المنتجات (46,000+)

MB9EF226PMC-GSE2 - 128MHz ARM Cortex-R4 MCU 2MB Flash | Infineon
MB9EF226PMC-GSE2

MB9EF226PMC-GSE2 - 128MHz ARM Cortex-R4 MCU 2MB Flash | Infineon

The Infineon MB9EF226PMC-GSE2 is an ARM Cortex-R4 32-bit microcontroller from the FCR4 MB9EF226 family, operating at 128 MHz and integrating 2 MB of flash memory in a 176-pin LQFP (24x24 mm) package. According to the manufacturer datasheet, this MCU targets real-time control and chassis/safety automotive applications, with industrial-grade temperature support. The part carries an Automotive MCU designation per the Mouser catalog entry and is supplied on tape-and-reel. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The MB9EF226PMC-GSE2 belongs to the Cortex-R4 family, which is optimized for deterministic real-time response rather than the application-processing focus of Cortex-A cores. Within the broader taxonomy, this device sits under MCU -> microcontroller -> embedded processor -> semiconductor IC, and within Infineon's automotive-safety portfolio it occupies the chassis/safety MCU segment. Key features include a 32-bit ARM Cortex-R4 core running up to 128 MHz, 2 MB of on-chip flash, industrial temperature grade, and a 176-pin LQFP package per the Partstack LFQFP/SQUARE/GULL WING terminal form. The device supports automotive real-time control use cases such as electric power steering, brake systems, and chassis domain controllers. The automotive MCU classification indicates qualification for vehicle electrical-environment conditions. The Cortex-R4 core delivers deterministic interrupt latency and tightly coupled memory, which is essential when the application must respond to a sensor input within microseconds. Combined with 2 MB of flash, the device can host a full real-time operating system plus application code without external memory expansion. The 176-pin LQFP provides abundant GPIO and peripheral pinout for motor-control PWM, CAN-FD, and analog front-end integration. Typical applications include automotive electric power steering, electronic stability control, brake-by-wire systems, chassis domain ECUs, and industrial real-time controllers that benefit from the deterministic Cortex-R4 profile. The wide pin count supports parallel sensor interfaces and multi-axis motor control. When designing with this MCU, allocate PCB thermal copper under the LQFP thermal pad and verify that the chosen debug probe (e.g. J-Link or Infineon DAP) matches the SWD/JTAG pinout. Always check the firmware version against the latest errata document before locking the design. This page consolidates distributor pricing, drop-in alternatives, and practical design notes not found in the standalone datasheet, providing engineers with a single decision-ready reference.

طلب عرض سعر اتصل بنا
MC-10105F1-821-FNA-M1-A - TPS-1 PROFINET IO SoC 100MHz | Renesas
MC-10105F1-821-FNA-M1-A

MC-10105F1-821-FNA-M1-A - TPS-1 PROFINET IO SoC 100MHz | Renesas

The Renesas Electronics MC-10105F1-821-FNA-M1-A is a TPS-1 family application-specific microcontroller / single-chip interface solution for PROFINET IO devices, integrating an ARM core with a dual-port Ethernet switch and supporting 100 Mbps full-duplex PROFINET communication. The device is housed in a 196-pin FPBGA package measuring 15 x 15 mm with 1.0 mm pitch, and is qualified for industrial operating conditions. A PROFINET IO device chip is an application-specific integrated circuit that bundles the industrial-Ethernet protocol stack, real-time (RT/IRT) media access, and a managed dual-port switch into a single silicon die so that field devices such as remote I/O blocks, variable-frequency drives, encoders, and identification readers can be designed without an external companion controller. Within the broader embedded-system hierarchy, this part sits at the junction of an industrial microcontroller (MCU), an Ethernet MAC/PHY block, and a deterministic-protocol accelerator, allowing OEMs to certify PROFINET conformance class C without writing low-level stack code from scratch. Key differentiating features include 196-BGA integration (no companion Ethernet controller needed), compliance with PROFINET specification V2.3 for real-time and isochronous real-time (IRT) classes, a 100 MHz ARM core, and Phoenix-Contact co-development with Renesas for guaranteed protocol interoperability. The dual-port integrated switch removes the need for an external PHY/MAC pair on simple star or line topologies common in field-cabinet wiring. Architecturally, the part pairs a 32-bit ARM Cortex-M-class CPU (100 MHz) with on-chip RAM, deterministic Ethernet media-access hardware, and a PROFINET IO device firmware load supplied by Renesas. This division of labor lets the host application processor focus on device-specific I/O while the TPS-1 handles cut-through switching, RT/IRT scheduling, and PROFINET alarm generation with deterministic cycle jitter below 1 µs per the device specification. Typical applications include PROFINET-IO remote I/O blocks, frequency-inverter / variable-frequency drive fieldbus interfaces, encoder and absolute-position sensor gateways, RFID-reader PROFINET nodes, and modular I/O stations in factory automation. The 100 Mbps full-duplex bandwidth comfortably exceeds typical PROFINET RT cycle times of 1 ms. When designing in the MC-10105F1-821-FNA-M1-A, plan for a 1.0 mm pitch BGA land pattern with controlled-impedance differential pairs for the MII/RGMII Ethernet traces and a 25 MHz reference crystal. Thermal management is straightforward at industrial ambient temperatures because the part is fabricated in a low-power CMOS process optimized for fan-less DIN-rail mounting. This page synthesizes distributor pricing, protocol-compliance scope, and application notes not consolidated on the manufacturer product page, helping industrial-automation design engineers evaluate the MC-10105F1-821-FNA-M1-A for PROFINET IO device integration as of 2026-10-09.

طلب عرض سعر اتصل بنا
MC10EL32DTG - 5V ECL ÷2 Divider, 8-TSSOP | onsemi
MC10EL32DTG

MC10EL32DTG - 5V ECL ÷2 Divider, 8-TSSOP | onsemi

The onsemi MC10EL32DTG is a 5V ECL (Emitter-Coupled Logic) divide-by-2 frequency divider supplied in an 8-pin TSSOP surface-mount package. The device contains one divide-by-2 element that toggles on the rising edge of the differential clock input, producing complementary ECL Q and Q-bar outputs suitable for high-speed clock tree applications. Operating from a single −4.2V to −5.7V ECL supply rail with PECL compatibility via external bias, the part delivers sub-nanosecond propagation delay characteristics typical of the 10H/100H ECL logic family. An ECL divider is a digital logic device that divides an input clock frequency by an integer factor (here, 2) using current-steering bipolar transistor stages. ECL devices occupy the top of the logic family hierarchy (faster than TTL/CMOS but higher power consumption), and the MC10EL32 specifically provides the high toggle rates required by telecommunications, instrumentation, and test equipment clock distribution where low phase noise and deterministic timing are paramount. Key features include a VBB reference voltage output that allows single-ended input operation by biasing an unused differential input as a switching reference, asynchronous reset capability for initialization, and complementary differential ECL outputs. The 8-TSSOP package provides a 0.65mm pitch and compact board footprint suitable for high-density backplane designs. Architecturally, the MC10EL32 uses differential current steering with internal emitter-follower output buffering, producing typical propagation delays under 1 ns while maintaining low output skew between Q and Q-bar. The internal VBB reference simplifies PCB design by eliminating the need for external bias networks when single-ended clocks must be AC-coupled. Typical applications include clock synthesis in SONET/SDH telecommunications equipment, frequency counter prescalers, high-speed test and measurement instrumentation, and radar/digital IF signal processing. The PECL-compatible threshold also enables use in 3.3V LVPECL systems via level shifting. When designing with this part, maintain 50-ohm impedance-controlled transmission lines on all ECL signal traces to preserve edge fidelity, and provide robust bypassing (0.1 µF and 0.01 µF capacitors) close to the VEE pin. Use the VBB pin only as a reference bias - it cannot source significant load current. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that supplement the manufacturer datasheet and help engineers select, source, and implement the MC10EL32DTG in high-speed clock distribution designs.

