BTS5215LAUMA1 vs ITS4200SSJDXUMA1 So sánh

So sánh chi tiết song song của BTS5215LAUMA1 bằng Infineon và ITS4200SSJDXUMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BTS5215LAUMA1 BTS5215LAUMA1 - Dual 90mΩ Smart High-Side Switch | Infineon

BTS5215LAUMA1 - Dual 90mΩ Smart High-Side Switch | Infineon

BTS5215LAUMA1 ✓ Hoạt động
Infineon
ITS4200SSJDXUMA1 ITS4200SSJDXUMA1 - 1.2A Smart High-Side Switch | Infineon PROFET

ITS4200SSJDXUMA1 - 1.2A Smart High-Side Switch | Infineon PROFET

ITS4200SSJDXUMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BTS5215LAUMA1 ITS4200SSJDXUMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Smart High-Side Power Switch —
Number of Channels 2 —
On-State Resistance (RDS(on)) 90 mΩ typical per channel —
Continuous Output Current per Channel 3.7 A —
Operating Voltage Range 8 V to 36 V —
Standby Current Very low (datasheet value [DATA_NEEDED: standby current uA]) —
Input Logic Compatibility CMOS-compatible, ground-referenced —
Diagnostic Feedback Status feedback per channel —
MOSFET Technology N-channel vertical power MOSFET with charge pump —
Load Type Support Resistive and inductive loads —
Protection Features Overcurrent, overtemperature, overvoltage, short-circuit, undervoltage Overload, current limit, short circuit, thermal shutdown with restart, overvoltage (load dump), undervoltage shutdown
Demagnetization Fast demagnetization of inductive loads —
Hộp PG-DSO-12-9 PG-DSO-8 (DSO-8)
Nhiệt độ hoạt động -40C to +150C (TJ) [DATA_NEEDED: ambient range exact] -40 C to +150 C
Trạng thái RoHS Compliant Compliant
Manufacturer — Infineon Technologies
Part Family — PROFET (MINI-PROFET)
Switch Type — High-Side N-Channel, 1:1
On-State Resistance (R_DS(on)) — 200 mOhm (typical)
Continuous Load Current — 1.2 A
Supply Voltage (Vbb) — 6 V to 52 V
Điện áp yên tĩnh — 0.8 mA
Maximum Power Dissipation — 1400 mW
Kiểu lắp đặt — Surface Mount
Cấu hình đầu ra — Single high-side switch
Diagnostic Output — Status pin for fault feedback
Load Type — Resistive and inductive loads

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá