BTS5215LAUMA1 vs ITS4200SSJDXUMA1 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ BTS5215LAUMA1 بواسطة Infineon و ITS4200SSJDXUMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
مقارنة المواصفات
| المعامل | BTS5215LAUMA1 | ITS4200SSJDXUMA1 |
|---|---|---|
| العلامة التجارية | Infineon | Infineon |
| الفئة | Power MOSFET Drivers | Power MOSFET Drivers |
| حالة دورة الحياة | نشط | نشط |
| Product Type | Smart High-Side Power Switch | — |
| Number of Channels | 2 | — |
| On-State Resistance (RDS(on)) | 90 mΩ typical per channel | — |
| Continuous Output Current per Channel | 3.7 A | — |
| Operating Voltage Range | 8 V to 36 V | — |
| Standby Current | Very low (datasheet value [DATA_NEEDED: standby current uA]) | — |
| Input Logic Compatibility | CMOS-compatible, ground-referenced | — |
| Diagnostic Feedback | Status feedback per channel | — |
| MOSFET Technology | N-channel vertical power MOSFET with charge pump | — |
| Load Type Support | Resistive and inductive loads | — |
| Protection Features | Overcurrent, overtemperature, overvoltage, short-circuit, undervoltage | Overload, current limit, short circuit, thermal shutdown with restart, overvoltage (load dump), undervoltage shutdown |
| Demagnetization | Fast demagnetization of inductive loads | — |
| العلبة | PG-DSO-12-9 | PG-DSO-8 (DSO-8) |
| درجة حرارة التشغيل | -40C to +150C (TJ) [DATA_NEEDED: ambient range exact] | -40 C to +150 C |
| حالة RoHS | Compliant | Compliant |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET (MINI-PROFET) |
| Switch Type | — | High-Side N-Channel, 1:1 |
| On-State Resistance (R_DS(on)) | — | 200 mOhm (typical) |
| Continuous Load Current | — | 1.2 A |
| Supply Voltage (Vbb) | — | 6 V to 52 V |
| تيار السكون | — | 0.8 mA |
| Maximum Power Dissipation | — | 1400 mW |
| نوع التركيب | — | Surface Mount |
| تكوين الخرج | — | Single high-side switch |
| Diagnostic Output | — | Status pin for fault feedback |
| Load Type | — | Resistive and inductive loads |