XCKU035-1FFVA1156I - Kintex UltraScale FPGA, 444K Cells, FCBGA-1156 | AMD
料号: XCKU035-1FFVA1156I ✓ 量产中XCKU035-1FFVA1156I 概述
A field programmable gate array (FPGA) is a reconfigurable digital integrated circuit whose logic, memory and I/O resources are defined by a bitstream loaded at power-up. Within the semiconductor hierarchy an FPGA sits above fixed-function logic and below the SoC class of devices: it occupies the FPGA and CPLD tier of programmable logic, offering the highest parallelism of any programmable silicon while remaining programmable at the field level. A Kintex UltraScale device adds hard 100G Ethernet, PCIe Gen3, DDR4 memory interfaces, high-speed transceivers and DSP blocks to the programmable fabric, so a single device can consolidate what previously required an FPGA plus several discrete companions.
Key differentiators of this -1 speed grade part include the 520 I/O count, which allows dense board-level connectivity without a companion ASIC, and the FFVA1156 fine-pitch ball grid array, whose 1 mm pitch keeps a 35 mm square footprint while exposing 1156 balls for power, configuration and high-speed pairs. The -1 speed suffix denotes the industrial temperature grade performance point, and the trailing I marks the industrial temperature variant, making this part suitable for industrial, telecommunications and aerospace-adjacent equipment where -40 C to 100 C operation is required.
Technically the device combines a 20 nm logic fabric with dedicated hard blocks: DSP slices for fixed- and floating-point filtering, block RAM for on-chip buffering, and multi-gigabit transceivers with programmable equalization for serial links. Because UltraScale uses a 16-bit register architecture with dedicated carry chains, pipelined DSP chains and 4.6 Gb/s or faster transceiver rates depend on the exact -1 grade and fabric speed grade; consult the AMD product table for the definitive per-pin and per-block performance figures before committing to a timing budget.
Typical deployments include 4G/5G and 5G baseband radio equipment, high-speed data acquisition, industrial vision and machine-vision inspection, test and measurement instrumentation, video encoding and decoding, and secure network appliances that need hardware root of trust and encryption engines.
The principal design consideration is power and thermal management: a device of this density can draw well over 20 W at -1 speed grade with all transceivers active, so the board needs a solid multi-layer ground plane, a dense power-distribution network, and copper pours under the BGA that act as the heat spreader. Decoupling must follow the AMD published power distribution network guidance closely, since transient current on the 0.95 V core rail is the primary cause of unexpected jitter in high-speed interfaces.
This page consolidates distributor availability, pin-compatible and drop-in migration options in the same FFVA1156 footprint, and practical layout guidance so engineers can evaluate the XCKU035-1FFVA1156I against lower-density Kintex and mid-density UltraScale+ devices without relying on the manufacturer datasheet alone.
直接替换替代料: XCKU035-1FFVA1156I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XCKU035-1FFVA1156I (相同外形与封装尺寸) ——差异在于 Package Type, Temperature Grade, RoHS Status, Device Type, Logic Cells.
XCKU035-2FFVA1156I
✅ 直接替换联系询价
查看数据手册 →XCKU035-1FFVA1156C
✅ 直接替换联系询价
查看数据手册 →XCKU035-1FFVA1156C7007
✅ 直接替换📋 参考替代料(不在目录中)
XCKU035-L1FFVA1156I
✅ 直接替换📋 参考替代料(不在目录中)
XCKU095-FFVA1156
✅ 直接替换📋 参考替代料(不在目录中)
XCKU035-1FFVA1156I 最大额定值与电气特性
| Device Family | Kintex UltraScale FPGA |
| Programmable Logic Cells | 444,343 cells |
| User I/O Count | 520 I/O |
| Package Type | 1156-BBGA, FCBGA (fine-pitch ball grid array) |
| Package Body Size | 35 mm x 35 mm |
| Ball Pitch | 1 mm |
| Total Terminals / Balls | 1156 |
| Process Technology | 20 nm |
| Core Supply Voltage | 0.95 V |
| Speed Grade | -1 |
| Temperature Grade | Industrial |
| Device Category | FPGA - Field Programmable Gate Array |
| 安装类型 | Surface mount, BGA ball terminal |
| Package Shape | Square |
| RoHS 状态 | Compliant (RoHS details listed by distributor) |
XCKU035-1FFVA1156I square 引脚配置指南
XCKU035-1FFVA1156I(square 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XCKU035-1FFVA1156I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XCKU035-1FFVA1156I 适用于 6 应用s: 5G and 4G Baseband Radio Processing, High-Speed Data Acquisition and Real-Time Signal Processing, Industrial Machine Vision and Inspection, Network Packet Processing and Security Appliances, Test and Measurement Instrumentation, Video Encoding, Decoding and Broadcast Infrastructure.
