XCKU15P-2FFVA1156I - Kintex UltraScale+ FPGA | AMD
부품 번호: XCKU15P-2FFVA1156I ✓ 활성XCKU15P-2FFVA1156I 개요
A field-programmable gate array is a semiconductor device whose digital circuits are defined by a configuration bitstream rather than permanent mask changes. The FPGA hierarchy progresses from individual programmable logic blocks to routing and I/O resources, then to a complete programmable logic device. Kintex UltraScale+ devices combine substantial parallel processing resources with dedicated memory, transceiver, and clocking capabilities, allowing one package to implement control logic, protocol bridges, digital signal processing, and hardware accelerators.
The XCKU15P provides 1,143,450 logic cells and 522,720 programmable blocks according to its product listings. Its 34,600 Kbit of block RAM supports packet buffering, data-plane storage, waveform capture, and general-purpose on-chip buffering. The 516 user I/O support high-pin-count board-level integration, while the FCBGA-1156 package is intended for multilayer PCB layouts with dense escape routing and controlled power and ground distribution.
The -2 designation identifies the device speed grade. Within the Kintex UltraScale+ family, speed-grade differences affect timing performance while preserving the broader architecture and resource organization. AMD describes the family around high-end connectivity, including support for 100G connectivity cores. Exact I/O standards, transceiver counts, pinout assignments, and power requirements depend on the selected bank and must be checked against the AMD package-pinout files before schematic or PCB release.
Typical applications include 100G networking equipment, high-throughput data acquisition, industrial vision, defense systems, test and measurement platforms, and accelerator-assisted computing. The large logic and memory resources allow parallel pipelines to be implemented in FPGA fabric, while the high-speed package and extensive I/O support board-level connectivity to processors, memory, optical modules, and custom peripherals.
A critical design consideration is the package power architecture. The multi-rail device requires planned voltage sequencing, suitable point-of-load regulation, and comprehensive decoupling. Use the AMD package-pinout files, device guidance, and Vivado implementation results to assign every ball and power rail; do not infer FCBGA-1156 connectivity from a generic BGA symbol library.
This page combines AMD family positioning, exact order-code details, package-aware substitution guidance, comparison parameters, and practical design notes. It helps engineers distinguish speed-grade and temperature-grade options while preserving the FCBGA-1156 footprint and identifying where complete ball-level equivalence must be confirmed.
드롭인 대체품: XCKU15P-2FFVA1156I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XCKU15P-2FFVA1156I (동일 폼 팩터 및 풋프린트) — 차이점: Package, Speed Grade, Block RAM, Process Technology.
XCKU15P-1FFVA1156I
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XCKU15P-3FFVA1156I
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XCKU15P-2FFVA1156E
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XCKU15P-2FFVA1156C
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XCKU15P-3FFVA1156E
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XCKU15P-2FFVA1156I 최대 정격 & 전기적 특성
| Device Type | Kintex UltraScale+ FPGA |
| Logic Cells | 1,143,450 cells |
| Programmable Blocks | 522,720 blocks |
| Block RAM | 34,600 Kbit |
| Core Supply Voltage | 0.85 V |
| User I/O | 516 I/O |
| 패키지 | FCBGA-1156 |
| Speed Grade | -2 |
| Process Technology | 16 nm FinFET |
| Connectivity Class | Up to 100G connectivity cores |
| 실장 유형 | Surface mount |
XCKU15P-2FFVA1156I fcbga-1156 핀 구성 가이드
XCKU15P-2FFVA1156I(fcbga-1156 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XCKU15P-2FFVA1156I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XCKU15P-2FFVA1156I 적합 용도: 6 애플리케이션s: 100G Networking Infrastructure, Industrial Vision and Image Processing, High-Speed Data Acquisition, Test and Measurement Instrumentation, Aerospace and Defense Processing, Data Center Acceleration.
100G Networking Infrastructure
The XCKU15P-2FFVA1156I fits 100G networking infrastructure that requires substantial parallel logic, packet buffering, and high-speed board connectivity. AMD identifies Kintex UltraScale+ as supporting up to 100G connectivity cores, while the device provides 1,143,450 logic cells, 522,720 programmable blocks, and 34,600 Kbit of block RAM. These resources can support packet classification, queue management, protocol conversion, monitoring, and test logic. The 516 user I/O also permit extensive board-level integration, although the exact transceiver and I/O configuration must match the selected device variant. Vivado timing closure and the FCBGA-1156 power plan remain essential for reliable 100G operation.
추천
Industrial Vision and Image Processing
The XCKU15P-2FFVA1156I is suitable for industrial vision systems requiring parallel pixel processing and real-time filtering. Its 1,143,450 logic cells can support multiple parallel pipelines, while 34,600 Kbit of block RAM can buffer image lines, reference frames, or feature maps. The 516 user I/O are useful for connecting cameras, sensors, memory interfaces, and trigger logic. Because image throughput can make thermal and power behavior design-dependent, engineers should evaluate utilization-dependent power in Vivado and implement the recommended multi-rail sequencing and decoupling. The -2 speed grade should be selected only after confirming that timing margins meet the camera and processing pipeline requirements.
추천
High-Speed Data Acquisition
The XCKU15P-2FFVA1156I supports high-speed data-acquisition architectures that combine parallel converters, memories, and real-time analysis. Its large programmable logic capacity can implement digital filtering, decimation, trigger logic, and packetization, while 34,600 Kbit of block RAM provides local buffering for high-throughput channels. The 516 I/O support broad connectivity when the selected bank standards match the acquisition interface. Engineers should use AMD package-pinout files to assign high-speed inputs, configure clocking, and separate sensitive analog-adjacent regions. Post-layout timing, power estimation, and signal-integrity analysis are necessary before treating the acquisition path as production-ready.