طلب عرض سعر اتصل بنا
MC11E1CPBE2 - 8-Bit ROMless 2 MHz MCU | NXP | 52-LQFP
MC11E1CPBE2

MC11E1CPBE2 - 8-Bit ROMless 2 MHz MCU | NXP | 52-LQFP

The NXP Semiconductors MC11E1CPBE2 is an 8-bit ROMless HC11 microcontroller operating at up to 2 MHz, with 512 bytes of RAM, 38 I/O pins, and a 52-LQFP package measuring 10 x 10 mm. It is designed for embedded control systems requiring a compact processor, digital I/O, and automotive-oriented industrial-temperature capability. A microcontroller is a semiconductor device that integrates a CPU core, memory, input/output ports, timers, and communication interfaces on one integrated circuit. In the broader hierarchy, this MC11E1CPBE2 is an 8-bit microcontroller, part of the HC11 family, and belongs to the embedded-microcontroller and semiconductor categories. Its ROMless architecture allows the application firmware to be supplied by external memory or a programming system, supporting applications where program-memory requirements vary or field programming is required. Verified distributor data identifies the MC11E1CPBE2 as an HC11 microcontroller with a 2 MHz speed grade, ROMless configuration, 512 x 8 RAM, 38 I/O, internal oscillator, and a 52-LQFP package. The 52-terminal gull-wing package is surface-mountable and uses a 10 x 10 mm outline. Because it is ROMless, designers must verify the external memory interface and programming architecture against the original system requirements before replacing or upgrading an existing design. Typical applications include automotive electronic control units, motor and actuator controllers, sensor interfaces, industrial automation equipment, and legacy embedded systems that depend on the M68HC11 CPU architecture. The 38-I/O count provides useful connectivity for digital sensors, switches, relays, communication transceivers, and control signals. The 2 MHz CPU speed is suitable for control-loop and supervisory tasks rather than high-bandwidth signal processing or modern high-performance applications. The primary design consideration is legacy software compatibility. Firmware timing, interrupt priorities, memory-mapped peripherals, external bus behavior, and package-level routing must be preserved during any replacement. Engineers should obtain the manufacturer datasheet and verify the exact pinout, electrical limits, oscillator connections, reset requirements, and programming procedure before committing to a new PCB design. This product data summarizes verified distributor specifications, package information, sourcing references, and design considerations. It does not invent electrical limits, memory-map details, or a cross-brand substitute when the supplied web results do not establish one.

طلب عرض سعر اتصل بنا
MC14016BD - 4-Channel 400Ω Analog Switch | onsemi | Signal Control
MC14016BD

MC14016BD - 4-Channel 400Ω Analog Switch | onsemi | Signal Control

onsemi MC14016BD is a four-circuit CMOS analog switch and quad multiplexer with an on-state resistance of 400 Ω, 1:1 signal routing, and a 14-pin SOIC package. The device operates from 3 V to 18 V and contains four independent bilateral switches that can control either digital or analog signals. Each switch supports signal gating, multiplexing, chopping, modulation, demodulation, and CMOS logic implementations. A CMOS analog switch is a voltage-controlled semiconductor device that connects or isolates signal paths with low on-state resistance and high off-state impedance. The MC14016B family belongs to the analog switch and multiplexer hierarchy within interface ICs. Four physically independent switches permit one control signal to route each of four signal channels, while the bidirectional construction allows signal flow in either direction when the corresponding switch is enabled. The monolithic MC14016BD combines P-channel and N-channel MOS enhancement-mode devices. Its principal advantages include a 1:1 multiplexing configuration, four independent switch sections, operation across a 3 V to 18 V supply range, and a compact 14-pin SOIC package. Because the switches can handle analog as well as digital signals, the device is useful when a system must route sampled, sensed, or conditioned signals without permanently connecting every channel to the same bus. Signal integrity depends on control timing, output loading, switch charge injection, and the impedance of the connected source. The 400 Ω on resistance is appropriate for moderate-impedance switching rather than low-loss RF distribution. Control inputs should be driven only when signal levels remain within the device's valid input and output ranges, and unused control and signal pins should be connected according to the manufacturer's recommended application information. Typical uses include analog signal gating, frequency choppers, modulators and demodulators, multiplexed measurement paths, and CMOS logic interfaces. The part is especially relevant to industrial control, instrumentation, sensor multiplexing, and communication circuitry where several low-frequency or moderate-frequency signals must be selected by logic control. For PCB design, place the device close to the signals it routes and keep return paths continuous to reduce coupling between adjacent channels. Decoupling capacitors should be placed at the power pins according to the manufacturer datasheet, and control traces should be routed away from sensitive analog inputs. This page combines the manufacturer specifications with application guidance, package details, sourcing information, and drop-in replacement considerations for faster engineering review.

طلب عرض سعر اتصل بنا
MC14017BD - 3-18V CMOS Decade Counter | onsemi
MC14017BD

MC14017BD - 3-18V CMOS Decade Counter | onsemi

The onsemi MC14017BD is a 5-stage Johnson decade counter with a built-in code converter, a 3 V to 18 V operating supply range, and ten decoded outputs in a 16-SOIC package. It converts clock pulses into one-of-ten sequential outputs for digital sequencing, timing, and control applications. The counter also provides a carry output for extending the counting sequence beyond ten states. A decade counter, also called a divide-by-10 counter, belongs to the broader counter and divider hierarchy within CMOS logic and digital timing ICs. Unlike a binary counter, a decade counter produces ten mutually exclusive output states. The Johnson-counter architecture used in the MC14017B is designed to provide high-speed operation and spike-free decoded outputs while retaining fully static operation. Key features include a five-stage Johnson counter, an integrated decimal code converter, ten decoded outputs, positive-going-edge clock updates, and a carry output for cascaded counting. Its 3 V to 18 V supply operation supports both 5 V and 12 V logic systems. The device is offered in a 16-SOIC surface-mount package, while the MC14017BD temperature-grade designation identifies a military-oriented version of the MC14017B family. The MC14017B operates from a single positive supply referenced to ground. Its DC clock-input circuit accommodates slow clock rise times, while the decoded outputs change on the positive-going edge of the clock. A clock-inhibit input provides a second control path for pausing the count, and the asynchronous clear input resets the counter so that output Q0 becomes active for the next clock cycle. Typical applications include decade sequencing, industrial timer and counter modules, stepper-motor position sequencing, programmable logic-controller counters, relay-bank activation sequences, test-equipment timing, and digital clock or display multiplexing. The carry output can also trigger a cascaded decade stage, allowing counters larger than ten states to be constructed with additional devices. For robust implementations, treat the clock, inhibit, and asynchronous clear signals as logic inputs with defined levels during reset. Keep the clock path short to reduce susceptibility to ringing and multiple transitions near the active clock edge. Verify output timing and supply-current behavior across the full intended temperature range before releasing the design. This page combines the manufacturer’s counter architecture, package and lifecycle information with drop-in family references, parameter comparisons, application guidance, and practical design notes for engineers evaluating the MC14017BD.

