AD620ANZ vs INA121P Comparaison
Comparaison détaillée côte à côte de AD620ANZ par Analog Devices et INA121P par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
AD620ANZ - 1-Channel Low-Power Instrumentation Amplifier | Analog Devices
AD620ANZ UnknownTexas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ ActifComparaison des spécifications
| Paramètre | AD620ANZ | INA121P |
|---|---|---|
| Marque | Analog Devices | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Unknown | Actif |
| Product Type | Low-cost, low-power, high-accuracy instrumentation amplifier | — |
| Number of Channels | 1 channel | 1 |
| Gain Range | 1 to 10,000 | 1 V/V to 10,000 V/V (single external resistor) |
| External Gain Setting | One external resistor | — |
| Gain-Bandwidth Product | 1 MHz | — |
| Maximum Supply Current | 1.3 mA | — |
| Tension d'alimentation | [DATA_NEEDED: supply voltage range] | — |
| Input Bias Current | 2 nA | ±4 pA typical |
| Common-Mode Rejection | 110 dB | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | ±200 µV typical |
| Input Noise | [DATA_NEEDED: input noise] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Boîtier | 8-lead PDIP | 8-Pin PDIP (P) |
| Package Family | PDIP family, through-hole DIP | — |
| Type de montage | Through-hole | Through-Hole |
| Statut RoHS | unknown | Compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Applications | Precision data acquisition, sensor conditioning, portable instrumentation | — |
| Amplifier Type | — | Instrumentation Amplifier (3-op-amp topology) |
| Input Type | — | FET / CMOS |
| Input Offset Drift | — | ±2 µV/°C typical |
| Input Voltage Noise Density | — | 20 nV/√Hz at 1 kHz |
| Courant de repos | — | ±450 µA typical |
| Common-Mode Rejection Ratio (CMRR) | — | 106 dB minimum |
| Bandwidth (-3 dB) | — | 600 kHz at G = 100 |
| Nonlinearity Error | — | 0.001% (G = 10) |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| Input Protection | — | ±40 V differential and common-mode |
| Slew Rate | — | [DATA_NEEDED: slew rate from datasheet] |
| Lead-Free Finish | — | Yes (Matte Tin) |