BTS70041EPPXUMA1 vs BTS70021EPPXUMA1 比較

詳細並排比較 BTS70041EPPXUMA1 由 Infineon 與 BTS70021EPPXUMA1 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

規格比較

參數 BTS70041EPPXUMA1 BTS70021EPPXUMA1
品牌 Infineon Infineon
類別 Power MOSFET Drivers Power MOSFET Drivers
生命週期狀態 啟用中 啟用中
Part Family HIC-PROFET +2 12V —
Switch Type High-Side N-Channel Smart Power Switch —
封裝 PG-TSDSO-14-22 (14-pin) PG-TSDSO-14-22 (exposed pad)
Typical R_DS(on) 4 mOhm at 25 °C —
Nominal Load Current 15 A (DC) —
Operating Voltage Range [DATA_NEEDED: operating voltage range] —
Load-Dump Robustness [DATA_NEEDED: load dump rating] —
Input Logic Compatibility 3.3 V and 5 V CMOS —
Diagnostic Enable Pin (DEN) Yes —
Current Sense Output (IS) Yes (analog proportional to load current) Analog proportional load current
Embedded Protection Over-current, short-circuit, over-temperature, reverse battery —
PWM Capability Yes (low-duty cycle supported via integrated charge pump) Yes, up to [DATA_NEEDED: max PWM frequency]
工作溫度 -40 °C to +150 °C (junction) —
安裝類型 Surface Mount Surface Mount
MSL 等級 MSL3 (per JEDEC J-STD-020) —
RoHS 狀態 Compliant Compliant (Green Product)
Automotive Qualification AEC-Q100 qualified —
Product Family — PROFET+2 12V
拓撲 — Smart High-Side Switch, N-Channel MOSFET
Maximum Continuous Load Current — 21 A
On-State Resistance (RDS(on)) — 2.6 mOhm typical
Operating Supply Voltage (Vbb) — 6 V to 18 V
Transient Supply Voltage — 28 V (load dump tolerant)
Standby Current — [DATA_NEEDED: typical uA value]
Fault Output (DEN/IN) — Yes, latched
Reverse Polarity Protection — Yes (ReverSave)
Overload Protection — Yes (current limit)
Short-Circuit Protection — Yes (latched)
Over-Temperature Protection — Yes (thermal shutdown with restart)
Over-Voltage Protection (Vbb clamp) — Yes
Load Dump Clamp Voltage — 41 V typical
Open-Load Detection — Yes (on-state and off-state)
工作溫度範圍 — -40 C to +150 C junction
Qualification — AEC-Q100 automotive qualified

資料表與資源

瀏覽所有產品 建立 BOM 索取報價