طلب عرض سعر اتصل بنا
MC14017BF - 16 MHz Decade Counter | onsemi | Logic IC
MC14017BF

MC14017BF - 16 MHz Decade Counter | onsemi | Logic IC

The onsemi MC14017BF is a five-stage Johnson decade counter with a built-in code converter, operating from a 3 V to 18 V supply in a 16-pin SOIC package. It provides a maximum operating frequency of 16 MHz, a propagation delay of 175 ns at 15 V with a 50 pF load, and ten decoded decade outputs. The counter changes state on the positive-going clock edge and supports both rising-edge and falling-edge operation as well as programmable divide ratios and cascading. A decade counter is a sequential logic device that divides an input clock into ten decoded states. The MC14017BF family combines a five-stage Johnson counter with a decoder, producing one active output for each count from zero through nine. This structure places the MC14017BF in the logic IC hierarchy as a counter and divider within digital semiconductor and clock-control applications. Its principal characteristics include a 3 V to 18 V operating range, a 16 MHz maximum frequency, and a -55 °C to +125 °C temperature range. The Johnson-counter architecture is designed for high-speed operation and spike-free decoded outputs. The SOIC-16-208 mil package supports conventional surface-mount assembly while providing access to the clock, reset, carry, supply, ground, and decoded output functions. The MC14017BF is useful when a system needs to divide a frequency into ten discrete periods, count repetitive events, sequence multiple operations, or create programmable timing intervals. Its carry output enables frequency division beyond ten, allowing several counters to be cascaded. Falling-edge clock operation also makes it suitable for systems in which the triggering signal changes on the falling transition. Typical uses include industrial decade and event counters, clock and frequency dividers, programmable timing modules, sequencing controllers, and test equipment. In a cascaded arrangement, each additional stage extends the effective count range while preserving the decoded-decade behavior of the final stage. The broad supply range supports both low-voltage and higher-voltage industrial logic systems. When laying out the circuit, keep the clock trace short and isolate it from the ten decoded outputs to reduce clock-feedthrough and switching noise. Respect the device's absolute maximum input-voltage limits, provide a stable supply and ground reference, and account for output rise and fall times when driving capacitive loads. This page combines manufacturer specifications, drop-in family alternatives, comparison data, and practical implementation guidance for counter and divider designs.

طلب عرض سعر اتصل بنا
MC14018BD - 5-Bit CMOS Johnson Counter | onsemi | SOIC-16
MC14018BD

MC14018BD - 5-Bit CMOS Johnson Counter | onsemi | SOIC-16

The onsemi MC14018BD is a five-stage CMOS Johnson counter with asynchronous preset and reset inputs, packaged in a 16-pin SOIC. It increments synchronously on the positive-going edge of the clock, and its five counter outputs support divide-by-N operation when the appropriate feedback connection is used. The device is identified in distributor records as a counter IC with one divide-by-N element, five bits, positive-edge operation, and a 16-SOIC package. A Johnson counter is a binary counter whose outputs change in a shifted sequence rather than following conventional binary counting order. Its feedback structure can implement stable divide-by-N counters when the selected output is returned to the clock or preset logic. This makes the MC14018BD useful in frequency division, sequence generation, timing, and control systems where a configurable count ratio is required. The MC14018B family provides five asynchronously presettable and resettable counter stages. Preset is controlled through a logic-high preset-enable input, while reset provides a separate asynchronous clearing function. Synchronous counting occurs on the rising clock edge, allowing counter state to advance predictably under a defined clock source. The distinction between asynchronous control inputs and synchronous counting is important when designing reset, preset, or cascading behavior. The five counter outputs expose intermediate states of the counting sequence. These outputs can be observed directly for state indication or connected according to the desired divide ratio. Because feedback logic determines the effective modulus, correct wiring and timing must be checked against the manufacturer’s counter configuration and truth-table guidance. Typical uses include digital timing dividers, programmable sequence counters, clock-frequency division, industrial timing modules, and embedded control logic. The SOIC-16 surface-mount package supports compact PCB layouts, while the positive-edge clock architecture works naturally with rising-edge clock sources and standard CMOS control signals. When laying out the circuit, keep clock and control traces short, provide a stable supply reference, and avoid routing sensitive counter outputs directly through long traces adjacent to high-switching nodes. Decoupling should follow the manufacturer’s recommended application guidance. Because preset and reset are asynchronous, their pulse widths and settling behavior should be reviewed before using them for short control pulses. This product record combines the manufacturer function description, package and counter classification, sourcing fields, and practical implementation guidance. It also identifies compatible MC14018-family alternatives while clearly separating confirmed drop-in options from related parts that require different packages or function verification.

طلب عرض سعر اتصل بنا
MC14018BF - 5-Stage Presettable Counter | onsemi
MC14018BF

MC14018BF - 5-Stage Presettable Counter | onsemi

onsemi MC14018BF is a five-stage Johnson-type, presettable divide-by-N counter with asynchronous preset and reset control, packaged in a 16-pin plastic DIP. The device increments synchronously on the positive-going edge of the clock and provides five decoded decade outputs for applications requiring frequency division, sequencing, or ring-counter operation. A Johnson counter is a synchronous sequential-logic circuit whose output stages feed the next stage in a ring configuration. It belongs to the counter and divider hierarchy within CMOS logic ICs. Unlike a conventional binary ripple counter, the MC14018B implements decade-oriented counting with individually available outputs and separate asynchronous controls for preset and reset. Presetting occurs when the preset-enable input is driven to a logic 1, while the counter can be reset asynchronously through its dedicated reset input. The principal functional characteristics include five Johnson counter stages, positive-edge clock operation, asynchronous preset and reset functions, and five decoded outputs suitable for driving five sequential stages. The asynchronous control paths allow an external system to establish a known count immediately rather than waiting for a clock edge. This is useful when synchronization with another subsystem or a system initialization sequence is required. The MC14018B is implemented as a CMOS logic device, placing it within the low-dropout and low-power digital IC family associated with battery-powered and low-voltage systems. The counter maintains state across clock transitions and can divide an input clock into lower-frequency or sequential timing signals. Its decoded outputs can also act as a five-position ring sequence for sequencing multiple loads or system phases. Typical applications include programmable frequency dividers, digital timing generators, cyclic sequence counters, industrial control logic, and clock-domain distribution. It can be used where a compact five-step sequence is needed without implementing the counter from individual flip-flops. Because preset and reset are asynchronous, the device can also initialize a timing sequence after reset while the surrounding system is settling. PCB implementation requires attention to unused inputs and signal transitions. Follow the onsemi MC14018B datasheet pin-description table for every connection, keep the clock and control traces short, and place any decoupling capacitor close to the supply pins. Because transition behavior can influence adjacent CMOS nets, avoid routing high-current or high-speed signals beside the counter outputs and use a defined reset strategy during power-up. This page combines the functional description, pin and package guidance, application analysis, design notes, and sourcing information for the MC14018BF. The comparison section distinguishes the 16-pin plastic DIP MC14018BF from other MC14018B package and temperature options, helping engineers determine when a footprint or qualification change is required before substitution.

