Infineon

XMC4500F144K768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

料号: XMC4500F144K768ACXQMA1 ✓ 量产中
PG-LQFP-144-13 Package 120 MHz Speed 768 KB (768K x 8) Memory
最小起订量: 1 |

XMC4500F144K768ACXQMA1 概述

Infineon Technologies XMC4500F144K768ACXQMA1 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating at up to 120 MHz with 768 KB of flash memory and a 144-pin LQFP package. It is designed for industrial applications requiring deterministic control, mixed-signal acquisition, networking connectivity, and a broad peripheral set in a single device.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication peripherals, timers, analog interfaces, and control logic onto one package. The XMC4500 architecture belongs to the hierarchy of embedded processors: ARM Cortex-M4 core, 32-bit microcontroller, XMC4000 family, and industrial embedded control. Its combination of performance and peripheral integration helps reduce the component count in motor-control, communications, and industrial automation systems.

Key features include a 120 MHz Cortex-M4 processor, 768 KB of flash storage, 160 KB of RAM, 32-bit processing, and communication functions identified in the product information, including CAN, LIN, and Ethernet. The mixed-signal acquisition capability supports applications where analog measurement and digital control must operate in the same embedded platform. The industrial-grade ordering designation is associated with the XMC4500-F144K768-AC family.

The device uses an industry-standard ARM Cortex-M4 processor core and a configurable peripheral set intended for energy-efficient industrial applications. At 120 MHz, it provides substantially greater computation headroom than slower general-purpose microcontrollers, while the integrated communications and analog resources reduce the need for separate interface devices. Designers should still verify peripheral availability, pin multiplexing, electrical limits, and package details against the Infineon XMC4500 datasheet before finalizing a PCB.

Typical applications include industrial motor control, CAN and LIN network nodes, Ethernet-connected automation equipment, factory sensor hubs, power conversion controllers, and embedded industrial gateways. The XMC4500 is particularly appropriate when local control, communications, and analog acquisition are required in a single controller rather than across multiple discrete devices.

The primary design consideration is package and pin planning. The 144-pin LQFP footprint requires a land pattern matching the PG-LQFP-144-13 package, careful escape routing, and adequate decoupling near the supply pins. Engineers should also review clock configuration, communication peripheral multiplexing, and the recommended operating ranges in the manufacturer datasheet before production release.

This page combines the manufacturer datasheet, distributor product listings, package information, and engineering-oriented application guidance to make the XMC4500F144K768ACXQMA1 easier to evaluate for industrial embedded designs. The exact ordering information, electrical characteristics, lifecycle status, and peripheral configuration should be confirmed against the current Infineon documentation before procurement.

直接替换替代料: XMC4500F144K768ACXQMA1 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

XMC4500-F144K768-AC

✅ 直接替换
📦 PG-LQFP-144-13
Base family ordering designation for the same 120 MHz Cortex-M4 and 768 KB flash configuration; verify flash organization, temperature grade, and ordering suffix before substitution

📋 参考替代料(不在目录中)

XMC4500-F144F768-AC

✅ 直接替换
📦 PG-LQFP-144-13
Shares 120 MHz Cortex-M4, 768 KB flash, Ethernet, and 144-pin family configuration; F-versus-K ordering characteristics must be confirmed

📋 参考替代料(不在目录中)

XMC4500F144K768ACXQMA1 最大额定值与电气特性

Product Type 32-bit ARM Cortex-M4 microcontroller
Series XMC4000
Processor Core ARM Cortex-M4
Maximum CPU Frequency 120 MHz
Flash Memory 768 KB (768K x 8)
RAM 160 KB
Architecture 32-bit
封装 PG-LQFP-144-13
引脚数量 144 pins
Mixed-Signal Acquisition Supported
CAN Interface Supported
LIN Interface Supported
Ethernet Connectivity Supported
Product Family XMC4500
Ordering Designation XMC4500-F144K768-AC
Duty/Grade Designation Industrial
安装类型 Surface mount

XMC4500F144K768ACXQMA1 pg-lqfp-144-13 引脚配置指南

XMC4500F144K768ACXQMA1(pg-lqfp-144-13 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

XMC4500F144K768ACXQMA1 的 pg-lqfp-144-13 封装引脚图

暂无详细引脚数据: XMC4500F144K768ACXQMA1.

