7K70T-2FBG484C ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC7K70T-1FBG484C | XC7K70T-1FBG484I | XC7K70T-2FBG484I | XC7K70T-3FBG484E | XC7K70T-2LFBG484C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 484-pin FCBGA (FBG484) | 484-pin FCBGA (FBG484) | 484-pin FCBGA (FBG484) | 484-pin FCBGA (FBG484) | 484-pin FCBGA (FBG484) | 484-pin FCBGA (FBG484) |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Logic Cells | 65,600 cells | 65,600 cells | 65,600 cells | 65,600 cells | 65,600 cells | 65,600 cells |
| User I/O Count | 285 I/Os | 285 I/Os | 285 I/Os | 285 I/Os | 285 I/Os | 285 I/Os |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Speed Grade | -2 | -1 | -1 | -2 | -3 | -2 |
| Temperature-Grade Suffix | C | C | I | I | E | C |
| Nominal Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Ball Pitch | 1.00 mm | 1.00 mm | 1.00 mm | 1.00 mm | 1.00 mm | 1.00 mm |
关键差异点
- Maintains the -2 performance grade while offering a package-identical temperature-grade option (对比 XC7K70T-2FBG484I)
- Provides one performance bin above the lower-speed FBG484 option (对比 XC7K70T-1FBG484C)
- Offers a higher speed-grade alternative with identical package geometry (对比 XC7K70T-3FBG484E)
设计说明
Design the board around the FBG484 1.00 mm-pitch ball grid and the manufacturer package outline rather than relying on a generic BGA footprint. Provide multilayer power and ground planes, route each supply rail directly to the relevant balls, and place local high-frequency decoupling close to the device. Use the AMD package pinout files to verify every ball assignment, power grouping, and exposed thermal connection before releasing the CAD library.
Create the power tree from the actual post-implementation utilization report rather than from FPGA resource names alone. Include core, auxiliary, and I/O supply requirements in the budget, account for startup current, and verify regulator tolerance and sequencing against the AMD power-supply guidance. If multiple voltage rails are used, implement deterministic ramp and monitoring so the FPGA does not enter an invalid state when a rail falls outside its operating condition.
Use the thermal characterization for the exact package, speed grade, and PCB stack-up when estimating junction temperature. The 23 mm by 23 mm FCBGA can move substantial heat through its ball array and board copper, but actual dissipation depends on logic utilization, switching activity, I/O activity, clock rate, and airflow. Estimated: combine implementation power with the board-specific thermal resistance, then add ambient temperature to determine margin to the selected device’s maximum junction rating.
Route clocks and high-speed interfaces with continuous return paths and controlled impedance, and keep configuration, JTAG, clock, reset, and reference signals away from noisy power-conversion regions. MMCM and PLL outputs should be routed with matched topology, and any external memory interface must be analyzed for skew and edge quality. Validate timing through post-route simulation and board-level measurements rather than relying only on schematic connectivity.
合规信息
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements are included in the product records. The target is an FPGA rather than an automotive-qualified device.