BTS70021EPPXUMA1 vs ITS4142NHUMA1 مقارنة

مقارنة تفصيلية جنبًا إلى جنب لـ BTS70021EPPXUMA1 بواسطة Infineon و ITS4142NHUMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.

مقارنة المواصفات

المعامل BTS70021EPPXUMA1 ITS4142NHUMA1
العلامة التجارية Infineon Infineon
الفئة Power MOSFET Drivers Power MOSFET Drivers
حالة دورة الحياة نشط نشط
Product Family PROFET+2 12V —
البنية الطوبولوجية Smart High-Side Switch, N-Channel MOSFET 1:1 N-Channel High-Side
Maximum Continuous Load Current 21 A —
On-State Resistance (RDS(on)) 2.6 mOhm typical —
Operating Supply Voltage (Vbb) 6 V to 18 V —
Transient Supply Voltage 28 V (load dump tolerant) —
Standby Current [DATA_NEEDED: typical uA value] —
Current Sense Output (IS) Analog proportional load current —
Fault Output (DEN/IN) Yes, latched —
Reverse Polarity Protection Yes (ReverSave) —
Overload Protection Yes (current limit) Yes
Short-Circuit Protection Yes (latched) —
Over-Temperature Protection Yes (thermal shutdown with restart) —
Over-Voltage Protection (Vbb clamp) Yes —
Load Dump Clamp Voltage 41 V typical —
Open-Load Detection Yes (on-state and off-state) —
PWM Capability Yes, up to [DATA_NEEDED: max PWM frequency] —
نطاق درجة حرارة التشغيل -40 C to +150 C junction —
العلبة PG-TSDSO-14-22 (exposed pad) PG-SOT223-4 (4-pin SOT-223)
نوع التركيب Surface Mount Surface Mount
Qualification AEC-Q100 automotive qualified —
حالة RoHS Compliant (Green Product) Compliant
Manufacturer — Infineon Technologies
Product Type — Smart High-Side Power Switch
عدد المخارج — 1
Continuous Load Current — 1.4 A
On-Resistance (RDS(on)) — [DATA_NEEDED: typical RDS(on) at 25C]
جهد التغذية التشغيلي — 5 V to 34 V (load-dump tolerant to 45 V)
Logic Input Voltage — Logic-level, 3.3 V and 5 V compatible
Overvoltage Protection — Yes, including load dump
Undervoltage Shutdown — Yes, with auto-restart and hysteresis
Short Circuit Protection — Yes, with current limitation
الإيقاف الحراري — Yes
Diagnostic Feedback — Yes, open-drain status output
Inductive Load Switching — Yes, with internal clamping
درجة حرارة التشغيل — -40C to +125C (junction)
AEC-Q100 Qualification — [DATA_NEEDED: automotive grade variant status]

أوراق البيانات والموارد

تصفح جميع المنتجات إنشاء BOM طلب عرض سعر