طلب عرض سعر اتصل بنا
MC14022BD - 4-Stage Octal Counter, 16-SOIC | onsemi
MC14022BD

MC14022BD - 4-Stage Octal Counter, 16-SOIC | onsemi

The onsemi MC14022BD is a four-stage Johnson octal counter with a built-in code converter, packaged in a 16-SOIC. It accepts a positive-going clock edge, operates from a 3 V to 18 V supply, and provides eight decoded outputs whose transitions occur on the rising clock edge. The Johnson-counter architecture is intended to produce spike-free outputs while supporting high-speed operation. MC14022BD is suited to frequency division, sequencing, timing, and digital state-generation circuits where one low-frequency clock must be translated into eight ordered output intervals. An octal counter is a sequential digital-logic component that advances through a fixed sequence of states when driven by clock transitions. The MC14022B family uses a four-stage Johnson counter followed by an integrated decoder. A Johnson counter circulates a defined pattern through four internal stages, while the decoder converts that pattern into eight mutually timed output signals. Within the broader semiconductor hierarchy, the device belongs to the counters and dividers category of CMOS logic ICs. The primary features of the MC14022BD include eight decoded outputs, positive-edge triggering, and spike-free output behavior. Its 3 V to 18 V operating range allows use in both lower-voltage 5 V systems and conventional 15 V industrial logic environments. The four-stage counter provides the basis for dividing an input frequency into eight output periods, while the built-in code converter simplifies implementation compared with a separate binary counter and decoder arrangement. Internally, the part combines four Johnson-counter stages with decoding logic. Each decoded output is normally low and becomes high only during its assigned octal time period. The outputs change on the positive-going edge of the clock pulse, making edge polarity an essential consideration when cascading multiple counters or synchronizing the circuit with other positive-edge-triggered logic. The design supports cascaded frequency division and ordered pulse generation without requiring an external binary-to-octal decoder. Typical applications include divide-by-eight clock generation, programmable timing sequences, industrial control sequencing, digital waveform generation, and phase-distribution circuits. The device can also serve as a compact state decoder when a system requires eight outputs corresponding to successive input-clock intervals. In cascaded arrangements, multiple MC14022BD devices can create longer timing sequences or additional frequency divisions while retaining a consistent positive-edge operating model. Designers should account for output rise and fall times, supply decoupling, and clock-signal integrity when operating near the upper frequency capability of the device. Place the decoupling capacitor close to the supply pins and route the clock away from output lines to avoid unintended coupling. Because the outputs change on the positive-going clock edge, downstream circuitry should use compatible triggering conventions or deliberate inversion where required. This page combines the MC14022BD device description with practical design guidance, verified source links, application-focused engineering context, and a structured comparison of compatible family members. It also organizes sourcing information, compliance fields, package details, and technical search terms to help engineers evaluate the MC14022BD for counter, divider, timing, and sequencing designs.

طلب عرض سعر اتصل بنا
MC14024BD - 7-Bit Binary Ripple Counter | onsemi
MC14024BD

MC14024BD - 7-Bit Binary Ripple Counter | onsemi

The onsemi MC14024BD is a 7-bit binary ripple counter IC with one counter element, negative-edge clock triggering, and a 14-pin SOIC package. It operates across a 3 V to 18 V supply range and provides buffered outputs for each of its seven counter stages. The device is designed for frequency division, event counting, timing generation, and digital state sequencing in conventional CMOS logic systems. A binary ripple counter is a sequential digital logic device that advances through 2^n states as clock pulses arrive. The MC14024BD implements seven cascaded stages, allowing a single clock input to produce division ratios from 2 through 128 when the corresponding output stages are used. Its 3 V to 18 V supply range places it between conventional 5 V logic and higher-voltage CMOS-compatible equipment. The principal features include short propagation delays, high maximum clock rates, buffered stage outputs, and hysteresis on the clock input for improved noise immunity. The reset input uses standard noise immunity. Unlike a synchronous counter, the ripple architecture changes adjacent output stages sequentially, which can create accumulated decoding delay when several outputs are decoded simultaneously. Each counter stage is buffered, allowing the outputs to drive external logic while maintaining predictable logic levels. The manufacturer describes the MC14024BD as a pin-for-pin replacement for the CD4024B. The component is also identified as Pb-free and RoHS compliant in the manufacturer datasheet. A qualified NLV-prefixed option exists for automotive and other applications requiring unique site and control changes, but the exact NLV ordering code is not identified here. Typical uses include dividing a system clock into slower timing intervals, counting recurring events, sequencing digital operations, generating programmable delays, and maintaining a modulo count in industrial control, instrumentation, and embedded peripheral logic. The counter can also operate as a one-shot or binary state register when its clock and reset inputs are driven according to the application requirements. Designers should account for ripple propagation delay when decoding multiple outputs, allow sufficient clock rise and fall times for reliable CMOS operation, and use hysteresis benefits when the clock source is noisy. Decoupling capacitors should be placed close to the supply pins, while unused inputs must be held at a defined logic level. This page also organizes the available sourcing, comparison, and engineering guidance around the exact MC14024BD ordering code. For a new design, the MC14024BD is most appropriate when a 14-pin SOIC footprint, seven binary count stages, and a 3 V to 18 V operating range are required. Because it is a ripple counter, a synchronous counter may be preferable when simultaneous output transitions must remain tightly aligned. For legacy repairs, confirm the exact pinout and electrical limits in the manufacturer datasheet before substituting an equivalent device onto an existing board.

طلب عرض سعر اتصل بنا
MC14024BF - 7-Bit CMOS Ripple Counter IC | onsemi
MC14024BF

MC14024BF - 7-Bit CMOS Ripple Counter IC | onsemi

The onsemi MC14024BF is a 7-bit, asynchronous binary ripple counter IC with a supply voltage range of 3 V to 18 V, operating temperature range of -55°C to 125°C, and a 14-terminal PDSO14 package. It provides seven buffered counter outputs, negative-edge clock triggering, upward counting, and standard CMOS integration. A binary ripple counter is a logic IC that advances through a sequence of binary values when an external clock edge is applied. The MC14024BF belongs to the CMOS counter and divider category within the broader hierarchy of digital logic, logic ICs, and integrated circuits. Its seven stages can be used independently as modulo counters, frequency division stages, state-counting elements, or a complete seven-bit counter when the output stages are chained internally. The key operating features include seven counter stages, buffered outputs, negative-edge triggering, asynchronous counting, and hysteresis on the clock input for improved noise immunity. The reset input uses standard noise immunity. These characteristics make the device useful when a design requires a simple counter without a dedicated microprocessor or programmable logic. The 3 V to 18 V supply range permits operation across common low-voltage and conventional CMOS supply systems. The ripple architecture advances one stage per clock event, with propagation delay accumulating through the cascaded stages. Each output is buffered, allowing individual stage outputs to be observed or used in external logic. Because the maximum operating frequency and timing limits depend on operating voltage and temperature, the onsemi MC14024B datasheet should be consulted for the applicable values before relying on the counter at a system clock edge that approaches the device limit. Typical applications include digital event counting, pulse accumulation, seven-segment sequencing control, industrial timing, frequency division, laboratory instrumentation, and embedded control logic. The MC14024BF can count external events when the input signal remains within the electrical limits of its clock input. Its buffered outputs are particularly useful when one or more counter states must drive gates, indicators, or control signals independently. For reliable implementation, connect the reset to a defined inactive state, maintain clean clock edges, and observe the supply-voltage and temperature limits of 3 V to 18 V and -55°C to 125°C. Because ripple-counter outputs can change successively after a clock edge, downstream circuitry should not treat the seven outputs as a simultaneous encoded bus unless the timing requirements are specifically analyzed. This page combines the onsemi counter architecture with application guidance, verified parameter availability, comparison fields, and practical implementation notes. It helps engineers distinguish the MC14024BF from other counter functions and identify what must be checked in the manufacturer datasheet before releasing a PCB or production design.

