XCKU15P-2FFVA1156I - Kintex UltraScale+ FPGA | AMD
料号: XCKU15P-2FFVA1156I ✓ 量产中XCKU15P-2FFVA1156I 概述
A field-programmable gate array is a semiconductor device whose digital circuits are defined by a configuration bitstream rather than permanent mask changes. The FPGA hierarchy progresses from individual programmable logic blocks to routing and I/O resources, then to a complete programmable logic device. Kintex UltraScale+ devices combine substantial parallel processing resources with dedicated memory, transceiver, and clocking capabilities, allowing one package to implement control logic, protocol bridges, digital signal processing, and hardware accelerators.
The XCKU15P provides 1,143,450 logic cells and 522,720 programmable blocks according to its product listings. Its 34,600 Kbit of block RAM supports packet buffering, data-plane storage, waveform capture, and general-purpose on-chip buffering. The 516 user I/O support high-pin-count board-level integration, while the FCBGA-1156 package is intended for multilayer PCB layouts with dense escape routing and controlled power and ground distribution.
The -2 designation identifies the device speed grade. Within the Kintex UltraScale+ family, speed-grade differences affect timing performance while preserving the broader architecture and resource organization. AMD describes the family around high-end connectivity, including support for 100G connectivity cores. Exact I/O standards, transceiver counts, pinout assignments, and power requirements depend on the selected bank and must be checked against the AMD package-pinout files before schematic or PCB release.
Typical applications include 100G networking equipment, high-throughput data acquisition, industrial vision, defense systems, test and measurement platforms, and accelerator-assisted computing. The large logic and memory resources allow parallel pipelines to be implemented in FPGA fabric, while the high-speed package and extensive I/O support board-level connectivity to processors, memory, optical modules, and custom peripherals.
A critical design consideration is the package power architecture. The multi-rail device requires planned voltage sequencing, suitable point-of-load regulation, and comprehensive decoupling. Use the AMD package-pinout files, device guidance, and Vivado implementation results to assign every ball and power rail; do not infer FCBGA-1156 connectivity from a generic BGA symbol library.
This page combines AMD family positioning, exact order-code details, package-aware substitution guidance, comparison parameters, and practical design notes. It helps engineers distinguish speed-grade and temperature-grade options while preserving the FCBGA-1156 footprint and identifying where complete ball-level equivalence must be confirmed.
直接替换替代料: XCKU15P-2FFVA1156I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XCKU15P-2FFVA1156I (相同外形与封装尺寸) ——差异在于 Package, Speed Grade, Block RAM, Process Technology.
XCKU15P-1FFVA1156I
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XCKU15P-3FFVA1156I
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XCKU15P-2FFVA1156E
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XCKU15P-2FFVA1156C
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XCKU15P-3FFVA1156E
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XCKU15P-2FFVA1156I 最大额定值与电气特性
| Device Type | Kintex UltraScale+ FPGA |
| Logic Cells | 1,143,450 cells |
| Programmable Blocks | 522,720 blocks |
| Block RAM | 34,600 Kbit |
| Core Supply Voltage | 0.85 V |
| User I/O | 516 I/O |
| 封装 | FCBGA-1156 |
| Speed Grade | -2 |
| Process Technology | 16 nm FinFET |
| Connectivity Class | Up to 100G connectivity cores |
| 安装类型 | Surface mount |
XCKU15P-2FFVA1156I fcbga-1156 引脚配置指南
XCKU15P-2FFVA1156I(fcbga-1156 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XCKU15P-2FFVA1156I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XCKU15P-2FFVA1156I 适用于 6 应用s: 100G Networking Infrastructure, Industrial Vision and Image Processing, High-Speed Data Acquisition, Test and Measurement Instrumentation, Aerospace and Defense Processing, Data Center Acceleration.
100G Networking Infrastructure
The XCKU15P-2FFVA1156I fits 100G networking infrastructure that requires substantial parallel logic, packet buffering, and high-speed board connectivity. AMD identifies Kintex UltraScale+ as supporting up to 100G connectivity cores, while the device provides 1,143,450 logic cells, 522,720 programmable blocks, and 34,600 Kbit of block RAM. These resources can support packet classification, queue management, protocol conversion, monitoring, and test logic. The 516 user I/O also permit extensive board-level integration, although the exact transceiver and I/O configuration must match the selected device variant. Vivado timing closure and the FCBGA-1156 power plan remain essential for reliable 100G operation.
推荐
Industrial Vision and Image Processing
The XCKU15P-2FFVA1156I is suitable for industrial vision systems requiring parallel pixel processing and real-time filtering. Its 1,143,450 logic cells can support multiple parallel pipelines, while 34,600 Kbit of block RAM can buffer image lines, reference frames, or feature maps. The 516 user I/O are useful for connecting cameras, sensors, memory interfaces, and trigger logic. Because image throughput can make thermal and power behavior design-dependent, engineers should evaluate utilization-dependent power in Vivado and implement the recommended multi-rail sequencing and decoupling. The -2 speed grade should be selected only after confirming that timing margins meet the camera and processing pipeline requirements.
推荐
High-Speed Data Acquisition
The XCKU15P-2FFVA1156I supports high-speed data-acquisition architectures that combine parallel converters, memories, and real-time analysis. Its large programmable logic capacity can implement digital filtering, decimation, trigger logic, and packetization, while 34,600 Kbit of block RAM provides local buffering for high-throughput channels. The 516 I/O support broad connectivity when the selected bank standards match the acquisition interface. Engineers should use AMD package-pinout files to assign high-speed inputs, configure clocking, and separate sensitive analog-adjacent regions. Post-layout timing, power estimation, and signal-integrity analysis are necessary before treating the acquisition path as production-ready.