5G and 4G Baseband Radio Processing
The XCKU035-1FFVA1156I suits baseband and radio unit designs that need dense parallel datapaths plus high-speed serial links in one device. Its 444,343 programmable logic cells absorb the large multiply-accumulate filter chains used in digital front-end and channel decoding, while the dedicated DSP blocks offload the fixed-point butterfly and FIR work that would otherwise consume fabric. The 520 user I/O gives room for parallel interface buses to DSP co-processors and for DDR4 memory interfaces to buffer symbol streams, and the bank architecture lets DDR4, high-speed serial and low-voltage logic coexist on the same die. The practical trade-off is thermal: a fully active design at the -1 speed grade can dissipate in the tens of watts, so the board must use a multi-layer stack-up with a solid ground plane, copper pours beneath the 1156-ball BGA and a forced-air or conduction path out of the package.
推荐
High-Speed Data Acquisition and Real-Time Signal Processing
For wideband capture and real-time analysis, the XCKU035-1FFVA1156I combines large parallel fabric capacity with 520 user I/O that can host multiple high-speed ADC and DAC data paths directly on the device. Block RAM resources act as on-chip ping-pong buffers between converters and the processing fabric, avoiding a round trip to external memory for every sample block, and the DSP slices handle decimation filters and FFT stages at rates far above what soft logic alone would sustain. The 0.95 V core with separated auxiliary and I/O bank rails means converter interfaces can run at their own voltage while the core stays clean. The cost of that flexibility is a demanding layout: high-speed converter data lines must be length-matched and referenced carefully on a 35 mm x 35 mm FCBGA, and decoupling has to follow the AMD power distribution network guidance for this package to keep supply noise off the acquisition path.
推荐
Industrial Machine Vision and Inspection
Machine-vision inspection heads and industrial imaging controllers use the XCKU035-1FFVA1156I to run multi-camera image pipelines, defect classification and motion compensation in a single device. The 444,343 logic cells hold line buffers, frame stitching and colour-processing pipelines in parallel rather than time-multiplexed, and the 520 I/O allow several camera interfaces plus encoder, trigger and strobe signals to be tied up without a companion bridge FPGA. Industrial enclosure temperatures make the industrial-grade ordering code the natural fit, since the trailing I of XCKU035-1FFVA1156I is specified for industrial ambient ranges rather than the commercial grade used in XCKU035-1FFVA1156C. Two engineering cautions matter here: the -1 speed grade is the lower performance bin, so tight image-processing deadlines should be checked against timing margins early, and factory-floor electrical noise makes robust decoupling and grounding non-negotiable.
推荐
Network Packet Processing and Security Appliances
Network and security appliances need line-rate packet handling with hardware-grade cryptography, and the XCKU035-1FFVA1156I offers the fabric area, the 520 I/O and the high-speed transceivers needed to terminate multiple ports and forward traffic without an external ASIC. Dedicated block RAM and hard DSP resources absorb per-packet parsing, hashing and buffer management, while the device's integrated security engines support encryption, hashing and a hardware root of trust for boot and key storage, which matters for appliances sold into regulated networks. The 1156-ball FCBGA keeps the design to a single 35 mm square footprint and lets designers place DDR4 memory interfaces close to the associated logic for low-latency buffer access. Because the -1 speed grade is the lower bin, forwarding paths at line rate need a timing margin review, and the board must handle a sustained high-power operating point with a proper heat-spreading layer stack.
推荐
Test and Measurement Instrumentation
Precision test and measurement equipment uses the XCKU035-1FFVA1156I to implement wideband channelization, calibration routines and digital signal processing in a single instrument, replacing what would otherwise be a DSP plus an FPGA plus a controller. The large fabric handles parallel data paths for several channels at once, the DSP blocks accelerate filters and transforms, and the 520 user I/O accommodates external reference clocks, trigger inputs and wide parallel buses to data converters and front-end modules. Industrial temperature grading keeps the instrument reliable in unheated equipment rooms and production test bays, where ambient swings are common. Two things to plan early: the -1 speed grade limits how much timing margin is available in the tightest paths, and an instrument of this density needs careful analog/digital partitioning so converter reference planes do not share return paths with the switching core rails.
推荐
Video Encoding, Decoding and Broadcast Infrastructure
Broadcast and professional video infrastructure benefits from the XCKU035-1FFVA1156I because video pipelines are wide, parallel and timing-hungry, which is exactly the profile of a large register-based fabric with 444,343 logic cells and hard DSP. Frame buffers, colour-space conversion, scaling and deblocking can be placed in parallel rather than serialized, and the high-speed transceivers move streams to and from memory and network fabrics with far less overhead than soft logic would impose. The 520 I/O also accommodate multiple parallel video interfaces and multi-rate audio alongside the main video path. Because the device is a 35 mm square FCBGA with high sustained power, video appliances need a chassis design that pulls heat away from the package rather than merely relying on board area, and the pin planning must place memory interfaces according to the AMD FFVA1156 guidance so the routing channels remain legal.