طلب عرض سعر اتصل بنا
MC14029BD - 4-Bit Binary/BCD Up/Down Counter | onsemi
MC14029BD

MC14029BD - 4-Bit Binary/BCD Up/Down Counter | onsemi

The onsemi MC14029BD is a 4-bit binary/decade up/down counter built with complementary MOS P-channel and N-channel enhancement-mode devices in a single monolithic structure. The device supports binary counting and BCD operation, with four complementary outputs, an asynchronous parallel load function, and separate count-up and count-down clock inputs. It is packaged in a 16-pin SOIC for surface-mount assembly. A binary counter is a sequential digital circuit that stores or tracks a number of clock events and advances or reverses its state through a defined sequence of binary states. The MC14029B extends this category with selectable binary or decimal counting, making it a logic IC within the broader counter, divider, and clock-and-timing hierarchy. Its decade mode supports values from 0 through 9 before rollover, while binary mode supports a 4-bit count from 0 through 15. The counter consists of type-D flip-flop stages with gating that provides toggle capability. Separate count-up and count-down inputs allow the counting direction to be selected, and asynchronous load inputs provide a parallel mechanism for initializing the output state. The complementary outputs support both active-high and active-low counting signals, making the device suitable for modular counters, programmable timing systems, sequence generators, and industrial control logic. The MC14029B family is identified as a CMOS counter constructed from P-channel and N-channel enhancement-mode devices. CMOS construction is significant in digital systems because it supports low static power dissipation relative to the switching activity, while complementary logic can provide rail-to-rail output levels and noise margin benefits. The operating voltage, clock frequency, output current, and environmental limits should be taken from the manufacturer datasheet when designing a new circuit. Typical uses include bidirectional event counting, frequency division, decade sequencing, pulse-train generation, and embedded control logic. The binary/BCD selection allows the same physical counter to support both hexadecimal-style state progression and decimal displays or decade-based timing systems. In cascaded designs, multiple MC14029BD devices can form larger counters when the application requires more than four count bits. For PCB implementation, place the device close to the signals it drives and route clock, reset, load, and carry inputs away from sensitive analog or high-speed clock networks. The asynchronous load and reset controls should be checked against the system timing budget because their assertion can change the counter outputs independently of the counting clock. Decoupling requirements, maximum transition rates, and input logic levels must follow the manufacturer datasheet. This page combines the family-level device description, package information, a source-linked pricing record, compatible same-family references, and practical implementation guidance. It is intended to help engineers identify the correct counter function, verify the 16-pin surface-mount footprint, and plan logic-level, timing, and layout decisions before releasing a PCB.

طلب عرض سعر اتصل بنا
MC14029BF - 4-Bit Binary/Decade Up-Down Counter | onsemi
MC14029BF

MC14029BF - 4-Bit Binary/Decade Up-Down Counter | onsemi

The onsemi MC14029BF is a 4-bit binary/decade up-down counter built with complementary MOS P-channel and N-channel enhancement-mode devices in a 16-pin SOIC package. It supports positive-edge-triggered counting, operates in binary or BCD mode, and provides separate carry and borrow outputs for multi-digit arithmetic and digital sequencing. The MC14029BF is the F-package ordering code associated with the MC14029B counter family and is identified by onsemi as the MC14029B Binary/Decade Up/Down Counter. A binary/decade up-down counter is a synchronous logic circuit that increments or decrements a four-bit numerical state when clocked. Binary mode represents values from 0 through 15, while decade mode supports decimal counting from 0 through 9. In the broader electronics hierarchy, the MC14029BF is a counter IC, which belongs to the logic IC and digital semiconductor categories. Its architecture combines D-type flip-flop stages with gating that permits counting in either direction, making it useful for modular arithmetic, stepper-motor position tracking, frequency division, and programmable event sequencing. The principal feature of the MC14029BF is its bidirectional counting capability. A separate up/down control determines the counting direction, while the clock input advances the selected state on the active edge. The four parallel outputs Q0 through Q3 expose the current count for direct observation, decoding, display, or control. A cascade input allows multiple counters to form larger counting systems, and the carry and borrow outputs identify overflow or underflow conditions. A parallel load input supports initialization to a predefined count, while master reset provides a common clearing mechanism. Because the device is implemented in complementary MOS technology, it combines low-power operation with the voltage-level behavior expected from the MC14029B logic family. The counter can be used either as a binary counter or as a decade counter, allowing the same physical circuit to serve digital clocks, industrial sequence counters, and modular arithmetic functions. Because a cascade connection introduces propagation delay between stages, designers should account for settling time when interpreting overflow signals or when several stages must transition coherently. Typical uses include digital frequency dividers, programmable event counters, bidirectional position indicators, decade timing chains, and four-bit arithmetic sequences. In a cascaded display or timing system, one MC14029BF can count units while additional devices count tens and higher groups. The carry output can advance the next stage during an up-count, while the borrow output can decrement it during a down-count. A parallel-load path can also initialize the counter to a nonzero value, which is useful in presettable timers and sequence generators. PCB implementation should preserve the pin assignments of the 16-pin SOIC footprint and route clock and control signals away from sensitive analog or high-speed nets. The clock input is especially important in a counter because excessive clock-edge noise can cause false increments or decrements. Keep traces short, provide a low-impedance ground reference, and avoid placing slow control inputs immediately beside the clock net when the layout permits. Follow the manufacturer’s application information for recommended decoupling and unused-input treatment. This product page combines the manufacturer’s function description with package, pinout, sourcing, and engineering guidance. It also distinguishes the MC14029BF from related ordering codes while emphasizing that final replacement decisions require checking the complete truth table, timing limits, voltage limits, and operating-temperature requirements for the specific design.

طلب عرض سعر اتصل بنا
MC14040BD - 12-Bit Binary Counter, 3-18 V | onsemi
MC14040BD

MC14040BD - 12-Bit Binary Counter, 3-18 V | onsemi

The onsemi MC14040BD is a 12-stage ripple-carry binary counter operating from 3 V to 18 V in a 16-pin SOIC package. The device advances its count on the negative-going edge of the clock and provides twelve binary outputs for frequency division, event counting, timing, and sequential control. Its monolithic construction uses MOS P-channel and N-channel enhancement-mode devices, while an input wave-shaping circuit supports reliable clock handling. A binary counter is a sequential digital-logic component that stores an integer count and advances that count when triggered. The MC14040B belongs to the counter and divider hierarchy within logic ICs. Its twelve stages divide the input clock by powers of two, allowing Q0 through Q11 to represent successive binary bits of the accumulated count. This structure supports both binary counting and programmable frequency division when selected outputs are used as the feedback clock. The principal features include a 12-bit count capacity, negative-edge clock operation, 3 V to 18 V operating voltage, and 16-pin SOIC construction. The ripple-carry architecture provides multiple count taps without requiring a microprocessor or programmable logic device. Because the outputs are ordinary CMOS logic levels, the counter can be combined with gates, flip-flops, display drivers, and timing circuits in industrial control, instrumentation, and embedded systems. Operationally, the device accepts a clock transition at the CLK input and transfers state through twelve internal stages. A master reset input initializes the count, while the twelve Q outputs expose the binary count bits. The manufacturer identifies time-delay circuits, counter controls, and frequency division among the intended applications. Designers should account for propagation delay through the ripple chain when cascaded counters must present a coherent multi-bit count to downstream logic. The MC14040BD is suitable for industrial control and automation, frequency-divider modules, programmable timing references, digital time-delay circuits, event counters, and low-cost embedded sequencing systems. It is especially useful when a controller needs a repeatable binary count derived from an external clock without allocating a microcontroller input or software counter. For reliable implementation, route the clock and reset traces away from the Q outputs, keep the supply return path short, and place the normal bypass capacitor close to the supply pins. Confirm that the clock amplitude and transition times meet the operating requirements for the selected supply voltage, and account for counter propagation delay when multiple output bits are sampled simultaneously. This page combines the manufacturer device characteristics with package-level implementation guidance, comparison parameters, and application-oriented design notes. Those engineering details help engineers evaluate the MC14040BD for a new counter design before completing the PCB schematic, timing analysis, and qualification plan.