请参阅 数据手册 以查看完整引脚配置。

典型应用

XMC4500F144K768ACXQMA1 适用于 6 应用s: Industrial Motor Control, CAN Networked Automation Node, Ethernet-Connected Industrial Gateway, Factory Sensor and Actuator Hub, Power Conversion Controller, Industrial Communication Controller.

🏭

Industrial Motor Control

The XMC4500F144K768ACXQMA1 fits industrial motor-control platforms because its 120 MHz ARM Cortex-M4 core supports deterministic control-loop processing while the 768 KB flash and 160 KB RAM accommodate control algorithms, diagnostics, and communication stacks. Mixed-signal acquisition allows current, voltage, and position-related signals to be handled close to the control logic. CAN and LIN connectivity can connect the controller to modules and service diagnostics. Before schematic capture, confirm the required PWM channels, ADC inputs, timers, encoder interfaces, and pin multiplexing in the Infineon datasheet, and validate the thermal design against the selected operating range.

🌐

CAN Networked Automation Node

The XMC4500F144K768ACXQMA1 is suitable for an industrial CAN node that must combine protocol handling with local acquisition and control. Its 120 MHz Cortex-M4 processor provides processing headroom for CAN frames, application logic, diagnostics, and nonblocking communications tasks. The 160 KB RAM supports communication buffers and working state, while 768 KB flash accommodates firmware, calibration data, and update logic. The integrated CAN and LIN functions reduce external interface requirements. Use the datasheet to select the correct peripheral instance and pins, and configure termination, protection, grounding, and bus levels for the target network.

🖥️

Ethernet-Connected Industrial Gateway

The XMC4500F144K768ACXQMA1 can serve as the control processor in an Ethernet-connected industrial gateway when local real-time functions must coexist with higher-level communications. The 120 MHz Cortex-M4 core processes protocol stacks and gateway logic, and the 768 KB flash provides room for firmware components. CAN and LIN interfaces allow the gateway to bridge multiple field buses, while mixed-signal acquisition can monitor local process signals. The exact Ethernet PHY, isolation, magnetics, and connector implementation remain external to the MCU. Confirm supported MAC and Ethernet pin options, reference-clock requirements, and packet-buffer configuration in the manufacturer documentation.

🧩

Factory Sensor and Actuator Hub

The XMC4500F144K768ACXQMA1 fits a factory sensor hub that must aggregate mixed-signal measurements and distribute control commands across a network. Its 160 KB RAM can hold acquisition buffers, calibration tables, and communication state, while the 768 KB flash supports sensor drivers, filtering, diagnostics, and field-bus protocols. The 120 MHz processing rate supports responsive sampling and filtering, and CAN or LIN connectivity can simplify wiring to distributed actuators. Engineers should verify the ADC resolution, sampling characteristics, channel multiplexing, and conversion timing in the datasheet, and isolate sensitive analog inputs appropriately from switching and high-current stages.

⚡

Power Conversion Controller

The XMC4500F144K768ACXQMA1 is applicable to sophisticated industrial power-conversion control where fast computation, mixed-signal feedback, and network management are required. Its 120 MHz Cortex-M4 performance supports loop calculations, protection logic, supervisory tasks, and communications, while the mixed-signal acquisition resources can monitor converter voltages and currents. CAN or LIN communication can expose operating data and accept configuration commands. The MCU is a controller rather than a dedicated power converter, so external power stages, gate drivers, sensing networks, and protection hardware determine the final design. Verify timer accuracy, comparator and ADC resources, startup behavior, and control-loop timing against the datasheet.

📡

Industrial Communication Controller

The XMC4500F144K768ACXQMA1 supports industrial communication-controller designs built around CAN, LIN, and Ethernet connectivity. The 32-bit Cortex-M4 core at 120 MHz handles protocol processing, routing, diagnostics, and application functions, while 768 KB flash and 160 KB RAM provide resources for a multitask firmware architecture. Multiple communication standards allow one controller to coordinate otherwise separate network segments. Engineers must assign alternate-function pins without conflicts, ensure adequate timing margin at the selected communication rates, and separate communications transceivers from the MCU supply and ground domains as appropriate. The datasheet and reference manual should govern final peripheral, interrupt, and pin assignments.

