AD620ANZ vs INA121P مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ AD620ANZ بواسطة Analog Devices و INA121P بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Analog Devices
AD620ANZ - 1-Channel Low-Power Instrumentation Amplifier | Analog Devices
AD620ANZ UnknownTexas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ نشطمقارنة المواصفات
| المعامل | AD620ANZ | INA121P |
|---|---|---|
| العلامة التجارية | Analog Devices | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | Unknown | نشط |
| Product Type | Low-cost, low-power, high-accuracy instrumentation amplifier | — |
| Number of Channels | 1 channel | 1 |
| Gain Range | 1 to 10,000 | 1 V/V to 10,000 V/V (single external resistor) |
| External Gain Setting | One external resistor | — |
| Gain-Bandwidth Product | 1 MHz | — |
| Maximum Supply Current | 1.3 mA | — |
| جهد التغذية | [DATA_NEEDED: supply voltage range] | — |
| Input Bias Current | 2 nA | ±4 pA typical |
| Common-Mode Rejection | 110 dB | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | ±200 µV typical |
| Input Noise | [DATA_NEEDED: input noise] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| نطاق درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| العلبة | 8-lead PDIP | 8-Pin PDIP (P) |
| Package Family | PDIP family, through-hole DIP | — |
| نوع التركيب | Through-hole | Through-Hole |
| حالة RoHS | unknown | Compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Applications | Precision data acquisition, sensor conditioning, portable instrumentation | — |
| Amplifier Type | — | Instrumentation Amplifier (3-op-amp topology) |
| Input Type | — | FET / CMOS |
| Input Offset Drift | — | ±2 µV/°C typical |
| Input Voltage Noise Density | — | 20 nV/√Hz at 1 kHz |
| تيار السكون | — | ±450 µA typical |
| Common-Mode Rejection Ratio (CMRR) | — | 106 dB minimum |
| Bandwidth (-3 dB) | — | 600 kHz at G = 100 |
| Nonlinearity Error | — | 0.001% (G = 10) |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| Input Protection | — | ±40 V differential and common-mode |
| Slew Rate | — | [DATA_NEEDED: slew rate from datasheet] |
| Lead-Free Finish | — | Yes (Matte Tin) |