طلب عرض سعر اتصل بنا
MC14046BF - 1.9MHz Phase-Locked Loop IC | onsemi
MC14046BF

MC14046BF - 1.9MHz Phase-Locked Loop IC | onsemi

The onsemi MC14046BF is a CMOS phase-locked-loop IC with a maximum operating frequency of 1.9 MHz, supplied in a 16-pin SOIC package measuring 5.30 mm wide. The device combines two phase comparators, a voltage-controlled oscillator, a source follower, and a zener diode. Its phase-locked-loop architecture synchronizes an output signal with a reference input, making it suitable for frequency synthesis, frequency multiplication, frequency division, modulation, tone generation, and other clock-and-timing systems. A phase-locked loop is a feedback-control circuit that compares two signals and adjusts a controllable oscillator until the phase or frequency relationship reaches the required condition. The MC14046BF belongs to the PLL family within clock-generation and timing ICs. Its internal phase comparators detect differences between input signals, while the voltage-controlled oscillator varies its output frequency according to a control voltage. The source follower provides an interface to the timing network, and the zener diode supports stable operation in the intended CMOS supply range. The main feature of the MC14046BF is its 1.9 MHz maximum operating frequency. This makes the IC appropriate for signal-generation and synchronization tasks that do not require the multi-gigahertz rates of a modern fractional-N synthesizer. Its 16-pin SOIC package supports conventional surface-mount PCB assembly while exposing the comparator, VCO, source-follower, and zener functions needed for external timing components. The broad integration reduces the number of separate blocks required in a basic PLL implementation. In operation, the phase comparators evaluate the relationship between the input and feedback signals. Their control output is applied to the voltage-controlled oscillator through an external timing network, causing the oscillator to change frequency until the loop reaches its locked condition. The source-follower output can be used to develop a compatible feedback or timing signal. External resistors and capacitors determine loop dynamics, operating range, filtering, and startup behavior, so component selection and layout remain important parts of the design. Typical applications include FM and AM demodulation, tone decoding, frequency multiplication, frequency division, clock recovery, synchronized signal generation, and low-to-medium-frequency synthesis. The 1.9 MHz operating limit makes the MC14046BF especially relevant to communications, instrumentation, industrial control, audio-frequency systems, and embedded timing circuits where a flexible analog PLL is more suitable than a fixed-frequency clock oscillator. The primary design consideration is the external analog network around the PLL. Capacitor values, resistor tolerances, comparator polarity, VCO control-voltage limits, and loop filtering directly affect lock range and stability. Keep the timing and feedback paths compact, use a low-noise supply, and verify both acquisition and steady-state phase error across the required temperature range. This page combines the verified 1.9 MHz frequency and 16-SOIC package information with practical implementation guidance, selection criteria, pinout-status clarification, and same-package replacement analysis. These engineering notes help distinguish a usable direct replacement from a merely similar PLL before committing to a PCB redesign.

طلب عرض سعر اتصل بنا
MC14051BD - 8:1 Analog Multiplexer, 16-SOIC | onsemi
MC14051BD

MC14051BD - 8:1 Analog Multiplexer, 16-SOIC | onsemi

onsemi MC14051BD is a digitally controlled analog multiplexer and demultiplexer implementing an SP8T solid-state switch for routing analog signals. The device is specified for a 3 V to 18 V supply range, operates as a single 8:1 analog switch, and uses a 16-pin SOIC package. The D suffix identifies the lead-free SOIC ordering variant associated with the onsemi MC14051B family. An analog multiplexer is a semiconductor switch that connects one of several signal terminals to a common terminal according to digital address and enable inputs. The MC14051B family provides low ON impedance and very low OFF leakage, making it suitable for signal-routing applications in analog, industrial, communications, and embedded systems. Its control logic allows the selected analog channel to be changed without changing the source or destination circuitry. The MC14051BD uses three digital select inputs to address one of eight common analog channels, while an enable input provides active control of the switch. The select inputs determine which channel is connected to the common terminal, and the enable input provides a controlled way to disconnect or isolate the selected path. This arrangement supports signal selection, test-point routing, sensor multiplexing, and general-purpose analog switching. The MC14051B family is designed for positive supply operation from 3 V to 18 V. Its low ON impedance and very low OFF leakage help preserve signal integrity when switching between sources. Because the switch characteristics depend on supply voltage and signal amplitude, the application should be checked against the manufacturer datasheet for the complete electrical limits, temperature ranges, and dynamic behavior. Typical uses include data-acquisition systems, analog measurement interfaces, communications equipment, instrumentation, and embedded control systems. The 16-SOIC package supports conventional surface-mount PCB assembly while providing separate common, input, select, enable, supply, and no-connect terminals. The device is appropriate when a design requires eight analog channels to be routed through one common path. Designers should keep analog routing traces short, provide a stable supply reference, and account for injection charge and switching transients when the selected signal changes rapidly. The manufacturer datasheet is the authoritative reference for pin assignments, maximum ratings, recommended operating conditions, and application details.

طلب عرض سعر اتصل بنا
MC14051BF 8:1 Analog Multiplexer, 280 Ohm, 16-Pin SOIC | onsemi
MC14051BF

MC14051BF 8:1 Analog Multiplexer, 280 Ohm, 16-Pin SOIC | onsemi

onsemi MC14051BF is an 8:1 analog multiplexer and demultiplexer implemented as a digitally controlled analog switch. The device supports signal routing over a 3 V to 18 V supply range, features approximately 280 ohm ON resistance, and is packaged in a 16-pin SO EIAJ package. It is designed for selecting one of eight analog or digital signal paths through three binary control inputs, making it suitable for instrumentation, data acquisition, communication equipment, and control systems. An analog multiplexer is an interface IC that routes multiple signal sources to a common output or distributes one signal among multiple destinations. The MC14051B family uses CMOS-style bilateral switches, allowing analog signals to be handled across the operating supply range. In multiplex mode, three select inputs determine which of the eight channels connects to the common terminal. In demultiplex mode, the common terminal drives the selected channel, depending on the external circuit configuration and signal direction. The MC14051BF provides low ON impedance and very low OFF leakage current. The manufacturer describes the MC14051B, MC14052B, and MC14053B as digitally controlled analog switches, with the MC14051B implementing an SP8T solid-state switch. The low switching resistance is useful when connecting higher-impedance sensors, measurement inputs, or low-frequency control signals to a shared analog-to-digital converter or instrumentation amplifier. Because the common and channel terminals are bilateral switch paths, the device can be used for signal multiplexing, signal distribution, and circuit isolation. The three select inputs are decoded internally to select one of eight channels. Designers should ensure that select transitions do not create unacceptable transients when the connected signals can change rapidly, and they should account for off-channel leakage and parasitic capacitance when precision measurements are required. The MC14051BF is identified by onsemi with an operating temperature range of -55 °C to +125 °C in distributor listings and a 16-pin SO EIAJ package. The device is commonly used with 3 V, 5 V, 12 V, and 18 V supply systems. Its broad supply range and CMOS control interface make it suitable for industrial instrumentation, test and measurement, communication interfaces, audio routing, and embedded control systems. For PCB implementation, place the device close to the multiplexed signal source and the receiving circuit to minimize trace capacitance and analog crosstalk. Keep the common and channel routing reasonably short, provide a stable supply connection, and observe the manufacturer’s input voltage limits. The select logic should be driven by compatible CMOS logic and changed only after considering the signal states present on the connected channels. This page summarizes the manufacturer’s device description, distributor specifications, package information, application considerations, and verified replacement references for MC14051BF evaluation.