推荐
推荐产品汇总
工程参考数据: XCKU035-1FFVA1156I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XCKU035-2FFVA1156I | XCKU035-1FFVA1156C | XCKU035-1FFVA1156C7007 | XCKU035-L1FFVA1156I | XCKU095-FFVA1156 |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 1156-BBGA, FCBGA (35 mm x 35 mm) | 1156-BBGA, FCBGA - identical | 1156-BBGA, FCBGA - identical | 1156-BBGA, FCBGA - identical | 1156-BBGA, FCBGA - identical | 1156-BBGA, FCBGA - identical |
| User I/O Count | 520 I/O | 520 I/O | 520 I/O | 520 I/O | 520 I/O | 520 I/O |
| Process Technology | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm | 20 nm |
| Core Supply Voltage | 0.95 V | 0.95 V | 0.95 V | 0.95 V | 0.95 V | 0.95 V |
| Total Balls / Terminals | 1156 | 1156 | 1156 | 1156 | 1156 | 1156 |
| Package Body Size | 35 mm x 35 mm | 35 mm x 35 mm | 35 mm x 35 mm | 35 mm x 35 mm | 35 mm x 35 mm | 35 mm x 35 mm |
| RoHS Status | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant |
关键差异点
- Same-die, same-package alternatives keep the exact 1156-ball footprint (对比 XCKU035-2FFVA1156I)
- Industrial temperature rating suits unheated and outdoor equipment (对比 XCKU035-1FFVA1156C)
- Density upgrade path stays inside the same board outline (对比 XCKU095-FFVA1156)
- Extended temperature option available for harsher environments (对比 XCKU035-L1FFVA1156I)
设计说明
The FFVA1156 package splits the device into a 0.95 V core rail and separately supplied auxiliary and I/O bank rails. Treat each supply group as its own power island: distribute the core through a dense multi-layer grid, and give each I/O bank its own filtered rail so that bank voltage selection stays local. Bulk and high-frequency ceramic decoupling must be placed close to the BGA balls of the rail it serves, following the AMD power distribution network reference for the FFVA1156 package, because configuration-time core current steps are the dominant source of supply droop and consequent jitter on high-speed interfaces. Use the AMD power estimator with your real utilization and speed grade before freezing the regulator set.
A 35 mm x 35 mm FCBGA with roughly 444,343 logic cells dissipates substantial power at the -1 speed grade, especially with all transceivers active. The dominant thermal path is through the board, so stack the PCB with a solid ground plane and continuous copper pours under the entire BGA footprint, using the inner layers as a spreader, and avoid cutting thermal relief slots around the device. Keep switching regulators, inductors and other hot components away from the underside of the package, and provide either forced air or a conduction path to a chassis heat sink. Validate with thermal simulation before tooling the enclosure, since changing the speed grade later also changes the dissipated power.
Do not rely on a two-layer or thin stack-up for this device. A minimum of eight layers with dedicated plane layers and a short via path from each BGA ball to the plane is what keeps the 0.95 V rail's transient current inside acceptable limits and reduces loop inductance on the core supply. Place the configuration pins and any used dedicated pins according to the AMD package pinout files for FFVA1156 rather than by convention, since the ball map of a 1156-ball FCBGA cannot be inferred. Also check the pin placement constraints for memory interfaces and clock regions against the AMD package documentation, because illegal placements can force a placement change late in the layout phase.
High-speed transceiver pairs and memory interfaces on this device demand controlled reference-plane geometry. Keep the package ball assignments and the board layer stack matched to the AMD FFVA1156 guidance, provide continuous reference planes under every high-speed pair, and avoid any plane splits or anti-pads under differential pairs. For sensitive analog or RF-adjacent front ends that share the board with the FPGA, separate the return currents so converter and FPGA switching noise does not couple into the signal path. When migrating between FFVA1156 devices, re-plan pin placement rather than copying an existing placement blindly, since the larger die changes the legal memory and clock region assignments.
Three mistakes recur on Kintex UltraScale designs: assuming the -1 and -2 grades are interchangeable without re-running timing and power analysis, assuming the commercial C suffix is equivalent to the industrial I suffix in an unheated enclosure, and treating a 1156-ball footprint as generic. A speed-grade change shifts both timing margins and dissipated power; a temperature-grade change can invalidate a product in a cold enclosure or a hot cabinet; and the FFVA1156 ball map must be taken from the AMD package pinout files. Verify the ordering code against your environmental requirement and your timing closure before releasing the design to fabrication.
合规信息
RoHS compliance is indicated in the distributor product listing for this ordering code. The device is a programmable logic IC rather than an automotive-qualified component, so AEC-Q100 does not apply. REACH, lead-free finish, halogen-free and conflict-minerals declarations were not present in the available product documentation and are recorded as unknown.