추천
Test and Measurement Instrumentation
The XCKU15P-2FFVA1156I fits modular test and measurement instruments requiring parallel acquisition, real-time analysis, and extensive control I/O. Its 1,143,450 logic cells can support channel processing, timing analysis, waveform generation, and protocol-specific test logic, while the 34,600 Kbit of block RAM can hold captured samples or reference tables. The FCBGA-1156 package offers 516 user I/O for dense instrumentation but demands careful escape routing and multilayer power distribution. Designers should separate sensitive measurement paths from switching supplies and digital return currents, then validate implementation timing and operating temperature against the instrument enclosure's worst-case environment.
추천
Aerospace and Defense Processing
The XCKU15P-2FFVA1156I can support parallel processing in aerospace, defense, and mission-critical electronic systems where programmable logic, memory, and high-speed interfaces are required. Its 1,143,450 logic cells allow configurable signal processing, control, and data-reduction architectures, while the 516 I/O enable integration with converters, memory, and communication equipment. Actual qualification requires the applicable AMD device grade, environmental documentation, reliability analysis, and customer-specific controls; the ordering suffix alone is not a substitute for a system qualification plan. Designers should also assess radiation effects, configuration integrity, and temperature coverage through the appropriate AMD documentation and mission assurance process.
추천
Data Center Acceleration
The XCKU15P-2FFVA1156I is suitable for data-center and accelerator workloads that benefit from parallel FPGA processing. The 1,143,450 logic cells and 522,720 programmable blocks provide substantial compute flexibility for packet processing, compression, analytics, and custom datapaths, while 34,600 Kbit of block RAM can accelerate local buffering and streaming operations. The high-pin-count FCBGA-1156 package enables wide memory and network connectivity on a complex multilayer board. Deployment should be evaluated against the selected transceiver resources, power budget, and thermal design. Use Vivado resource and power reports to ensure that a practical utilization target and sustained operating condition are achieved rather than relying on raw logic-cell counts alone.
추천
추천 제품 요약
엔지니어링 참조 데이터: XCKU15P-2FFVA1156I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XCKU15P-1FFVA1156I | XCKU15P-3FFVA1156I | XCKU15P-2FFVA1156E | XCKU15P-2FFVA1156C | XCKU15P-3FFVA1156E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FCBGA-1156 | FCBGA-1156 | FCBGA-1156 | FCBGA-1156 | FCBGA-1156 | FCBGA-1156 |
| Device Family | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ |
| Speed Grade | -2 | -1 | -3 | -2 | -2 | -3 |
| Temperature-Grade Suffix | I | I | I | E | C | E |
| Logic Cells | 1,143,450 cells | 1,143,450 cells | 1,143,450 cells | 1,143,450 cells | 1,143,450 cells | 1,143,450 cells |
| Programmable Blocks | 522,720 blocks | 522,720 blocks | 522,720 blocks | 522,720 blocks | 522,720 blocks | 522,720 blocks |
| Block RAM | 34,600 Kbit | 34,600 Kbit | 34,600 Kbit | 34,600 Kbit | 34,600 Kbit | 34,600 Kbit |
| Core Supply Voltage | 0.85 V | 0.85 V | 0.85 V | 0.85 V | 0.85 V | 0.85 V |
| User I/O | 516 I/O | 516 I/O | 516 I/O | 516 I/O | 516 I/O | 516 I/O |
| Process Technology | 16 nm FinFET | 16 nm FinFET | 16 nm FinFET | 16 nm FinFET | 16 nm FinFET | 16 nm FinFET |
주요 차별점
- Balanced -2 timing tier within the Kintex UltraScale+ family (vs XCKU15P-1FFVA1156I)
- Preserves the -2 speed position with a different temperature-grade suffix (vs XCKU15P-2FFVA1156E)
- Supports the full high-density XCKU15P implementation (vs XCKU11P-2FFVA1156I)
설계 노트
Plan the XCKU15P-2FFVA1156I as a multi-rail system rather than treating the 0.85 V core value as the complete power requirement. Use the AMD device guidance to identify VCCINT, VCCAUX, VCCBRAM, VCCO, and other assigned balls in the FFVA1156 package. Sequence the rails in the documented order, verify regulator startup and shutdown behavior, and place the prescribed high-frequency and bulk decoupling directly at the relevant supply and ground balls.
Do not build the FCBGA-1156 footprint from a generic BGA library. Download the AMD UltraScale package-device pinout files, select the exact FFVA1156 data, and use the package file to cross-check every ball, reserved location, power region, and exposed thermal land. Confirm stack-up, escape-routing layers, via-in-pad construction, solder mask, and thermal-via requirements against AMD and assembly-facility guidance before fabrication.
Estimated: the power dissipation of the XCKU15P-2FFVA1156I depends on speed grade, utilization, voltage, temperature, and enabled I/O, so no single wattage can be assigned without a specific design. Run Vivado power estimation with realistic clocking and resource utilization, then compare the result with the package thermal data and board heat-removal capability. Validate the final assembly using a system-level thermal calculation rather than relying on logic-cell count alone.
Treat high-speed I/O and memory interfaces as constrained paths rather than ordinary digital nets. Use the package pinout and UG575 guidance for differential-pair polarity, bank VCCO assignments, clock-capable inputs, and reference-clock routing. Keep return paths continuous through the stack-up, control crosstalk around high-speed nets, and run post-route timing and signal-integrity sign-off with the actual board constraints before release.
규정 준수 정보
Current environmental declarations and qualification details must be confirmed for the exact AMD order code. AEC-Q100 is not an appropriate classification for this general-purpose industrial FPGA.