BTS70021EPPXUMA1 vs ITS4142NHUMA1 Karşılaştırma

Ayrıntılı yan yana karşılaştırma BTS70021EPPXUMA1 tarafından Infineon ve ITS4142NHUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Özellik Karşılaştırması

Parametre BTS70021EPPXUMA1 ITS4142NHUMA1
Marka Infineon Infineon
Kategori Power MOSFET Drivers Power MOSFET Drivers
Yaşam Döngüsü Durumu Aktif Aktif
Product Family PROFET+2 12V —
Ağ Yapısı Smart High-Side Switch, N-Channel MOSFET 1:1 N-Channel High-Side
Maximum Continuous Load Current 21 A —
On-State Resistance (RDS(on)) 2.6 mOhm typical —
Operating Supply Voltage (Vbb) 6 V to 18 V —
Transient Supply Voltage 28 V (load dump tolerant) —
Standby Current [DATA_NEEDED: typical uA value] —
Current Sense Output (IS) Analog proportional load current —
Fault Output (DEN/IN) Yes, latched —
Reverse Polarity Protection Yes (ReverSave) —
Overload Protection Yes (current limit) Yes
Short-Circuit Protection Yes (latched) —
Over-Temperature Protection Yes (thermal shutdown with restart) —
Over-Voltage Protection (Vbb clamp) Yes —
Load Dump Clamp Voltage 41 V typical —
Open-Load Detection Yes (on-state and off-state) —
PWM Capability Yes, up to [DATA_NEEDED: max PWM frequency] —
İşletim Sıcaklığı Aralığı -40 C to +150 C junction —
Paket PG-TSDSO-14-22 (exposed pad) PG-SOT223-4 (4-pin SOT-223)
Montaj Türü Surface Mount Surface Mount
Qualification AEC-Q100 automotive qualified —
RoHS Durumu Compliant (Green Product) Compliant
Manufacturer — Infineon Technologies
Product Type — Smart High-Side Power Switch
Çıkış Sayısı — 1
Continuous Load Current — 1.4 A
On-Resistance (RDS(on)) — [DATA_NEEDED: typical RDS(on) at 25C]
İşletim Besleme Gerilimi — 5 V to 34 V (load-dump tolerant to 45 V)
Logic Input Voltage — Logic-level, 3.3 V and 5 V compatible
Overvoltage Protection — Yes, including load dump
Undervoltage Shutdown — Yes, with auto-restart and hysteresis
Short Circuit Protection — Yes, with current limitation
Termal Kapatma — Yes
Diagnostic Feedback — Yes, open-drain status output
Inductive Load Switching — Yes, with internal clamping
İşletim Sıcaklığı — -40C to +125C (junction)
AEC-Q100 Qualification — [DATA_NEEDED: automotive grade variant status]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin