AD620ANZ vs INA121P तुलना
विस्तृत दोनों ओर की तुलना AD620ANZ द्वारा Analog Devices और INA121P द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
AD620ANZ - 1-Channel Low-Power Instrumentation Amplifier | Analog Devices
AD620ANZ UnknownTexas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ सक्रियविशेषता तुलना
| पैरामीटर | AD620ANZ | INA121P |
|---|---|---|
| ब्रांड | Analog Devices | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | Unknown | सक्रिय |
| Product Type | Low-cost, low-power, high-accuracy instrumentation amplifier | — |
| Number of Channels | 1 channel | 1 |
| Gain Range | 1 to 10,000 | 1 V/V to 10,000 V/V (single external resistor) |
| External Gain Setting | One external resistor | — |
| Gain-Bandwidth Product | 1 MHz | — |
| Maximum Supply Current | 1.3 mA | — |
| सप्लाई वोल्टेज | [DATA_NEEDED: supply voltage range] | — |
| Input Bias Current | 2 nA | ±4 pA typical |
| Common-Mode Rejection | 110 dB | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | ±200 µV typical |
| Input Noise | [DATA_NEEDED: input noise] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| पैकेज | 8-lead PDIP | 8-Pin PDIP (P) |
| Package Family | PDIP family, through-hole DIP | — |
| माउंटिंग प्रकार | Through-hole | Through-Hole |
| RoHS स्थिति | unknown | Compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Applications | Precision data acquisition, sensor conditioning, portable instrumentation | — |
| Amplifier Type | — | Instrumentation Amplifier (3-op-amp topology) |
| Input Type | — | FET / CMOS |
| Input Offset Drift | — | ±2 µV/°C typical |
| Input Voltage Noise Density | — | 20 nV/√Hz at 1 kHz |
| क्वाइसेंट करंट | — | ±450 µA typical |
| Common-Mode Rejection Ratio (CMRR) | — | 106 dB minimum |
| Bandwidth (-3 dB) | — | 600 kHz at G = 100 |
| Nonlinearity Error | — | 0.001% (G = 10) |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| Input Protection | — | ±40 V differential and common-mode |
| Slew Rate | — | [DATA_NEEDED: slew rate from datasheet] |
| Lead-Free Finish | — | Yes (Matte Tin) |