BTS5215LAUMA1 vs ITS4200SSJDXUMA1 Perbandingan
Perbandingan bersamaan detil BTS5215LAUMA1 dari Infineon dan ITS4200SSJDXUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | BTS5215LAUMA1 | ITS4200SSJDXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch | — |
| Number of Channels | 2 | — |
| On-State Resistance (RDS(on)) | 90 mΩ typical per channel | — |
| Continuous Output Current per Channel | 3.7 A | — |
| Operating Voltage Range | 8 V to 36 V | — |
| Standby Current | Very low (datasheet value [DATA_NEEDED: standby current uA]) | — |
| Input Logic Compatibility | CMOS-compatible, ground-referenced | — |
| Diagnostic Feedback | Status feedback per channel | — |
| MOSFET Technology | N-channel vertical power MOSFET with charge pump | — |
| Load Type Support | Resistive and inductive loads | — |
| Protection Features | Overcurrent, overtemperature, overvoltage, short-circuit, undervoltage | Overload, current limit, short circuit, thermal shutdown with restart, overvoltage (load dump), undervoltage shutdown |
| Demagnetization | Fast demagnetization of inductive loads | — |
| Paket | PG-DSO-12-9 | PG-DSO-8 (DSO-8) |
| Suhu Kerja | -40C to +150C (TJ) [DATA_NEEDED: ambient range exact] | -40 C to +150 C |
| Status RoHS | Compliant | Compliant |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET (MINI-PROFET) |
| Switch Type | — | High-Side N-Channel, 1:1 |
| On-State Resistance (R_DS(on)) | — | 200 mOhm (typical) |
| Continuous Load Current | — | 1.2 A |
| Supply Voltage (Vbb) | — | 6 V to 52 V |
| Arus Memerintah | — | 0.8 mA |
| Maximum Power Dissipation | — | 1400 mW |
| Tipe Mounting | — | Surface Mount |
| Konfigurasi Output | — | Single high-side switch |
| Diagnostic Output | — | Status pin for fault feedback |
| Load Type | — | Resistive and inductive loads |