推荐产品汇总

XMC4500-F144K768-AC Base XMC4500 family ordering designation 用于: Industrial Motor Control, Ethernet-Connected Industrial Gateway, Power Conversion Controller, Industrial Communication Controller XMC4500-F144F768-AC Related XMC4500 industrial controller 用于: CAN Networked Automation Node, Factory Sensor and Actuator Hub
What is the XMC4500F144K768ACXQMA1?
The XMC4500F144K768ACXQMA1 is an Infineon Technologies 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating up to 120 MHz with 768 KB of flash memory and 160 KB of RAM. The device is packaged in PG-LQFP-144-13 and is aimed at industrial applications that combine real-time control, mixed-signal acquisition, and communications. The family ordering designation is XMC4500-F144K768-AC, as identified in the Infineon product information.
What are the key specifications of XMC4500F144K768ACXQMA1?
The key specifications are a 120 MHz ARM Cortex-M4 processor, 32-bit processing, 768 KB of flash, 160 KB of RAM, and a 144-pin PG-LQFP-144-13 package. The XMC4500 family also provides mixed-signal acquisition plus CAN, LIN, and Ethernet connectivity. According to the Infineon XMC4500 datasheet and product-page information, these resources target configurable, energy-efficient industrial embedded systems. Verify individual peripheral availability and electrical limits against the ordering code before schematic design.
What is the operating frequency of XMC4500F144K768ACXQMA1?
The XMC4500F144K768ACXQMA1 operates up to 120 MHz. This operating frequency is stated in the Infineon XMC4500 product information and distributor descriptions for the exact ordering code. The high clock rate is useful for deterministic control loops, communication protocol handling, and concurrent peripheral servicing, but the final system timing should be checked against clock-tree configuration, peripheral limits, and the electrical operating conditions in the manufacturer datasheet.
Where can I download the XMC4500F144K768ACXQMA1 datasheet PDF?
The official XMC4500F144K768ACXQMA1 datasheet PDF is available from Infineon Technologies at https://www.infineon.com/assets/row/public/documents/30/49/infineon-xmc4500-datasheet-en.pdf. The document describes the XMC4500 family and its derivative devices. Use the ordering-information and electrical-characteristics sections to confirm the exact XMC4500-F144K768-AC configuration, and consult any associated errata sheets for documented deviations.
Where can I find the XMC4500F144K768ACXQMA1 pinout?
The XMC4500F144K768ACXQMA1 pinout is documented in the Infineon XMC4500 datasheet and its package pin-description tables. This exact ordering code uses the PG-LQFP-144-13 package, so the PCB footprint must match the 144-pin LQFP geometry and pad dimensions shown for that package. Use the datasheet pin table to assign alternate-function multiplexing, supply pins, ground pins, analog inputs, and communication signals rather than relying on a generic 144-pin diagram.
What is the difference between XMC4500F144K768ACXQMA1 and XMC4500-F144K768-AC?
XMC4500F144K768ACXQMA1 is the full ordering code for the Infineon XMC4500-F144K768-AC device, including its package and quality or temperature-related ordering suffix. The family product page identifies XMC4500-F144K768-AC as an industrial ARM Cortex-M4 microcontroller with 120 MHz CPU frequency, 768 KB flash, and Ethernet. The full ordering code should be matched against the manufacturer ordering table when confirming temperature range, package, and production status.
Is XMC4500F144K768ACXQMA1 suitable for industrial motor control?
Yes, the XMC4500F144K768ACXQMA1 is suitable for industrial motor-control designs that require a 120 MHz 32-bit controller, mixed-signal acquisition, and extensive serial connectivity. Its 768 KB of flash and 160 KB of RAM support control software, parameter storage, diagnostics, and communications tasks. The final design must confirm the required PWM, ADC, timer, and position-sensor resources in the datasheet, along with thermal and operating-range requirements.
What communications interfaces does XMC4500F144K768ACXQMA1 support?
The XMC4500F144K768ACXQMA1 supports CAN, LIN, and Ethernet connectivity according to the XMC4500 family product information. These interfaces make the controller suitable for industrial network nodes, connected automation equipment, and sensor or actuator hubs. Interface availability at the package pins depends on the selected peripheral instance, pad multiplexing, and configuration. Consult the Infineon pin-description and reference-manual material before assigning signals.