推荐
Test and Measurement Instrumentation
The XCKU15P-2FFVA1156I fits modular test and measurement instruments requiring parallel acquisition, real-time analysis, and extensive control I/O. Its 1,143,450 logic cells can support channel processing, timing analysis, waveform generation, and protocol-specific test logic, while the 34,600 Kbit of block RAM can hold captured samples or reference tables. The FCBGA-1156 package offers 516 user I/O for dense instrumentation but demands careful escape routing and multilayer power distribution. Designers should separate sensitive measurement paths from switching supplies and digital return currents, then validate implementation timing and operating temperature against the instrument enclosure's worst-case environment.
推荐
Aerospace and Defense Processing
The XCKU15P-2FFVA1156I can support parallel processing in aerospace, defense, and mission-critical electronic systems where programmable logic, memory, and high-speed interfaces are required. Its 1,143,450 logic cells allow configurable signal processing, control, and data-reduction architectures, while the 516 I/O enable integration with converters, memory, and communication equipment. Actual qualification requires the applicable AMD device grade, environmental documentation, reliability analysis, and customer-specific controls; the ordering suffix alone is not a substitute for a system qualification plan. Designers should also assess radiation effects, configuration integrity, and temperature coverage through the appropriate AMD documentation and mission assurance process.
推荐
Data Center Acceleration
The XCKU15P-2FFVA1156I is suitable for data-center and accelerator workloads that benefit from parallel FPGA processing. The 1,143,450 logic cells and 522,720 programmable blocks provide substantial compute flexibility for packet processing, compression, analytics, and custom datapaths, while 34,600 Kbit of block RAM can accelerate local buffering and streaming operations. The high-pin-count FCBGA-1156 package enables wide memory and network connectivity on a complex multilayer board. Deployment should be evaluated against the selected transceiver resources, power budget, and thermal design. Use Vivado resource and power reports to ensure that a practical utilization target and sustained operating condition are achieved rather than relying on raw logic-cell counts alone.
推荐
推荐产品汇总
工程参考数据: XCKU15P-2FFVA1156I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XCKU15P-1FFVA1156I | XCKU15P-3FFVA1156I | XCKU15P-2FFVA1156E | XCKU15P-2FFVA1156C | XCKU15P-3FFVA1156E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FCBGA-1156 | FCBGA-1156 | FCBGA-1156 | FCBGA-1156 | FCBGA-1156 | FCBGA-1156 |
| Device Family | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ |
| Speed Grade | -2 | -1 | -3 | -2 | -2 | -3 |
| Temperature-Grade Suffix | I | I | I | E | C | E |
| Logic Cells | 1,143,450 cells | 1,143,450 cells | 1,143,450 cells | 1,143,450 cells | 1,143,450 cells | 1,143,450 cells |
| Programmable Blocks | 522,720 blocks | 522,720 blocks | 522,720 blocks | 522,720 blocks | 522,720 blocks | 522,720 blocks |
| Block RAM | 34,600 Kbit | 34,600 Kbit | 34,600 Kbit | 34,600 Kbit | 34,600 Kbit | 34,600 Kbit |
| Core Supply Voltage | 0.85 V | 0.85 V | 0.85 V | 0.85 V | 0.85 V | 0.85 V |
| User I/O | 516 I/O | 516 I/O | 516 I/O | 516 I/O | 516 I/O | 516 I/O |
| Process Technology | 16 nm FinFET | 16 nm FinFET | 16 nm FinFET | 16 nm FinFET | 16 nm FinFET | 16 nm FinFET |
关键差异点
- Balanced -2 timing tier within the Kintex UltraScale+ family (对比 XCKU15P-1FFVA1156I)
- Preserves the -2 speed position with a different temperature-grade suffix (对比 XCKU15P-2FFVA1156E)
- Supports the full high-density XCKU15P implementation (对比 XCKU11P-2FFVA1156I)
设计说明
Plan the XCKU15P-2FFVA1156I as a multi-rail system rather than treating the 0.85 V core value as the complete power requirement. Use the AMD device guidance to identify VCCINT, VCCAUX, VCCBRAM, VCCO, and other assigned balls in the FFVA1156 package. Sequence the rails in the documented order, verify regulator startup and shutdown behavior, and place the prescribed high-frequency and bulk decoupling directly at the relevant supply and ground balls.
Do not build the FCBGA-1156 footprint from a generic BGA library. Download the AMD UltraScale package-device pinout files, select the exact FFVA1156 data, and use the package file to cross-check every ball, reserved location, power region, and exposed thermal land. Confirm stack-up, escape-routing layers, via-in-pad construction, solder mask, and thermal-via requirements against AMD and assembly-facility guidance before fabrication.
Estimated: the power dissipation of the XCKU15P-2FFVA1156I depends on speed grade, utilization, voltage, temperature, and enabled I/O, so no single wattage can be assigned without a specific design. Run Vivado power estimation with realistic clocking and resource utilization, then compare the result with the package thermal data and board heat-removal capability. Validate the final assembly using a system-level thermal calculation rather than relying on logic-cell count alone.
Treat high-speed I/O and memory interfaces as constrained paths rather than ordinary digital nets. Use the package pinout and UG575 guidance for differential-pair polarity, bank VCCO assignments, clock-capable inputs, and reference-clock routing. Keep return paths continuous through the stack-up, control crosstalk around high-speed nets, and run post-route timing and signal-integrity sign-off with the actual board constraints before release.
合规信息
Current environmental declarations and qualification details must be confirmed for the exact AMD order code. AEC-Q100 is not an appropriate classification for this general-purpose industrial FPGA.