BTS70041EPPXUMA1 vs BTS70021EPPXUMA1 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ BTS70041EPPXUMA1 بواسطة Infineon و BTS70021EPPXUMA1 بواسطة Infineon. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Infineon
BTS70041EPPXUMA1 - 15A Smart High-Side Switch, PG-TSDSO-14 | Infineon
BTS70041EPPXUMA1 ✓ نشطInfineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 ✓ نشطمقارنة المواصفات
| المعامل | BTS70041EPPXUMA1 | BTS70021EPPXUMA1 |
|---|---|---|
| العلامة التجارية | Infineon | Infineon |
| الفئة | Power MOSFET Drivers | Power MOSFET Drivers |
| حالة دورة الحياة | نشط | نشط |
| Part Family | HIC-PROFET +2 12V | — |
| Switch Type | High-Side N-Channel Smart Power Switch | — |
| العلبة | PG-TSDSO-14-22 (14-pin) | PG-TSDSO-14-22 (exposed pad) |
| Typical R_DS(on) | 4 mOhm at 25 °C | — |
| Nominal Load Current | 15 A (DC) | — |
| Operating Voltage Range | [DATA_NEEDED: operating voltage range] | — |
| Load-Dump Robustness | [DATA_NEEDED: load dump rating] | — |
| Input Logic Compatibility | 3.3 V and 5 V CMOS | — |
| Diagnostic Enable Pin (DEN) | Yes | — |
| Current Sense Output (IS) | Yes (analog proportional to load current) | Analog proportional load current |
| Embedded Protection | Over-current, short-circuit, over-temperature, reverse battery | — |
| PWM Capability | Yes (low-duty cycle supported via integrated charge pump) | Yes, up to [DATA_NEEDED: max PWM frequency] |
| درجة حرارة التشغيل | -40 °C to +150 °C (junction) | — |
| نوع التركيب | Surface Mount | Surface Mount |
| مستوى MSL | MSL3 (per JEDEC J-STD-020) | — |
| حالة RoHS | Compliant | Compliant (Green Product) |
| Automotive Qualification | AEC-Q100 qualified | — |
| Product Family | — | PROFET+2 12V |
| البنية الطوبولوجية | — | Smart High-Side Switch, N-Channel MOSFET |
| Maximum Continuous Load Current | — | 21 A |
| On-State Resistance (RDS(on)) | — | 2.6 mOhm typical |
| Operating Supply Voltage (Vbb) | — | 6 V to 18 V |
| Transient Supply Voltage | — | 28 V (load dump tolerant) |
| Standby Current | — | [DATA_NEEDED: typical uA value] |
| Fault Output (DEN/IN) | — | Yes, latched |
| Reverse Polarity Protection | — | Yes (ReverSave) |
| Overload Protection | — | Yes (current limit) |
| Short-Circuit Protection | — | Yes (latched) |
| Over-Temperature Protection | — | Yes (thermal shutdown with restart) |
| Over-Voltage Protection (Vbb clamp) | — | Yes |
| Load Dump Clamp Voltage | — | 41 V typical |
| Open-Load Detection | — | Yes (on-state and off-state) |
| نطاق درجة حرارة التشغيل | — | -40 C to +150 C junction |
| Qualification | — | AEC-Q100 automotive qualified |