XMC4500F144K768ACXQMA1 vs XMC4500-F144F768-AC: which should I choose?
Choose XMC4500F144K768ACXQMA1 when the exact K768 configuration and full ordering suffix match your controlled BOM. The cross-reference data also lists XMC4500-F144F768-AC with the same 120 MHz Cortex-M4 core, 768 KB flash, Ethernet, and 144-pin family context. The F designation may indicate a different flash-related ordering characteristic, so the Infineon ordering table must be checked for the exact difference before treating either part as a drop-in replacement.
When should I choose XMC4500F144K768ACXQMA1 over another XMC4000 controller?
Choose XMC4500F144K768ACXQMA1 when the design specifically needs the XMC4500's 120 MHz performance, 768 KB flash, 160 KB RAM, mixed-signal acquisition, and integrated CAN, LIN, and Ethernet connectivity in a 144-pin LQFP. Smaller XMC4000 controllers may be preferable when peripheral mix, pin count, memory, or communication requirements are lower. Compare the exact package and peripheral assignment, not only the Cortex-M4 family relationship.
Is XMC4500F144K768ACXQMA1 the same as XMC4500-F144F768-AC?
No, they should not be treated as identical without reviewing the ordering table. XMC4500F144K768ACXQMA1 is the complete suffix-coded part, while XMC4500-F144F768-AC is a related family ordering designation with the same 120 MHz core, 768 KB flash, and Ethernet description. Their F and K ordering characteristics may differ. Confirm the exact flash configuration, temperature grade, package, and lifecycle status before considering substitution.
What can replace XMC4500F144K768ACXQMA1?
The closest documented same-family candidate is XMC4500-F144K768-AC, which represents the base XMC4500-F144K768-AC configuration associated with the target ordering code. The related XMC4500-F144F768-AC also shares the 120 MHz core, 768 KB flash, and Ethernet positioning, but its ordering characteristics differ. Because the cross-reference results do not establish five pin-to-pin alternatives with verified electrical equivalence, request manufacturer guidance and validate the complete ordering table before replacing the target.
What is the best drop-in replacement for XMC4500F144K768ACXQMA1?
The best potential drop-in match is XMC4500-F144K768-AC because it denotes the target family's 144-pin, 768 KB flash configuration. It is not enough by itself to establish drop-in status: flash organization, temperature range, peripheral configuration, and exact package suffix must match. No five verified drop-in equivalents were identified, so do not substitute from a generic cross-reference result. Validate the manufacturer ordering code, pin table, timing, and lifecycle notice first.
Where to buy XMC4500F144K768ACXQMA1 online?
Use the Request a Quote form on this page to request current availability, commercial terms, and lead time for XMC4500F144K768ACXQMA1. The part is listed by Infineon Technologies and appears in distributor catalogs, but stock and lead time can vary by quantity, date, and regional inventory. Submit the exact full MPN and required quantity so the returned quotation corresponds to the PG-LQFP-144-13 ordering configuration.
What is the price of XMC4500F144K768ACXQMA1?
Current commercial pricing for XMC4500F144K768ACXQMA1 should be requested through the Request a Quote form on this page. The available search results confirm that the exact MPN is offered by distributors, but they do not provide a qualifying, quantity-break price table that can be copied accurately. Use the full ordering code and requested quantity in the quotation request to obtain the applicable commercial response.
What is the lead time for XMC4500F144K768ACXQMA1?
The current lead time for XMC4500F144K768ACXQMA1 should be obtained through the Request a Quote form on this page by stating the required quantity and delivery target. The distributor search result indicates that the exact part is catalogued for ordering, but it does not state a fixed production or delivery interval. The quotation response should also confirm whether the requested quantity is in stock, scheduled, or subject to allocation.