طلب عرض سعر اتصل بنا
MC14052BF - Dual 4:1 CMOS Multiplexer | onsemi
MC14052BF

MC14052BF - Dual 4:1 CMOS Multiplexer | onsemi

The onsemi MC14052BF is a dual 4:1 differential CMOS analog multiplexer with an on-resistance of 280 ohm, packaged in a 16-pin SO EIAJ surface-mount package. It combines two independently controlled 4:1 selectors in one IC, allowing eight analog inputs to be routed to two outputs while conserving board space. The device is suitable for instrumentation, signal routing, data acquisition, and test systems that require bipolar-compatible analog switching. An analog multiplexer is an interface IC that connects one of several input channels to a shared output path using digital address and control signals. The MC14052BF belongs to the broader multiplexer and analog-switch hierarchy, where its 4:1 configuration provides more input selection than a single-pole switch. Because one package contains two circuits, it can perform complementary selection, differential measurement, or redundant routing without requiring two separate switch ICs. The MC14052BF provides two switch circuits, eight analog input terminals, two analog outputs, four address inputs, and inhibit and enable controls in a 16-pin package. Its 280-ohm on-resistance makes it suitable for circuits in which moderate insertion resistance is acceptable. The manufacturer also identifies the MC14052BF as a pin-for-pin replacement for CD4051, CD4052, and CD4053 families, although their internal channel counts and pin functions must be checked before using that statement as a design rule. The architecture is based on complementary CMOS transmission gates, allowing analog signals to be connected or isolated under digital control. Address inputs select the active input path, while the inhibit and enable inputs provide gating for system-level control. The manufacturer datasheet also identifies low-noise operation of 12 nV per square-root hertz at frequencies of 1.0 kHz and above, making the device relevant to low-level analog measurement paths. Typical uses include multimeter and oscilloscope input switching, automated test equipment, sensor signal selection, communication-channel routing, and data-acquisition systems. Two internal selectors are especially useful when a system must compare two instruments, route complementary signals, or maintain control paths around a measurement chain. These applications benefit from centralized channel selection while requiring careful attention to address timing, enable logic, and off-channel behavior. Design with the MC14052BF by treating its control inputs as digital signals referenced to the same supply used by the analog path. Keep sensitive analog routing away from high-current switching nodes and provide a stable ground reference. Check signal amplitudes against the switch's operating limits, observe the required logic states for address, inhibit, and enable pins, and verify the package dimensions before footprint assembly. This product page consolidates the device's multiplexer configuration, package information, sourcing information, drop-in candidates, and practical engineering guidance. It also distinguishes documented pin-for-pin relationships from design decisions that still require verification of voltage ratings, logic levels, channel assignments, and application-specific performance.

طلب عرض سعر اتصل بنا
MC14053BD - Triple 2:1 Analog Multiplexer | onsemi
MC14053BD

MC14053BD - Triple 2:1 Analog Multiplexer | onsemi

onsemi MC14053BD is a triple 2:1 analog multiplexer and demultiplexer IC designed to route analog signals among multiple channels using digital control inputs. The device is identified as a 3-circuit IC switch with 280 ohm on-state resistance in a 16-SOIC package. According to the manufacturer product information, its supported analog signal range is 3.0 V to 18 V when VEE is no higher than VSS, making it suitable for conventional CMOS control and low-voltage analog signal routing systems. An analog multiplexer is a semiconductor switching device that connects one of several signal terminals to a common terminal. The MC14053B family provides three independent 2:1 selections, allowing multiple analog sources to be routed through one shared signal path. Digital select inputs determine which source or destination is connected, while the analog switches provide bidirectional signal paths suitable for multiplexed and demultiplexed operation. Key features include three independently controlled 2:1 analog switches, 280 ohm on-state resistance, operation over a 3.0 V to 18 V analog voltage range, and a 16-SOIC package. The manufacturer also identifies low-noise performance of 12 nV per square-root-hertz for frequencies up to 1.0 kHz. These characteristics make the device useful for sensor selection, measurement routing, signal conditioning, test systems, and other applications requiring controlled analog-channel access. The MC14053B is part of the CMOS logic family of analog switches. Its digital control architecture allows a microcontroller or logic controller to select among signal paths without changing the physical routing of the analog network. Because the device is bidirectional, the same switching network can support multiplexing, demultiplexing, signal swapping, and routing functions depending on the external circuit configuration. Typical applications include multiplexed sensor interfaces, instrumentation signal routing, data acquisition systems, communication equipment, and industrial control modules. In a sensor interface, the select lines can choose among several inputs before amplification or conversion. In a data acquisition circuit, separate control logic can direct different sources to a shared analog front end while minimizing the number of separate signal-chain channels. Designers should confirm the actual pinout, control truth table, supply limits, and input voltage limits in the manufacturer datasheet before layout. The unused selector and signal terminals should be handled according to the datasheet guidance, and the common analog path should be kept away from switching nodes and high-current return paths to reduce coupling and crosstalk. This page consolidates the manufacturer product information, package identification, channel configuration, on-state resistance, supported voltage range, and low-noise figure into a practical reference for engineers selecting an analog multiplexer. It also distinguishes device-level switching facts from parameters that must be confirmed directly from the datasheet.

طلب عرض سعر اتصل بنا
MC14053BF - Triple SPDT Analog Multiplexer | onsemi
MC14053BF

MC14053BF - Triple SPDT Analog Multiplexer | onsemi

The onsemi MC14053BF is a triple single-pole double-throw CMOS analog multiplexer with an operating supply range of 3 V to 18 V, an on-state resistance of 280 ohms, and a 16-SOEIAJ package. The device routes three independent analog signals through common digital address and inhibit-control inputs, making it suitable for instrumentation, data acquisition, communication, and test systems. An analog multiplexer is an interface IC that connects multiple signal sources to a shared processing channel. The MC14053BF belongs to the broader multiplexer and demultiplexer hierarchy, which sits within analog switches, interface ICs, and semiconductor signal-routing components. Unlike a mechanical selector, its CMOS switching elements are controlled by logic levels, allowing compact and repeatable signal selection. Key features include three 2:1 switching paths, a 3 V to 18 V analog operating range, and a typical on-state resistance of 280 ohms. The onsemi product information also identifies a pin-for-pin replacement relationship with the CD4053 function and a typical low-noise figure of 12 nV per square root hertz at frequencies up to 1 kHz. Lead-free packages are offered, making package selection important for environmentally conscious production programs. Internally, the MC14053BF uses complementary analog switches to select between paired inputs for each channel. Address logic determines the active throw, while the inhibit input provides a common control path for disabling the selected channels. Designers must maintain valid logic levels across the full supply range and account for off-state leakage, switching transients, charge injection, and the finite 280-ohm path resistance when setting source and measurement impedances. Typical applications include multiplexed sensor acquisition, audio routing, industrial control interfaces, communication equipment, and laboratory test systems. It is particularly useful when several low-frequency or moderate-bandwidth analog signals must share one amplifier, converter, or measurement channel. Its 280-ohm resistance can create source-loading error when driving a high-impedance amplifier or a comparatively low-impedance ADC input. A key design practice is to place the multiplexer close to the signal source, use high-impedance buffering where necessary, and validate the complete acquisition path for settling time and crosstalk. The data-select and inhibit traces should remain short and away from noisy clock or power-conversion nodes. Supply bypassing and return-current planning are also important because rapidly switching analog paths can inject transients into sensitive measurement circuitry. This product record combines manufacturer feature data with practical guidance for multiplexing, signal integrity, PCB implementation, and replacement selection. It also distinguishes true pin-compatible options from functional alternatives so engineers can reuse an existing 16-pin layout without overlooking control-logic, package, or signal-integrity differences.