工程参考数据: XMC4500F144K768ACXQMA1 ——对比、设计指导和合规信息。

选型指南

Select XMC4500F144K768ACXQMA1 when the design requires the exact XMC4500-F144K768-AC configuration, a 120 MHz ARM Cortex-M4 core, 768 KB flash, 160 KB RAM, mixed-signal acquisition, and integrated CAN, LIN, and Ethernet connectivity in a 144-pin LQFP. It is well suited to industrial motor control, automation nodes, communication controllers, and gateway designs. XMC4500-F144K768-AC is the closest base-family ordering designation and should be selected only when the full ordering table confirms identical flash, grade, package, and lifecycle requirements. XMC4500-F144F768-AC is a related alternative with the same core, flash capacity, Ethernet positioning, and package family, but its F ordering characteristic requires explicit validation. No five verified drop-in alternatives were established; firmware, pin multiplexing, timing, qualification, and production-status checks remain necessary before any substitution.

与替代料对比

参数 本产品 XMC4500-F144K768-AC XMC4500-F144F768-AC
Package PG-LQFP-144-13 PG-LQFP-144-13 PG-LQFP-144-13
Brand Infineon Technologies Infineon Technologies Infineon Technologies
Processor Core ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4
Maximum CPU Frequency 120 MHz 120 MHz 120 MHz
Flash Memory 768 KB 768 KB 768 KB
Ethernet Connectivity Supported Supported Supported
Ordering Characteristic K768 with XQMA1 suffix K768 base designation F768 designation

关键差异点

  • Exact full ordering-code identity (对比 XMC4500-F144K768-AC)
  • 120 MHz Cortex-M4 performance (对比 XMC4500-F144F768-AC)
  • Integrated industrial connectivity (对比 XMC4500-F144K768-AC)

设计说明

Use the PG-LQFP-144-13 land pattern and verify pad dimensions against the Infineon package drawing before releasing artwork. Place input and output decoupling capacitors close to their assigned supply and ground pins, provide a low-impedance return path beneath the device where the layout rules permit, and route high-current or fast-switching nets away from analog inputs. Confirm every pin's reset, clock, debug, and alternate-function role using the datasheet pin table rather than assigning functions by position alone.

Separate analog acquisition circuitry from Ethernet, CAN, LIN, and switching-supply regions. Maintain short, guarded analog traces, use a clear return reference, and place analog filtering components close to the controller pins. For communications interfaces, follow the recommended external transceiver, termination, protection, and grounding topology in the relevant interface guidance. The mixed-signal performance of the design depends as much on trace geometry and return-current control as on the nominal ADC resources.

Do not substitute the base XMC4500-F144K768-AC designation or the related F768 ordering code solely from the visible core, flash, and package descriptions. Before replacement, compare flash organization, temperature grade, package, peripheral set, pin multiplexing, and lifecycle status in the Infineon ordering information. Also verify startup, clock, watchdog, and pin-reset requirements; a device can share the same package while using meaningfully different ordering characteristics.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The available product information identifies an industrial XMC4500 microcontroller but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to the stated industrial rather than automotive ordering designation.

数据核验日期: 2026-11-11 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

XMC4500F144K768ACXQMA1 XMC4500F144K768ACXQMA1 datasheet XMC4500F144K768ACXQMA1 pinout XMC4500F144K768ACXQMA1 datasheet pdf XMC4500F144K768ACXQMA1 equivalent XMC4500F144K768ACXQMA1 replacement XMC4500F144K768ACXQMA1 price XMC4500F144K768ACXQMA1 stock Infineon XMC4500F144K768ACXQMA1 XMC4500F144K768ACXQMA1 footprint XMC4500F144K768ACXQMA1 schematic XMC4500F144K768ACXQMA1 vs XMC4500-F144F768-AC XMC4500F144K768ACXQMA1 120MHz Cortex-M4 XMC4500F144K768ACXQMA1 LQFP-144

相关元器件 & 术语

Infineon Technologies XMC4500F144K768ACXQMA1 XMC4500-F144K768-AC XMC4500-F144F768-AC ARM Cortex-M4 XMC4000 XMC4500 32-bit microcontroller embedded microcontroller industrial control mixed-signal acquisition CAN LIN Ethernet 768 KB flash memory 160 KB RAM 120 MHz PG-LQFP-144-13 LQFP package surface-mount package industrial microcontroller energy-efficient embedded control real-time control factory automation
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情