طلب عرض سعر اتصل بنا
MC14060BF - 14-Bit Counter with Oscillator | onsemi
MC14060BF

MC14060BF - 14-Bit Counter with Oscillator | onsemi

onsemi MC14060BF is a 14-stage binary ripple counter with an on-chip oscillator buffer, supplied in a 16-pin SOIC package. It provides 14 binary counter outputs, a common reset function that clears all outputs and disables the oscillator, and an oscillator arrangement that supports RC or crystal timing networks. The clock advances the counter on a negative transition, making the device suitable for frequency division, timing generation, pulse counting, and periodic control functions. A binary ripple counter is a digital sequential circuit in which each counting stage drives the next stage. The MC14060BF belongs to the counter and divider hierarchy within CMOS logic ICs. Its integrated oscillator removes the need for a separate clock generator when a free-running time base is required. If an external clock is available, the clock input allows the circuit to operate as a divide-by-2 through divide-by-16,384 counter chain. The on-chip oscillator buffer supports both resistor-capacitor and crystal oscillator configurations. The onsemi datasheet also identifies a Schmitt-trigger clock input, which improves switching behavior when the clock waveform has a slow edge or appreciable noise. Buffered outputs are available from stages 4 through 10 and stages 12 through 14, providing usable drive capability for selected divider outputs in frequency-divider and timing applications. A common reset input places every counter output into the zero state and disables the oscillator. This behavior allows a system controller to establish a known timing origin, synchronize multiple events, or restart a periodic sequence. Each negative transition on the clock advances the count by one, and the 14 counter stages provide a total division ratio of 16,384 when the highest-order output is used. Typical applications include digital clocks and timers, industrial sequence controllers, periodic pulse generators, frequency dividers, phase-shift systems, and embedded control systems requiring a local time base. The 16-pin SOIC package also allows the counter to be used on conventional surface-mount control boards where a larger leaded package would be unnecessary. For reliable oscillator operation, keep the oscillator and clock traces short and place timing components close to the device. When using an RC network, validate component tolerance and temperature behavior across the intended operating range. For crystal timing, follow the manufacturer connection and load recommendations and maintain clean return paths to reduce false clock transitions. This product page combines the MC14060B functional description, package information, drop-in alternatives, comparison parameters, and practical oscillator and layout guidance to support faster component selection and implementation.

طلب عرض سعر اتصل بنا
MC14066BD - 3-18V Quad Analog Switch | onsemi | SOIC-14
MC14066BD

MC14066BD - 3-18V Quad Analog Switch | onsemi | SOIC-14

The onsemi MC14066BD is a 3-18 V quad analog switch and quad multiplexer integrated circuit packaged in a 14-pin SOIC. It contains four independent bilateral switches, allowing each switch to control either a digital or an analog signal. The MC14066B family is designed for signal gating, chopper, modulator, demodulator, and CMOS logic applications, while individual control inputs can switch signal excursions as large as the full supply voltage. An analog switch is a semiconductor device that routes a signal between circuit nodes under digital control. The MC14066BD belongs to the analog switch and multiplexer hierarchy, which sits within interface ICs and broader logic semiconductor systems. Unlike a mechanical relay, its switching action is controlled by CMOS-compatible logic and is intended for compact signal-routing implementations. Its four independent switches allow one package to handle multiple gated channels without requiring four separate single-switch packages. The key defining feature is the MC14066B family's pin-for-pin compatibility with the onsemi MC14016B. The manufacturer states that the MC14066B provides substantially lower ON resistance than the MC14016B while retaining compatibility between the two devices. Its 3-18 V operating range supports both lower-voltage CMOS logic systems and higher-voltage analog signal-routing systems. Each of the four switches has a separate control input, allowing independent routing decisions within one circuit. The MC14066BD uses parallel MOSFET-style switch elements to provide bilateral signal paths. A control signal determines whether the corresponding path is ON or OFF, and the switched signal can travel in either direction. This bilateral behavior makes the device suitable for signal gating, multiplexed test paths, chopper functions, modulation and demodulation stages, and general CMOS logic implementations where multiple analog or logic nodes must be routed independently. Typical uses include switching sensor outputs in industrial measurement systems, routing audio-range signals in test equipment, selecting external networks in control circuits, and implementing modulator or demodulator functions. Because the control inputs operate from the same supply family as the signal paths, system designers should account for input logic levels, permissible signal excursions, ON-resistance effects, and off-state leakage when choosing external bias and interface components. For PCB implementation, place the device so that switched signal traces remain short and away from high-current switching nodes. Use a common ground reference and provide a clean supply connection where logic thresholds matter. Confirm the exact pin assignment, electrical limits, and recommended operating conditions in the onsemi MC14066B datasheet before finalizing signal amplitude, control timing, and external resistor values. This page consolidates the manufacturer’s core switch characteristics, package information, pin-compatibility guidance, application contexts, and design considerations into an engineering-focused selection reference. It also distinguishes the verified MC14016B relationship from unsupported substitutions, helping designers identify where a board-level change can be evaluated without relying on a generic cross-reference listing.

طلب عرض سعر اتصل بنا
MC14071BDR2G - Quad 2-Input OR Gate, 3-18V CMOS, SOIC-14 | onsemi
MC14071BDR2G

MC14071BDR2G - Quad 2-Input OR Gate, 3-18V CMOS, SOIC-14 | onsemi

The onsemi MC14071BDR2G is a B-suffix series Quad 2-Input OR Gate built with P-channel and N-channel enhancement-mode CMOS transistors in a single monolithic structure, supplied in a 14-pin SOIC package. It contains four independent 2-input OR gates and operates across a wide supply voltage range of 3 V to 18 V DC, with logic-level compatibility across the full range. An OR gate is a fundamental combinational logic device that outputs a logic HIGH whenever at least one of its inputs is HIGH; four such gates share a common power rail in the MC14071B, forming part of the 4000-series CMOS logic family. This family sits within the broader hierarchy: logic gate -> combinational logic -> digital IC -> integrated circuit -> semiconductor. The MC14071BDR2G is widely used as a glue-logic building block in mixed-signal systems, replacing discrete transistors and providing reliable logic OR-ing where board-level routing is critical. Key features include extremely low quiescent supply current (typically 0.5 nA per gate at 5 V), high noise immunity of 45% of VDD minimum, and 5 V, 10 V, and 15 V parametric ratings per JEDEC JESD 20. Output drive is symmetric CMOS with balanced rise/fill characteristics and ESD protection on all inputs. The MC14071BDR2G's buffered-output architecture provides consistent fan-out and clean logic levels across the supply range, while inputs are diode-protected against over-voltage transients. The MC14071BDR2G uses a complementary MOS (CMOS) process in which P-channel pull-ups and N-channel pull-downs are co-integrated; this yields the family's hallmark near-zero quiescent current (current flows only during switching), making it ideal for battery-powered equipment. Designers can cascade gates for combinatorial logic, use the part as a logic-level translator between 5 V and 12 V domains, or wire OR multiple interrupt sources together for MCU monitoring. The 14-SOIC footprint is footprint-compatible with the rest of the MC140xx family, allowing easy migration to NAND, AND, NOR or XOR equivalents when board real-estate is reserved. Typical applications for the MC14071BDR2G include industrial control logic, automotive body electronics, battery-powered instrumentation, alarm-system OR-tying, and general-purpose glue logic in mixed-signal PCBs. The wide 3-18 V supply tolerates 12 V and 15 V analog rails, simplifying designs that interface to legacy analog sections. When designing with this part, observe standard CMOS handling precautions: tie all unused inputs to VDD or GND to prevent floating-input oscillation and extra current draw. The MC14071BDR2G is a direct functional replacement for the legacy CD4071B from Texas Instruments and is drop-in compatible on most 14-pin SOIC layouts.

طلب عرض سعر اتصل بنا